my hp printer, scaner.fix. My scanner does not look at my computer

Similar Questions

• Epson Perfection 2450 photo scanner does not work on Vista computer.

  I used the driver for my scanner Epson Perfection 2450 of photo on Windows XP service pack 2 and 3.  the driver is Epson 12242.  It does work on the Windows Vista-based computer.  I've done the troubleshooting through windows without success. Anyone found a solution for this one?

  Hello

  1. do you have a 32-bit version or a 64-bit version of Vista? : http://support.microsoft.com/kb/827218

  2. this photo scanner worked fine with Vista sooner?

  You can try to run the program in compatibility mode and check.

  Please see these articles for more information: http://windows.microsoft.com/en-US/windows-vista/What-is-program-compatibility

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  As per Microsoft website this photo scanner is not compatible with 64 bit version: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Epson%20Perfection%202450%20Photo%20Scanner&v=Epson&uid=B11B149011&l=en-US&pf=0&pi=0&s=Epson%20Perfection%202450%20photo%20scanner%20&os=64-bit

  I hope this helps.

• HP Envy 7640: HP Envy 7640 Scanner does not work.

  I got a new printer HP Envy 7640. Prints beautifully, but the scanner does not work. I can not make copies, I can't scan something and send it by e-mail or save it in my flash drive, and of course I can't print with my hp pc. I followed the instructions I found in the doctor but it does not work either. I followed the instructions I found on this forum and it does not work either. What can I do?

  I had to go back, because the scanner came broken from the factory. Then they gave me another printer and has so far been working well. Thank you.

• Scanner does not work on HP Officejet 6500 Wireless with MacBook Pro

  I have the all-in-one Officejet 6500 wireless and print fine but the scanner does not work even after the implementation of suggestions on the Web site.  I recently installed Mac OS x 10.6.8 but I had the same problem with the previous software.  Scan worked fine until the last few months.  I get the message that "HP Scan Pro quit unexpectedly" or "Sorry, an unknown error has occurred", but no additional information.  I have re-installed the software HP twice but to no avail.  What can I do?

  Try the scan using the Image Capture in your Applications folder.  Click your scanner on the left side, click "Show details" on the bottom.

• Windows Fax and Scan for Windows Vista does not appear under all programs

  Windows Fax and Scan for Windows Vista does not appear on my computer under all programs - where he might or he is still in charge?

  If you have Vista Home Basic and Vista Home Premium, they do not come with Fax software included.

  You will need software 3rd party Fax:

  http://www.SnapFiles.com/reviews/Snappy_Fax_2000/snappyfax.html

  Snappy Fax 2000 allows you to send and receive faxes from your computer. You can use your scanner to scan documents and then sent a fax to any fax machine, or use the print command other applications to use the virtual fax printer, allowing you to send faxes directly from most Windows applications. In addition, the program also supports faxes sending via the internet, filtering of unwanted faxes and transfer incoming faxes to other fax or e-mail addresses. Additional features include import address book, faxes by email (with zip for images support), OCR, spell checking and much more.

  See you soon. Mick Murphy - Microsoft partner

• Photosmart D110 series scanner does not. Printer and copier functions work

  my HP photosmart series D110 scanner does not. Functions of the printer and copier are working.

  I downloaded and installed the latest upgrades to OS Maverick.  Any suggestions?

  Hi @B4inSF

  I can help you to scan to your Mac running 10.9.3.

  There is no full feature software and driver of HP, but the pilot of Mavericks v10.9 OS X for your printer is available through Apple Software Update (ASU).

  With this driver, you can still print and scan, you'll just have to scan from HP software. Scan to the computer from the printer control panel is available only when you use the HP scanning software, so it won't work because there is no scanning software HP as part of the Apple Software Update driver.

  Instead, you can scan using,

  • Method: scan from the print window & scanning

• I'm scanning in legal size docs. with my printer/scan/fax. The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.

  I have a new HP with Windows 7.  I'm scanning in legal size docs. with my printer/scan/fax.  The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.  I could do this on my old XP computer.  Microsoft forgot add parameters of legal size in this application?

  Hello notnewbee,

  Thanks for posting on the Microsoft answers Forum.

  You do not give the model of your printer/scanner/fax machine so I can't direct you to the website of the manufacturer of specifc. However, I would
  you go to the website of the manufacturer of your printer and download the latest drivers for Windows 7. Sometimes, if you use a driver that is not intended for your operating system, then your device can operate and install, but some features may not work.

  If they do not have an updated driver, then try the compatibility mode for Windows XP and see if your printer will work correctly.
  The information below will show you how you can make older programs run on Windows 7 here.

  If please reply back and let us know if this helps solve your problem or if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Canon mp530 printer/scanner does not work since the latest version of windows update

  from the windows of the last update my printer scanner does not work. He says I have no installed printer. even if its there in my device list. Ive spoke at length with Canon support and they are sure it's a matter of windows.

  any ideas?

  Hello

  After windows update did you check in Device Manager is there any yellow mark on any driver?

  Go to the device by right clicking on computer Manager and manage

  Right click on the yellow camera brand > properties > details > click on description of the device > select hardware ID

  Let windows to be opened and take note of the VEN ID and DEV ID

  Go to the browser and go to Pcidatabase and put the VEN ID and see who exactly the driver required

  Look for the driver at Google or bing or other for a good

• Scanner does not work for all users on the computer Windows 7

  Photosmart 7510 Scanner does not work.  My scanner has the habit of work.   Now it does not for one of the three users on my Windows 7 desktop.

  I spent over 3 hours on the phone with HP.   They had me restart the computer, Plug and unplug the printer, reinstall the software twice under different names. The software depending on what user id, it is installed under allows access to the scanner/printer to one or more users.  The scanner works with Windows Paint software for all three nicknames.

  HP response is that some user control prevents the scanner software, who used to work on all three nicknames on the computer, which now works on one or more of the users.  They couldn't tell me which user control need changing.

  The HP solution is to restore my system when I could scan for all users of three.   I don't want to do that.   Does anyone have a better solution?

  The real problem is HP error messages.   When I click on scan a document, there is no answer.  Nothing happened.

  Then I tried to scan using Windows Fax and Scan.   I got an error message which helped me locate the source of the error.   I was able to fix the problem without creating a new user account.  I had deleted bu error the file MY Document.   Restore this file fixes the problem.

• Canon iR4750 with OS X10.11.4 scanner does not work

  trying to get my Canon iR4570 multifunction copier to work as a scanner.  I installed print drivers (UFRII) and it works like a full service printer but the scanner does not appear.

  Any suggestions?

  Have you tried scanning with picture Capture in your Utilities folder?

• Office jet 6500 a Plus: Office jet 6500 Scanner does not work on iMac

  I have a printer, scanner, fax Officejet 6500.  Before the update of my modem, printing and scanning wireless worked perfect.  After a new modem only the printer works.  Bought a USB cable to connect to iMac running OS - El Capitan.  Printer works fine but the scanner does not work.  I uninstalled HP applications, printer deleted from system preferences.  Restart the computer.  Reinstalled with the latest drivers and add printer in system preferences.  Printer works fine but still no scan.  During the call to the top of the scanner/printer in system preferences, I see two options, one for print and other to analyze.  Queue only appears.  Any suggestion would be appreciated.

  Hey @Tg2020,

  Welcome to the Forums of HP Support!

  I see that you are not able to scan from your Officejet 6500 a Plus e-All-In-One to your computer Mac OSX 10.11. I can help you with that.

  To resolve this issue:

  1. Unplug the USB cable from the printer.
  2. Click on your Apple icon, system preferences and printers and Scanners.
  3. Hold down the CTRL key and click on the image to your printer on the left side.
  4. Click on reset printing system.
  5. Click on the button "+" in the corner.
  6. Select your printer from the list.
  7. Click in the box next to and select your printer.
  8. Click on Add.

  At this point, you should be able to scan your printer wireless. If you are unable to do so, please let me know what happened following my directions and I should be able to help more.

  If it solves your problem, please let me know by clicking on accept Solution below my post. Also let me know if you have any other questions. If not, have a great day!

• DeskJet 2050 A scanner does not work

  I have windows 7 and have installed my all-in-one deskjet 2050A. My printer and copy works fine. My scanner does not work. HP scan does not work. Scan of Windows, irfanview will not work. I can see my scanner in the Device Manager. All the drivers are up to date. I have uninstalled and installed the HP software several times. The diagnosis of HP twain scanning utility, said component does not work correctly. I tried all suggestions please help...

  I don't know if your solution works.  My problem was that the drivers WIA, well installed, could not.  Once activated, everything works fine.

• HP C5230: Scanner does not see memory cards

  I have a HP C5230 scanner, copier, printer.   It worked fine, but suddenly, it no longer reads any type of memory card.  Unfortunately, you have the scan to a memory card, so now the scanner does not work.  Anyone have any ideas?   It's like memory card ports are dead.

  Hi @niklasmama,

  Here are the directions to make a scan from the printer to a computer I found in the HP Photosmart C5200 User Guide.

  

  If the scan from the printer to the computer is not working properly, there is a problem with the drivers and the printer software.

  What operating system your computer is running?

  I'll watch for your reply, so I can help you further. Just reply to your convenience.

  Thank you!

• HP Officejet 6700 Scanner does not appear in Win 10 Aps

  Installed Win 10. Had to uninstall and reinstall HP 6700 JO to get scanner to work. Howecer, scanner does not appear in all Aps (Start menu). The only way I found to scan is to right click on the HP Officejet 6700, and then click Run as administrator. Which takes me to the HP printer Assistant I can open the scan dialog box.

  How to scan to show in all the Aps?

  Thank you

  Hi @SideSaddle

  have you tried this

  Navigate to C:\Program Files (x 86) \HP\HP Officejet 6700\bin

  Right click on hpscan.exe and click on "Pin to Start", now you should be able to run the scan directly.

  hope this helps

  Balance of payments

  Although I am an employee of HP, I speak for myself and not for HP.
  Say 'Thank you' by clicking the 'Thumbs Up' in the post helped you.
  Please indicate the position that solved your problem as "acceptable Solution".

• HP 8500 A909g scanner does not work

  Recently my HP 8500 A909g scanner does not work.  I did not change my system.  I use Windows 7.  When I click on scan in the HP Solution Center, I get the message that the HP imaging device is not found.  Several solutions are listed I tried each of them several times.  I even uninstalled my all-in-one, downloaded the new HP software and re-installed.  The extended error message is 8, [(1.0,-2147221502)].  I'm addicted to the HP 8500 A909g wireless. Printing works fine, it will be not just scan and I desperately need to scan several documents.  Any help is greatly appreciated.

  Hello

  Thank you for reporting the issue. There are several ways you can scan from the printer

  1. ensure that you have downloaded latest software HP and installed it.

  2 to PC, launch HP printer application (start-> program files - HP-> model-> printer model Hp series) or the center of solution and double click on the scan link to do the analysis

  OR
  3. a third of applications like paint program, click on file and choose Insert the image from a scanner.

  4. If it is connected to the network, then you can use your browser to scan, here is the video

  http://www.YouTube.com/watch?feature=player_embedded&v=HbWpgww5I-M

  If one of the above option does not work, then download the application print and scan of doctor and run it.

  Here's the site: http://ftp.hp.com/pub/softlib/software12/COL50849/mp-126353-1/HPPSdr.exe

  Good impression