My computer has stopped backup.

Similar Questions

• My computer has stopped downloading of updates due to an era 8007000 b. What does that mean?

  MY computer has stopped downloading of updates due to an era 8007000 b. What does that mean? Donald strickland

  Hello donaldstrickland,

  Thank you for using Microsoft answers Forums.

  Solution:

  Windows Update, Error 8007000 b

  If you receive the 8007000 b error when you try to install updates for Windows 7, the Windows file system transaction log is damaged. The transaction log is used by the Windows file system to recover when a file error occurs. To correct this error of update, you clear the log. Here's how:

  To clear the file system transaction log

  1. click on the Start button and in the search box, type command prompt.

  2. in the list of results, right-click Guest, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. at the command prompt, type the following command and press ENTER. (This command assumes that drive C is the drive where Windows 7 is installed. If Windows is installed on another drive, change the drive accordingly letter.)

  true fsutil resource setautoreset C:\

  4. you should see a message saying that the operation was completed successfully. If this is not the case, check your spelling and try again.

  5 Type Exit and press ENTER to close the administrator: command prompt.

  6. restart your computer.

  7. download and install the update again.

   

  That should solve the problem.
  

  
  Thank you.

   

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• My computer has stopped responding to the parameters in my power options tool.

  My computer has stopped responding to the parameters in my power options tool. "IE I settled on 'disable the monitor in 15 min', turn off hard drives in 20 minutes" and "mode standby in 25 minutes.  But it does not follow these parameters. He just continues to run.

  original title: Auto standby until the day before

  You can try to change the settings, see if they meet the new settings and then change back to your desired configuration.

  Please give some more information:

  brand and model of the pc

  current antivirus

  Operating system and service pack

  Also this system to be free of infections:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  After return with results and INFORMATION.

• My computer has stopped recognizing the HP7450 printer, although showing the connection to the USB "ready".

  My computer has stopped recognizing the printer plugged in usb port

  Hello

  ·        You are able to print a test page for your printer?

  You can try the suggestion given in the article below and check if that helps get the printer to work.

  http://support.Microsoft.com/kb/308028

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer has stopped recognizing my DVD burner.

  My computer has stopped recognizing my DVD burner. It will still read and write to a CD. I don't remember adding something new to the computer, but am not sure when it stopped to work with precision. The Device Manager shows his work; I tried updating the driver but it says that it is the most up to date; I uninstalled and reinstalled; I checked regedit and there are no filters; It is recognized in the BIOS. The store said it is not the hardware and you want to reformat the computer. What can I try before taking this step? Thank you.

  Hello Allisonjak,

  Thank you for your message.  You said try to update the drivers.  You go to the computer manufacturer's website and download/install the latest driver for your computer?  If this isn't the case, it is the recommended method for updating your drivers.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion: Before port USB on HP desktop computer has stopped working

  My HP desktop computer is about 2 years old and has two USB ports on the front and a number on the back. I had no problem with any of the ports until I used a USB in the port now broken and caused a power outage that now this port doesn't recognize any USB device.  It says "USB device not recognized.  The last USB device you connected to this computer worked badly and Windows does not recognize. »

  I tried to uninstall and reinstall the USB ports on the Device Manager and have lived all the suggestions on the HP support site and the Microsoft support site. The defective USB key must have caused damage to the track. I hope you can suggest something that I can do to get it working again.

  Hello

  The only port on the front is damaged. The USB key must have damaged only this USB port. I'd like to reuse this memory bar.

  You need to replace the USB module, two ports USB 3.0 of housing as the two front ports use the same module and connections to the motherboard.

  You will probably need to go to HP for the part.

  You should be able to get access to the component by removing the front bezel. Remove the side panel also. You should see the connection of the cable and add him the USB 3.0 connector front on the motherboard.

  Jay

• Pavilion TouchSmart 23 all-in -: computer has stopped working!

  Good then yesterday I rebooted my computer and when it started to load the hp logo came and it's just... stayed there! I can't upload a picture at the moment, but it's just a black screen with a blue hp logo. Is something wrong with it?  Please help (the reason why I rebooted, it was also because I wasent download anything)

  Hello @Cilote12,

  I understand that your computer Windows 8 is freezing at the HP Logo during startup. I'm you provide a HP support document: computer does not (Windows 8), which has the necessary steps in order to solve this problem. I suggest review you the document and apply the measures contained in.

  I hope this helps. Thanks for posting on the HP Forums. Have a wonderful day!

• Computer has stopped working properly after a Norton updated.

  Yesterday, my computer did a update of Norton, and since then I can't use my computer.  I double click on an icon & it just "chew" and does nothing.   Then I try & press "CTRL/ALT/DELETE" to stop this & nothing happens.  Or, other times I double click on an icon and nothing happens.   Rebooted the computer several times & still nothing.  I have Windows XP.  I want to just bring the computer back to 2 days ago & everything goes back to how it was.

  What Norton product and version do you use?

  You can try the system restore to go back a few days. But first you need to disable the product Tamper Protection Norton.

  See:

  http://support.Microsoft.com/kb/306084

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

• My computer has stopped booting upward - hangs when starting

  It gets to the Windows Vista initial loading screen and then stops.  I have run all diagnostics equipment with Dell and they said it's a matter of windows operating system.  I tried to reinstall and start the printer dell provided OS DVD and it starts to boot and then crashes. Any ideas?

  Hello

  ·          Will there be any changes made to your computer before this problem?

  Method 1: Check if you are able to start the computer in Mode safe.

  See: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

  Method 2: Run a startup repair.

  Refer to: http://windows.microsoft.com/en-US/windows-vista/Make-system-repairs-from-the-Windows-Recovery-Environment-from-Windows-Vista-Inside-Out

  See also: http://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&l=en&s=gen&docid=DSN_343119&isLegacy=true

• my computer has stopped recognizing my password, now I can only sign as a guest

  When I type my password, I get a message saying that my account is not accessible.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Hard drive on my computer has stopped reading all discs.

  Original title: cd driver problem

  We have windows vista, the hard drive works at all. We have tried to re install from windows thwe site, he says that we already had the best driver. What can we do?

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My computer has stopped playing games after I moved. Acceleration dierct3d says that it is not available. The directdraw acceleration indicates also the same. How to solve this problem?

  When I go to dxdiag trouble shooter staes directdraw acceleration is not available and direct3d acceleration is not available. This computer plays of the games without problem before I moved it. Now, it won't.

  When I go to dxdiag trouble shooter staes directdraw acceleration is not available and direct3d acceleration is not available. This computer plays of the games without problem before I moved it. Now, it won't.

  I could solve the problem by going to the manufacturing of system site and download the updates I needed. Once I installed all the updates for my video driver, the games worked well.

• The sound on my computer has stopped working. I went into sounds to check and it seems fine. People can hear me when I'm on the video but I can't hear them.

  cannot get sound on my computer

  Hello Ancon,

  Thank you for your message.  Which application you use during your video chat?  Most likely, it is a wrong parameters, either on your end or the other person's computer.
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Explorer has stopped working error

  Yesterday, I tried to install a program on my computer that is running windows vista after that the computer has stopped working.  It starts go to the home screen and then the screen turns black with a white cursor you can move.  I can start the Task Manager and the cmd mode.  I can boot into safe mode only until I get the message windows explore has stopped working a problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I tried to boot to the last known good configuration, but that did not work.  I think that the program has put the memory on the Board, but I'm still not a person of intermediate knowledge on this topic.  We didn't backup our files and of course need them.  Thank you

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Media Player 11 has STOPPED WORKING... XP AND Vista problems

  I have a home network with computers XP and Vista.   Computer XP is Dell Dimension 4600.  Vista computer is HP Pavilion Slimline.

  On or about 6/10, WMP 11 on the Vista computer has stopped working properly.  Video will not play digital video (mpeg format), previously working but playing the audio from the file and the timer updates the video plays.

  Attempt to update the codecs (K-Lite).  Didn't help... now, the native multimedia player K-Lite is the same way.

  Deleting updates 6/10 and later versions.  No change.

  System restore of flowing it at 6/9, 6/5, 6/4.  Restoration is back with "unexpected error".  The logs show a NTFS corrupted and suggested chkdsk run.  Filled with chkdsk c: /R with NO ERRORS.

  Ran SFC/scannow on Vista machine.  He said "no violation of integrity.

  Today (6/14), WMP 11 on XP machine has stopped working.  Videos will be running, but are extremely hectic, like something, it's stealing time CPU; However, the system idle process is higher than 90%.

  What the hell is happening?

  EDIT TO add: I want to stress something else... Movie Maker on both machines still work.  Videos can be imported into and read correctly.

  I had things market... Finally.

  I have none of the above.  I do not have the installation diskettes (OEM on a computer HP... no disks provided with the machine, have only the recovery disks that I made when I configured the system).

  So until I went looking for a set of discs that I use, I did the following... and I * think * I know I could fix it, but I do not know...

  I have re installed the K-Lite codec pack... only of video codecs.  I essentially took the video installation by default EXCEPT... I turned off video acceleration.  Intel Express Chipset not allow me to disable hardware acceleration by using its own GUI and Windows Vista would not touch parameters of acceleration as Intel ordered to them.  Well, I suppose that K-Lite has been able to do what could not do Windows and Intel wouldn't let me do.

  Don't know if that was the fix or not, but everything works now.