RAM with Satellite P300 problem

Similar Questions

• Satellite P300 - problems with the buttons of enlightenment

  First of all, I would like to apologize for my bad English, I'm French actually.

  Hi, I bought a laptop Satellite P300, a couple of days, and already I have a problem with tactile keys (one on top of the keyboard).

  Actually, the only one of the left, which is supposed to turn off the sound used to keep away the keys lights and Satellite logo. One day (and I don't know why), when I pressed her, she actually cut the sound. And now, the first two keys (mute and shortcut of windows media) do not work, but the other four (Media Player control).
  I tried Toshiba Assist, and the tool for the configuration of the pushbuttons (I don't know the English name of this tool) but I couldn't set the keys, they were not on the list "button name".

  So, does anyone have an idea how to solve this problem?

  I apologize again for my English.

  Hello

  I assume you are using Windows Vista because you bought the laptop a couple of days and so I think that you should try to reinstall the Toshiba value added Package. This package determines the buttons of the lighting that you mean and others (for example the FN keys too).

  The latest version, you can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  1. download the latest PPV on the Toshiba site
  2. go in Control Panel > Add/Remove programs. Find the Toshiba value added package and remove it
  3. restart the laptop
  4. download and install CCleaner. This cool cleans up the registry of Windows and system files. He should find some registry keys of Toshiba you should remove with CCleaner.
  5 reboot the laptop
  6. install the PPV that you already downloaded
  7 restart once again

• Problems starting with Satellite P300 - 19K

  I have a portable Satellite P300 - 19K 1 month.

  Several times since I got it when I booted my system and got the password to logon windows my screen became a series of coloured horizontal lines and the Hung system completely. The only solution was to close by holding power button for 5 seconds. Screen start then on reboot that I would get in the trunk, but that did not work. Then, I learned that if I use the F8 key just I hit the power button I can get into a lot of upgraders and I was able to recover using the restore system but every time I lose a few programs that I need to reinstall.

  What has now happened 4 times in a month and becomes boring. I downloaded the latest display driver for the display of my card ATI Mobility Radeon HD 3650, but when I went to install it I learned the version I have on board is the same and everything is beautiful.

  Someone had something similar or have a solution?

  Hello

  If this happens with own pre-installed Vista (factory settings), please contact the nearest service provider and ask for help.
  Please do not test with some additional drivers. It WILL work properly with the factory settings.
  Addresses and phone numbers for ASP you will find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  Good luck!

• Touchpad on the Satellite P300 problem - 15 d

  Hello world!!

  I bought a Satellite P300 - 15 d and I am experiencing some problems with the touchpad.

  I simply turn on the pc, and sometimes the touchpad doesn't work, sometimes not.

  I tried the FN + F9 key, but it just doesn't work. Even the touchpad appears in the list of system devices.

  I find that the web and this Toshiba forum supported by aid, but I've not found anything related.

  Please help me!

  Look like a hardware problem that should be checked by a technician or an authorized service provider.

  If I were you I would click [here: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871], look for the nearest ASP in your country and send my machine to them to fix this.

  Welcome them

• Satellite P300 - problem after BIOS update

  Hello
  I have:
  Satellite P300-20 b
  PSPCCE-05J011RU
  I updated my BIOS with this update of the BIOS of your site (30/04/09, 3, 40 - WIN version)
  My problem is:
  Loading and relocation of attempt of Windows, the following error message is fixed:

  "Technical information:
  STOP: 0 * 0000007 B(0*F78DE524,0*C0000034, 0*00000000, 0*00000000)'

  So I can't respond to a portable computer HARD drive, the HARD drive is defined in the BIOS.
  Also I checked the HARD drive on the virus, it's pure against viruses.

  Could you help me to update the BIOS to a working condition.

  Hey Buddy,

  This stop code means you use a bad SATA controller driver. The installation of XP, to integrate the SATA driver for install XP. There is a lot of discussion on this issue here in the forum.

  For Intel chipset, you will need to download Intel Storage Manager of Toshiba's official site and follow the instructions here to reinstall Windows with the SATA drivers:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  Solution replacement follow the instructions posted by peterk_1. Setting IDE mode instead of AHCI in the BIOS will help too :)

• Games on Vista - Satellite P300 problems

  Hey.

  I just bought a Toshiba Satellite P300-1This comes with Vista Home Premium. The problem is that I can't run any game on it. I tried NFS Most Wanted, Battlefield 2 and Titan Quest(theoretically I should have no problems with my configuration-processor P8400, video Ati 3650, drivers up to date).

  When I try to launch the game, I get a black screen and the computer crashes, I need to restart. Any ideas?

  Have you installed SP1 for Vista and all the other patches?

  Are you sure that the drivers up to date? Check this on the Toshiba site and you must use the graphics driver Toshiba because they have protection against overheating.
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Do you have an antivirus program? Try turning it off while you play games.

• Problem of Extension of RAM with Satellite Pro 6050

  Hello

  I bought 2 RAM sodimm 512 MB kingston KVR266X64SC25/512.
  When I insert one of them with is a sodimm RAM (128 MB), the departure of SP6050 without problem, and the bios shows the amount of Ram is 640 MB (the 2 Ram sodimm is ok)

  But when I insert the two kingston sodimm Barrette, it do not start: there is no noise, there is no system, no configuration check.

  Thank you for your help

  Titi

  Hello

  He s strange because I checked the maximum memory that you can use and it s 1024MB. In this case, it should be possible to use 2x512MB.
  The unit uses DDR - Ram modules. This is a problem.

  I also checked these modules and the modules support has recommend:
  PC2100 128 MB (PA3126U - 1 M 12)
  PC2100 256 MB (PA3127U - 1 M 25)
  PC2100 512 MB (PA3164U - 1 M 51)

• Compatibility RAM with Satellite M70 354

  Hello

  I have the laptop model Toshiba Satellite M70-354 with Samsun 2 * 512 MB RAM DDR2 * pre-installed.
  There is the description on RAM - * DDR PC2 4200 *.

  I want to up-grade/replace my RAM to 2 GB.
  I brought again * 2 GB of RAM of the Transcend.
  Disription written the i.e. - * DDR2 667 *.

  I want to know that i * s this RAM is compatible * with my laptop?

  Can someone provide me with support on the same?

  Thank you

  Chirag

  Machine tender specifications for this old compatible RAM modules are:
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

  If you want to use max supported 2 GB I recommend to use 2 x 1 GB (PA3411U-1M1G).
  These modules are tested and 100% compatible.

• Power supply with Satellite M30x problem

  When I connect my Satellite M30X in power, he sometimes shows the power light and the battery light. It can then be turned on and will start and run.
  Most of the time the power light blinks and the battery light stay out: it will not illuminate.

  When it turns on, it will work for a period of a minute or two till about 4 hours and stops randomly.
  Now the led starts flashing and continues to Flash while it is powered.

  There must be some problem with electronic control gear. Strange is that this problem occurs from time to time.
  Sorry, but if you want to get rid of it you must contact Toshiba service and let check your laptop.

  To be honest, it can happen that
  Entire motherboard must be exchanged, and it can be quite expensive. Might be time for the new laptop computer. Satellite M30 is really old.

  What do you think of all this?

• Recovery with Satellite L300 problem

  I have a problem trying to restore my laptop Toshiba Satellite L300 to factory settings back!

  OK so basically, my laptop Toshiba Satellite screwed up and I even turn the thing!
  After a while, I was able to 'Restore factory settings' and then after typing my name and my Pc name etc., and after the latter had analyzed what it scans, it says "step 2: finish Prcoess Installation may take several minutes.» Do not interrupt or stop ' or or whatever it says...

  Anyway, I don't know, but it seems to be stuck on this screen! I left it for like 30/40 minutes and it always did, so I turned it off by the button. Now when I turn it on, I can't do anything until there finishes this installation, but when I try to leave it, it doesn't do anything!

  Help, please!

  Additional details
  I don't have a recovery disc! I restore or retrieve or another of the original on the HARD drive when you press F8 at startup to the top

  Any help appreciated

  Thank you, Andy

  Post edited by: ADMIN

  Hello Andy

  Unfortunately there is not some sort of magic bullet. A recovery facility works or not and there is no way to make it work somehow.

  What you can do is to start the installation of recovery even once, if possible. Please do so and send feedback.

  To be honest I don t understand why you didn't create Toshiba Recovery DVD s advice. If something goes wrong with the HARD drive or HARD drive recovery image can not be used you will be able to use recovery DVD for installing the OS.

• Audio driver with Satellite A200 problems

  I installed XP + SP2 on a Satellite A200 successfully. I have downloaded all the drivers from the official site, but even though I installed the drivers for the sound card, the system does not recognize a sound card, no indication of speakers to the taskbar. Also, I installed the driver for the modem, but under the control panel modems, there isn't any modem.

  Hello

  I also had this problem on my Satellite A210.
  The problem was that I didn t install two important patches from Microsoft. * KB888111 and KB835221 *.

  This patch must be installed before installing the audio driver.
  If you have already installed the audio driver please remove TI (remove the soundcard from Device Manager).

  Then, install the patches mentioned and after reboot short you could follow with Realtek sound driver installation.

  This helped me and I'm sure he will also help you 100%.

  Goodbye & good luck

• Keyboard and beep on startup with Satellite A80 problem

  Satellite A80 continuous beep on startup after the keyboard does not work. He writes only

  Post edited by: habib00

  Hello h,.

  I suggest you to bring your machine to a local service partner, or at least by a technician who is familiar with toshiba laptops, because your question looks quite related to the material.
  Someone pour some liquids above? I had the same problem a few years ago that my sister pours coke on the keyboard of my satellite 2430. :(

  Would like to hear a response from you :)

  Welcome them

• Satellite P300 - problem on Windows 7 32 bit card reader

  Hi guys,.

  installed Win 7, 32 bit. Installed drivers of the devices of ll, no errors in Device Manager.

  But by Windows session (start / stop) I can only use the O2 card reader (SDHC Sandisk 16 Gb) once.
  No matter if I just pull out the card or use the "Windows cleaner" way to eject of the plateau, the next time this same session if I insert the card, without drive letter is created in Windows Explorer.

  If I look in Device Manager then, an error 38 with exclamation point is presented, based on "pilot has been loaded before but not discharged.

  Then I can just have a glance at the card again if I have first to restart Windows. Becoming a very annoying problem, because I tend to have the laptop on standby, do not close normally.

  Is there advice here?

  Hey,.

  Have you tried to update the driver of the card reader? If not you should do this because normally the error code 38 means that the driver can t be loaded for this device correctly. Resettlement should work
  Read here for more details: http://support.microsoft.com/kb/310123

  You can download the latest version here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Good luck! :)

• Loading with Satellite C650 problem - SOLVED

  A big thank you to this forum.

  I went through a lot of answers and it really helped me think about my problem and solve it by myself.

  Thanks again!

  Could you please provide more detail?
  How did you solve this problem?

  Please post a step by step solution because it might be interesting for the other here in the forum!
  Thank you!

• Digital camera with Satellite L30 problems

  Recently bought a Pentax digital camera.

  When I try to view pictures taken with a camera on my L30, a message appears "locate and install driver software.
  I click Yes, another message appears - insert disc that came with your Pentax camera, what I'm doing.
  Finally another message - cannot install Pentax Optio M40, Windows is not found software driver for your device. I visited the Pentax site and contacted them and they told me that if I (preloaded) OEM of Windows I have to contact my computer manufacturer because the OEM versions are adapted to the computer on which it is installed.

  Where is can this question - anyone help?

  I'm really confused and I have to say that Johnny is quite right. Part 3 producers of software must adapt own software for the most used operating system. Hardware manufacturer has nothing to do with these programs.