My HP Laserjet 1606dn stopped duplex

Similar Questions

• LaserJet 1606dn: LaserJet 1606dn an unknown error has occurred

  My LaserJet 1606dn worked many years. Recently, he just stopped. The toner was low so I replaced the cartridge, but it still does not work. I printed out the Self Test / page Configuration of the device and the status is listed as "an unknown error encountered.

  I tried to print from two different computers, without success.

  What can I do?

  Thank you

  Mark

  Problem solved!

  I discovered that another device on my home network took the IP address that was previously assigned to my printer.  The printer could not connect to the network, and my computer could not connect to it. Once I changed the IP address on the other device, the printer worked again.

  Thank you

  Mark

• LaserJet 1606dn: Attention required - windows 10 - laserjet 1606dn

  I have a Laserjet 1606dn which is connected by Ethernet to my router. I can print to it from an office which is also connected by Ethernet to the router. I try to print from a laptop that is connected wirelessly to the router.  The laptop, I see the page Web server on the printer successfully. |' ve added the printer by using the parameters of Windows 10 / Add a device, and he says he's ready. When I try to print from the laptop, he gets stuck in the print queue and says Attention required without any explanation as to what is needed. I can still print from the office, so I know that the printer has paper and ink and is set up to print. Worry, desktop or portable on Windows 10 - 64 bit.

  The printer has updated the firmware on the HP support site.

  How do I know what attention is needed, or better yet how do I get this printer to print from my laptop?

  Hi @aberdeen61,

  Welcome to the Forums of HP Support! I read your post and see that the printer is not printing, just a computer on the network. Please provide detailed information. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Check to see which port was assigned to the printer.

  Printers and devices, right click on your printer and on the left, click printer properties.

  Click the Ports tab.

  If the printer is selected on the WSD port, try and create a new port by clicking the add a Port. You might have one in the list for TCP/IP for your name of the printer, if you just select and apply the settings.

  We have more than a notch for checking on the Ports tab, uncheck SNMP enabled state.

  

   

  Then click OK and apply.

  Try to print from the laptop.

  If you still encounter problems printing, download and run the print and Scan Doctor, he will diagnose the problem and could solve it automatically.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  Please let me know the results. Good day! Thank you.

• Resolution of printing on HP LaserJet 1606dn on Mac?

  In the Forum:

  I use HP LaserJet 1606dn on an Apple Mac Pro system 10.6.8.  The print driver instructions are source of confusing when trying to set the resolution.  I think that 'Standard' means 600 dpi and "FastRes 1200', 1200 dpi.  Is this correct?  I think that these are the only dpi settings available on the HP 1606dn and there seems to be no option for further settings dpi, 300 dpi or other custom settings.  Am I right about this limitation?

  Clarification on the forum.

  Concerning

  Sternhagen

  Kyle:

  Thanks for the reply and clarification.  He answered my question.

  Concerning

  Sternhagen

• How can I make my LaserJet 1606dn capable ePrint?

  How can I make my HP LaserJet 1606dn capable ePrint? I understand that it may need a firmware update

  Hi traindoctor

  The 1606dn is only able to Airprint. ePrint is not a feature support for this printer. I have a couple about airprint and cloud print below links. Appoligize if you thought that the printer made in charge of the ePrint feature.

  How to use AirPrint on Apple a wireless network:

  http://support.HP.com/us-en/document/c02623193

  Printers supported for Cloud Services:

  http://support.HP.com/us-en/document/c03722645

• LaserJet 3050 stopped printing after last update 1st OCT 14

  LaserJet 3050 stopped printing after last update 1st OCT 14.

  Work status displays "Printing" but watch then "Waiting for printer to become available" and prints ever.

  Tried the usual power out voltage/power on both computers & printer.

  iMac with OS 10.9.5

  Thanks for any help.

  Darrell

  P.S. This thread has been moved to printers - LaserJet Macintosh compatible products. Forum Moderator - HP

  Printer started working today.

  I deleted my printers HP3050, removed cable printer, stop computer and printer.

  restarted printer and computer, reinstalled cable and now the printer works normally.

• HP LaserJet 1606dn: printer LaserJet HP 1606dn stopped printing today

  I printed one document this morning very well. I tried to print a different, and nothing happened, even if when I open the print window, he stated that the task had been completed --100%.

  I tried to manually reinstall the latest printer driver software and received a message that it was successful, but my documents are not always printing.

  The little light on the top panel will blink, indicating that the content is loaded in the printer, but still no result.

  Help, please!

  Thank you

  Susan

  Hi Susan,.

  Restart your router by unpluggin power for a while, and then let him 3 minutes to restart.

  Now, restart the Mac and the printer and try to print again.

  You can see any difference?

• LaserJet P1102w question duplex

  LaserJet P1102w Duplex problem

  Mac OS 10.8.4, USB connection

  suddenly I no longer get the box telling me to "replace the pages in the order" next to 2 pint. It has a few stops printing after 1 side and the interface box tell printer with paper, which is not true, and the icon shows a red! I deleted and readded to the printer, reset the printer system, & run 'fix disk permissions' - nothing changes. What is the solution please?

  You have a HP software in your Applications folder?  If so, uninstall the software using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press on and press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall, it IS the Option of the scrubber, no button is labeled "washer".
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• System tray CP1025nw HP LaserJet has stopped working

  I bought this printer about a month ago and a week ago I started having error

  "HPCP1020SM.exe (64-bit) has stopped working." then click on close and then

  "HP system status bar stopped working." appears click Close. the printer will always print but these mistakes continue to flock to the top whenever I print.  I called HP support, but they have no idea.  Thank you for anyone who can help.

  Hi leutzu_mik,

  Follow the steps below to uninstall and reinstall the printer. If you are unable to get the printer installed on this computer to try to install on another computer and let me know if you encounter the same problems?

  1. open Control Panel

  2. click on uninstall a program

  3 uninstall the Laserjet CP1025 in the list

  4 restart your computer

  5. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  6 download the basic driver, and then reinstall the printer.

  HP LaserJet Basic driver

• LaserJet 4050TN: 4050 duplexer

  I have a LaserJet 4050TN and I'm looking for a Duplexer for her.

  On the web, there are sites that show that the C4123A and C8054A work in the 4050.

  I know that the C8054A is used in the 4100 series.

  My question is the C8054A compatible backwards and work in the 4050TN?

  Thank you

  ---------------------------------------------------------

  I never tried that combination however HP accessories for similar models are often a backward compatibility, but almost never before compatible.

• HP Color LaserJet Pro M252n: HP Color LaserJet Pro M252n duplex automatic does not

  Even if it is set to automatic duplex is not reflect pages...? I have try the uninstall, Setup, reset...
  

  The printer Color LaserJet Pro M252n does not have a double-sided hardware unit, so that you can used perform manual duplex printing (assuming that the printer driver supports this), not the automatic duplex printing.

  The model M252dw has a double-sided hardware unit.

• LaserJet 2100TN off duplex printing

  The window dialog printing in OS X 10.6 Snow Leopard for the LaserJet 2100TN shows the option to print double-sided in gray. So far I have not jet found a way to change this and this permit. Pilot is HP LaserJet 2100 Series version 18.4.

  If someone has solved this before?

  TNX

  Hello

  See double-sided automatic two-sided printing option.

  As your device support manual duplex only, he should see the specific option grayed out.

  To perform manual duplexing, Joanie you use the Pages to the printer setting, you can find below:
  http://support.HP.com/us-en/document/c00294482

  In addition, another alternative is to use the HP two-sided printing software:
  http://FTP.HP.com/pub/softlib/software12/COL35975/MP-88750-2/HP_Two-sided_Printing.dmg
  You can access this tool by clicking the PDF button at the bottom of the print dialog box, and then select double-sided printing and follow the on-screen instructions.

  Kind regards
  Shlomi

• HP LaserJet P4015dn prints duplex manually only

  HP LaserJet P4015dn works properly only when I need a duplex print it of oly manually, how do I change this automatic duplex printing option. My platform is Windows 7.

  Unfortunately, there is no complete drivers for this model, so you can be out of luck for printing double-sided for auto work (I assume you have the installed optional duplex unit).
  Duplexing automatic has already worked, and if so, what operating system did you use at that time here?

  SC Tom

• LaserJet M1217nfw MFP: HP laserjet printer stop printing after the change of internet provider - solution: Reinstall...

  Hello

  my all-in-one HP laserjet has worked on my computer laptop windows 7, via a wifi connection, in the past;

  internet provider has recently changed, and since then, I can't install the printer so that it works continuously.

  After installation initial (via cable between laptop and printer), everything seems fine;

  I select "share with everyone".

  = > everything OK, everything prints, for two users.

  Problem:

  The next time myself or another user trying to print, just a few days later - nothing works anymore.

  NO error message;

  use of the printer is visible in the queue;

  printer is visible (and selected as the default printer) in "devices and printers" with a green check mark, but in light grey, as if idle.

  When (right) by clicking on "help", no error is found... but nothing prints, always.

  How can I avoid to do the reinstall whenever I want to print from my laptop?

  (Printing from my Tablet works great!)

  Would be very grateful for your help... Thanks in advance!

  Hi @KatLe ,

  I see that you have problems printing to different user accounts. I will definitely do my best to help you.

  I have provided a document for the definition of security permissions for printing to see if this will help.

  Can the administrator account on the computer printing, or were they also intermittent problems?

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. Find and fix common printer problems using the tools of diagnosis HP for Windows?

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If you need help, let me know.

  Good day!
  Thank you.

• LaserJet 1606DN: the hp 1606dn backup documents that have been scanned or sent? If so, how can I reteive them?

  I have a HP 1606DN we want to offer to another part of our society. The 1606DN retains / previous Dungeon printed / scanned jobs? If Yes, how do print them and how do I get rid of them in memory?

  The printer will not keep a copy of the scanned document.  Printing is not registered or the other, it would be if anywhere in the queue from your computer if it has not yet been printed.