Monitor U2414H

Similar Questions

• Reference DELL monitor U2414H monitor will not work with DELL Optiplex 755

  I can't get my new U2414H monitor to work with my PC Optiplex 755 Ultra small form factor. The PC has a DVI offline andf the monitor has a display port, mini display port & 2 hdmi ports. I tried a display port converter for mini display port, a Display port converter / STANDARD display port. but the screen didn't poster no matter what exit. The PC works with other monitors. Can someone help?

  OptiPlex Ultra small form factor:

  http://www.Google.IE/URL?SA=t & rct = j & q = & esrc = s & frm = 1 & source = web & cd = 1 & ved = 0CCEQFjAA & url = http %3% 2F % www.dell.com%2Fdownloads%2Fglobal%2Fproducts%2Foptix%2Fen%2Fopti_755_techspecs.pdf 2F & ei = efk8VKOoJabj7QairID4Ag & usg = AFQjCNHdgV7iSDzhisyqC3_tHf-7JYicFg & bvm = bv.77161500, d.ZGU

  You should use DVI to HDMI which will make the video, but will not have audio.  There is no possibility for a ULTRA-COMPACT HDMI because it has no slots. There is NO display ports any on a 755 ultra-compact.

  http://www.microcenter.com/product/305974/DVI_to_HDMI_Adapter_for_Radeon_HD_4000-3000_Video_Cards

  

• XPS8910 with Dell UltraSharp 24 monitor - configuration double monitor U2414H

  I just got my XPS8910 and can not know how to set up two monitors, the only cable I need to connect the computer to a monitor's HDMI with adapter supplied with the computer. When I use the cable supplied with the monitor daisy chain monitors I get the message that there is no signal coming to the second monitor. I have allowed DisplayPort1.2. It's frustrating? I need additional cables, or is it a specific port option? Any help is appreciated.

  RL

  Hi rozmerlin,

  Please repost this in the forum Office help.

  http://en.community.Dell.com/support-forums/desktop/

• U2414H DisplayPort 1.2 STD Set Up - monitors will not get video Signal from the graphics card during start or restart

  * What specific Dell monitor? 2 two U2414h monitors with MD214 - package of multi-monitor support
  * What specific model of computer, desktop/laptop? Workstation HP xw8400, Intel Quad Core Xeon CPU E 5335 @ 2.00 GHz, 4.00 GB of memory
  * What operating system? Windows 7 Professional 32-bit
  * Which video card? AMD over-pants V3900
  * Which ports are available for the video card? DisplayPort 1.2 STD, Dual-link DVI
  * Which video output from the video card port video on the port monitor do you use? Output Mini DisplayPort Display port in
  * What cable are you using to set the video card to the monitor? Adapter DisplayPort to MiniDispayPort - we came with every Dell monitor
  * You use the Dell supplied cable? Yes - two monitors

  * Press the Menu button of the monitor to open the OSD (On Screen Display). The bottom of the screen should display a resolution. This resolution should match the resolution of the default monitor. The two monitors: 1920 x 1080, 60 Hz

  * Brief description of the problem monitor? Monitors have been implemented following the instructions on page 25 of the Dell online manual to connect the monitor to function DP multi-flow (MST). DisplayPort cable is connected to V3900 output MiniDisplay port DisplayPort graphics card in the 1st U2414H; second DisplayPort cable is connected to the DisplayPort on 1 U2414H monitor output and MiniDisplayPort in the 2nd monitor U2414H. Dell U2414H drivers have been installed from the CD provided and both recognized by Windows. V3900 graphics card Driver is up to date with the EyeInfinity software. Source of input on both monitors the Mini Display Port value. Display settings on both monitors Display Port 1.2 value activate. Resolution of the screen on Windows 7 shows: (a) two separate Dell U2414H (mini Display Port) screens, with each resolution 1920 x 1080, multi (b) displays the value "to extend these displays. The two views work with Setup leading up to and acknowledged by the graphics card.

  Problem 1 - all the time - monitor power buttons are lit, the computer is turned on, then monitors lights don't - they show 'Power save mode' and then turns off. To hit the power button on the computer to shut down Windows. Only way to get these on monitors is unplug cords from the back of each monitor, wait a few minutes, plug in the power cord, start computer and then both monitors will start up and sign of windows to the screen will appear and monitors will work. Normal operations for a full day of work if you do not restart. If you need to restart during the day (like when you get a software update), the same thing happens. Start the computer to restart, but the monitors come back on not and remain dark. There is nothing wrong with the graphics card V3900. He is certified by AMD and DisplayPort.org to work in an environment of STD DisplayPort 1.2. I had previously two 215tws Samsung SyncMasters connected to each output V3900 Grahics card and they work very well in extended mode for years until a SyncMaster 215tw started shaking like crazy. A SyncMaster has been connected to the out display with a dongle and a DVI cable Port. The other SyncMaster was connected to the DVI output on the graphics card. So I decided to buy these two U2414Hs. Technical support Dell after many phone calls and e-mails finally advised me that there is a problem of "compatibility" between my computer and the U2414Hs and recommended that I return the monitors. On the web site of the U2414H AMD has not been certified by AMD to work in a DisplayPort 1.2 STD Set Up. Other former Dell monitors are certified by AMD to work in the Display Port 1.2 Setup. DisplayPort.org lists the U2414H to work with Display Port (it does not say that it will work in a DisplayPort 1.2 Set Up).

  Problem 2 - shift perceptible in the entrance of Microsoft Blue Tooth keyboard and mouse and PS2 Keyboard and mouse. All the drivers are up to date. When you type a phrase, it takes a few moments for the text displayed on the screen using a keyboard. Both the mouse connected and the Bluetooth mouse are unresponsive sporadically for a few moments until they finally react. It happens regularly during the day. The monitors provide excellent clarity when you work. The stand is ideal for office property. Before these monitors are returned if no one knows what causes these two problems and does anyone have a solution? Should I stop using the Display Port 1.2 and hang them using HDMI with active dongles? If I have to return these two U2414Hs, I considered the 2 two U2413s. Someone at - it all opinions on the last U2413s from Dell? I have read some real problems with ghosting that I just haven't the time for more. The remanence correction in the models of U2413 sold in 2014? There are very few monitors on the market with Display Port in and out to the back to support DisplayPort 1.2 STD Transport.

  Thanks for any input.

  I had to remove my VGA HDMI DV card and now the DP (display port) works very well. Don't need to use a HDMI cable. Display Port 1.1 is reported as the problem in order to remove the card solves this problem.

• U2414H, black bars

  I bought a monitor (U2414H) December 6, 2015. Monitors black band on all sides (half inch on each side and quarter inch up and down).  I have a XPS 8500 computer.

  I spent about an hour with technical support problems.

  They have warned me repeatedly, tried to transfer my calls with the promise that they would call me back if the line cut.

  The line has been cut several times. Waited and then not call back I would call back each time and had to start the process all over again explaining my problems.

  So far, I spent an hour and a half taking and waiting, but without any solution.

  I tried to call customer service to see if I can return the product. Here again, I kept on hanging, then after 20 minutes someone told me that I called the business support, even if the number displayed on the Dell Web site showing the House and the customer. So, I put on hold with the promise that if the line has been disconnected, someone calls. But after 30 minutes of waiting, I gave up.

  I also tried online. Online chat asked the service number, which does not monitor, although I bought it directly from Dell website using the Dell credit card.

  The monitor has the serial number and another number to 6 numbers on the back.

  It's frustrating. Can anyone help?

  This is most likely a video card display setting. Read this. Here is the Guide of the user, your monitor. Go to page 35, which deals with the OSD (On Screen Display). Open the display settings. Left and right resolution must be 1920 x 1080 60 Hz. The proportions must be 16:9 Wide.

• U2414H, DP cannot see Bios screen

  I read a lot of posts on the U2414H and the problems with DP. I have a unique question to add. I have two monitors U2414H, NOT chained. The two are connected with full DP DP full of my quadro FX1800 to the monitors themselves. When I turn on my PC, monitors remain in power saving mode until appears the windows login screen. After this point, they work no problem whatsoever. Could be worse, but I can't access the bios at all with these monitors. If I hit the key to the bios, the PC will get into the bios, but my screen is simply stay in energy saving, so I'm stuck until I reboot manually. Has anyone else had this issue or know how to fix? CHANGE > Yes, I did the factory reset in the settings of the monitor. I also tried the solution proposed for monitors of the Garland with registry changes, even if my monitors are not chained. No effect.

  To display the bios, you will need to connect to the FX1800 via its DVI port.

  Computer video card DVI out-->--> U2414H HDMI DVI to HDMI Cable to

• CD provided with monitor

  This may seem like a silly question but...

  Recently, I posted a question on a faulty monitor and eventually I managed to organise a replacement - time in the coming days.

  I've been watching the guide of user installation for monitor U2414h, which comes with a CD with drivers etc.

  Try as I might I can't see anywhere in the game guide which told when or what you use this disk for.

  Can someone enlighten me as to why it is necessary and when to use it?

  I find the instructions usually poor.

  It would take only the CD if you can't access the internet. Everything that you need is on the U2414H web page. Manuals, drivers, etc. The U2414H is a plug-and-play monitor. You have not even need to install a driver to ensure that it operates at 1920 x 1080.

• U2414H - question Daisy chaining

  Trying to get U2414H monitor purchased from Dell daisy chain with MS Surface Pro 3 (8.1) (all updates made). Driver for the monitor is also downloaded and installed.

  Have Surface Pro 3 dock miniDP to DP (en) U2414H then (out) DP / DVI on 3rd screen.

  I activated PD 1.2 on the Dell and I can extend screens of the Surface of the U2414H very well.

  I clicked on "detection" to see if it detects the screen which is attached via DP to DVI cable and it gives ONLY the option to connect via VGA.

  I could go buy a DP to VGA cable and hope that it would work with that, but why the options do not have a choice of DVI? If possible, please let me know what to do to get this choice.

  Thank you

  Katrina

  Update: ordered another monitor U2414H, but none of the cables provided with this worked. I had to order a cable of DP to DP to connect two monitors. DPout used in the RPI and it works fine now.

• Black screen U2414H DisplayPort more low setting applied

  I have a dell precision computer M4800 laptop with docking station and two monitors U2414H.

  * Windows7

  * AMD over-pants M5100 FireGL V

  * I use the supplied cables supplied with the monitor miniDisplayPort

  * The docking station has two output ports DP (video 1 and video 2)

  * I've only tried the miniDisplayPort on the monitor inputs

  * The monitor was purchased through Dell

  A monitor works perfectly well, and works with a cable and either output DP (so I guess that the docking station and the cables are fine).

  However, the other monitor shows a black screen (if his hip as a single monitor or if I try to add the two together).

  Windows displays this warning when it is connected:

  Display applied lower setting port

  "The system has detected a problem with the connection between your computer and the DisplayPort monitor that prevents you to use higher resolutions and/or refresh rate."

  The monitor shows a black screen and is configured with a miniDisplayPort as input Source.

  If I try to bring up the OSD message is displayed:

  "There is no signal from your computer. Press any key on the keyboard or move the mouse to wake him up. If there is no display, place the monitor button now to select the correct input in the on-screen Display menu source. »

  I wasn't able to do a reset to the factory via the OSD settings, but I managed to turn on/off the setting of DisplayPort 1.2 (based on immobilized the Menu for 8 seconds). I tried with both enabled and disabled for the same result.

  Thanks for the answer by Chris,

  That moment everything works, I'm a little hesitant to restart in case something goes wrong again, but for now, everything is good.

  In the end, I did the following:

  * Update the BIOS

  * Set up the BIOS to disable switchable graphics (which means AMD card is used)

  * Updated AMD drivers

  * Uninstalled Dell Monitor driver

  * Plugged the monitors of the docking station, and then ran the driver monitor DELL software - it detected two monitors and installed the software.

  * The things still are not 100% with the questionable monitor - but I changed the parameters of DisplayPort 1.2 and its working now. (If I got to the "display settings" OSD display display Port 1.2 > disable).

  I put the laptop to sleep all night and he works up and all the monitors turned on (yay), but I am yet to perform a reboot since I have things to work.

  I'll close this issue even if things work out right now. Thanks for the suggestions (such as various tests I did based on your suggestions led me through the steps above to make it work).

• U2414H DP 1.2 STD questions

  Hello

  I have exactly the same problem with 3 monitors U2414H.

  P25 User Guide:

  "To allow the connection of STDS, Please use only DP cable such as estimated in the box (or) other DP1.2 certified by cable and change the RFP DP1.2 setting by following the steps below:

  There is no DP > cable DP in the box, only a CDM > DP.

  Cable to connect the DP STD monitor shows the first image can be found in the RFP (NO CDM) of the first monitor.  (Which is the opposite of the connecting cable DisplayPort (Mini-DP DP) black P24)

  The PC is an HP 6300 Pro running an AMD Radeon HD card 7450 DP - it will not detect the monitor as having STD available.

  Do I have to go buy another RFP > RFP cable?

  rod_bunny,
  Our cable should suffice.

  In a monitor three DP MST parameters, only the first and the second monitor in the chain would be DP active 1.2 in the OSD.

  Computer monitor 1
  computer card video DP or CDM on--> monitor 1 DP or CDM in via the Dell mDP to DP cable

  Monitor 1 monitor 2
  Monitor 1 DP 1.2 MST on--> Dell DP to the CDM cable--> Monitor 2 CDM in

  Monitor 2 monitor 3
  Monitor 2 DP 1.2 MST on--> Dell DP to the CDM cable--> Monitor 3 CDM in

  Of course, this assumes that the video card and driver are compatible DP 1.2.

• connect AC511 SoundBar hollow hub USB of Dell U2414H Monitor

  Hello

  I m ussing U2414H monitor (over HDMI) and currently got the SoundBuffer for she.
  I understend that connectign the Soundbar in the monitor does no point but it is possible to
  link to the monitor to the PC USB hub and then connect media devisess (bar sound, usb, headphone, usb, mouse etc.) directly on the screen?

  And in case where possible which cable / slot I use to bridge the gap.

  Thank you

  Yes possible to connect the hub on the screen but you then attach a standard USB cable to the Hub on the monitor at the back of the PC.  Its the same B cable that is used for printer A/USB cable etc.  You must make sure that windows is set to sound on USB Audio not the analog channel output.

  Learn how to configure and connect your monitors, set the parameters of resolution, find drivers and updates and other useful resources.

  To learn more

  http://FTP.Dell.com/manuals/all-products/esuprt_electronics/esuprt_Display/

  

  

  

• U2414H, Dual, laptop, Windows 10, Nvidia GTX 960 M, no STDS to the second monitor?

  Hi all

  I hope that I have included all relevant information in the present, but ask if I missed something. I bought two of the screens U2414H and a Windows 10 laptop computer powered by GTX 960 M with HDMI and Mini DP ports. My goal was to be able to the Garland of the whole U2414H screens so I could use my laptop out and about, and when connection back to the monitors of would have to plug in a cable and get two screens. In theory, but...

  I followed the instructions and using two Mini-DP to DP cables, connected the mini laptop RFP RFP on the first screen. DP on this same screen highlights Mini DP on the second monitor. I activated the DisplayPort 1.2 on both of these screens. I can't get any signal on the second monitor, it boils down to the power saving mode.

  Otherwise, I decided I would try using two cables and ditch the idea of DP STD I can at least use the two screens. So I have laptop HDMI to a screen and the MiniDP to another, and therefore, that alone will never work at a time. Individually, they work very well, both with HDMI or DP. But the two connection fails every time. When I tried to connect a display of alternative supporting HDMI as the second, which works very well.

  So I had an autour reading and it seems that it is common to have problems of connectivity to these screens. This brings me well on my two questions:

  (1) is there something that would work?

  (2) assuming that there is nothing that works, Dell can swap these screens for two that will achieve what I need?

  Thank you

  Dave

  In MST, DP 1.2 should be turned off (disabled) on the second monitor.

  Laptop AMD on--> U2414H CDM to cable DP--> DP U2414H #1 in (DP 1.2 enabled) (Port #3 in the image)

  
  #1 U2414H (Port #5 in photo) DP--> DP U2414H CDM cable--> 2 # U2414H CDM in (DP 1.2 disabled) (Port #4 in photo)

  When you use only no STDS, is the lid of the laptop open all trying to run two monitors of U2414H? This laptop can even run three screens, laptop LCD + 1 # U2414H + 2 # U2414H?

• U2414H monitor has stopped working.

  Hello, I have a U2414H monitor, and while playing wow the computer kept jumping on the desk to do some updates. All of a sudden the screen went black and I noticed that the power had disappeared. I changed the power cable to one, I knew that worked, but the screen is dead.

  I brought to the United Kingdom on April 16, 2015, but have since moved to the Poland. Recorded in the United Kingdom, I have changed the record in Poland yesterday.  The warranty is still valid?

  Very strange. Get it exchanged.

• How to connect two Dell UltraSharp U2414H 24 inch screen LED monitors daisy chain?

  I just bought two Dell UltraSharp U2414H 24 inch screen LED monitors, but it is unclear how two monitors must be linked together. Cable does not seem to be provided? Can anyone help?

  You have the L412Z XPS 14Z. It has the following video ports back =.
  CDM (Mini DisplayPort)
  HDMI

  XPS 14Z L412Z CDM on--> Dell mDP to DP cable--> #1 U2414H DP in
  XPS 14Z L412Z out HDMI--> HDMI to HDMI Cable--> HDMI U2414H #2 in

• U2414H, Dell Store of affiliation of the India, received faulty monitor, bad service

  I bought a Dell Ultrasharp U2414H monitor online at CompuIndia.com (membership Store Dell India) I got this article on June 22, 2015

  Since the day I got it, I faced too many problems with it. The goal of buying the new monitor was to connect to my Acer laptop (Aspire E1 - 572), which has VGA & HDMI ports to connect to the external monitor. As the monitor got only screen & HDMI input ports, and they did not provide the HDMI cables with the monitor, I had to buy an HDMI cable to operate the first day. I used it as a multi monitor and the strange problem appeared to start. The monitor went blank and entered into normal state in 2-3 seconds to little frequent delays several times (5 to 10 times) in an hour. I checked all the connection cable and detached from any other connection other than the supply cable and HDMI cable and it was again the same scenario. I have re-installed OS in my system and updated all the drivers only to see that the problem was still there. I thought it would be due to a fault in the HDMI cable I bought at a local store. So, I kept the monitor next door and ordered online a new HDMI cable I received 25 June 2015. I replaced my old HDMI cable with the newly purchased. The monitor was still showing the same problem but rarely happened until this afternoon when I noticed the monitor started to flicker and display went blank back and come very quickly. I turned off my laptop and remove all cables other than cable power monitor and re-tested and could see that the same thing is happening again. I plugged in the screen on the plugs different to confirm if it was something to do with the problem of power supply but not this case. I recorded the photos and video of this strange behavior, using my mobile device and the zip file containing the same was sent to customer service CompuIndia explaining the problems the same day. As I don't have a response from them I contacted them today (June 26). The representative of CompuIndia told me to contact Dell support. Contact Dell technical support was really painful but they do too many phone numbers listed on their Web site. I was suspended several times and has been disconnected. After trying for 2-3 hours in the morning, finally I could explain my problem to a person name Sunil. After checking online on all the problems and try all possible solutions, my monitor was always showing the same complaint. So he told me that they have a Tech person visit my place and replace my monitor with a refurbished. I wasn't ready to accept the monitor renovated as a replacement because it showed the problem since day 1, I received and it was given barely 4 days and so I have the right to replace it with a new one. So he advised me to contact CompuIndia to obtain a replacement with a new monitor. II contacted a person in CompuIndia and explained everything who assured me that he would contact me soon. That I did not get any call or email on their part I contacted them several times but they told each time to get back to me, but I never contacted by them. I contacted them in the evening again, and said they will respond to my email in 2 minutes. Now the person (did not provide his name) to the CompuIndia said that they received no response and the technical team that once he could send me an email. Now, this can't be the case. I am really frustrated re: DELL service provides. I feel that I should not have bought Dell monitor. I lost a lot of my time and money. Please indicate where I have to contact to get replacement.

  In the USA, we cannot replace this monitor. You must re - contact Dell India supported command. Read this for instructions.