My DVD player doesn't read DVD after update BIOS (Probook s 4540)

Similar Questions

• Pavilion g6-2215sia: CARD without WIRE NOT DETECTED AFTER UPDATE BIOS

  Recently I have updated my BIOS on my laptop HP Pavilion g6-2215sia think he'll adjust the hardware acceleration feature missing in my system (there is no option in my BIOS to enable virtualization technology). My BIOS version was F.12 and I've updated to F.24, but after update BIOS all my wireless functionality no longer works (including my wifi and bluetooth), and still there is no option to enable virtualization technology in my BIOS settings. On my Windows 8.1 x 64 Pro wifi and bluetooth options are grayed out so I can't turn them on or off. I tried to reinstall my bluetooth driver, but the software says that it doesn't detect any bluetooth hardware. Even when I restart and boot in all my Linux distributions installed on my system (Ubuntu, Quina and Kali Linux) and my x 86 Android, they still do not detect my wireless capability (says Ubuntu, "wifi is disabled by hardware switch").

  To confirm that this was not a software problem, I has conducted an audit of start-up and tested for my wireless module and got this result, "without WIRE MODULE CHECK: NOT INSTALLED". The only way I can get my Windows operating system to recognize my wireless (wifi and bluetooth) is now by doing a hard reset, when I unplug my laptop from the power supply, remove the battery and hold the power button for about 30 seconds. When I turn on my system, then I can turn my wifi/bluetooth on my Windows. But if I restart my system the problem comes back and I can't turn on my wireless. So basically, I have to avoid questioning my system off and only Hibernate, so that whenever I turn on my laptop I can use the wireless. If I restart my system so I have to repeat the hard reset in order to use my wifi/bluetooth, which can be very annoying.

  The problem is that I often use my other Linux disributions and I have to restart before starting in them so that my readers will be mounted read/write, and when I do my Linux can not detect my wireless and it's a serious pain for me because I need to use my wireless often for internet connection.

  Please I really need help on how to fix this and get my wireless working normally without having to do a hard reset every time. I tried to restore my BIOS F.12 unfounded but I don't have the image file (I extensively searched the Internet to find, but does not). I've even updated again to F.26 but I still have the same problem (my current version of BIOS is F.26).

  If you see no updates the BIOS in your list of drivers - where do you have the updates to the BIOS, you used?

  Try here - if you do not see the list of the BIOS, use the "Edit" button to change Windows 8.1 to Windows 8:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-2200-notebook-PC-series/5296082/model/5315061

• Satellite Pro A300 (PSAG9E) - after updating BIOS Windows will not start

  Restart went well after update BIOS and Windows XP logo appears loads for a few seconds then a beep and restart - last good known or start Windows normally same effect.
  Reboot back to start - this is a new laptop - using the BIOS of Toshiba s official download site.

  Quite annoyed to try to find a way to upgrade or downgrade the BIOS.
  Took battery and RAM to see if I can delete it?

  Any ideas anyone?

  I think you mean BIOS * update * and do not upgrade ;)
  An upgrade is not possible

  However, you can try to remove the battery and the AC adapter and wait an hour. After that, reconnect the battery and the AC adapter and try to start Windows.
  Moreover I would load the default settings in the BIOS before starting Windows.

  If it doesn't work, it seems that your ROM module needs to be reflashed. In this case an ASP can help you.

• Touchpad no longer works after update BIOS on Satellite A500-1GL

  Hello world

  I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

  Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
  After that Windows 7 (x 64) started the touchpad no longer works...

  I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

  I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
  But unfortunately it still doesn't.

  Now, I'm out of ideas, can anyone help?
  Is there a chance to get the older version of BIOS to downgrade it?

  Thanks in advance ;)

  Hello

  It seems strange that after update Bios touchpad no longer works.

  > Is there a chance to get the older version of BIOS to downgrade it?

  To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
  The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
  Advice for the future; Do not touch the running system.

  Good luck!

• Dell Vostro 5470 not get Dell Logo after update bios in Windows 10

  Dell Vostro 5470 not get Dell Logo after update bios in Windows 10.

  Laptop computer has restarted:

  1 Fireed power led,

  2 Powered hard drive for 2 seconds to turn it off.

  3. stops...

  No Dell Logo, no beeps, can't go in the Bios.

  Test LCD works OK.

  Remove the module of Ram, power on and listen to beep

  Pressing the END key and power for laptop has no effect.

  Any idea?

  Yes. I did it.

  Laptop have bios Phoenix.

  Phoenix Bios have restored the USB Flash procedure.

  This procedure to restore the BIOS:

  1. download USB flash less than 4 GB.

  2 format in FAT.

  3. get your flash update of the Dell store - xxxx.exe

  4. run cmd.exe and in the command prompt, run /writehdrfile xxxx.exe

  5 extracted copy of Bios.cap for the flash player.

  6. turn off the power to the laptop.

  Next 7,8 step may not be necessary but I did it.

  7 disconnected all perihpericals with battery and charger.

  8 disconnect the HARD drive

  9. connect the USB on the laptop on the right side.

  10 press and hold the END

  11, Pluged the power cable and the relase the END key 1 second after the power cord is in.

  12 USB led on stick flashed quickly and we see the process of recovery of the Bios on the screen.

  13. After finishing laptop restarts and worked well.

• Cannot use the recovery CD after update BIOS on Tecra 9000.

  Failed to retrieve the system (Windows 2000) after update BIOS on Tecra 9000. Recovery CD says "it's a bad machine. Can I go back to old BIOS? Another solution?

  Hello

  Maybe chain can confirm, but I put t he seems the best idea to mix stuff designed for laptops Americans and Europeans models.

  Can you please confirm if the method described in the previous ad works?

• DVD player doesn't read the Windows 7 restore disk

  Hello

  I just bought a Samsung NP350V5C-A02UK laptop and I'm having problems with the DVD player.

  It will read most discs that I put in it except the Samsung OS restore disc that came with it.

  I've also downloaded an iso file of Win7 (64 bit), and created an installation of this use of the DVD disc, but then the laptop could not check the disk.

  I have attached a USB DVD drive to the laptop and he could read the Samsung OK restore disc is one that makes me think of a problem with the DVD player.

  In Device Manager, the DVD drive is listed as:

  IDE\CDROMTSSTCORP_CDDVDW_SN-208BB___SC00___\4&32B8AC6E&0&0.1.0

  Can someone help before I have send the laptop return it for a refund?

  Hi Steven,

  The Microsoft Article available at the following link has a fixit and a full list of steps that allows us to solve the problems of software generated in a DVD player. Please read the information contained in this article, and see if the steps mentioned in it helps you to solve this problem:

  http://support.Microsoft.com/kb/982116

  Note: Certain steps of this article may result in changes to the Windows registry. Any incorrect changes to the registry could prove fatal. So, to be on the safe side, please take a backup of your registry in this article before you make changes to registry.

  If the steps in this article does not improve the situation, we have a high probability that the DVD drive has hardware problems. Since this is a new computer, I suggest you to contact Samsung support in this case. Samsung support would be the best point of contact for you to check your hardware. Here are the links for the Samsung support:

  http://www.Samsung.com/us/support/

  http://www.Samsung.com/us/support/contact

  Hope this information is helpful to you. Don't answer if you need help with Windows, we will be happy to help you.

• Satellite A300 - after update BIOS black screen

  Hi all
  I just applied the update to the BIOS on my Satellite A300. After the update is successful, the system carries out a restart. Now when I try to start it I get no display, I can hear the proceedings to hear it, the CD player, the DVD, playback led flashes.

  The ASP Toshiba rang me (phone call), the motherboard must be replaced after a bios update, but it is very expensive for me :(
  Please can you tell me if they are a way to fix it without replacing the motherboard? The bios is an Insyde and according to the site Internet the bios bios [recovery technology | http://www.insydesw.com/press/2008/press_060308.htm]. I guess that the ASP does not know that.

  Please can you tell me how to start the recovery procedure it is possible (combination?),.
  Any help on fixing the laptop without replacing the motherboard will be much appreciated.

  Hello!

  I think that the ASP is just and in the worst cases, the motherboard should be replaced.

  You can try to remove the battery and the AC adapter. Wait one hour and then connect the AC adapter and the battery and try again.

  If it doesn't work you should go to an ASP. Perhaps a BIOS reset can solve the problem, but it can be done from an ASP.

  Good bye

• Satellite C660 - no Internet connection after updating BIOS

  I am a novice user and have a Satellite C660 under warranty that I don't use for surfing the net and Ebay so I hope I can explain my problem!

  Toshiba bulletin board said that the need to update BIOS, so I followed the instructions but since then I have no internet connection, and cannot restore the connection that I lost all help Toshiba Bulletin Board today lost and none of the programs to sort the problems work - e.g.set assistants etc. I did not yet create rescue disks, but if I try to create them now I'll be able to restore to factory settings?

  Can someone tell me if it's a failure caused by the BIOS update or I would return laptop to John Lewis for repair? Thank you very much for reading this

  Hey Buddy,

  The default settings in the BIOS load after update? If this is not the case, go into the BIOS and load the default settings. You can enter the BIOS if you press F2 before Windows start and then press the F9 key to load defaults. Then save & exit the BIOS Setup.

  You can access the Internet now?
  You try to access the Internet with LAN or WLAN connection?

  Also check device manager if all devices are recognized correctly.

  > I did not yet create rescue disks, but if I try to create them now I'll be able to restore to factory settings?
  You can create the Toshiba Recovery disk every time. Just launch the pre-installed Toshiba Recovery Media Creator and follow the instructions on the screen. You need just a few blank DVDs to create the discs. Disks contain a factory image of settings which can be restored each time and how many times you want to so with these disks, you are on the safe side ;)

• Satellite L300 - dead after update BIOS!

  Hello!
  I had a problem with Windows XP, so I decided to update the BIOS. After update, I got 3 lines of errors. After the reboot, nothing appears on the scree! I have toke off the power to the battery and the power cable for some time, I had taken only one cable, but still nothing! No beeps, some noise of hard/dvd disc on begging. Can someone advise?

  Thanks in advance!

  Thom

  Hey Buddy,

  It seems that the BIOS is damaged and it must be reflashed to an authorized service provider. This is a delicate procedure so these tools can t be downloaded and are only available for the FSA. On the Toshiba site, you can find a list of all FSA. Simply contact the closest in the country and ask for help. Guys will help you best possible
  However, this forum can help you:
  www.theeldergeek.com/forum/index.php?showtopic=21209

• Satellite A210-199 - after updating BIOS only seeing yellow on

  Hi all, help is needed.

  After a BIOS updated with the help of Toshiba TEMPRO laptop Satellite A210-199 stopped working. The updated spent normally, but when it was turned off is more responsible. All this time the yellow indicator Burns power only. In a few minutes a laptop trying overloaded, but has no outside effect and so constantly.

  How is it possible to correct?

  Hello

  Well, it seems that the BIOS update has failed or something else. Maybe the ROM module must be reflashed by a technician of the laptop.

  But you can try this workaround first:
  Remove the battery and the AC adapter and wait an hour. Then reconnect both devices and try to start the laptop.

  If it doesn t work on the Toshiba site, you can search for nearest authorized maintainer:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good luck!

• Dead phone after update bios that came from HP Support Assistant

  Laptop: HP Pavilion DV6-7001TU

  OS: Windows 7 Home Premium

  HP support assistant recently recomeneded a BIOS update and I went ahead and did it. After the BIOS updaet when I press the power button / computer does not start (the power button lights up, the CD ROM is checked / departures) but nothing on the screen.

  Please help ASAP! The flash update was InsydeFlash

  Sorry for not adding that.

  I stood there, so I saw what he was doing.

  1. He pulled the battery, memory, HARD drive.
  2. Unplugged the power cord.
  3. Behind the memory card was the BIOS, he used a tool to read the number of the BIOS, which he used then to find a former chip (this part is chosen).
  4. He pulled out a very small part of the chip old (was the thickness of two human hairs, I think).
  5. Use a fan that blew up to + 400 degrees celcius heat and used a tweazer to put the old chip on the laptop, the curious one, he explained that he did a hard reset on the BIOS and is now flashing a new BIOS chip.
  6. After having done that, he threw the old chip out, left the laptop cool (he threw the chip he found in step 4, the laptop has the same BIOS chip it had originally.)
  7. After that he used gasoline and clean connectors of memory, wifi connectors, the connectors to drive HARD, the BIOS and reset the time system by removing and then pluging in the system battery.
  8. Put the battery back in and booted the computer and vola! everything has started to work as usual, except that I had to re - configure some settings in the BIOS (for my taste) and correct the time system.

  I hope this helps.

• Satellite L50-B-16V - Starcraft 2 performance decreased after update BIOS?

  Hello

  I played Starcraft 2 for awhile on my Satellite L50-B-16V using average settings quite fluently, however, now the computer's performance has worsened considerably. Framerate decreases with the increase of number of units in the game, in the end that I get framerate as images 1 / 3 sec, even low settings.

  The only thing that has changed since the game worked fine, was updated to BIOS to version 2.0. Could it be the cause of the problem? And if so, is it a safe way to downgrade the BIOS to 1.9?

  Thank you.
  Karel

  Hello

  The BIOS update should not affect the performance of the game.
  But after the BIOS update you should definitely take the default settings of the BIOS (by pressing F9 in BIOS). Then save the changes and exit the BIOS.

  In addition, you must check the AMD/ATI settings in the ATI Control Center.
  As I m not wrong no you can increase the performance of the GPU but of course, it would increase GPU s heat dissipation and temperature s notebook would be upward.

• Tecra S1 - problems with the touchpad after update BIOS to 2.50

  Hello
  After the BIOS-update to version 2.5, the touchpad does nothing. From the docking station, the l' option option mouse PS2 works without any problem. Starting late, the touchpad no longer works. Normally - before the update - the touchpad began its work immediately after starting not rooted.
  What can I do to reactivate the touchpad?
  Juvenay clevain

  Hello

  Are you sure that your touchpad was not disabled?

  I mean the FN + F9 key combination to activate and disable the touchpad.

  This is why you should check this first.

  On the other hand a 3rd mouse driver part could affect the functionality of touchpad too.

  In my opinion, you should try to reinstall the driver for the touchpad and test it without connected part 3 mouse.

  Good luck

• Satellite L655 (PSK1JE) - 100% after update BIOS fan speed

  Hello

  Yesterday, I do BIOS update since version 2.10 to 2.20. The update of configuration correctly but the problem is the fan, the speed is 100% all the time.

  others have this problem with this version of bios?

  Can I downgrade to the version of the bios?

  Thank you and waiting for your answers

  Hi kingofcopy,

  Load default settings after updating the BIOS? Go into the BIOS, press the F9 key to load the default values.

  Have you tested the behavior of fan with cooling optimized battery option? In Windows power management, you can define more low fan speed in power management to reduce the activity of the fan.

  Check this box!