My HP Photosmart 309 g software does not install

Similar Questions

• Scanning for ScanJet G3110 software does not install

  I downloaded the latest version of the software recommended directly from the HP support site.  Operating system is Win7 64 bit. The Setup program ends in a few moments with no error message, but I don't have desktop shortcut icons. The installation program creates the folder: "C:\Program Files (x 86) \HP\" with two subfolders: 'Temp' and 'Digital Imaging '. Digital imaging files inside I can't find many application files and it is not the application of \bin\hpqkygrp.exe.

  On a pc with windows VISTA and default CD Installer evertything works very well.

  I noticed a lot of missing files from installation, as a common folder. The pc's in a network domain and I launched the configuration in the user domain and domain administrator.

  I tried several times in different days/months/updates to day... Please help.

  Just because the HP scanning software does not work I can not restore my entire system, I can't accept this as a solution.

  I tried System File Checker (0 problems) and to boot, the problem "remains the same" (see Led Zeppelin).

  I finally found a solution, I installed NAPS2, available at sourceforge.net/projects/naps2/ free scanning software.

  Best regards.

• HP M1212NF software does not install or be detected if USB

  My laserjet M1212nf is not found when connected by USB. From the installation disc, it stops at "waiting for you connect the device. However, the printer will print, but it does not install the printing software. I need the software for the printer I need to scan in PDF format.

  I downloaded the drivers, changed the usb cord, so that everything is connected, repaired by the installation CD and rebooted my computer.

  Thanks - Rob

  This thread has been locked, for more information on HPPIW, please refer to the following support document:

  http://support.HP.com/us-en/document/c02681060

  HP printer Installation Wizard is an application of HP support that helped to download printer software. This support request is no longer supported by HP. This software was last updated was September 22, 2015.

  To download and install the latest version of the software for your HP printer, please visit 123.hp.comor HP support Web site, HP Support Assistant (in English).

• SD card reader not working not software does not install

  HP Pavilion G6/1084ss, product no LR011EA #ABE.

  Windows 7 64 bit

  No mistake, try to load the new drivers but does not install.

  Changed the Windows 7 operating system in Spanish to Windows 7 in English.

  SD card reader will not recognize a card when incerted.

  Have you tested the SD card on another PC?

  In the dialog box computer browser My window react OS at all when you put in an SD card?

  Have you tried theprevious versions of the Realtek card reader driver Installer?

  Have you tried reinstalling the driver for the use of the Recovery Manager?

  You can do this with the set of recovery disks or USB recovery media.

  The following image shows the applications, but the drivers are also present in the same dialog.

  

• 7520 photosmart all-in-in-one: software does not install correctly

  I have installed and uninstalled 3 or 4 times. Started and restarted several times. Setup places a shortcut to a program on my desktop. Nothing happens when I click on this shortcut. The printer will print and scan to computer works. What kind of program the shortcut is pointing to and how to operate / or do I need?

  BTW the shortcut in the start menu that points to the same program does not work.

  Hello

  Solution follow below to install the hotfix, and then double-click the HP Photosmart 7520 icon and check differences:

  http://support.HP.com/us-en/document/c03640384

  Kind regards

  Shlomi

• HP Photosmart c3180: printer software did not install

  Hello

  I recently upgraded my PC and installed a new motherboard. Now, I've had my C3180 printer for 5 years now, whenever I have installed the printer software, I have had no problem on one of my computers. The software in question is the HP all in one series to my printer.

  Now here's the problem, after setting up my new PC, I'm trying to install the printer drivers to use the scan etc. The error is the software constantly gives it's when I try to install: cannot find USB drivers and a USB device "this computer has no support USB available for this installation. I tried the program several times and he refuses to install.

  Well, here's the catch, I installed all my USB motherboard etc drivers correctly and they all work. All my USB devices, keyboard, webcam, headset all work. Now on windows 7 64-bit devices and printers, the printer is actually shown and active. I even printed the windows program help and it prints that I need to fine.

  In Device Manager in the USB printer section he calls here HP Photosmart 3100 is active and has no problem at all.

  This is why I can only conclude this is the stupid software refused to install because it can not detect my USB drivers even if my USBs are working very well and I can even print the printer to start! My new motherboard is an Asus Maximum hero 8 with all the latest drivers to installed

  Thanks for all the suggestions that I really need to use the printer to scan using the HP software

  

  Hello

  (1) run the executable (i.e. AIO_CDA_NonNet_Full_Win_WW_130_140.exe) HP installation package
  2) open Windows Explorer and type % temp % in the address bar, and then press ENTER.

  3) navigate to the extracted installation folder, it will start by 7z (e.g. 7z1234S)
  Note: If there are several of these files to find the most recent sort by "Date Modified".
  4) go to the "Setup" subdirectory in this 7z folder.
  (5) move, delete or rename the usbready.exe file which is the Intel USB System Check utility.
  6) navigate the directory tree in the 7z folder and double-click the installation executable (Setup.exe)

  You can see any difference now?

• Pavilion laptop - 15-ab262nr: HP 3D DriveGuard and Coolsense software does not install

  Reinstalled Windows 10 on this PC laptop shortly after purchase (clean install to remove all the bloating) and

  Software HP Coolsense and DriveGuard will not install. After having downloaded DriveGuard and try to run the installer, nothing happens, so I go to the list of programs and see here but it is grayed out. Tried the latest version 6.0.28.1 Rev.A. When you try to install Coolsense I get an error message that the software of .net framework must be installed, but it is already part of Windows 10.

  Anything can happen on the ideas?

  Thank you!

  Hello

  CoolSense requires .NET Framework 3.5, which can be present on a new installation of Windows 10 - you can check it as follows.

  Hold down the Windows key and press R.

  In the run box, type appwiz.cpl , and then press ENTER.

  In the left pane, select "Windows turn features on or off" and let the list populate.

  If .NET Framework 3.5 (included .NET 2.0 and 3.0) is not selected, add a check mark, and then click Ok.

  Once installation is complete, restart the computer, let Windows take over completely for a few minutes, and then try to re-run the installer to CoolSense.

  As far as HP 3D DriveGuard is concerned, you could try the following.

  Hold down the Windows key and press R.

  In the run box, type appwiz.cpl , and then press ENTER.

  Make a right click the entry for HP 3D DriveGuard and choose uninstall.

  Once complete, download and reinstall the Chipset driver below.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72862.exe

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Yet, once it finished, reboot the laptop and let Windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• Win 16 subsystem software does not install it.

  NEW SOFTWARE ARE NOT INSTALLATION (win may be unstable 16 press ok to finish or cancle subsystem to run.)

  Original title: NEW SOFTWARE ARE NOT INSTALLATION

  Hi satabhisham,

  · What are the names of the programs?

  · These programs are designed for 16-bit Windows computers?

  You can try the steps in the link below and check off the results: error message when you install or start an MS-DOS-based program or 16 - bit Windows based: http://support.microsoft.com/kb/324767

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Laptop HP 15 - r 226cy: software does not install.

  Hi, iam using Notepad windows 10 and tries to install software called, Realtek RTL8188EE wireless adapter 802.11bgn several times with the HP Support and without it, even though the message says installation complete, wireless it never happens.when I check control panel for installation of it, he's not here. can someone help, thanks.

  Spoiler (Highlight to read)

   

   

  Hello

  It seems that you upgraded your Windows 8.1 machine to Windows 10. Have what part of the control panel you checked? You will have to perhaps download and install first the following drvers, then restart machine

  Driver and Intel Chipset Installation utility

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69575.exe

  Intel Management Engine Interface (MEI) driver

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69592.exe

  After that please download and install Realtek RTL8723BE/RTL8188EE 802.11b/g/n Wireless LAN Drivers:

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72517.exe

  Kind regards.

• Multifunction color LaserJetCM2320nf: complete solution for HP LasterJet CM2320nf MFP Color scanning software does not install

  I can't reinstall the complete solution to scan for my Color HP LasterJet CM2320nf MFP print/software. He complains about the USB drivers and a USB device. "This computer has no USB software necessary support to allow for the completion of an installation of the USB."

  I suspect that my laptop is too recent. He works exclusively off the coast of USB 3.0 ports, which caused problems with installation programs that flow from readers reading and USB external hard drives.

  It is a Dell Precision 7510. The software I use (obtained from HP support) to run very well on my laptop more elderly, with the same OS (Windows 7).

  I've updated all my drivers from the Dell website. Windows is up to date and was able to install the necessary print drivers. So at least I can do. But I would like to be able to analyze as well.

  My Device Manager is clean (no exclamation points), and he has installed it (for Windows) the following:

  HP EWS UPD

  HP Fax PNP Null

  Intel (r) USB 3.0 Host Controller eXtnesible

  Intel(r) hub USB 3.0

  Composite USB device

  USB print media

  All popular resolution. Thank you.

  Hello

  Download and run the latest form of software the HP Site:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3597359&swItemId=tw_77183_2&swEnvOid=4063

  Once the installation to the Welcome screen appears, click CTRL + SHIFT + ESC, the Task Manager opens.

  On the Applications tab locate the HP Installation, right-click and select go to process.

  Then right-click illustrated process, in menu click right to select the location of the open file, installation source opens.

  Open the installation folder, locate the file named USBReady.exe and rename it or delete it.

  Note: If you can't find it in the installation folder, look for usbready.exe in the main installation folder and edit the file.

  Once the file has been renamed or deleted, click install and follow the installation, then check all difference.

  Shlomi

• HP Scanjet g4050 software does not install under Windows 7 ultimate

  Hello

  During the installation of the complete software, the scan.msi file is "not found", even though it is present in the directory.

  What is the problem with this file?  Tried installing several times

  Installation file: setup_full_G4050_14 - 5.exe, downloaded from the HP support site

  Name of the operating system: Microsoft Windows 7 Ultimate
  Version: 6.1.7600 Build 7600

  concerning

  AB

  Try to run the program to uninstall and install the troubleshooting utilityfrom Microsoft. Post your results here if you please. Here is a link to the web page from Microsoft that explains the function of the troubleshooter.

  You can also download the complete package via an FTP interface.

  Best regards

  ERICO

• BlackBerry Smartphones Blackberry Desktop Software does not install

  I just got a Blackberry Tour from Verizon. I am trying to install the Blackberry Desktop Software. I insert the CD and all I get is a window (sort of background grey) with the label user Blackberry tools and nothing happens. I get the same results on my XP and Vista PC.

  I downloaded 5.0 from Verizon and installed.

  Thank you

• Photosmart D110 series scanner does not. Printer and copier functions work

  my HP photosmart series D110 scanner does not. Functions of the printer and copier are working.

  I downloaded and installed the latest upgrades to OS Maverick.  Any suggestions?

  Hi @B4inSF

  I can help you to scan to your Mac running 10.9.3.

  There is no full feature software and driver of HP, but the pilot of Mavericks v10.9 OS X for your printer is available through Apple Software Update (ASU).

  With this driver, you can still print and scan, you'll just have to scan from HP software. Scan to the computer from the printer control panel is available only when you use the HP scanning software, so it won't work because there is no scanning software HP as part of the Apple Software Update driver.

  Instead, you can scan using,

  • Method: scan from the print window & scanning

• Software does not open after installation on Windows 7

  I have a Photosmart 6280 all in one and once the software is installed, the program will not open. Was on the phone with a guy from HP for an hour and he couldn't help. Time to work with Win 7. Anyone has any ideas. Done an uninstall and still does not. I like Win 7, but sure would like to get my printer working.

  Have you tried to install the latest drivers for Windows 7 and the software from the following link for your printer?

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=4062&LC=en&DLC=en&cc=us&lang=en&product=3194498

  In addition, when you mention that the software does not open, do you mean the HP Solution Center software?

  -------------------------------------------------------------------------------

  I work with HP, but these comments are my own and not from HP

• my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  He ran once before, one of my suggestions of solution was the coil (?)  was incorrectly, but don't know how to adjust it

  Hello
  (1) have you made changes before the start of this issue?
  (2) what is the exact error message/code?
  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

  To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  a. click the Start button, Control Panel, click System and Maintenance and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Additional reference:
  Open printer troubleshooter.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Let us know if that helps.