My computer does not support my keyboard more

Hello community,

Day before yesterday, I've known serious problems with my keyboard. My windows cannot successfully install driver on my keyboard, and I can't use it. I tried to use another keyboard with no luck.
I did a search on my own, I have tried to re - install manually the drivers but no luck. I tried to restore my system, but I thought that late. I was not able to restore my system 3 days I have there is cause of windows had not created a restore point. I tried to update my windows via windows update, but no new update is available.
So I decided to go online. I checked the Web site of the keyboard for the updates, but it does take place, cause my keyboard works with plug-and-play (it automatically installs the drivers when necessary), then I checked the responses from microsoft. I downloaded the fix it program from a specific thread on this site about drivers and hardware. The program has realized the error, tried to reinstall the drivers, but the drivers has not can be installed. Then the patch there software looked for new drivers on the web without bringing positive results.
Right now the only thing I can think of is formatting my drive and reinstall windows. I'm not sure, if this will fix my problem.
My system:
Office of OEM running legit windows 7 67-bit Home Premium
My keyboard is called slim keyboard, Logitech that works with plug-and-play (as I told you I pluged in my machine another keyboard, has experienced the same problem)
Any help appreciated.
Kind regards
Zacharias Mitzelos

Hello

-Is it a USB keyboard?
-What is the FIXIT you have tried to solve this problem?
-You are aware of any changes made on the computer before this problem?
-If it is a USB keyboard, have you tried plugging in various ports and on another computer to see if it works. If so, what was the result?

As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

a. click Start, then Control Panel.

b. click system and Maintenance, click System, and then click on Device Manager.

Note: If the Control Panel is in Classic view, double-click Systemand then click on Device Manager .

If you are prompted for an administrator password or a confirmation, type the password, or clickAllow.

(c) in the Device Manager, double-click to expand 'Bus USB controllers', right-click on the host controller, click "Uninstall" and click "OK".
Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

d. repeat step 2 to Uninstall all items under 'Universal Serial Bus controllers ".

Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

If you are still having the same problem then you can check the device USB drivers updated using windows update. See the following help link:


http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
If the edge of the question persists I'll ask allows you to check the chipset driver updates you find on the manufacturer's website. The chipset drivers normally integrate USB controller drivers as well.
For reference:

What to do when a device is not installed correctly?
 
Hope this information helps.

Tags: Windows

Similar Questions

  • Download a trial of cc 2014? My computer does not support 2015

    Download a trial of cc 2014? My computer does not support 2015

    Hi Jennifer,.

    Sure.

    Please download the CC 2014 from the link below:

    Direct download links of Adobe CC 2014: 2014 creative cloud release | ProDesignTools

    Kind regards

    Sheena

  • portable computer does not support. Yet battery monitor says "plugged in, not support.» What are some options?

    my laptop is connected, and yet power monitor says "plugged in, does not support." What are some solutions?

    Hi Joseph,.

    Something similar just happened to me. The first time they fixed it, they have replaced the adapter and the problem is solved. 5 months later it started to happen again and this time they replaced the battery, the motherboard and the milling table (thanks to heaven, it is still under warranty). Fortunately, thanks to the new adapters, battery started to load and the experience does not seem to damage it in any way (but you should keep your eyes on it anyway just in case).

    How they were able to say on my laptop - a Dell E1705 (other than just experience and common sense) was to go into the BIOS (starts, it should be a brief Flash on the screen telling you how to enter the BIOS setup or menu of the BIOS (usually F2) and check the battery information. He showed that the power adapter 'unidentified' instead "90W" list which should be when it is working properly and that the battery was not complete and not charging well plugged. They changed the motherboard and the roll the second time because it could also cause the adapter is not being recognized by the battery (or battery not not recognize the adapter).

    The beep is caused by power and its configured settings to warn you of a low and critical battery condition. In a normal situation, the computer will work right next to the power adapter and does not the battery (it is a way to help maintain the battery life is to run periodically and refill if we leave normally plugged in most of the time). If you remove the batttery entirely, the laptop will power? If this isn't the case, it is certainly at least the adapter or the motherboard. Eventually the battery will get if low, that he's going to sleep or hibernation, or the system stops (you should shut down normally before him to cold shutdown like that). If If, then I expect the tone to go further because it will detect is no longer a low battery charge, because there is no battery - but then you'll want to be sure to use either a battery backup UPS, or at least a surge protector otherwise already in place because if you lose the laptop battery will crash hard and this is not good for her.

    I'm using 32 bit Vista Business SP2 and in Control Panel / sounds / Sounds there is an option for low battery alert. The default to have this. In this case, you can turn off to avoid the beep. In addition, you can go into Control Panel / Power Options, click the plan settings and click on battery. It will provide you with levels of low battery and critical battery and you provide measures to be taken in such a case. If you are unable to operate the system without battery and it is so weak that the alerts began, you probably fell to 11-5% remaining. You can adjust actions to nothing for bass and stop to criticism that 5% is about as close as you want to get to the point where you can hang. Then, you just need to wait until it is repaired and the appropriate parts are replaced.

    Even if you have still some life in it, it is best to contact the manufacturer (they the some have the right parts) or a computer of reputable workshop to get a good diagnosis (perhaps by phone at first), a determination of what must be fixed, the applicable fees, schedule, if it is still under any kind of warranty , and what needs to be done in which order of repair. They can find the adapter is OK and it is just the battery (or vice-versa or two or more). But that's essentially where you need start.

    I hope this helps.

    Good luck!

  • Computer does not detect my keyboard (yamaha psr-e323)

    I'm trying to connect my keyboard to my computer vista laptop. I have already installed the driver for my midi cable (tab e-mu 1 x 1) and Yamaha musicsoft downloading. The musicsoft downloader can detect my keyboard, but not the songs I recorded on it, I can not send midi files from my laptop to the keyboard either. Some other programs, audacity and such, can not detect it either. Somehow, only synthesia works perfectly well.

    I thought that this could be because I did not install the midi driver Yamaha, so I downloaded it. However, the installation process did not detect my keyboard either, I just got a message that said I connect my camera while it was connected (midi in-> out,-> out midi in).

    Does anyone know how to fix this?

    Hello

    Contact the manufacturer of keyboard on this issue.

    For reference:

    Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  • My computer "does not support" lightroom. In other words, it will not download

    Bought lightroom last night and came home to download. It gave me an error that my computer cannot support the download.

    What in the world I am doing...

    You should try the software first, or at least check to see if your material conforms to the system requirements for the software before you purchase.  If it's a matter of your machine not answering does not meet while the only actions available are to return and get a refund or to update your computer to meet the requirements.

    Lightroom - https://helpx.adobe.com/lightroom/system-requirements.html

    Return, cancel or change an Adobe order-

    http://helpx.Adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

  • Windows Virtual PC cannot start because this computer does not support virtualization hardware-business intelligence

    I have a Sony Vaio VGN-NW235F and I am a student in the it field. A lot of my software are not supported by Windows 7. So I upgraded my Windows 7 Home Premium to Windows 7 Professional so that I can run Virtual PC. But I'm not able to run due to the above error...

    Please kindly help me

    Thanking you,

    Paths

    Salvation of the paths,

    Looks like you are trying to get XP Mode configured, that will install a virtual machine for you to run your legacy programs.  This feature is available in the professional versions, full and Enterprise edition - so your property in this aspect.

    You get this error message because you do not have the chip installed for hardware - assisted virtualization technology and it's good. you don't need more.  Click on this link http://www.microsoft.com/windows/virtual-pc/download.aspx and select your language and edition.  Then scroll down to step 3.  You must download and run the third component called Windows XP Mode Update. This update will remove the requirement that you have the chip mentioned above.

    That should do the trick.

    Barbara

  • Tried to download the latest version, but my computer does not support. While trying to install it replaced my old version and now have no firefox

    For months its been my firefox browser is out of date, saying tour so, today, I finally managed to update but when trying to install it, it removed my old version and when I tried to install the new one it says it was not compatible. So now I have a version that does not work and if I remove I don't have Firefox at all. I stress because everything (100) my favorites where on the old version.

    I tried and tried to find an older version, but either they are either not compatible or the file does not exist. I'm a bit of a technophobe so I know what else to try.

    Help, please

    Katie

    You can also find it on the CDN server.

  • Illustrator CC2015 (19.0.1) does NOT support my Geforce970 more

    Someone at - it the same problem?

    The support of my Geforce970 went into 19.0.1.

    The most recent driver 353.30

    AMD FX 6100 3.30 Six main done inside now work.

    In addition, hat irgendjemand die gleichen problem?

    Nach dem Update auf 19.0.1 today works die GPU Beschleuigung nicht mehr.

    ICH habe erst vor Kurzem auf eine Geforce 970 media da AMD schlecht supported wird.

    ---

    GPU-information:

    OpenGL Version: 4.5.0 NVIDIA 353.30

    Number of views: 1

    Anzahl der Treiber: 1

    Treiber [0] name: NVIDIA GeForce GTX 970

    Treiber [0] Treiberversion: 10.18.13.5330

    Treiber [0] Treiberdatum: 20150617000000.000000 - 000

    Treiber [0] adapter-RAM: 4095

    Treiber [0] Installierte display-Treiber: nvd3dumx.dll, nvwgf2umx.dll, nvwgf2umx.dll, nvd3dum, nvwgf2um, nvwgf2um

    Hello

    We have implemented a relief in cases where we get errors OpenGL CPU. This decline is new to 19.0.1. It is quite possible that one of the content in the file has triggered a temporary error OpenGL leading to relief on CPU (i.e. disable CPU) for the session

    -Ashutosh

  • Pavilion 23-b244 AiO: the system recovery media does not support this computer

    Hey all,.

    I had a power outage (1 TB) HD material on me about a week ago and replaced by a (500 GB) SSD, not purchased from HP.  I then ordered the recovery disc from HP for this particular serial number.  Whenever I boot on the recovery discs, I get "this computer does not support the system recovery media. You are not able to restore the system with the media. "The Minsize argument in the instructions to build on the DVD file provides a minimum of 140 GB, so I don't think I have a new smaller drive system is the question.

    Last month I have updated the firmware to v80.08, and in the bios "product name", 'SKU number', 'serial number of the chassis' fields are all empty.  In "System ID", everythign is empty except UUID and family name.

    I think that's why I'm not able to boot to recovery discs?

    Any help would be appreciated, I have use this computer for quickbooks and have bee unable to do accounting for a week and a half.

    Figured it out! On my Pavilion, you press Ctrl + A in the bios then click on 'System IDs'. Then I was able to type in the ID to build my recovery and support the byte to feature on the sticker under my machine. F10 to save then the recovery media recognized the computer properly and booted up!

  • DV6-6c15nr, "the system recovery media does not support this computer."

    Hi all. I'm trying to reformat my laptop (dv6-6c15nr), but when I try to reformat to f11the recovery manager f, all options are such that the system restore and restore to factory is grayed out. The next thing I tried was a set of recovery disks. When I used the recovery disks, it showed the message "this computer does not support the system recovery media. You are not able to restore the system with the media. 0110 A601UA #ABA - A1U60AV. Why can I not reformat my laptop... I remember that I was able to reformat until I sent offshore to get the hard drive and the radiator replaced by hp year last April. Now I can't get to... that this has to do with anything? someone please help...

    I also tried without the bios downgrade F.19 REV: a. which do not help either.

    It seems that the motherboard may have been changed and the information system (tattoo) has not been updated to match that of your computer. While I can't fix this for you, I can suggest some possible solutions and I work to spare;

    (1) you can contact HP Customer Support and ask that they correct the problem.

    (2) attempt to control that recovery discs for the model of the motherboard is currently labeled as.

    (3) If you can still read the Windows product key of 25 characters on the Microsoft COA affixed on the computer, you can install Windows 7 using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7 SP1, create the installation media and install Windows 7 SP1 using the 25-digit key from the COA Microsoft on your computer.

    If you have any other questions, feel free to ask.

     

    Please click the White Star of KUDOS to show your appreciation

  • Computer react not or installation keyboard during start-up

    My computer shut down and I need start in the last known configuration mode. My computer does not meet my keyboard as it has become uninstalled. I get a black screen after the windows start page logo and it will not go to the login page. I'm at my wits end with this diagnosis.

    I need to solve the problem of keyboard first to go further.

    It was a warning here my anti virus software. In any case as I mentoned until I have to get my keybord first working useful suggestions on what to do. Before I can restart after the windows welcome screen.

    Keyboards are fairly easy to find and borrow. Use a different keyboard, the PC back on, press the F8 key repeatedly until you see this Menu of Options Advance:
    Select the highlighted option: last good known Configuration.

  • Do not use the Brink game on my computer laptop-message of error: the current video card/driver does not support openGL3.1 or newer.

    I bought this game for my son who has installed ok. But when pressed on play error message: the current video card/driver does not support openGL3.1 or newer.

    We have Windows Vista SP2. Does this mean I now have to buy a video card or y at - there a way around this without costing me more money?
    Kind regards
    Sam Towle

    Hello

    I would suggest trying the following methods and check if it helps.

    Method 1: make sure the game is compatible with your computer.

    Method 2: update the video card driver and check if that helps.

    Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

    If both methods fail, you will then need to get a new video card.

    I hope that helps!

  • I have IE9 in my computer, but it does not support my printer Canon Mg5170. How to solve this problem?

    I installed IE9, but it does not support my printer MG5170 canon. After you have installed the Easy WebPrint EX, I don't see the toolbar. Canon technical support has informed me that Internet Explorer 7 is required.how can I solve this problem?

    Hello

    you don't say which version of IE you had installed before IE9

    Uninstall IE9 to revert to the previous version

    read below

    http://Windows.Microsoft.com/en-us/Internet-Explorer/help/IE-9/How-do-i-install-or-uninstall-Internet-Explorer-9

    To uninstall Internet Explorer

    The following instructions apply to Windows 7 and Windows Vista.

    1. Click the button start , type programs and features in the search box and then click the display installed in the left pane updates.

    2. Under uninstall an update, scroll down to the Microsoft Windows section.

    3. Right-click Windows Internet Explorer 9 and click on uninstall and then, when you are prompted, click Yes.

    4. Click one of the following:

      • Restart now (to complete the process of uninstalling Internet Explorer 9 and restore the previous version of Internet Explorer).

      • Restart more later (to wait until you stop or restart your computer).

    Note

    After you uninstall Internet Explorer 9 RC, the previously installed version of Internet Explorer will be available on your computer. There is no need to reinstall.

  • Hard drive replacement, windows support, media does not support this computer?

    Laptop HP G72 M #-C55DX, I replaced my hard drive with the same OEM, 4 recovery disks made when I bought the laptop new, replaced the hard drive, run startup test, memory and hard drive OK, insert #1 recovery disk, windows loads, then get the system recovery media does not support this computer. you are not able to restore the system with the media. I have windows 7 Premium I don't know what to do next. Thanks for the help. Frank

    My recovery disks that I had at the beginning are bad. Has bought the HP boot disks. up & running, thanks Frank

  • HP ENVY PHOENIX 800-030qe: the system recovery media does not support this computer

    Hello!

    I can't recover to factory settings using recovery media (4 DVD) after changing HD (the previous device has crashed/broken).  The message is: "the media recovey system does not support this computer. You are not able to restore this system with this media. »

    So, what should I do?

    Thank you very much.

    Luiz Borges

    Upgrade the BIOS/downgrade will not fix it unfortunately.

Maybe you are looking for