My messses up just mouse pad stops working

Similar Questions

• The yellow light that locks / unlocks the touching mouse pad stopped working

  Hi, last week I couldn't block touching my laptop mouse 4720 s probook. The light shows just not when I double click on it. It simply no longer works. Here I need to download the software again?

  Hello

  First, download the latest installer driver Synaptics, on the link below and save it in your downloads folder.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4145330&prodNameId=4145205&swEnvOID=4058&swLang=13&mode=2&taskId=135&swItem=ob-101045-1

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  When this has completed, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  Once done, restart the laptop.

  Kind regards

  DP - K

• sMy Microsoft UDB wireless mouse has stopped working. Can it be repaired or is it just did.

  My Microsoft 3000 wireless optical USB mouse has stopped working.  Can it be repaired or is it just did.

  Hello

  -Don't you make changes to your computer because of which the question began?

  I would recommend that you follow the steps in this article and see if they help.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

• Keyboard and touch pad stopped working on Satellite L750

  My laptop L750 keyboard and touch pad stopped working on start up. I now use a USB mouse and on-screen keyboard to do anything either. I have tried several things to fix, but nothing seems to work.

  I've updated keyboard drivers, tried related work key, updated and run antivirus software and restored to a point in time before the show. Still no luck.

  Any ideas?
  Thank you

  Keyboard drivers?
  Can you please send the link to download? It is unclear to me that the own keyboard driver.

  In any case, can you use keyboard and touchpad if you start the operating system in safe mode?
  Are you using the original pre-installed OS that you got with your laptop?

• 2.4 GHz HP wireless optical mouse has stopped working

  My wireless mouse has stopped working. I use it on a laptop Windows 8. I used this mouse wireless with this computer for almost a year. All of a sudden it just stopped working. I changed the batteries, so it wasn't the problem. I have uninstalled and reinstalled software and that did not work. Is there anything else I can try before I buy a new mouse? Product # is WT564A.  The model # is FHA-3510. The S/N IS CN1 [personal information]. Product #, model # and s/n is not the computer mouse. Any help would be greatly appreciated.

  Hey there eunash,

  I found three links that could help you, please take a look and try some of the steps:

  Keyboard and wireless mouse troubleshooting

  Mouse, touchpad and keyboard with Windows problems

  .. .and finally, check out the Merita post on this thread, they had some good ideas while explaining what might be going on: http://h30434.www3.hp.com/t5/Other-HP-Consumer-Products-and-Technologies/HP-FHA-3510-mouse-trouble/m-p/2666383/highlight/true#M10473

• My touchpad on my laptop and my mouse suddenly stop working.

  My touchpad on my laptop and my mouse suddenly stop working.  The cursor just sits there in the center of the screen.  Device Manager indicates that they are working.  I tried to remove the drivers and reinstall them without a bit of luck.   Help

  Hi Zippy,

  I suggest that you try to do a restore of the system, here a guide with Visual effects.
  See you soon ~

• Satellite C660 - the mouse pointer stops working when you start program

  Some features:
  Toshiba Satellite C660-1r1
  Windows 7 sp1
  Avast Antivirus (free version)

  Problem:
  When I start a program (for example. Sonos controller) on my laptop my mouse pointer stops working. It does not happen with all programs! When I go into Device Manager, my synaptic touchpad and my hid mouse is working also. When I press ctrl - alt - del, the pointer can move again, but when I come back it stops again. I have a work around is not a solution

  When I disconnect my windows account and log in again, it will solve the problem. When I start a program again the pointer will freeze up again.
  I did a complete system of virusscan and a pre start virusscan and my laptop is virus-free.
  I uninstalled the mouse and in drivers reinstalled synaptics them but that has not worked. I added a new account windows but that did not work.
  By pressing the keycombo FN + F9 has no effect.
  I am somehow at the end of my ideas...

  Can anyone help!

  When I start a program (for example. Sonos controller) on my laptop my mouse pointer stops working. It does not happen with all programs!

  This problem happens using the touchpad only or have you noticed the freezing of cursor using the external USB mouse too?

  What is the notebooks touchpad works properly without loading and using this 3rd party software?
  For example, work the touchpad with Microsoft office (Word, Excel, etc.) or navigation in internet by using IE or Chrome?

  My guess is that the pre-installed 3rd application part could affect the functionality of the touchpad.

• Satellite L350 - pad stopped working after BIOS update

  Hello

  The digital pad stop working after upgrading the bios on a Satellite L350-170 (1.90-online 2.20).

  Any ideas?

  Concerning

  The value of the default BIOS and test it again.
  NUMLOCK button works (LED on / off)?

• HP touchsmart IQ775 Wireless mouse has stopped working.

  Wireless mouse has stopped working. I have a HP Touchsmart IQ775 so I can touch the screen to navigate. did a restore of the system in SafeMode this morning and everything works fine now, but of course, it happens again. Last week, the computer did an update to quicktime which disabled, so I had to completely uninstall quicktime and the mouse immediately worked. looked but could not find that whatever this is updated overnight to re - train the problem this morning. However, the system closed and said 'power system failure driver' cannot know how to fix this, all say updated mouse drivers. is associated it with? This not computer savvy, usually google problems on my ipod touch and looking and staring at me but were not able to understand this. Thanks for all the tips

  Hello

  HP also has their own update so he could be there?

  I would stop automatic driver updates, because they are often older certified and MS is far behind.

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
  ------------------------------------------------------

  This, to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Try to run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------

  Also check with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• USB mouse & keyboard stop working after the upgrade of Intel generic drivers drivers!

  Original Post: USB mouse & keyboard stop working after upgrade to generic drivers

  After you install Windows, the Generic USB controller drivers are installed. My mouse & keyboard as planned work & that are each recognized as "compatible mouse/keyboard HID."

  After I installed the Intel drivers for root USB controller, the mouse & keyboard stop working and are classified as unknown. Shortly after, they are considered HP USB Optical Mouse & HP USB Standard keyboard, however the drivers never properly install and they remain under unknown devices with a yellow exclamation point.

  I have searched high & low for these device drivers, they do not exist. I installed the drivers for all of the materials appearing on the site of the seller. This has happened on several computers, laptops and desktop computers.

  I've done all the troubleshooting I can think. Uninstalled all the controllers/USB hubs & restarted. Switched USB ports, I tried new mouse & keyboard, wanted Windows updates.

  The only way I can make it work is if I use the generic Windows drivers, who then recognized the mouse & KB "HID compliant". It seems that if I install Intel drivers, it recognizes the mouse & keyboard more in detail and he wants specific drivers to continue.

  Any help / suggestions would be greatly appreciated.

  Thanks for the reply.

  Because your computer is on a domain network, it would be better to be posted on the TECHNET forums. They are experts in your field of investigation and would be in a better position to answer your concerns.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w8itprogeneral&filter=AllTypes&sort=lastpostdesc

  In the future if you have problems with Windows. Not to contact us. We will be happy to help you.

• Mouse Bluetooth stops working when you use Remote Desktop

  Hello, I have a Dell i7 using Windows 8 and a comfort Sculpt bluetooth mouse.  The two work together well, but when I use remote desktop, the mouse stops working.  I have checked the logs of windows, but don't see anything apparent that would explain the bluetooth mouse to stop working with RDP.  Is this a known issue?  And is there a known solution?

  Hi Sharief, thanks for the quick response!  I think that I could find my own solution to the problem.  I ended up remove the bluetooth driver that came with my Dell laptop and allowed the Microsoft Generic bluetooth driver to take charge.  The mouse now works like a charm, especially when I am using RDP.   I did have a problem again on the generic driver.  Thanks again!

• Equium L10 - touch pad stop working (mouse)

  Hi guys,.

  really need your help. I have an Equium L10-300 and my touch pad has stopped working. A few days back, he started to freeze, but reboot solved the problem... but now it has stopped working all together. The icon that normally indicates at the bottom right of the screen disappeared. Have done the FN9 thing and tried to look at the settings...

  Help, please

  Thanks, Pete

  Hi friend

  have you already tried to remove the mouse from the Device Manager? Or reinstall the driver would also be a very good attempt to resolve this situation as a whole.

  The first step that needs to be done is to exclude a software error, then go-> http://eu.computers.toshiba-europe.com/-> support downloads & -> support-> download home page-> download drivers

  Get the driver for your mouse and reinstall. If it shouldn´t work then come here and we will see what could be the next step...

  Welcome them

• Touch pad stopped working Satellite Pro R850-143

  I have a satellite pro R850-143 and be back on these forums, I need help!

  My touchpad has stopped working and I cannot use the mouse if I attach a USB

  Everyone could speak more, or I'm leaving I better return just to Toshiba (it is only 3 months old and still under warranty)

  Hello

  Are you sure that the touchpad has not been accidentally disabled by pressing a combination of keys?
  Usually the touchpad can be activated a disabled using Fn + F9
  Have you tried that?

  If this isn't it!

• My Apple wireless mouse has stopped working.

  Initially, software system warned me that the batteries are low.  Then it stopped working completely.  I replaced with new(tested good) AA batteries and the mouse still does not connect to my iMac. 10.11.3 is updated software.  My trackpad works ok so the BT Service is always good. I even tried an another Apple wireless mouse and it doesn't connect either.  Can an optical mouse as this just failure?

  A mouse can not just, indeed at the end of his life he cannot do anything else.   I think that your first test is to hold the mouse upside down and check if you have a green light display.    If so, the batteries are probably ok.   If the light flashes, it is most likely, connections are at fault.   Clean the inside of the battery carefully in case there is any residue of previous batteries.   Clean your battery connections and try again.   You could also try your mouse (indeed, two of them) with another computer, maybe a friend.   It doesn't matter if it's a pc.   That will confirm the effectiveness of the mouse.

  Magic Mouse 2 has been designed and developed for El Capitan (10.11.3)... so old mice may not work as well, but I have yet to hear any complaints.

• ThinkPad Bluetooth Laser Mouse buttons stop working

  My ThinkPad Bluetooth Laser Mouse is a great device, except that very often the buttons stop working; for example, I can click the close X at the top right of a window and nothing happens. I found that cross all possible button clicks, including failover of the scroll wheel, will get running again. My assessment is that the software Lenovo mouse Suite merges very often on the State of the mouse buttons; for example, software problem, not a hardware problem. Frequency is approximately 1 event in 20 hours of use. What must I do to get help?

  Windows 7 x 64 with all updates

  ThinkPad X 220 with built-in Bluetooth

  Mouse Suite Lenovo: 6.47 (upgrade to 6,48)

  UPDATE: just had to happen once again (still ongoing: 6,47). I tried a lot of things with the mouse and the only thing that solved the problem was to tilt the mouse wheel (first to the left then to the right).

  UPDATE: I recently had the left and right tilt scroll wheel assigned to respectively backward and forward, and I don't remember having this problem before I did these assignments, so I changed both of these assignments to disabled to see if that makes a difference. I've also updated the Mouse Suite version 6.48 software.

  

  For further investigation:

  100% reproducible failure

  When I opened Firefox 11.0 with only one tab, the window control icons (Minimize, Maximize, Close) would correctly highlight on mouseover and works correctly when you click on it. When I then open or switch to another tab, there was no highlight on mouseover and is no longer, they responded to clicks. Other actions of the mouse work properly, including the icons of window control in other apps I tested.

  I uninstalled then reinstalled Firefox 11.0, define a new profile is empty, and the problem persisted. I checked for other reports of this problem in Firefox, and while I found a (very) few similar reports, I found that there was no evidence a general problem in Firefox.

  Successful correction

  I uninstalled ThinkPad Bluetooth Laser Mouse, mouse, Lenovo, ThinkPad UltraNav Utility, ThinkPad UltraNav Driver and rebooted, installed just the TrackPoint with the Microsoft Compatible PS/2 driver, and the problem does not recur. I think only installed two UltraNav packages with system update, then the Lenovo ThinkPad Bluetooth Laser Mouse with mouse Suite, and the problem still does not happen. It continues to operate correctly.

  My assessment

  My assessment is that something subtle had screwed up in Lenovo UltraNav and/or mouse Suite, which has been fixed by uninstalling and then reinstalling everything. I don't think that there is a problem in Firefox.