Mr President, unforjnity my pc hardware hp laptop g62 - 208 ca

Similar Questions

• Computer laptop 15-ay011nr: manual hardware for laptop HP 15-ay011nr

  Is there a manual hardware for laptop HP 15-ay011nr?  If this is not the case, how the hard drive is replaced?

  This laptop is quite a departure from my experience with servers and previous HP laptops.  I was able to easily find the manual equipment for each different computer server or HP laptop I worked on, not the same with 15-ay011nr.  On any other HP laptop, I was able to find the rear covers to replace the memory and hard drive, not the same for this laptop.  There is no lid at the back of this laptop.

  Please find the link seen below manual for your laptop.

  http://support.HP.com/us-en/product/HP-15-notebook-PC-series/10862300/model/11084067/manuals

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP

• Peut my laptop G62 - 435DX BIOS virtualization Support

  My laptop G62-435DX BIOS Support with hardware virtualization assisted by the fact.

  My AMD CPU supports virtualization features.

• Computer laptop G62 keeps freezing

  For the last two days, my laptop G62 - 227 CL keeps freezing once I used it for about 5-10 minutes.  It freezes completely - no cursor movement or response to all keys.  In addition, it freezes any programs I am running.

  However, I am able to use the computer in Mode safe mode with network without any point of freezing (so far; I was in Mode without fail for about 30 minutes).  Unfortunately, I need to use MS Word, which does not work in Mode without failure.

  I use the computer entirely on the current because the battery is pretty much kaput.  Could be the problem?  If so, I'm confused as to how the computer can operate in Mode without failure.  I can't afford a new battery, so I hope that there is just some sort of software problem.

  Is there some kind of diagnosis I can run who can tell me what is the problem, or if anyone else has had this problem?

  Thanks in advance for any help.

  Hello

  You are welcome

  From your description of the issue and the HARD drive error code, it seems that the player is running out - is one of the reasons for which a failing drive will run in Mode safe because it experiences less load (in terms of read/write) when Windows is running in this mode.

  The first thing I recommend is to back up all your personal files etc so that you always have access - lack of readers can be unpredictable.

  Once completed, see if the following is helpful at all.

  Start in Safe Mode, click the Start Menu, click computer, left click Local disk C once to highlight, right-click on Local C drive and select Properties.  Click the Tools tab and then click on the button "check the drive for errors.  In the next window make sure that both boxes are checked, then click Start.  Right plan the audit on the next reboot of the system, and then restart the laptop - this process can take several hours before the load in Windows.

  If there is no improvement real time this is over, it is probably time to think about replacing the HARD drive - if you want a guide on this procedure, please let me know.

  Kind regards

  DP - K

• Replace wireless card for laptop G62?

  Hi all

  I have a laptop G62-18sa HP with standard RT3090 wifi + bluetooth combo card in and I was wondering if I can replace it at all? I was looking at this map http://is.gd/nNjsK8

  I ask because the RT3090 card has very, VERY poor support for Linux and I'm looking to replace it. If the map above does not can anyone suggest those likely to adapt and to work under Linux?

  Thank you very much.

  It's ok now, the wireless is fairly well supported in Ubuntu 11.10 "Dreamlike Ocelot" and I think that Linux 3.0 has fixed some (not all, bluetooth seems a bit wonky) issues :-) Cheers for your help anyway.

• Computer laptop G62 won't boot disk boot

  Need to recover the computer.  I ordered a HP boot disk.  The drive arrived and my laptop G62 reserve not boot disk.  I checked the bios and it is configured to boot from the CD.  I also started in safe mode and cannot locate an autorun exe when I start Solution Explorer.

  Basically, my computer has been hijacked by a nasty virus that has completely taken over my PC.  If I start I see is an empty office and a start menu, can't even get a run prompt.  The virus disguised as anti-virus software and trying to make me pay for their software suite $ 90 to "fix" the problem.

  If I hit F11 at startup upward, recovery stops and I get a blank screen forever.

  Any suggestions?

  Hi, Courtney:

  Try it free Kaspersky rescue CD.

  This disc will get rid of viruses like those and the good thing is that you don't need to be on Windows to run it.

  It is a bootable CD (what you do from the file transfer) and by using the GUI (GUI), you can scan your PC for viruses and remove them.

  Link and instructions below:

  http://support.Kaspersky.com/viruses/RescueDisk

  Rather than modify the boot order, just start the notebook and at the beginning of the HP welcome screen, press the F9 key to launch the start time menu.  Select the DVD-Rom drive, and then press the Enter key.

  You should then see a message on your screen that says basically: 'try to boot from DVD... ". Press any key to boot from the DVD... »

  Press a button and the DVD or the CD should start up.

  Paul

• Then I remove the camera on my Pavilion tx 1410 and install it on my laptop G62?

  Can I remove the camera on my Pavilion tx1410 notebook and install it on my laptop G62?

  This isn't if you can, but if you have the electronic skills to do it, I don't think it's a good idea to try.

  .

• Time does not automatically refresh in computer hp laptop g62-457dx

  I have a hp laptop g62-457dx. recently, I have faced this problem. his time does not update. When I connect online and time updated, then it works. but when I turn off my computer, laptop and portable lights after one or two hours later's time does not update.

  How can I solve this problem?

  Original title: time problem

  CA

  It's mostl probably the CMOS battery.  This battery keeps track of the time when the computer is turned off.  It is not too difficult to replace and is less than $20

• Computer laptop G62 couldn't update drivers AMD

  As it is said, my laptop G62 went update the Bios and drivers and it says update failed. I tried to update again, but he says no update available. History shows a failure. Any advice? Thanks in advance!

  A link to the pilot available & software download here.

• HP 2000. : drivers required internal hardware for laptop HP 2000.

  Maybe someone can help me get a pawn shop 'negotiate' return to a life of service exclusive of Linux.  The previous owner had appearantly attempted to retrograde Notepad of Windows 8 for Windows 7 using a Win7 recovery disc and a picture of another computer. Then of course the whole system, the recovery partition and everything, have been formatted away and replaced by an unauthorized and broken windows installation.  I'm OK on Ubuntu we so for now, but I may want to install a new copy of Windows and cannot find that site support of hardware drivers Web internal on my laptop HP 2000 (number of product C2M42UA) anywhere on the HP.  Before wiping away the unauthorized installation of Win7 I looked at the Device Manager and do not forget to Realtek HD audio and video Intel HD and have found the drivers elsewhere on the web, but cannot be sure that what I'm going to need.  I don't think remind me that with the bad install ethernet adapter was without a driver, for example.

  Where to find a list of drivers for that to scavange the web?  Seems to me that if a hard disk failure will leave any HP computer newest in the worst form, since they replaced the recovery disks with a recovery partition on the hard drive, it is intended to restore.  Something I keep in mind in computer future shopping.

  Windows 7 driver download page for your model:

  http://support.HP.com/us-en/drivers/selfservice/HP-2000-2b00-notebook-PC-series/5296210/model/5305080#Z7_3054ICK0KGTE30AQO5O3KA30R1

  Remember, when you buy a new laptop they don't give you recovery discs. This has been true for many years. However, there is a recovery manager that will allow you to make these discs, and if you do this and store it in a safe place, you are still able to recover your system. Windows itself now has backup tools very good including the ability to make an image of complete computer system in its current state (not the factory condition) so there is no real reason that you cannot be completely protected against a hard disk crash.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• screen of my hp laptop g62-a20sa lights all the time. is this hardware failure?

  If I turn on my laptop screen seems to work, but not all the time. It just does not turn every time in all. However I can hear the PC fan is spinning and the HDD runs as well...

  I reinstalled the operating system, also updated graphics card. Nothing helps.

  Retail store where I bought this PC does not replace this PC or hardware, because they "can't" identify the problem...

  Help!

  Perform a hard reset on the phone. To perform a hard reset, follow the steps below.

• Computer laptop G62 crashed and now it gives error "unable to open because of the recent hardware or software error"

  I have a new problem with my PC. My laptop suddenly crashed. It was working fine before this, but while I was watching a movie, it's just off. I tried to restart but it gave me the error that it cannot open because of software or a hardware error. It gives me two options: 1. to try the Startup Repair tool. 2. to open Windows normally.

  I tried to open it normally, but it redirects me to startup repair. The Startup Repair is unable to do anything.

  =================================================================================

  Startup Repair can try to restore your computer to an earlier point in time when it worked correctly.

  This repair will not personal data change, but it can remove some programs that have been installed recently. You can't undo this restoration.

  =================================================================================

  Then I tried to restore my PC to a previous restore point, but it won't let me continue once I've selected a point. It only shows my C drive which is grayed out so I can't select and continue. It gives me a yellow warning saying that the Protection of the system disk must be enabled.

  So as the restoration is not an option, I went to the recovery of the system where it will restore my factory settings, deleting all data. The problem is that I have a lot of valuable data in the PC, so I don't want to do this before you have a back-up. I tried to make the back-up, but the first back-up was arrested at 78%. The second he stopped at 13%. After that all other attempts to create a backup stops at 25%.

  I don't understand what to do. People say it's a problem with Windows 7 (64-bit). I don't have a Windows 7 CD either because it was pre-installed when I brought. I have an original CD of Windows Vista so I'll try to install first. Then, I'll try to copy my data and then restore my laptop to its factory settings. I hope this works.

  A guy suggested to replace the names of readers. So I reversed the C drive and D drive. He showed me all the readers in the restore option. But the restore has failed. Then he renamed automatically drives to their original state. I even ran sfc/scannow, but it shows me that a scan is planned and restart the PC to start. But when I reboot, it gives me the same thing again.

  Please suggest what to do...

  I installed Windows Vista professional from the CD. It worked perfectly... I want to say that I was able to retrieve all my data because it stored in a folder called Windows.Old

  But since I could not the wifi adapter and integrated graphics card Intel to work on the PC, I tried to restore factory settings. It doesn't let me access the Recovery Manager by pressing F11 on reboot I went to the computer icon and right-click on it. I selected manage and made my recovery disk a partition active. So after reboot it properly started the Recovery Manager. Right now I'm it back to factory settings. I'll let you know what happens after that. My data is safe, but I don't know if I'll be able to load my original OS.

• Reinstall an OS after hardware upgrades laptop

  I just bought a laptop HP 2000 series. Found that there not nearly at the speed I would like to and want to make improvements. Looking at bumping RAM 2 to 4 or 8 GB. In the research to upgrade CPU who perhaps understand a new motherboard as well. Don't think I'll be upgrading the HD right now, but always curious to know that if I do, how can I keep my current Windows 8? It came with the pc, so I have no backup discs and did I not a code. Will also change into effect of RAM and CPU something important that I should prepare in advance? Thank you.

  The RAM can be made easily. As you have on several versions of the HP 2000 processor is soldered to the motherboard. You'll find that the cost of a new mother/CPU card is more than you want to spend and less profitable to sell your laptop and buy something you like better.

  The key Code is integrated into the BIOS for Windows 8 systems. If you keep the same hard drive, it will work even with a new motherboard. The key Code incorporated in the new Board of Directors will be just activate as soon as you connect to the Internet.

  Upgrade memory will "work". You will not have to change anything.

  If you need a copy of the service manual or any other information post back.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• My laptop G62 does not illuminate

  I was sitting at my friends house on my pc. I let the battery 20% until I charge it because I didn't let the battery run for a day or two and it should be done to ensure the life of the battery. When I plugged in I continued to use it. But he's dead. And since I could not get on. Ive used 3 different Chargers HP to load, and it does not load. Im not sure whats wrong with it. The only thing I could think is that the port that the charger switch is messed up on my PC.

  Could someone provide me with assistance and possibly a number so you can call HP and ask them to address this issue. I saw a lot of technical but I'm not sure what number of HP I want repair.

  Thank you

  Try this:

  remove the battery, other devices and the AC adapter... Press and hold the power button for 20 seconds... Plug the power adapter only and turn on the laptop...

  • Click on start and type device in the search for field, and then select Device Manager.
  • Expand the batteries category.
  • In the batteries category, right-click in the list of Microsoft ACPI compatible with battery control method and choose uninstall.
  • On the taskbar of the Device Manager, click Scan for hardware changes.

  Alternatively, select Action > search the hardware changes.

  Call HP would be your last option...

• Reinstall the USB drivers for laptop G62-367DX operating system windows 7?

  Hello!! I recently got a HP G62-367DX laptop about a month and half ago and a mouse without a wire about two weeks later. The mouse no longer works last week and tried to put his receiver in other ports usb with no luck there. I also tried to do a system restore and uninstall usb drivers and then by using the device driver to find the hardware changes defective. The only thing I got was an error indicating that the software device driver has not been installed successfully. Is it possible to manually install the drivers I need, or is it a problem of operating system that may require a reinstall of my OS? I would greatly appreciate any comments. Thank you.

  You will need to reinstall the original chipset drivers.

  Go to the Start Menu -> click on all programs ->, click on manage recoveryr (open Recovery Manager).

  From there, under "I need help immediately" you can select "Hardware Driver réinstallation"-> click Next.  When you see the list of available selection drivers "ATi (or AMD) Driver VGA" and click Next.  Once it's done, click on finish, then will restart your computer and you can test your system/USB devices to verify that it is fixed.

  If it does not, meet with your specific model number or PN (product number).