Memory and the disk presents 99% usage in Task Manager

Similar Questions

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• Using issue view file when you use mp3s on the internal memory and the memory microSD external

  (1) if I have folders of mp3 on the player's internal memory and on the external drive microSD memory, can I use the folder to view all folders on the 2 memorys simultaneously integrated on one list or do I have to go through the files on each memory separately.

  (1) if the answer to question 1 is Yes, then I would like to now if I can have on the internal memory and external memory records with the same name, but with different files and the player will display these folders with both files on the internal memory and the external.

  I want to know because I like to browse through the files, and if the internal memory is full, I wish I could add more files in the folders where the internal memory by making a folder with the same name on the micro sd, and I don't like to go through the files on 2 devices at the same time, just on 1 list.

  Help, please.

  Thanks in advance

  The Clip + Treaty internal and external cards in 2 separate sources, under the folder view (it is quite logical, when you think of him, and just as 2 separate cards on your computer).  And if you look at the 2 lists separately (again, just like on your computer).  When you view your files using ID3 tags, both internal and external map content is merged in 1.

  If you do not have to see 2 separate lists, you can simply keep most / all of your content on the map either internal or external (even by, if you were really dead set on it, for example get a 2 GB Clip + and then using 8 or 16 GB external with her new card).

• Cannot access the disk in the drive E:, please make sure that the drive is ready and the disk is not write protected.

  When I try to backup Quicken, I received the error: cannot access the disk in the drive E:, please make sure that the drive is ready and the disk is not write protected.  My last backup of Quicken was 16/07/2010.  I don't know why I can't back up now.  Is there a way to fix this?

  Why not save to a folder on your hard drive and burn them to a CD - R from there? I can't tell from the little you wrote if the problem is with Quicken (not work or you have incorrectly backup location) or with your CD - RW drive. How about more details to work with? This will give you an idea of what to write:

  The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  MS - MVP - Elephant Boy computers - don't panic!

• Memory and the use of the disc on my IDS 4235 sensor & 4250.

  My ID sensor memory usage shows a use of 99%, and the hard drive is already 5 of the 15 Gig. Here is the log of "seeing the worm."

  With the help of 398913536 of 1980493824 memory available bytes (99% of use)

  With the help of 5 of the 15 bytes of disk space available (66% of use)

  -only the signature of med and high seriousness is enabled. Why the sensor used this memory?

  -Is this the sensor has IDS to a database that stores the logs which causes the hard drive used space? (considering that she has the management of the IDM)

  - Or any other reason why the hard drive used whereas the large drive space is new and operating time is 2 months?

  -Update of the signature file is adults who took over this large space on the HARD drive?

  Hope - could someone give me an idea why is it so.

  As I said earlier, there is not a problem with the use of disk space. Memory usage bug is fixed in the 5.X product not 4.X. However, there are some good bug fixes in the patch of engineering 4.1(4g).

  The number of real memory usage can be determined from the service account by entering the following command:

  Bash-2, $05 free

  total used free shared buffers cached

  MEM: 1934076 1424896 509180 0 18284 1214536

  -/ + buffers/cache: 192076 1742000

  Swap: 522072 0 522072

  The "Mem:" line and the column 'pre-owned' is the amount of memory (in kilobytes) that

  the command reports "show version". However, this total includes the

  amount 'caching '.

  So in the example above, the actual memory used is (1424896-1214536), or

  210360 KB. It is (210360 / 1934076 * 100), or 10.9% of total memory.

• Total physical memory and the total virtual memory

  Hello

  When I checked the repressive information of my laptop computer on which Windows XP SP3 installed, I discovered that RAM is of approximately:

  Total physical memory: 2.048 MB
  Available physical memory: 1.32 GB

  Total virtual memory: 2 GB
  Total available memory: 1.96 GB

  As this screen shot in Arabic shows:

  

  I don't really know what mean these four memories.

  It would be very much appreciated

  Physical memory is actual RAM that is installed inyour PC is fast enough with respect to access to the data

  Virtual memory is not physical in terms that you can't touch it or remomve it. Vitutal is a section of hard disk space unused which is used on-site for faster physical memory that your PC does not have memory.

  Because the hard drive is slower interms of access data to physical memory, your PC will see improved performance by adding or replacing existing physical memory with amounts more or more (512 MB or more)

  Virtual memory allows your computer to always run, but at a slower speed when you run applications that have used all of the physical memory. Remember, even before starting a program already running the operating system and other services which each allocate a block of physical memory for themselves. You can see exactly how much is used by pressing CTRL-ALT-DEL and display of the process tab and the performance tab.

  You can easily determine what your need to add to your PC memory by visiting a site like Crucial.com which allows you to scan your pc for the type of memory used.

• How Profilling memory in the java application BB usage?

  Hi all

  I want to know is it possible to profile memory usage of an application (process) in the java program of The BB. I want to check that the memory of the uses of my app in my code.

  Can someone help me?

  Thanks for your help.

  The JDE has a high profile tools that I'm sure will do what you need to do.  You will find that he documented in the JDE, in the BlackBerry Java Applications debugging.  The general process (or at least, how I usually use) is to set a breakpoint at the beginning and at the end of the code I want to analyze.  When I hit the breakpoint in the beginning, I reset the stats, let it go all the way and then to spot the differences!

• Satellite C650D - a high utilization of the processor and the disk

  Hello

  Quite often get 'high 100% CPU usage' or "High use of the disc" message using IE9 or various other applications. Computer seems to work ok although slow do not very often. Scanned with Norton Internet Security 2011 and ok. Malware problem?

  Any suggestions would be helpful.

  Mrpringle

  Hi mrpringle,

  What program tells you that you have a high utilization of the processor and HARD drive? I never heard about these messages and it would be interesting to know what program it is.

  What operating system you are using?

  Please take a look in the task manager what process causes high usage.

• Can I upgrade the memory and the graphics card on Satellite A60

  Hi all..
  I have a satellite a60 652.
  I want to improve it with new ram and graficcard.
  can I use more than 1, 5 GB of ram? later with an update of the bios?
  and if I can change the graficcard? If the answer is Yes... What is the best card I can actually use?
  or is there a map which is almost a geforce 7600 or 6600 (or ati 9700) I can use?

  Thank you for the help
  Ingo

  PS excuse my English ;)

  > I want to upgrade the ram and the new graphics card

  Upgrading RAM is possible but the graphics card is unable to be updated!

  If you want to upgrade the memory you could update to 1536 MB max.
  The A60 supports 512MB internal memory and it is so that one memory slot where the extra RAM module can be inserted.

  These modules are compatible:
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  Concerning

• Computer automatically restarts and the disk driver hard name question.

  Original title: my PC has 2 problems

  Hi guys, I'm going to talk about my PC has 2 problems.

  1. The problem is when I turn on my computer and boot my system, after 20 minutes I'm playing games, it auto restart my PC several times. 2 weeks ago, my old diet was very serious problem and the cause cannot start my PC, so I bought one to replace. Until a few days ago, it worked with my PC. He still now, have the same problem, but that sometimes he can't start several times and then she came back to do it again. I thought that it will more work and not a problem. I am very nervous and furious...! >:(
  2. Another problem is that my drive hard(location is C:\), it cannot load my system sometimes as the first problem earlier. Not only that, when it is started my PC, I checked all my hard drivesof driver name(I have 2 HARD drive, everything is very old)right click on C:\, click 'Properties' and then click 'Material' tag for the driver name lists. I don't see a single HARD drive driver name(it's in D:\), not on C:\ Name of the driver drive HARD, but in 'My Computer', it takes C:\ icon to click. I don't know why a few months ago, it has worked until now, one is missing and we're still on the list of driver name.

  Hope everyone give me help.

  Hi Billy,

   
  1. do you get an error message/code?
  2. What is the brand and model of the computer?
  3. How many partitions on each disk hard you?
   
  -For the first issue with computer restart automatically, follow the steps in method 3: disable automatic system failure reboot from the link:
  How to solve problems of hardware and software drivers Windows XP
  http://support.Microsoft.com/kb/322205#M3
   
  If the problem persists, see the event viewer for the detailed error message.
  Follow the link for the procedure:
  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427
   
  -For the second question, I suggest you to run a check disk and find if it helps.
  Reference:
  How to perform disk error checking in Windows XP
  http://support.Microsoft.com/kb/315265
  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
  Also check if all of the hard drive and the drive letters are displayed correctly.
  Follow the steps to access disk management:
  a. click on Start and then run.
  b. type diskmgmt.msc in the text box and press the enter key or press the OK button.
   
  If the problem persists, you can write to us and we will be happy to help you further.

• Acer R 13 allows to upgrade the default memory and the hard drive?

  I'm looking for an ultra portable to value 13-inch widescreen. Ideally, I'd like something with 16 GB of memory, WQHD or upper screen and 500 GB + SSD. I've been eye-ball the R7 - 371 T-78XG.

  The R7 - 371-T - 78XG allows for memory and hard drive expansion?

  Thanks for your time

  There is no time slots. There is no memory dimm/stick to replace. Memory is soldered to the motherboard.

• Computer does not load Windows. (Missing\corrupt file and the disk read error)

  I woke up this morning and my computer screen said:

  "Read a disk error has occurred."
  Press Ctrl + Alt + Delete to restart»

  So I did, and he just keeps it again and again. I turned off my PC, disconnected from the power and took out the battery. EXPECTED, put everything back in and turned on the computer. This time he made a lot of strange beeping noises and took forever and then I got this error:

  "Windows was not start because the following file is missing or damaged:
  \SYSTEM32\NTOSKRNL.exe
  Please reinstall a copy of the above file.

  I pressed on enter and it gave me the error reading disc again.

  Yesterday I updated my BIOS. So I also tried to go to my BIOS screen and "Load factory default settings", but I always get errors that I said just above and windows does not load.

  Help =)

  Hello I would wait until you try to do the repair first

  Make sure that the hd is just a notebook size hd
  Make sure that the speed is the same thing that you already size is really for you
  before you start to have a complete set of installation discs for the mfgr
  If you only use the os disk you will not load the microsoft embedded key encode any additional programs the mfgr installed or modified specially for your computer model and the party in the form of hard disk, you will need to do it yourself the format should be identical to the new factory
  uninstall all the equipment installed after you bought the computer (you must add once installation is complete)

• verification of the file system and the disk check

  I always thought I knew.
  But I'll have more in addition to the doubts and uncertainties.

  When is to perform the verification of the file system?
  When is to perform the disk check?

  t-4-2

  Hello

  SFC/scannow - run when you suspect that there may be a file system corruption as it will check the digital
  Signatures. Of course, SFC will attempt to overwrite any file that is not signed correctly. For many errors
  It should be considered a first step in the effort to repair.

  How to repair the operating system and how to restore the configuration of the operating system to a previous version
  point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  System File Checker
  http://msdn.Microsoft.com/en-us/library/aa382541 (vs.85) .aspx

  System File Checker
  http://en.Wikipedia.org/wiki/System_File_Checker

  ==================================================

  CheckDisk (chkdsk) should be run every time you think that hard drive corruption as possible which could be
  1 file on the disc as it verifies the logical integrity of the disc. My preference is to run it also
  SFC is executed at any time, especially if there was any found errors.

  This explains how Vista and Windows 7 checkdisk (chkdsk)

  An explanation of CHKDSK and the new /C and /I switches
  http://support.Microsoft.com/kb/187941

  Chkdsk
  http://en.Wikipedia.org/wiki/chkdsk

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• What is the difference between the terms "system" disk and the disk of "boot"?

  I have a Setup to dual-boot with Win7 on 2 hard drives so I can choose which drive I want to work with the Win7 OS (long explanation on why it's like that, but it works best for me).  In the management of disk/storage/computer management console, the disks have descriptors which: "Healthy (System, boot, Page File, active, crash dump, primary Partition)" - for the selected disc on the screen of choice of Dual Boot OS, and 'Healthy (active, primary Partition)' for the drive with the operating system not selected in the display to Dual boot.  I understand all the terms except 'system '.    'System' is always indicated on the disk that is designated as the startup in THE BIOS disk, regardless of the choice of OS in Dual boot screen.  For example, if I select the operating system to dual boot screen that is on the other drive (not designated as the startup disk in the BIOS), there the descriptors "in good condition (boot, Page File, active, crash dump, primary Partition)", while the disc selected in the BIOS as primary boot drive will tell "healthy (System". (, actif, Partition principale) ".  I don't know if the term "System" refers to the fact that the drive is the main in the BIOS, or if it refers to the location of the operating system.   I'm setting up automated backups and need to know on which disk the operating system is operational - I guess that he should be the one selected to dual boot screen, but the 'System' descriptor on the other drive is confusing.   Thank you, I of course would like to have clarification.

  Hello
  Too bad this naming convention is therefore against intuitive, but the "System" partition on a windows computer is where files needed for the computer to 'boot '.  It is normally the first partition on the first drive listed by the bios of the computer.  The partition of a windows computer "Startup" may be localized to more than any other disc and contains at least the files for the windows operating system.  Looks like you have a system dual boot where one of your windows 7 version is installed on the first primary partition which is where the necessary files to the computer to 'boot', that's why in every case, it is identified as the "System" partition  It is good practice and can be less confusion with a multiboot computer to create another "System" partition, then install each operating system on a different partition.  This way if you have a problem with one of the os, you can reformat without making the computer unbootable.  It also simplifies backups. This separate partition may be only 200-500 mb in size.  You probably wouldn't do that now, except if you're feeling adventurous.
  See you soon

• Comments XP not recognize new allocation of memory and hard disk size

  I'm under Fusion 3 on a new IMac 21.5 "running 10.6.1 with 8G of RAM with XP SP3 guest.  Just migrated since late 2006 MacBook 2.06 merger to help Mac running migration wizard, then upgraded to Fusion 3.

  Main problem is that when I updated to the size of the hard drive of 40G per 100 G and changed the memory allocation of 2G to 6G, Windows operating system does not change.  Windows reports 3G memory and 40G hard drive.

  Other questions:

  OS (or VMware) is also unstable and crashes, sensitive sentence without indicating CPU heavy and sometimes does not restart, requiring force to leave.  Usually, will run 30-45 minutes before crash. One application I run is Revit 2010 (which is also unstable, has just installed service release 2).

  Tried to install new comments, but get the message "No boot device" - seen a thread for this and create the ISO image.

  David: I can't help you with the RAM, but I had the same problem when I expanded my virtual HD 20 GB to 30 GB.  Windows XP always thought 20GB and called the rest "unallocated space".

  There is a beauty of a freeware program called Easeus Partition Master - http://download.cnet.com/Easeus-Partition-Master-Home-Edition/3000-2248_4-10863346.html?tag=mncol%3bpop&cdlPid=10982635.  Run on the Windows side (at least it worked for XP) and it should show 2 discs.  Highlight the one you want to extend, click on (expand / resize), drag the divider to full size of HD and then 'apply' and he has done the partition in about 5 seconds for me.  Problem solved.

  John