my laptop lost its screen!

Similar Questions

• The screen of my Sony Vaio laptop VPCS11FM completely lost its brightness after the installation of Windows 8. What should do?

  I installed upgrading W7 W8. Already during the final phase of installation, the screen of my Sony Vaio laptop VPCS11FM completely lost its brightness after the installation of Windows 8. I tried the settings of brightness through the hardware buttons and in energy savings, but it remained the same. What should do? Karl

  Looking for a display updated sony driver.   Its always a good idea to do so during the updating of the OSs.

• How can I change my laptop and my screen be displayed in Portrait rather than landscape? (in other words, I want to turn my laptop on its side to display more information by page)

  How can I change my laptop and my screen be displayed in Portrait rather than landscape? (in other words, I want to turn my laptop on its side to display more information by page)

  Vista running on a Toshiba Satellite L500

  Hello

  Try to press Ctrl + Alt + up ARROW, or try Ctrl + Alt + and a different key to the arrow.

  If this does not work: right-click on empty office rotation - graphics options.

• my laptop has lost its sound!

  I don't know why my windows xp has lost its sound, I go into the volume control and none of this is highlighted so here before, I can't change the settings please help

  Hi nicoladowler,
   
  -Have you done recent changes made to your computer after this problem started to happen?
   

  Follow the three steps solution given in the link below and see if it helps you fix the problem:

  No sound in Windows

• My laptop loses its STARTUP information after it was closed during the night

  original title: STUMPER! My laptop loses its STARTUP information after it was closed during the night?

  I have a problem very intrigueing that I can't understand. I can do a clean install of Vista Ultimate(32 or 64 bit), on my gateway M285 - E Tablet PC. Once it's done and I did not yet updates, if I stop the system at night, I wake up and you try to boot the system and get a blue screen (which finally tells me that my "disk.sys" file is missing. I tried plugging it down in increments to see when this file, in fact, is lost. I stopped for about 1 1/2 hours and it will start fine, but during the night, it won't.

  Then I tried a fresh install and did all the updates available, same thing. I tried to start a "memory test and everything is fine." I even did the memory more intense test (which takes forever, by the way... lol). I also did "chkdsk", as well as all viruses and malware, etc. tests with Norton first Edition.

  I got to the point where I now have 3 separate "disk images" that I created to save time in my software I want to use this system of loading. We're just a clean install, that no update, other clean install available updates. and the last with a clean install with all my software MS Office, Adobe Creative Suite and Autodesk Entertainment and all of their updates.

  I did this for if I'll actually somehow solve this problem I can easily use the "disk image" I want... No...

  Oh yes, I also all my drivers up to date etc.

  Any help on this issue would be greatly appreciated.

  EDIT:

  Another problem related to this situation, it's the hard drive becomes undetectable, so I have to use a software such as Ubunta starting vehicle, which has its own operating system, so I can actually format my hard drive to start the installation process. (otherwise my Vista installation won the same recognize I have a hard drive, not to mention operating system to try to resolve, such as startup repair, System Restore, etc.)

  I finally figured it... xD is a hard drive diver who has been desgned for WinXP and for some reason any were never changed during the installation of Vista on this system or automatic updates.

  It was actually the IDE ATA/ATAPI controllers, specifically the Intel SATA AHCI Controller. I used "Driver Whiz/Detective", which would install most drivers via a base file system are integrated.

  The controller AHCI SATA Intel(r) has not, it only downloaded a .zip file that contains the following files:

  IaStor.sys
  iaAHCI.cat
  iaAHCI.inf

  These were to actually be manually installed. "Even if I had downloaded and extracted the files, when I tried to update the driver"Intel SATA AHCI controller"via Device Manager" through the command of newer driver search. It does not always detect it them, stating that I already had the best and latest drivers already installed.

  Then, for some reason that just kept on bothering me, because "Driver Whiz/Detective kept indicating that it was the best version of the driver for my system.

  So, I finally tried to update the drivers manually by specifying exactly where these files are located on my system. Then he finally recognized them and installed them.

  According to me, given that this system is an older model 'Gateway M285-E Tablet PC', even if it is Vista compatible, he has always maintained the operating system higher available for WinXP, through any auto detect in the BIOS. Even in the settings of the BIOS OS I tried assigning 'Other', because the only other options were Win95, Win98, WinMe, Win2000 and WinXP.

  So having not the 'Intel(r) SATA AHCI controller"recognizing a Vista OS after be closed for a period of time, it would try to load a Windows XP operating system, and have failed to do. Strange, but is the only explanation I can offer for her.

  Thanks for the help,

  Wayne

• Photosmart 7520: Photosmart 7520 has lost its wireless connection

  Our photosmart 7520 used to print beautifully two laptops, but today it stopped printing at all and seems to have lost its connection to the internet.

  I tried to remove it from my system preferences, to reset, and when I tried to add it, it was no longer on the list of available printers.

  Hello @cornylouise!

  Thanks for posting on the HP Forums!

  I would be happy to provide you with assistance on the Photosmart 7520 and the problem of communication between 2 laptops.  If the printer is no longer being found by computers, then you can by looking at a slight problem of Wi - Fi.  The first thing I would suggest is the cycle of power cables to the printer and the router by unplugging the power for 20 seconds.  Once the devices back on then see if you can add the printer to laptop computers.

  If you are unable to find the printer then I suggest to restore the default settings of network on the printer and it reconnect to the wireless network.

  To restore the default settings of the network printer:

  1. To press the Wi - Fi icon at the top of the touch screen to printer
  2. Tap Settings
  3. Tap on restore default network settings and confirm

  To run the Wireless Setup Wizard:

  1. Icon press the Wi - Fi at the top left of the screen touchscreen printer
  2. Tap Settings
  3. Press wireless configuration wizard
  4. Select your network
  5. Enter the password and confirm it
  6. Check if the computer can find the printer again

  If please, after back and let me know how it goes!

• I would like to revive my laptop to its factory settings, but I don't have the cd that came with it. is it possible to do this if my laptop?

  I would like to revive my laptop to its factory settings, but I don't have the cd that came with it. is it possible to do this if my laptop?

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• My sisters thinkpad XP pro is unstable and it has lost its drive. I can reinstall using my xp pro disk and its product key?

  My sisters thinkpad XP pro is unstable and it has lost its drive.  I can reinstall using my xp pro disk and its product key?

  I fixed it!

  I couldn't work at all Internet Explore.  I finally installed Superantispyware from a USB pendrive and it ran in safe mode without network.  So I ran Malwarebytes and ccleaner.  After a reboot, everything works great again.  I could install Microsoft Security Essentials and get current updates.  After a smart defrag it turns really well now.

  I was able to make a recovery cd set too.  It will be just as good as if I he burned them on a new computer?  I mean can the data used to make these CDs get corrupted over time?  This laptop is 6 years old.

  Thank you for your willingness to help.

  MJ

• I restored my laptop to its factory settings, but now it's slower that ever - why is this?

  I have a Dell Inspiron 1545 Windows Vista Home Premium Service Pack 2.

  It started 2 weeks ago - I had the legendary 'Black Screen of Death"and advises him to restore my laptop to its factory settings (all my documents etc are saved on an external hard drive). After the restoration, this is when the problems started. My computer is very slow. I know that's not the internet, I tried my sister's cell phone and the internet works fine.

  scanning using the preforms

  http://www.Malwarebytes.org/

  http://www.systweak.com/AntiSpyware/

  http://www.free-AV.com/en/download/index.html

  or Avast

  Make sure your system is clean first. use ccleaner to get rid of junkfiles http://www.piriform.com/ccleaner/download

  preform disk cleanup and defragmentation in order to improve the performance of your system.

  do not use unistall programs u.

  Make sure your windows is uptodate and drivers work correctly and that they are as uptodate.

  Use http://www.javacoolsoftware.com/spywareblaster.html to protect your pc against spyware, adware etc and keep it uptodate then use firefox as your browser

  only use the block announcement more, no script and WOT for safer web browsing for firefox.

  go to msconfig (type in the search box in startmenu then press enter) then prepare your computer to clean boot by disabling all startup items and any of the services of windows, and then restart your computer. See if it makes a difference? If she did then you should know which ones caused to slow down your pc.

  minimize your startup programs hollow msconfig (type in there search box in Start menu, and then press enter)

  try to check your drive for errors and also run the SFC (sfc) system through cmd (run cmd as administrator, and then type sfc/scannow)

• When do wind 10 install lost 2nd screen, screenshot of pc how to recover the use of pc now

  I had no problem getting windows 10 softwear suddenly when finished and needed cleaning to continue, well was shocked operating only lcd screen exploded signal dark and thought was a function key on the pc to 2 screen, pc or external only one, which missed too - in fact when the pc fell to lose its screen I managed to retrieve external display used by beat keyboard , Well, it worked once, good now only use tried was thinking volt battery drain low source flip some wells internal adjustment other than having perhaps a mouse operation pc double same time so know where the icons are on a screen display or removal of the drive for a player of the player id rather get a fix that allows using pc busted as he went a while until downloading He messed, got together 500 filled concerts and spent $ 10 for that data too, save me a trip pc shop please

  Hello Edward,.

  Thanks for posting your query on the Microsoft Community.

  If you encounter a problem with dual screen and you have lost your second screen when installing Windows 10 then first of all I suggest you to install all the updates of Windows available. Then try to update all device drivers, and see the article mentioned below to add multiple monitors.

  How to: install and update drivers in Windows 10

  If the problem persists, then install the drivers for Windows 8/8.1 from the site of the constructor in compatibility mode and check if it works.

  Make the programs more compatible with this version of Windows
  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  Reference:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab5&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  More information: You can also refer to the article mentioned below and see if it helps.

  Plug a second monitor or projector

  Note: Article 8.1 of Windows but not be too good for Windows 10.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• I bought an iPhone 6s and more in the United States, now its screen is broken, I live in China, personal APPLE let me come back to the United States for maintenance!  So ridiculous, help! Thank you!

  I bought an iPhone 6s and more in the United States, now its screen is broken, I live in China, personal APPLE let me come back to the United States for maintenance!  So ridiculous, help! Thank you!

  the iPhone may be served only in the country where it was purchased. Nothing strange in this situation. You can ask your friends or relatives in US to take your device at the Apple Store it.

• Sometime this week, my MacBook Pro has lost its sound. I can't listen to anything that has the sound of iTunes for video clips. It is no longer a Volume icon (speaker w / lines of radiation) on my Menu bar

  Sometime this week, my MacBook Pro has lost its sound. I can't listen to anything that has the sound of iTunes for video clips. It is no longer a Volume icon (speaker w / lines of radiation) on my Menu bar. My MacBook Pro is a mid-2012, 2.3 GHz Intel Core i7 Memory 16 GB 1600 MHz DDR3 OS X Version Yosemite 10.10.5

  Graphics Intel HD 4000. Can anyone help?

  Thank you very much!

  Thai-Anh

  Reset NVRAM may solve it.

  How to reset the NVRAM on your Mac - Apple Support

  Or system preferences > sound, check on 'Volume to see the menu bar' to show the volume of the sound in the menu bar.

• My laptop lost wireless connection after hibernation I or stop it. Then I have to reset the automatic Wireless Configuration to find my wireless connection

  I just bought a new NetGear wireless router and now my laptop lost wireless connection after hibernation I or stop it.  Then I have to reset the automatic Wireless Configuration to find my wireless connection.  Whenever I stopped him it and I have to choose.  This does not happen on another laptop or desktop that I have.  Is there a safe solution for this?

  Hi Ron,

  1 Windows operating system you are using?

  2. you receive messages or error codes?

  You can read the following article and check.

  Windows wireless and wired network connection problems

  If you use Windows XP, then read the following article:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  This problem can also occur when the power management profile turns off your network card.

  You can try the following steps and check if it helps.

  a. click Start, type device manager in start search and press ENTER.

  (b) in Device Manager, expand network adapter.

  c. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  d. go to the power management tab.

  e. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  f. If you have disabled the boxes, click ok and restart your system. Put the computer in Hibernate mode and check if you still have any questions.

• If I buy and install Windows 7 Home premium is automatically change my laptop a touchscreen screen or do I need to get a screen special hardwear?

  If I buy and install Windows 7 Home premium is automatically change my laptop a touchscreen screen or do I need to get a screen special hardwear?

  monitor you need to buy a touch screen, win7 it turn not into one!

• Windows cannot connect to the printer. The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.

  A Windows Server 2003 Standard Edition SP2 32-bit computer is a field, the file and print server.

  A computer on the domain is a machine of Windows 7 Ultimate 64 - bit with HP DesignJet 500 24 printer connected via USB.  The printer is running the latest firmware.  The PC is running the latest 64-bit drivers with no problems to the host machine printing.  The host also has the latest drivers 32-bit (x 86) installed by downloading by other computers on the network.  The printer is configured to share with the share name of HPDJ500.

  Now, on a machine Windows XP Pro SP3 32 bit on the field, I'm trying to connect to the shared printer.  Add a printer > click Next in the wizard of > check "a network printer or a printer attached to another computer" and then click Next > click on "Find a printer in the directory", then click Next > click Find now > HPDJ500 in the list below (the XP machine can see the shared printer on the Windows 7 computer!) and click OK.  At this point, I get an error that says: "Windows cannot connect to the printer.  The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.  For more information, click Help. »

  Alternatively, if I right-click on the HPDJ500 printer listed, then click on connect, I get the same error message but I also see a separate window that says "Connecting to HPDJ500 on H2.ws.net" with the lively projector.  This window also disappears as soon as I clear the error message.

  Please note that this printer worked perfectly as a printer shared, hosted on a machine XP 32 bit on the field.  It works perfectly for the new Windows 7 64-bit machine, but we cannot connect from anywhere else on the network (including the server which translates the same exact error message).  On the server, I also preinstalled drivers thinking there was a problem with a 32-bit computer, trying to grasp the correct drivers from the host 64-bit Windows 7, but that doesn't change anything.

  How connect to this printer?

  Try using the path UNC path of the printer in the Add Printer Wizard.

  Add a printer > network printer > connection to this printer ((deuxieme point)

  Click next to browse (leave blank, the name field) or type the UNC path of the printer (i.e. \\Computername\Printername) path