My printer does not connect to Web Services.

Similar Questions

• 7520e HP photosmart all-in-one: 7520e photosmart printer, does not connect to web services

  My printer was working fine, I share wireless between your desktop 8.1 windows 64-bit, windows 7 64 bit desktop and a windows 8.1 64-bit laptop, the latter is rarely used although it remains connected.

  Now, for some reason, my printer cannot connect to web services, it says an error has occurred, but you may still be able to use some of our services.

  I can connect to e print without any problems and it is connected to my network and wireless, I managed to send faxes, but only from the top of the charger of my printer page and not my computer, but at least it works, I can do a sheet of coverage since the fax software.

  Is this one of printers who had a few apps taken away from him? If so, this may be the problem with the web services.

  I uninstalled my software to print several times and re installed as has a HP technician but still no luck.

  Any ideas please.

  It print and scan very well although I have on my desktop windows 8.1 for the moment, I still have to

  install it on my windows desktop 7. Last night, when the technology installed on my windows desktop 7, he says you correctly it installed-windows 8.1 desktop, which of course was incorrect. I am the administrator on office computers, no homegroup, or user accounts, I just choose to share.

  Hello @emma22,

  Appreciate your efforts.

  Please check the picture below:

  

  Go to printer EWS - network - wireless - IpV4

  Click the manual IP address - suggest a manual IP address.

  Select the manual DNS, then choose 8.8.8.8 and 8.8.4.4

  Save the settings.

  Let me know how it goes.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• ENVY 5530:5530 does not connect to web services

  I bought a FANCY 5530 yesterday and followed the instructions for setting up wireless. It prints and scans. However, it does not connect to Web Services. One suggestion is that it may require a proxy server details: How can I get these details? I'm not aware that I use a proxy server for internet connection. What can I do, please?

  I am using Windows 7, 64 bit OS

  After a pratting very long on this labyrinthine web site, I was allowed to telephone support. The solution has been offered instantly, which suggests that it is certainly not unusual. Here's what to do:

  1 assuming you can communicate with your printer, open its IP address in the browser.

  2. Select the tab 'network '.

  3. Select "network address (IP)" in the list on the left.

  4. enter 8.8.8.8 as the preferred manual server.

  5. enter 8.8.4.4 as auxiliary manual DNS server.

  Which corrects the problem. Thanks to the lovely people I spoke with.

• HP Envy 110 All In One printer: HP Envy 110 series does not connect to Web Services

  I had the printer a number of years and it works very well. I wanted to set up the service of replacement with HP ink, but apparently the "Web Services" are not put in place?

  The iprint app refuses to implement. (says it is not connected to the internet and it is!)  I have tried restore factory settings and delete and reinstall on my laptop, nothing helps. I tried to enter the ip address in the browser, but it still does this end no more.

  The MNA I am doing wrong?

  Help, please.

  Thank you

  Welcome to the Forum from HP Support. I hope you're well @Amchad!

  I read on the web-services and wanted to stop doing you to share my suggestions.

  As of September 1, 2016, Web Services stop working and are no longer supported on some printers. I'm afraid that your printer is on the list and therefore not compatible with web services. The function ePrint and other web services are not available on this printer.

  Please check the details here: http://hp.care/2eKfeK2

  As an alternative to HP ePrint, go to Google Cloud Print (in English) to set up your printer as printer 'classic' to use Google Cloud print with your printer.

  Hope that answers your questions. Let me know!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• PhotoSmart 7520 does not connect to "Web Services"

  My new PhotoSmart 7520 eAll-in-one printer will not connect to the "web services" today. Yesterday all top and work without any problem. Any app I try, it gives me the same error message.

  I run Win XP, the computer is connected to a wireless router with LAN feature. My printer is connected through the LAN. It was working fine yesterday. I did no changes since last night my computer system.

  I'm and turned on the printer and went to print simple Crusaders and received the message that it cannot connect to the 'Web Services '. Sever after tests, I check wireless settings and it shows that it works with an excellent signal strength. The Mac address shows as does the correct IP address for the printer.

  I checked my router to see if she was talking to the printer and everything was correct and functional. He showed increased activity with the printer wireless and work, the IP and Mac addresses were both correct.

  I followed several statements of SUPPORT from HP on the withdrawal and the reactivation of the Web abuse and got a print both times I tried it.

  Just before I downloaded HP Print and Scan, a small icon doctor appeared in the system tray in the lower right by saying that the computer analysis was not available. I ran the program doctor and ran the fixes to scan and print. The small icon disappeared, but I don't know what has been corrected.

  I turned the printer and on again at least twice. And I ran twice wireless configuration software.

  I can always connect to web services. I didn't have this problem when I set up the new printer Saturday. It worked fine until this morning.

  I'm not having any problem connecting to Internet with other software.

  We will define a static IP address and (most importanly) an external DNS for the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.
  
  After that, you will have to redo 'Add printer' using the new IP address.

• Photosmart HP 7520: HP Photosmart 7520 does not connect to web services

  My printer suddenly stopped connecting to the Web Services a month ago. I had already used web services successfully for two years, then my computer infected with malware and ruined a lot of things. I guess that it also affected the printer since it is at the same time ceases to function properly. I can print wireless very well all of my devices, but doesn't connect things like regular printable.
  
  I tried restaring the printer and the restoration of the default network printer. I also tried the steps listed in this forum http://h30434.www3.hp.com/t5/Inkjet-Printing/HP-Photosmart-7520-unable-to-connect-to-Web-Services/td...

  Hello

  Apologies for jumping!

  For the Photosmart 7520, the latest firmware must be installed in order to maintain a connection to Web Services.

  The firmware can be installed on any Windows PC via the following link:

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5199462/swItemId/OJ-113641-5

  Kind regards

  Shlomi

• Brand new Photosmart 7510 does not connect to Web Services

  Nice day! I am trying to solve a problem for a customer and I hope that someone can help you. I found a couple of other discussions with the people affected by this problem, but the solution did not help. My client has a Photosmart 7510 is all new and it made me get setup for him. The printer is configured, connected to its wireless network, the software is installed on his PC 3 and I can print of each of them. However, we are not able to activate the Services Web is a key reason that he bought the device.

  When we try to turn on Web Services, the printer successfully checks for an update (none are available) but then times out during the server communicating with Web Services... scene. I get the same result if I try to activate Web Services via the printer, thanks to its web Interface or via the installer driver on a PC. Depending on the Network Configuration Page, the printer is properly take an IP address (including DNS) from the router. I tried to set an IP through the web INTERFACE as well by changing the DNS servers 8.8.8.8 and 8.8.4.4 with no improvement. I tried power cycling router of my client and I also tried setting the parameters of encryption on the printer manually instead of using the automatic mode. All computers, my laptop and iPad can use Internet very well, but Web Services will not be activated on this printer.

  Is there any other suggestions that I can try? Is it possible that Web Services are just down right now? This particular unit is defective? My client bought this partially to access ePrint impression from his iPad, so it is essential we get active Web Services. If anyone can help, I would be very happy. Thank you!

  Hello PXAbstraction,

  The servers are being updates not scheduled at this time.  The best thing to do is to wait 1 to 2 hours at least and to 24 hours, then try again.  If this is not enough, let me know and I'll see what I can do.

• New router, same info. Printer does not connect. Help?

  I have a printer all-in-one Officejet 4620 wireless. I have a new router (the same brand and model brand new), and none of my info has changed. My printer does not connect to the internet more. Always has the info saved just does not connect. I had to re - enter the password in all my other wireless devices, but how do I do on this printer? I'm sure it's my fix. I have searched all over the Control Panel, all the web help HP, used the scan doctor and even called HP and they said that my warranty is out I have to pay for my support. Still an issue like this... Was a bit irritating. Or if I have to reset the printer to the factory and Redo setup wizard is too cool. I tried this one on board printer under network without success. Any help on this would be great! Thank you!!

  Let's try here.

  Replacement of your wireless router

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• HP Deskjet 2540: Printer does not connect

  Hello! I managed to connect my printer via the cord, but all my efforts to connect wireless have not been successful, even after you install the drivers appropriate for Windows 10. It seems to connect and to detect the router but when it promts me to enter information to check the connection, it does not connect. He also promts me to enter the information that is displayed on the printer, but it is not anything related to this wireless network. Help, please!

  Hi @paige101us and welcome to the Forums of HP!

  I see that you have connectivity problems.  I would like to help!

  I would recommend your computer off.  Once the computer is down, unplug the power cord from the printer and the electrical outlet and remove the power of your router for 60 seconds.

  After 60 seconds, reconnect the router.  Once the router has started broadcasting, reconnect the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  After that the printer is turned on, run the wireless configuration.

  I also suggest this document:

  Troubleshooting wireless printing Center

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Canon printer does not connect via the IPP Protocol

  I work in a company that sells printers offices/schools/etc. Yesterday, we received a call from a customer indicating that the Copier, we sold them connected not to a new computer they bought.

  I went to the site and noticed that the computers in question were all purchased during 3 months and all loaded with Mac OS X El Capitan. Most was registered on 10.11.3, and some 10.11.2 and 10.11.1. All computers work turned Yosemite.

  We receive a message somewhere in the sense of "Communication error. This printer may not be able to [print], you want to save it anyway? »

  It was a cannon imageRUNNER Advanced C5235. The client declares that if he saved the printer, it would not be able to print, but would still see jams paper, messages and other statutes of the computer printer toner. After attempting to remove and reinstall the printer using the most recent driver available on the Canon Website, we received the same error, the customer received. We escalated it to Canon support, who asked us to choose LPD instead of the PPI for the Protocol, allowing the printer to you connect and start printing on all devices running El Capitan.

  After further research, to my knowledge, the ISB is more recent and has more features that the LPD, although I couldn't find much on it so I was uncertain about the origins of these two protocols, except that they were introduced in the 1990s. I know it's kind of vague, but is better/more recent than PPI LPD? If so, great. Otherwise, is there a way to solve this problem and get computers that run El Capitan to connect correctly using IPP?

  The problem here is that the driver Canon UFR2 or PS that was used on the Mac to print in ADVANCE of Canon C52xx does not support PPI. This is why you must use an alternative Protocol.

  Note that it is possible to print to the C5255 using the PPI, but you need to use the Canon PPDs which means the copier must have the kit installed Postscript printer and you get not the pretty picture base views the pilot UFR2 and PS to give you.

  Second point is that the Canon UFR2 and PS drivers, it is preferable to use HP Jetdirect-Socket to the LPD protocol. He sent larger packets and verifies the status of the target unit - LPD simply sends data to the fixed IP address so if the printer has a problem you don't get this information until you walk up to the photocopier.

  I hope this helps. Answer if you need more information.

• Office Jet Pro 8600 can not connect the Web Service server.

  Apparently, I need to enter a proxy address. Where can I find details of proxy? I use Windows 7 and I just installed the printer successfully (wireless)

  Thanks in advance!

  KatiaZon,

  We are pursuing.

  Next would be to put a static IP address on the printer.

  To have the information needed to set the static IP address on the printer, press the right arrow on the front panel of the printer > installation > reports > network configuration.

  B. open internet explore and type the IP address of the printer in the address bar, then press on enter.

  The printer's built-in web server should pull up.

  C. click on the network tab upward.
  On the left side, click IPv4 on your connection type, wired or wireless.

  D. change the IP from automatic to manual.
  Enter the same IP address, the default gateway and the subnet mask.
  Enter for the primary dns 8.8.8.8 and 8.8.4.4 secondary, then click on apply.

  E. after is the button clicked apply to apply the static IP settings, enable Web Services.

• Mac OS 10.4.11 using HP5150 printer: does not connect

  My printer was working fine until I changed the Tricolor cartridge (it's official brand HP #57).  He never printed a test page and don't do it, even with manual control.  Every attempt to print anything (in black and white - b/w cartridge is sufficiently full), computer does not seem to establish a successful connection with the printer.  All cables are connected correctly.  Have tried to unplug it and wait.  No improvement.  I guess that the diagnostic printer utility does not work on Mac?  Any suggestions?

  I have a 1.42 GHz Power PC G4, in case that's relevant.

  Thank you very much for answering.  I'll save this info for the future.  It's working now.  I suddenly had a flash that maybe the necessary printer cover an another really good hard bonk, or two or three and this seemed to be what he'll again obtained.  I had tried before, but not as hard as I did this time.  Finally, it came to pass.

  Thanks again!

• Phorosmart d 5510: printer does not connect to the network upgrade

  A combination of problems:

  I recently updated my broadband and also bought a new computer

  Today my printer has stopped working. I tried to reinstall, but my desktop computer, or laptop can connect with him. I checked this is the connection to the server, but it will connect with the SSID of 2.4 ghz. WiFi on my computer works with the SSID of 5 ghz. I guess that's the problem, but the printer will not recognize or find the SSID of 5 ghz

  Hello Dudley151,

  Thanks for stopping by the HP community! I see that you are facing problems with wireless connection. You have changed networks and are unable to get the connected printer.

  Yes, the problem is HP printers are not compatible with the 5.0 GHz networks.

  To get a better understanding, take a look here: wireless printing Center

  I hope that answers your question.

  This is a great question other clients may also wonder; Please click the "accept as Solution" if you think that this message has helped you, or could help others. You can say thank you easily by clicking on the ' Thumbs Up ' below!

• FileAdapter Exhibitor does not as a Web service

  Hello
  
  We have developed a read process bpel file but my file read operation: fileadapter is not exposeing as a Web service. so I can not able to test my bpel process in weblogic. so, how can I expose my fileadpter as a Web service.
  
  Please suggest,
  
  
  
  Thank you
  AJAY

  Hello
  When you create a file as inbound transaction adapter, test tab will be disabled because it is not exposed as a Web service. If you want to test, you must place the file in the required incoming directory you poll.
  You can change the location of the incoming directory by editing the file adapter properties tab.
  It is the only way that you can test.

  It is advisable to mark the answers as useful or Correct.

  Thank you
  Durga

  Published by: Durga Charan on February 25, 2013 12:45

• just bought a lexmark s505 printer, does not connect to vista Home premium assistance required please

  can someone give advise please

  Have you followed the guide to use during the installation of the unit: http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_INTUITION_S505&segment=SUPPORT&userlocale=EN_US&frompage=null#2

  Most but not all multi function printer/scanner requires that the software is installed before you actually connect the printer.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.