my laptop not boot to windows

Similar Questions

• Pavilion 15 laptop: HP Pavilion 15 computer PC2170 laptop does not boot to Windows - 2 years

  Hi, my Hp Pavilion is only 2 years and 2 months (not very old at all) but suddenly it does not start in Windows, it hangs at the HP logo screen, it starts with an HP logo screen then goes to another screen of the HP logo, and then freezes. I can't get into safe mode.  I got in the Hp diagnostic screens and I conducted tests on all and everything.

  I did a hard reset, still frozen.

  I removed the cover, he went out and placed him in, still nothing.

  Whenever I have to try and reset it, he said administrative privileges is necessary, but there is no administrative privileges on this computer.

  There is no restore point.

  I ran chkdsk via the command prompt and had no error.

  I tried running sfc: scannow but I had which was something in the meantime and could not do.

  The laptop is: laptop HP Pavilion 15 2170

  A6-5200 APU AMD processor

  Can someone computer whizz out there enlighten us on this you problem, please.

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Computer turns on but does not boot to Windows, startup repair does not work

  When I turn on my laptop, it brings me to a screen titled "Windows Error Recovery" which means the following:

  "Windows did not start.  A recent hardware or software change might be the cause. »

  He asks me if I want to '(recommended) launch Startup Repair' or 'Start Windows normally'.

  When I select repair system, the screen turns off for half a second only and brings back me to the exact page as I was already on.

  When I select "Start Windows normally", he brings me to the loading screen that usually starts with Vista (anyone who says (c) Microsoft Corporation), except that it never stops loading.  I left for hours, and he was still on the same screen.

  I have a laptop Dell Inspiron 1525 with a processor Intel Core 2 Duo and Windows Vista Basic.

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• System does not boot into Windows when a USB is installed

  It's strange.  I just installed Windows 7 Home Premium Upgrade (64-bit) of a previous Vista machine.  Has made the choice of 'Upgrade '.  Now that it is finally installed and get some of the bugs resolved, a question I still have is when a (key, post HD) USB device is installed in the machine and I run a reboot or extinguished/turned on, the system starts to boot, runs through the BIOS section, but just before trying to start Windows I get a fast blinking cursor in the upper left of my screen.  If I remove all the devices usb between PC and manually must shut down and restart it restarts in Windows very well.  What is the problem?

  Desktop HP M9350F model; 64-bit; BIOS Rev 5,29 (28/04/09); BIOS Boot Priority: floppy, CD, HD, network (note: there is no other choice shown/available USB?)

  Maybe someone else has had this problem and an easy fix is avaiable.  Thank you!

  CD,

  Well believe it or not, I realized the problem.  Not the BIOS.

  One program, I have installed is SecureDoc WinMagic.  It's encryption software, although my drive has (yet) been encrypted.  In fact I had contacted the Lim before this same thread started to think it might be because of that, but he told me it was probably my BIOS and nothing to do with their SW.

  However, last night I decided to remove their SW before my "repair" operation was scheduled.  How to have this removed SW, it's just our curiosity, I decided to start once more with a USB device installed to see if the hang up has continued.   By my surprise, the start went as usual by means of windows and office.  DAMN!  all this time lost, mine and yours!

  I contacted the company SW this morning and they found a way to modify their SW and get the boot to work (always with the unencrypted disc).

  I wanted you and someone on this thread to know the outcome, so if this happens in the future with another user, this can help to avoid long-term on unnecessary troubleshooting.

  Thank you once again for all the time you have helped me with this issue!

• My compaq pc is not booting of windows 8 op cd

  RAM is 1 GB

  processor - 'p4 - 519 k' is 3.06 ghz

  I enter in the boot menu, then select cd rom but nothing happens pc begins to boot normally with windows xp Service Pack 4.

  I had upgraded 3-4 years more soon. the cpu is 6-7 years old.

  Windows 8 cd which I use is reached with acer aspire v5 131.

  I want to see windows 8 on it.

  I need help fast. I will be really grateful to you.

  I hope that Microsoft will help me.

  dated March 27, 2014

  Windows 8 requires a DVD player, not a CD player, if you have a CD player, you will need to use the upgrade wizard and the installation of Windows XP. (in addition, there are no Windows XP SP4)

  You must make sure that your computer supports Windows 8:

  See:

  http://techingiteasy.WordPress.com/2012/11/06/part-1-how-to-upgrade-using-the-Windows-8-Upgrade-Assistant/

  then:

  http://techingiteasy.WordPress.com/2012/11/07/part-2-How-to-upgrade-using-the-Windows-8-Upgrade-Assistant/

  To learn more:

  How to upgrade Windows XP to Windows 8

• Tecra A2 does not boot to Windows

  My Tecra A2 has suddenly stop windows boot.

  I get the screen "We apologize for the inconvenience...". "who says Windows shut so unexpectedly and asked to choose how I want to start (Safe Boot, known parameters of Las, Normally etc.)

  When I choose one of those Win XP start screen comes for awhile, then the PC reboots and the screen "We apologize for the inconvenience...". ' rises again.

  Any ideas how solve/fix this?

  And what do you think could be done to solve this problem?
  What do you think of reinstall Windows?

  In my opinion, it is a very good solution for this problem. Just boot from the Toshiba Recovery disk and follow the instructions on the screen. All that s!
  Or you take a drive to Microsoft and download the drivers from the Toshiba site.

  Good luck!

• Drive hard Smart check FAILED 1. It does not boot to windows. Do I need another HD?

  Hello

  (Sorry for my English Italian..) I started windows, but strangely it went very slow, he continued to work, but very very slowly (no internet, it seems that I had 30 MB of RAM!) So I started "HDD regenerator" and he found bad sectors.

  When I finally interrupts him (too much time, 4% in 24 hours) the laptop (HP PAVILION 15 n006sl) can't find windows, it asks for me to start a startup (like a USB stick or a cd) disk.

  INTELLIGENT CONTROL: FAILURE

  FAILURE ID: GQF1VK-709794-MFPWXF-60BE03

  HARD DRIVE 1

  ---------------------------

  For more information, please visit: www.hp.com/go/techcenter/PCDiags

  What should I do?

  There is nothing I can do without having to buy a new HD?

  Thank you

  Ernesto

  Hello

  Error code 24 characters for the SmartTest failure would indicate that hard is defective and must be replaced.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - includes the complete model number and Nr laptop - see here for an explanation.

  Kind regards

  DP - K

• computer not boot vista windows after moving it __error message: reboot and select the right Boot device.___or Insert Boot Media in selected Boot device and pressed key__

  My computer worked fine Windows Vista Home Premium. I stop him, he moved to another room, reconected everything and now it won't start. I just got this message:

  First: Hardware Monitor with a lot of temperature and tensions etc.

  Then: Reboot and select proper boot device.

  or insert media in selected Boot device key start and pressed

  You will probably have to open the computer case and check the cable from hard drive, graphics card, RAM, etc., to make sure everything is neat and tight fitting.

  Remove cards, and then reinstall them using to ensure that they are properly installed.

  See you soon.

  Mick Murphy - Microsoft partner

• My computer does not boot to windows...

  I have an inspiron 1525 with vista. my computer turns on, then it comes to a screen that has two options: run the Startup Repair tool and start windows normally. If you select Launch Startup Repair tool, it returns the same screen. This leaves you with only the option to start windows normally. used to work startup repair. I tried several times, but it has not fixed the problem. Restore my computer to a restore point, the first time she did nothing much next time. Then by selecting this option, you referred in the same screen. When you start windows normally, it is a screen that says:

  Checking file system on D:

  The type of file system is NTFS.

  Volume label is RESUMED.

  One of your disks needs to be checked for consistency. You can cancel the disk check, but it is strongly recommended that you continue.

  Windows will now check the disk.

  He checks everything and then restarts, only to rebuild the disk check. This time, he said:

  Checking file system on D:

  The type of file system is NTFS.

  Volume label is RESUMED.

  One of your disks needs to be checked for consistency. You can cancel the disk check, but it is strongly recommended that you continue.

  Windows will now check the disk.

  Corrupt master file table. Windows will attempt to recover the master files of the disk table.

  and then he said: he is unable to recover the master file table.

  He then takes me to a black screen with the mouse arrow. I can move the arrow but noting else arrives. I leave it like that for an hour hoping he would charge or something. I am very frustrated and any help would be greatly appreciated.

  
  

• I get startup repair screen when I try to boot my laptop from dell inspirion windows 7, I run the scan and detects any errors. When I ran repair usb key received the error 0x400110020000100A

  I get startup repair screen when I try to boot my laptop Dell Inspiron windows 7, I run the scan and detects any errors. So, I tried to use a USB repair for a laptop Dell Latitude Windows 7 pro and I still can't the computer to start. Tried to restore to the factory settings, can not. I have no image, backups, all missing, restore points?

  After that I tried to launch the USB repair I got 0x400110020000100A error code and I received error (0x8007027E) indicating the device will not start without a reboot.

  Anyone know how to fix this?

  Any advice would be greatly appreciated. I'm not computer illiterate, but am not pro either. Just use them not program them or even understand all languages!

  ____________________________________________________________________________________________________________

  Dell Inspiron laptop about 4-5 years.

  Running windows 7 Home Edition.

  Does not start little matter what I tried.

  If I remember correctly, I looked in MS-DOS mode and noticed that it said something like "x: win...» "that seemed strange to me because I thought that it should say"c: victory... "but as I said I am not a computer wiz so if anyone can help me, I would appreciate it.

  I'm about to rip the hair off my head with my laptop. My latitude was blue planned, surprisingly I fixed it (don't ask how, you couldn't tell). Then my dell inspiron would not start right after my dell latitude fell out of my truck and landed on the sidewalk, wanted to kill the person, the screen is broken. I can use it but it is very difficult, see a mosquito net and not perfectly clear, works well. lol someone knows somewhere or that would install a new screen for a reasonable price? I live in the Boston area.

  Back to the laptop won't start not, when I ran repair USB key received the error 0x400110020000100A

  Hello

  Thank you for the update on the issue. I appreciate your time and effort in resolving this issue.

  You can try the following methods and check if it helps.

  Method 1:

  You can use the Bootrec.exe tool in the Windows recovery environment (Windows RE) to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)
  • A boot sector
  • A Boot Configuration data (BCD) store

  Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

  Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  If the problem persists, proceed to method 2.

  Method 2:

  Please follow these steps:

  1. Tool command prompt open in the mode of the Windows recovery environment .
  2. You will see X:\Sources
  3. Type chkdsk c:\ at the flashing prompt to launch the utility Chkdsk. replace c:\ with the letter of the drive that you want to run the Chkdsk utility. If the hard drive is d:\, then type that instead.
  4. After the "chkdsk c:\. "insert \f command to fix errors on the disk volume or the \r to recover bad sectors and then press ENTER.
  5. Restart the computer once the chkdsk command has completed.

  Note: Running chkdsk on the drive if bad sectors are found on the hard drive, it attempts to repair this sector, if all available on which data may be lost.

  For more information: Please refer to the section of the additional If you can not boot into Windows at all stages in the following link.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8.

  Acer E5-471

  When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8. Only a black screen and mouse pointer appear. How can I solve this problem?

  Hello

  1 power off the device
  2. power on and immediately keep taping Alt + F10, unit will start to recovery, choose Exit & continue to windows. Post back if I helped

• Laptop black screens after the latest updates of windows... wil not booting in SafeMode (black screen).

  Windows Vista 64-bit... Black laptop after the latest updates... windows screens will not boot into SafeMode again black screens.

  Hello

  I would suggest trying the following methods and check if it helps.

  
  Method 1:

  Try the steps in the following Microsoft article and check if it helps.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem:

  http://support.Microsoft.com/kb/934540

  Method 2:
  You can refer to the link below and check the drive for errors:
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Warning: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  If the methods mentioned above do not solve the problem, then it would be best to contact the manufacturer of the computer.

  For more information, see the following Microsoft article and check if that helps.

  
  Why my screen is black when I start Windows 7? (Applies to Windows vista)

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista

• Windows Boot Manager - windows does not have charge as the HAL is missing

  What does that mean? What should I do to fix? I have no windows installation cd that I bought the laptop with all the software on it - it was a demo in Comet

  Hello

  I guess the \System32\Hal.dll is missing.
  This means that your windows operating system must be reinstalled.

  I put t know what laptop you have, but I think that the Toshiba Recovery Disk Creator was preinstalled on your laptop. This software creates recovery Toshiba DVD, that help you to reinstall the operating system. But now he s at the end you can not boot into the operating system.

  You can try this:
  Press F8, choose repair my computer, then select Toshiba HDD Recovery.
  Maybe this option is available.

  Otherwise will need you a Windows installation disc

• Can not go beyond "Windows Boot Manager".

  The following message appeared after restarting my computer (Toshiba Satellite A200 1V0) from a window vista update

  Windows could not start. A recent hardwre or software change might be the cause.
  To solve the problem.
  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "repair your computer".

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Boot\BCD
  Status: 0xc000014
  Info: An error occurred trying to read the windows boot configuration data

  Now my problem is that I can not change same anytthing for my computer to boot from CD - I do not have a windows disc but produced Toshiba recover disk but nothing works at all. Ive tried pressing F2, F8, F12, DEL... in fact almost all of the keys just in the hope that it will work.

  Anyone got any ideas on what I can do. IM resigned pretty much on the fact that Im going to lose everything that I just need the computer to the top and running again as soon as I can.

  Thank you very much

  Until one of the experts can give you advice on the repair of your Vista system, you might like to try to recover your files. I'm not very computer literate, but managed to achieve this when I "killed" my installation of Windows 2000. I ASSUME the same process should work with Vista. (Somewhat disturbing, Windows passwords do not seem to matter.)

  Download a Linux live CD - Linux "Puppy", I found a small one - download good and easy to use. Burn the .iso file, resulting on a CD. Insert the CD into your CD/DVD drive and start the computer. Let it boot the Linux operating system. (You may need to experiment with the BIOS settings for the computer to boot from CD before its own hard drive).

  You now have a linux regardless of your hard disk operating system. (If it is one of the major Linux programs, it will be slow when run from CD - is not a problem - just requires patience!)

  With a little luck, the Linux system will see all disks connected to your computer, including your hard drive. (The same as your normal operating system sees a USB and can copy files, for example.) You might then be able to browse the files on your hard drive and copy them to a disk external drive or USB key.

  I met a few issue permissions to write to the external drive - sorry, can't remember the flippant answer but it was very simple - and had only once. Again, it just Google the problem. There are many experts Linux display discussions out there!

  This does not allow you to start your Vista system or something like that, but if you can get your files copied to a safe place, so you can just copy them back once you have reinstalled the offending Vista system.

  I'll try to provide a link to an answer that I already proposed here - Sorry, it's a little tedious, but the link it can be useful, too.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=44736&TSTART=30

  One of those things that is easier to do than to describe, perhaps - lots on the internet about Linux rescue CD.

  I found a lot of useful articles on this google link:

  http://www.Google.co.UK/search?hl=en&q=using+a+Linux+live+CD+to+rescue+Win dows + files & btnG = Google + Search & meta =

  I've never been good by entering search terms. you will find many things better.

  But the good news is that it would be possible to recover at least some of your data before reinstalling.

  If you have not used Linux live CD before, first do some work at home. They are surprisingly easy, especially when you have overcome one or two of the usual initial traps for example try to burn the live CD as data rather than an iso CD then wonder why it won't start. Proabably more easy for you to do a little research on Google than for me to write pages here!

  Another alternative, if you're better to dismantle the computers than me, would be to remove it from your hard drive and install it in a suitable external hard drive enclosure. This can then be connected to another computer via a USB port and you should be able to read your files as if a USB flash drive and copy them. I only tried this with the old readers of old desktop computers with nothing on them that counts too - but it seems easy enough. Once again, just a way to copy all your stuff before wiping the hard drive of your laptop and reinstall Vista.

  Sorry if it was a little hike - hope that gives you some ideas.

• laptop does not start in windows

  Computer hp pavilion dv6 3085tx laptop I used for 2 years, nw its not start in windows, but it boot in the BIOS, I have given hard drive that test by pressing F4, the result is quick (303) hard drive and disk hard full (305) are red and yellow smart hard drive. When I tried to recover windows OS with recovery disks, it shows, unable to do the partition E drive error. If completely damaged hard drive? If so, have to return disk hard nine or any other solution?

  Looks like your hard drive needs to be replaced.
  
  Here is the service manual for your laptop:
  http://h10032.www1.HP.com/CTG/manual/c01758220.PDF
  
  If you look down in the Description of the product, you should see what hard drives are supported by your computer. Looks to up to 500 GB (5400 RPM). You can also visit www.crucial.com, type in your product number and they will make recommendations to hard drive. (You may be able to get more than a 500 GB hard drive, but you may need to update your bios to recognize).