Windows 7. C8100 HP printer. HP computer

Similar Questions

• How can I network a Mac and a Windows 7 set for printer sharing computer?

  I have a desktop computer with Windows xp, 32-bit, one with Windows 7 64 bit and a Macbook, can I configure them on a network to share a printer using my wireless D-Link hub?

  original title: home network

  Hello

  I suggest you to see link below and check if it helps.

  Networking computers running different versions of Windows: http://windows.microsoft.com/en-US/windows-vista/Networking-home-computers-running-different-versions-of-Windows

  Install a printer on a home network: http://windows.microsoft.com/en-US/windows-vista/Install-a-printer-on-a-home-network

  File and printer sharing: frequently asked questions: http://windows.microsoft.com/en-US/windows-vista/File-and-printer-sharing-frequently-asked-questions

  Hope this information is useful.

• HP Photosmart more B210: printer HP B210 connected to the computer with windows vista is not print documents

  Have had the above printer and computer wireless without any significant problems of printing until yesterday when I couldn't print liked anything from my computer. I disconnected the son / the power of my printer and router, waiting a few minutes and then reconnected the accounts.  Then I restarted my computer and retries impression with unsuccessful results. I then run the wireless network Test and the report does not show any problem.  Anyone have any suggestions to solve this problem.

  Thank you

  Hi @kattok001

  I see that you have had the minimum printing problem in the past, but suddenly you cannot print at all despite your efforts. I'd be happy to help you with this!

  Let's start our trip with HP print and Scan doctor. Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

   

• Fixed jammed paper but still cannot print from computer.

  Original title: paper stuck; I fixed it. Paper is no longer blocked, but (computer) printer doesn't recognize not the jam is fixed and I can not print from computer. What should I do?

  I used MAILING for an envelope; It's stuck; I unjammed it. A correction to the document (envelope) and hit the "print" key that he went into a ponytail and when I tried again too went to "wait in line"...  In the meantime I was able to print using the funchtion of the copy of the printer, but cannot send to cimputer. I then went in PRINTER and ytried to cancel all documents waiting to print thought, then it would be clear, but I could not cancel all.  The first "causedf jam" remained and repeat the message PAPER JAM and there is no paper jam now.   How can I delete it?

  Hi EleanorDavis,

  1. What is the brand and model of your printer?

  2 Windows operating system you are using?

  If you are using Windows 7, you can view the following items and see if it helps.

  Open the printer Troubleshooter

  Why can I not print?

  Hope this information is useful.

• I want to change my 'username' under Windows because when I print says the wrong name.

  I want to change my name on 'user name' on Windows, because when I print it says that bad name.  Also on certain actions in Windows XP, it says the wrong name.   I changed my username as administrator, but the Windows user name needs to be changed.  How do I do that?

  You can change the name of your Windows user profile (the name that appears on the Welcome screen when you first start the computer and also appears in the top of the start menu) using information connected by Debleena S, but (a) that can lead to confusion, because the folder of the file names do not change when you look at them in Explorer Windows and (b) doing so probably will not change the behavior that you describe (") ("when I print it says the fake name of family").

  What that means (what 'user name' have you changed?  "What does change"?) :

  I changed my username as administrator, but the Windows user name needs to be changed.

  It's a very bad idea to use the account named Administrator for daily use.

  Are what "window print" you referring?  Are you referring to something like "Comment" line on this picture that says "HP 4000 in laboratory of Steve Diamond 2-231"--> http://www.apl.jhu.edu/~hall/java/Swing-Tutorial/Printing/PrintDialog-W.gif ".

  Application, including the version, do you use to print?

  The "actions" in Windows, view the name of evil?

• Windows cannot install your printer driver and / or utility

  I have an Epson SX200 printer all-in-one and I am trying to install the device on a Vista 32 Dell laptop.  I don't have the disk for the printer, so I try to download the drivers for the printer on the epson site.

  I downloaded the drivers scanner and software sucsessfully, trying to download the point of finishing extracing printer driver files, I get an error message saying "Windows cannot install your printer driver and / or public services."

  I tried the support of epson who tried intsalling the pilot from other web sources, bottom of dissabling starting programs, etc.

  I searched the web but cannot find any patches or explanation to the problem...

  Any ideas?

  Hi J Bielawski,

  Thank you for using the Microsoft Windows Vista Forums.

  Method 1:

  Let us try to disable the Antivirus security software and check the number.

  Re-enable the security software after checking the issue.

  You can also try disabling the firewall and check the issue.

  Re-enable the firewall after checking the issue.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Check whether the problem is resolved.

  Method 2:

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Get windows Vista to reinstall on my computer

  Original title: Getting windows 7 to install in my computer

  My laptop with windows vista crashed. He came with a cd to reintall the operating system and I did not know that I should make a cd image and system restore. The flagship product is clearly printed on the bottom of my computer. I tried to buy a cd of windows vista retail, but the only option available in internet is oem versions, which I have no idea how to install. The microsoft Web page does not show an option to buy older versions of windows. Given that my laptop is 5 years old, the new version of windows 8 will be not possible to install. What can I do to solve my problem? Is there a website where I can buy windows vista to reinstall in my pc? Thank you for any information you can give me to fix my computer.

  Thank you for your information.  I'm not an experienced person in the facilities of computers, download so the procedure you describe to download windows from the internet links will not help me.  I don't have anyone who could borrow me a cd of windows.  So my only option is to find where I can buy a full commercial copy to do a clean install.  Amazon only offers oem versions and I don't know how to do the installation which is supposed to be done in a new computer.  Mine is old and already had a windows operating system that unfortunately crashed before that I made a backup of the system.

  Sort of, I really appreciate your help. Best regards.

  It is understandable that the download and make your own disks can become a daunting task.

  There is no need to buy a new edition of the sales at retail.

  There are still two other suggestions I gave you and the restore partition method:

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  It is regrettable that none of your friends have this DVD but if you happen to meet a friend or co-worker who is one that you can borrow and use a DVD of Microsoft Vista, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  And if you never rec'd a disc you ohave than re Partition Recovery - install,.

  Keys to press start to start the recovery process.

  Acer: Alt + F10

  HP/Compaq: F11

  Dell: F8

  Toshiba: 0 (zero)

  Sony Vaio: F8 or F10

  ASUS: F9

  etc.

  See you soon

• printer and computer connected but not printing

  connected my kodak c310 printer to my computer wireless but does not print

  Hi Ken,

  Thanks for choosing Microsoft Community Forums.

  According to the description, I understand that the computer is not able to print from a wireless printer.

  Let me go ahead and help you resolve the issue.

  To help you better, please answer these questions:

  1. what happens when you try to print?

  2. you receive an error message?

  3 have you tried to print a test page?

  4. to which application you want to print?

  I suggest you follow the provided methods to solve the problem of the printer.

  Method 1: Run the Microsoft Fixit.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 3: Install a printer on a home network

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-printer-on-a-home-network

  Due to operating system Windows or anything related to the printer, feel free to get back to us.

• Photosmart D5160 with Windows 7; Unable to print on CD/DVD

  I installed my Photosmart D5160 on my new HPE180t.  I used the "HP Photosmart and Deskjet full feature software and drivers" for Windows 7 64-bit.  Before, with Windows XP and HP Photosmart first, I was able to print on a CD/DVD.  Now, HP Photosmart Essential replaced HP Photosmart first, and I'm unable to print on CD/DVD.

  This same question was also documented on this forum, but no resolution found: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-and/Photosmart-D5160/m-p/154007/highlight/tr...

  I chatted with HP Technical Support online and they had me install Roxio Express Labeler for Windows Vista and run it in compatibility mode.  The result was that I was able to print on a CD/DVD, but the image has been moved to the top.  HP technical support said that I should buy a third-party CD/DVD printing software and they suggested call me Nero to determine what software to use.

  My questions:

  1. is this a known problem, the fact that the D5160 impossible to print on CD/DVD with Photosmart Essential and Windows 7?

  2. If someone has had this problem, what do you do to solve the problem?

  3. Another option would be to buy a new HP printer that prints on CD/DVD?  If so, what printer?

  Thank you very much

  Angela

  ``````````````````````````````````````````
  old computer: HP Pavilion PU131AV / a1050y, Intel Pentium 4 CPU 3.20 GHz, 2 GB RAM, Windows XP MCE, SP3 32-bit, Nvidia GeForce 6600
  new computer: HPE-180 t, Windows 7 Pro (64 bit), Nvidia GeForce GT 220, Intel Core i7 - 930 quad-core CPU @ 2.80 GHz, 8 GB of RAM

  That's what I did to solve my problem:

  1. buy a HP Photosmart D7560 h

  2 use Windows Photo Viewer to print on CD/DVD

  Note 1: The only way to buy the HP Photosmart D7560 h through HP's through its "upgrade" program, because this printer is no longer available via the HP shopping site.  Do NOT buy the D7560 h through the 'upgrade' of HP program because you will receive a refurbished printer.  After talking with the resolution of HP service, they advised me to buy this printer to a retailer who sells this printer yet.  I bought my new HP Photosmart D7560 h from newegg.com.

  Note 2: This printer (D7560 h) also uses the HP Photosmart Essential 3.5 when you use Windows 7, like the HP D5160.  When I installed the EP 3.5 and only had a printer is installed (as opposed to a printer and scanner HP), the 3.5 HP allow for printing on CD/DVD via the HP Solution Center.  The problem (not being able to print on CD/DVD via PE 3.5) occurred when I plugged in and installed my HP Scanjet G4050 scanner, which also uses the HP Solution Center.

  Note 3: I believe tha the D5160 could work with Windows 7.  It may be able to print on a CD/DVD, if you do not have an another printer/scanner HP device installed on your computer.  It may be able to print on a CD/DVD using the Windows Photo Viewer.

  Note 4: To replace the cartridges of 5 ink (XL) on the HP Photosmart D7560 h, it costs a total of $115.

  Let me know if you have any other questions.  Bottom line... I am able to print on CD/DVD with the D7560 h on Windows 7 operating system but I don't have to use the Photo of Windows display program.

  Take care

  Angela

• Brother mfc-8500 will not print vista computer

  My Brother MFC-8500 connected to an XP desktop on my home network does not print from my Vista computer on this network. He tries (when I try to print a test page, the printer wakes up-upward and sounds like it will print then goes quiet without printing).

  Thank you in advance for any help you can give me.

  Hello

  You did it changes on the computer before the problem started?

  Try the following steps:

  Step 1: follow the steps in the article below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Step 2: uninstall and reinstall the printer.

  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows?T1=tab04

• Photosmart c309g-m: cannot print from computer

  I signed up for e connect without realizing my photosmart c309g-m had to be able to access the internet, which he did not. Now my computer re-will not install my c309g-m. I now have no way to print from my desktop. I need help to re - install my c309g-m.

  Hello @botrock2227,

  Welcome to the Forums of HP Support!

  I would like to help you today with the relocation of your HP Photosmart Premium of C309g all-in-One printer on your Windows Vista-based computer. Can I please you follow the steps below.

  Please disconnect the USB cable from your printer or computer, is easier.

  Step 1: Uninstall the drivers:

  It is crucial for the repairs we have a clean slate to work with. So, I'm going you have to make sure all traces of your printer is uninstalled from your computer before install us a new copy of your Photosmart.

  1. Click on the Start menu
  2. Select all programs
  3. Select the HP folder
  4. Select your Camera HP Photosmart
  5. Select Uninstall

  Please follow the instructions on the screen to complete the uninstallation. Once your HP Photosmart camera has been uninstalled, proceed to the next step.

  Step 2: Remove temporary files:

  1. Click on the Start menu
  2. In the box "search programs and files" located just above to start after you click on it, type %temp% , and then press enter on your keyboard
  3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  4. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  5. Close the Temp folder when it is empty
  6. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 3: Reinstall the device:

  1. Please click here to download the package full feature software and driver for your printer
  2. Once the site opens click on the download button
  3. Once the download is complete, you can get a command prompt to run the installation program. If you see this, select run
  4. An extraction will occur automatically and your installation will launch
  5. Please follow the steps on the screen to reinstall your printer
  6. If you use a USB cable connection, do not connect the USB cable until the installation program invites you to

  Once installation is complete, please try to print to see if the problem is now resolved.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Windows 8 not find printer hp 4400

  I just bought a new pc with windows 8.  When I try to add my printer, it says something like "no devices found."  The printer is plugged in, turned on and works fine on Windows 7.  Also, even if the pc do not think that what anyone is connected, but he acknowledges that the printer is turned on or off by a 'windows' sound. The printer is a HP 4400.

  I solved this problem.  I went the Manager devices and found that my printer is not under printers.  It was listed under other devices.  I clicked on it checked the different tabs and I saw there was no information on the pilots. I got it through my computer for the drivers that I had downloaded earlier and he found them and complete the installation. The printer is now listed under printers and appears as an option when I go to print.  Hard to believe that he would be such a hassle to get a computer with a printer.

• PC Windows 7 and Vista Home Premium computer network cannot access each other

  I have an a Premimum Vista computer with a USB printer on a network with a Windows 7 Ultimate Computer.  Both recognize each other both are visible in the network on both computers) but I can not access one or the other.  Message on window 7 says "your computer seems to be correctly configured but the resource does not."
  "Any suggestions?  I need to produce and share printers.

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  In Vista, turn on password protected sharing. In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. create shares as desired. In Windows 7/Vista I usually shares its office and the Public directory.

  E. After you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but that is beyond the scope of this answer. MS - MVP - Elephant Boy computers - don't panic!

• Windows cannot recognize the printer after the print job is canceled

  When I installed my printer Epson XP - 410 on my laptop Windows 7, the installation of program established three identical icons in the box "Show hidden icons" system tray, a 'Epson XP-410 series named' and others adding "(Copy 1) and (copy 2) that." It was not critical until today when I ran in the paper and cancelled the print job. Now rather than see the icon for XP - 410 as before, Windows Live Photo Gallery is only to see the icon (copy 2) and the properties of the printer selection under print settings is looking for a printer that does not exist, say is not ready, showing without ink, etc..  Anyone know how I can get Windows to recognize the printer that is there instead of look for one that is not there? I tried to customize under Show hidden icons, but when I change the status of the any icons, they change all three at once. Any help would be so appreciated...

  Original title: duplicate icons in the box "Show hidden icons" in systray

  Hi Robert,.

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. What is the exact error message you get when you give the print command?
  2. You have related driver printer disks to install the printer?

  The question may arise if the package of printer from the printer model driver is either not installed correctly or has been corrupted.

  In order to diagnose and solve the problem, I would say, try the following methods and check if the problem persists.

  Method 1:

  Run the printer Troubleshooter and check if that helps. He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  Open the printer Troubleshooter

  If the problem persists, try the following method.

  Method 2:

  Try to uninstall and reinstall the last full have printer drivers and check if the problem persists.

  Step 1: Uninstall the printer drivers installed in the system

  • Open programs and features, click Start > Control Panel > programs and features.
  • Find and select Epson printer drivers in the list of programs.
  • Click Uninstall and follow the instructions on the screen.
  • Reboot your system.

  Step 2: Reinstall the printer drivers

  Reinstall the latest drivers at the following link that is compatible with Windows 7.

  Epson XP-410

  Additional information:

  Solve printer problems

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  Hi John - thank you for your response. For the benefit of someone else who has this problem, I was able to perform a miracle. Went to Start - devices and printers, found three printers instead of one year, removed the two copies and who has also removed the two unwanted icons in the systray. Now, everything's fine. Hope this helps someone.  Thank you, Christian...

• Home group password cannot be printed error "an error occurred while Windows was trying to print your Home Group password".

  Original title: group home password cannot be printed.

  While setting up my new wi fi Epson XP - 610 printer for private use in our House to be shared by two other members of the family, there are Windows 7 and Windows 8, I tried to print the password of Group of the House of my own computer which has Windows 7 and the error message came 2147500037 ' year error occurred while Windows was trying to print your Home Group password.  I wanted to print a paper copy of the House goes from group to the to maintain on file - I then went to the computer to my husband that I had just finished setting upwards so that he might use the new printer and I had no problem printing of the plug relative to the home going of this computer group.  My computer is the main computer and my husband and daughter use my different devices and share my files via WiFi.  What have I done wrong that Windows does not allow me to print the relevant worksheet related to hospitality group Pass Word.  I have no problem printing my printer other documents.  Should I delete my home group Password, reboot and put it in again?  It would help the situation without affecting other computers that share this password of group home with me?   Can you help me please - Kay

  Hello

  I suggest you follow the steps in the link below by Ajay K .

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/an-error-occurred-while-Windows-was-trying-to-print/90de018e-D55A-E011-8dfc-68b599b31bf5

  Let us know the status of the issue. We will help you.

• Windows 7 Pro remote printing

  I have a HP Envy 4500 all-in-one printer.  I am running Windows 7 and my client I remote in running me Windows XP Pro.  The printer was working well remotely.  Recently, my client set to upgrade to Windows 7 Pro and now the printer will not work.  When I print a test page, it says it is printing, and then he said: this is the removal.  When I tried printing with an Epson 310 printer it worked fine.  We uninstalled and reinstalled print drivers and HP printer on both machines a couple of times.  I also tried to install the printer with it physically connected to the computer as a local printer clients.  All the ideas that Windows 7 Pro would print then delete the content?

  Hello Claudia,.

  1. You receive an error message/code when you try to print using the HP Envy 4500 all-in-one printer?
  2. Work on the domain environment?

  I suggest that you run HP print and Scan doctor to find and fix common printer problems.

  Try printing HP and Scan Doctor for Windows

  The print spooler can be the cause of the problem, I would recommend that you print queue.

  Here is the method of stop print queue to force Windows General.

  1. go into Start, control panel and administrative tools. Double click on icon Services.

  2. scroll down to the Print Spooler service and right-click on it and select stop. To do this, you must be logged in as an administrator.

  3. then you must go to the following directory: C:\WINDOWS\System32\spool\PRINTERS. Delete all files in this folder. This will clear all print queues.

  4. now you can go back to the Services console and right click and select start the print spooler service.

  You can also go to a command prompt and type net stop spooler or net start spooler to start and stop the service.

  See also:

  Solve a problem

  Hope the helps of information provided. We know the results.