MP460 CANON DOES NOT SCAN

Similar Questions

• HP 6500 Wireless does not scan

  The printer works fine for printing, but it does not scan.

  When I select scan on the officejet 6500 wireless it is said: 'SCAN MENU SELECT a COMPUTER' any key on the keyboard work only 'OK '. When I select OK it says "No. Scan Option - refer to device documentation to troubleshoot. Press OK. »

  Operating system: Windows 7

  Connection to a printer wireless

  Download/driver downloaded and installed oj6500ve709_basic_14

  Mahalo (thank you in Hawaiian) in advance for your help.

  Hi soccer_crimson,

  Follow the attached document for your Officejet 6500 printer model.

  Steps to follow for issues with WIA - Windows Image Acquisition:

  Follow the steps below to check the WIA Service:
  1. type services.msc in run or search and files program
  2. scroll the page up to the WIA Windows Image Acquisition
  3. make sure that the service is running. Click on stop and then restart to ensure
  4 restart the computer
  
  Restart the services of dependencies:
  1. Click Start, in the search box type "services" without the quotes.
  2. scroll down until you see Windows Image Acquisition (WIA).
  3. double click on it and go to the Dependencies tab.
  4-2 services must be listed.
  5. close this window and look for the remote procedure call (RPC).
  6. make sure it's on manual or if it is enabled automatically, just leave it. Make sure the service is started.
  7. go to hardware detection kernel and Double click.
  8. set the Startup Type to manual and click on apply.
  9. you should be able to start the service by pressing Start.
  10 now, you are done and the Twain Manager must work and gives you is not a mistake. This should solve your problem

• My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

  My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

  Hello

  Is the printer connected to your PC by USB or network?

  Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

  Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

  Kind regards

  Shlomi

• does not scan the whole page, only the column

  My All-in-one HP Officejet Pro L7580 scanner does not scan the entire page.

  Regardless of where to send... Word, Mail, photos... all I get is about 3 inches of column of the entire page.

  What can I do to remedy this?

  IF the copy works perfectly. Try to open the HP Solution Center and find the settings > scan settings > scan document or scan picture settings.

  Search for advance settings or more and are looking for an option on the digitization of multiple files or just the entire page or something to that effect. The software may have missed in the analysis just a part of it. You can check the settings where you can have a preview of the scanned document and find the broken line around the scanned image, you need to move, it will scan what's inside the broken line.

• HP Officejet 6500 a E710n-z: HP 6500 printer scanner prints but does not scan

  Since my OS has been upgraded to Windows 8.1 the printer scanner prints (very slowly) but does not scan!

  I tried HP Print and Scan doctor, he worked once (clumsily) but not since. I tried Windows ' whatener it is called "but nothing.  It was working perfectly since I the printer scanner.   Now I don't NOTHING DO let's me scan.  and the fix message tells me that my WPA security password is not quite valid (nothing has changed here!)

  I checked the internet, it seems that a lot of people have the same problem.  I don't know if anyone has fixed it.  The so-called solutions are not very easy to follow!  Just as they do not work.

  Thank you X-23, I'll ty that when I have a little more time.

  Dziadz

• Printer Samsung CLX3175FW does not scan

  printer Samsung CLX3175FW is printing, but does not scan

  Windows XP home SP3

  Thank you

  ettore1

  Hello
   
  
  1. what happens when you try to scan?
  2. did you scanner worked successfully before?
  3. have you installed all necessary drivers?
   
  Make sure that you have installed all the drivers from the link below. Also check with Samsung support, if there are any faulty hardware component in the device.
  http://www.Samsung.com/us/support/owners/product/CLX-3175FW/XAA
  See also:
  Use your computer to print, scan, fax
  http://www.Microsoft.com/windowsxp/using/Setup/hwandprograms/printfaxscan.mspx
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Wireless J6480 prints fine, but does not scan

  All J6480 printer a HP. It was connected to a desktop HP running Windows XP with a USB cable and printed and scanned OK. Computer for office is dead and has been replaced by a Samsung Windows 7 laptop so the XP installation CD does not work. A printer connected to the laptop and it prints fine wireless but does not scan.

  1 downloaded the HP website OJJ6400_Full_13 and I tried to add an another J6480 but he says that there is already one installed in a wireless port. I didn't go ahead because the printer does not print not good. Should I continue with the installation?

  2 Ran HPSDU.exe diagnostic tool and it said ojj6400 USB HP Officejet J6400 is the only installed printer.

  3 HP Digital Imaging Moniter displays the HP Officejet Series_TMP000 disconnectedstatus.

  4 start-all programs-HP shows only HP Smart Web Printing and Officejet J6400 Series. There is no HP solutions Center.

  Thanks for any help

  I uninstalled the J4680 printer and all HP programs associate. Start - all programs showed no HP at all. I installed the full version of HP J4680 programs and everything works fine. The wireless connection was automatically created during the installation and the scan works very well.

  Thank you for ME

• Acrobat XI does not scan in color on Win 8.1!

  I use a Kyocera 6526 cdn as a network scanner and latest acrobat XI as digital delivery of Dell on Dell new 8.1 Win machine.

  My other computer, a Win 7 machine does not scan properly. It uses a standard version Arcobat XI installed from a cd/dvd.

  Any mode that I use, it will not scan in color on the machine win 8.1 and graphics such as my logo are pixeld? Help, please

  Hello

  Please try to use "Color Image" preset mode to scan your document based logo. You can also perform custom analysis and set "Color Mode" to the "color" for the scanning of your document.

  Acrobat help. Analyze the documents in PDF format

• software quick menu Canon does not recognize scanner for MG5450

  I have picture of ink jet Canon Wireless all-in-One printer (MG5450).  I installed a Canon full software on my new laptop Acer Aspire R5 - 471T.  The quick menu does not recognize my scanner.  In the printer preferences is listed, but to scan, nothing is available.  Could you please suggest how to get scanner as well as for my device?

  I installed the latest drivers from MP which cured the problem.

• MX410 does not scan wireless using Mac

  Hello

  Recently, I was forced to create a new user on my Mac (OSX Yosemite), and since then the scanner on my MX410 does not work wireless. I get the message:

  Cannot scan for these reasons:

  -Scanning is off.

  USB - cable is disconnected.

  Please check and try again.

  Scanner driver will be closed.

  2.156.0

  If I change users for older users, it works very well. If I go into System Pref/Printers & Scanners/Scan/Open Scanner it scans very well wireless.

  Any suggestions or recommendations?

  Thank you

  Using Navigator MP EX or ImageCapture? If you use MP Navigator, make sure you check the settings on the new users to make sure that it is looking for the network version of the scanner.

  http://kbsupport.Cusa.Canon.com/system/selfservice.controller?configuration=1011&PARTITION_ID=1&SECU...

• HP Envy 5540: HP Envy 5540 does not scan

  Hello

  I just bought an all-in - One HP Envy 5540 and installed on my PC running Windows 7 Home Edition (64-bit).  I did the whole upward online and printer and copier work without problem.  But the printer won't scan to my PC.  (I use a USB, is told by the way).

  When I press the icon 'Search' on the printer, I get an error message that says: "no computer found."  He then gives instructions to "open the HP printer software, select Actions 'Scan' and then select 'Manage the computer analysis'."  The only "software" I can find is the downloaded "printer Assistant", who does not have a tab "Scanner Actions."

  I tried to download the "Scan" doctor and still running the 'fix', but it did not work after following all the instructions, including unplugging them, restart the PC, etc.

  Any ideas I can try please?

  Thank you.

  PS update: after a stop during the night, today - when I press 'Analysis' - the printer is set up a list with my computer upstairs (another entry said "no computer not listed").  When I press the icon for my computer, I get a brief 'access... '. "message as he tries to connect.  I get then a message saying "connection required.  The selected computer is not available.  Ensure that:-l' computer is turned on; -l' computer and the printer are connected properly with a cable USB; -the recommended HP Print software is installed and configured on the computer. »

  The only one I am uncertain is the last of them - but I guess he has everything installed and configured, because everything else seems to work.

  Still stuck!

  Hello
  
  Thank you for using the HP Forums.

  Please uninstall and reinstall the software COMPLETE features, follow these steps:
  
  1 uninstall the software from your computer
  2. download and save the software COMPLETE features (do not install online)

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-5540-all-in-one-printer-series/5447939/model/5447940#Z7_3054ICK0K8UDA0AQC11TA930C7

  3. install the FULL feature software "saved".
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  How to scan to computer
  
  Once you have installed the software:
  
  1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
  2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
  3 make sure you have "Enable" Scan of the computer. Also, make sure that the tab "automatically start Scan of the computer when I connect Windows" is checked if you want to perpetuate this feature. (the following video will show you how)
  
  Scan to computer
  
  Hope that helps!

• HP officejet pro 8600 does not scan

  I have been using offijet pro all-in-one for 1 year and a half and recently I started having problems when scanner before that this was not a problem.
  
  2 months ago, the printer has not left me more scan to the computer using its features touch screen, for example, I used to which copy of computer on the screen of the printer and it used to work. All of a sudden I started to get the message across "to scan to a computer make sure that the feature is enabled." Open the HP software... »
  
  Then, I found a solution to this by clicking on the scan of my laptop, for example, I found the hp icon scan and the window would come and I could scan.
  
  Two days ago I went to try to scan and when I click on the HP SCAN icon on my laptop it simply does not come to the top! as if I'm not clicking on it. I also tried to scan by clicking on the icon of the hp software where he gives you access to change the settings, get ink levels etc... but the same things happens, it opens!
  
  Within these 2 days for a reason any after click on scan HP several times and restarted the laptop, but sometimes it worked most of the time it didn't. For example today I failed to get to only Scan not even once.
  
  My laptop is hp compaq 6730 s.
  
  NOTE: TO PRINT FROM MY LAPTOP TO THE PRINTER WIRELESSLEY. THE PROBLEM IS WITH THE SCANNING

  Thank you for your help, much appreciated. Somehow after a month it suddenly starts working again. However looking back, this week I just uninstalled the HP UPDATE and installed a new. I think it was the thing that solved the problem.

• HP Deskjet 3050 a does not scan.

  Original title: Scanner

  I have a HP Deskjet 3050 impression scanning & copying but I am unable to get the scanner to scan

  Moved from IE

  Hi Anne,.

  It seems that your scanner does not work.

  I would be grateful if you could answer the following questions:

  1. did you of recent changes made to your computer?

  2. what happens when you scan? You receive error messages?
  3. what operating system do you use?

  While your answer above information, you can try to reinstall the drivers for the printer from the following link.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=4066452

  Answer us with the above information for you help.

• HP OfficeJet Pro 8600 icon opens the screen on the desktop but does not scan option

  HP Officejet Pro - N911a e-all-in-one printer
  Serial number:
  {Removed privacy}
  Product number: CM749A

  When I opened icon HP OfficeJet Pro 8600 I see no lopnger options to select scan or fax from the computer monitor screen and HP printer assistance does not open.  How can I fix it?

  My solution was to delete and reload the software.  I downloaded the software from the HP support site and installed on my hard drive.  It worked.

• Why Canon does not have old adapters for my SLR camera lenses? I can get them with Sony, but not for Canon

  I have an old Canon Ftb with a goal of 1.4 fd. I'm getting into digital cameras now (just to have a 12 G for now, mainly used for underwater photography). I would like to stay with Canon, but I'm very annoyed that Canon doesn't have a way to continue to use their old lenses. Nikon, for all their flaws are much better at you can continue to use your old stuff.

  Then I find that if I'm going to Sony (Yes, really, Sony) can I use my lenses from Canon ol via an adapter. This my Canon, tell me it ain't so. You must have a way, I just have not yet discovered.

  There are many challenges with this and the "adapters" are to be considered with a certain scepticism.

  The FD lenses are mechanical - no electronics.  The case of the unit, on the other hand, has an electronic interface for the lens - nothing of mechanics.   This means that if you set the goal, you would have to manually set the aperture but also of manual focus of the lens.

  Your Canon DSLR had a split Prism focusing in the viewfinder to help.  A new camera does not work.  The reason why there is no help from the development is because most of the lenses are autofocus so it is simply not necessary.  This makes it particularly difficult to tell when you've worn exactly the goal.  Making it even more difficult is that any device with a sensor size of APS - C (most of them) have a small viewfinder that you had on your Canon SLR photography.

  In addition, the lenses are optimized for a specific back focus distance.  Canon's EOS cameras have a depth of 44 m from the mounting flange of lens at the front of the body at the level of development within the body.  When you use an adapter, it modifies that distance.  If you change too much, the lens behaves as if it is mounted with extension tubes, the entire range of focus is moved closer to the camera, and it can be is no longer able to focus to infinity.

  There are 3 parties that make these lenses... conversion kits but they do them for a few drinks (not all) and that they require a bit of surgery on the goal (e.g. this level which protrudes beyond the rear of the lens used to set the aperture value should go).

  But... the modern lenses are just so much better than the old FD lenses.   Requires really quite the dozen FD lens to make it interesting this fuss.  Also, I own a Canon SLR (AE-1) and a few glasses of FD... but have no interest in trying to use one of these lenses on my EOS DSLR cameras.

  I think that this question almost as Ford asking why they do not wheel adapters let wheels it T model mount on a Mustang of 2015.  The new wheels are so much better than the old wheels, you want to continue to use the old wheels.

  Leave your old lenses in the past.  Mine are on the shelf alongside my AE-1... body as a conversation piece.  I don't actually use them.