No audio hdmi Windows 7 64

Similar Questions

• Laptop HP TouchSmart 15: Audio HDMI notworking

  Hi team,

  After the upgrade to 1604 10 update Audio HDMI windows does not work in my PC laptop HP TouchSmart 15,

  non - model E6F34PA #AB4

  I tried almost all possiblties Google serach.

  1 put updated driver from compmgmt.msc

  2 re-ntsall IDT Audio driver of Intel

  2. use of the easy software I have updated all drivers.

  but it still shows no Audio HDMI sound source.

  

  When to check event under driver, I found the message below.

  Device HDAUDIO\FUNC_01 & VEN_8086 & DEV_2807 & SUBSYS_80860101 & REV_1000\4 & 2ffee478 & 0 & 0001 requires installation.

  

  could you please help on this issue.

  Thank you

  Riou

  Hello:

  Here's what you need to do to get the HDMI audio to work...

  Download and save, but are not run this graphics Intel W8.1 driver.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63750.exe

  Download and install this free utility for files.  The 2nd file is 64-bit.

  http://www.7-zip.org/

  After installing 7 - Zip, right-click on the file of the Intel graphics driver that you downloaded.

  Select 7 - Zip from the list of items.

  Have 7-zip extract of: and leave it to decompress the file in the file name (sp63750).

  After 7-zip created the driver folder, go to the Device Manager and click on the Audio device high definition with the! Select this option.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option and navigate to the driver 7-zip created folder.

  Make sure that the include subfolders is selected and the Intel HDMI driver should install.

  Then restart the PC, and you should have video and audio plays from the HDMI port output.

• No audio HDMI with Windows 7 Ultimate

  Since the departure of Vista with Windows 7 Ultimate, I lost audio HDMI.  I can connect video successfully to my Sony KDL46VL150 but will not come out through the home theater system.  It comes via the laptop.  I tried to update the drivers, but clearly, I have not found the right pair.  I tried as well through the website of HP, and Intel.

  The audio drivers in the system are now:

  Stwrt64.sys IDT High Definition Audio CODEC Version 6.10.6276.0

  Intel(r) High Definition Audio HDMI IntcHdmi.sys Version 6.10.0.2056

  I suspect that the HDMI driver is not 64-bit.

  Any other suggestions?

  Thanks for the tips.  I downloaded the drivers and the saved on the desktop as you suggested.  However, I could not find the graphics driver as you have described.

  I also followed the following suggestion I had to re-boot with the HDMI cable connected to the TV and it worked.  I see now that I have 2 identical drivers (Mobile Intel 4 Series Express Chipset Family) loaded in graphics cards.

  In any case, the problem is resolved.

  Thank you very much.

• Problem with my Acer Aspire 5552-5686 and 5.1 Audio HDMI

  Hi all, I recently bought a SONY HT-SS380 Home Theatre, and I tried to connect it to my Acer Aspire 5552-5686 by HDMI port. (I have Windows 7).

  My problem is that I have can´t set up the laptop to use more than 2 channels (stereo). I ve been looking around the internet and there seems to be a common problem with this computer, but I can´t understand why or how to fix it.

  I ve tried to install the latest Realtek Audio drivers, the Catalyst Control Center, some Audio HDMI of ATI drivers. I Don t know what else to try!

  Any help?

  Thank you very much!

  This isn't the audio chipset of this system, which I listed above.

  The audio chipset to send the data in 5.1 surround.  The HDMI port would support, if it was sent.

  It is not sent in this way, I listed above.

• Media Center Audio HDMI works partially

  Under Windows 7 Ultimate on a HP laptop. The HDMI port on the laptop is connected to my HDTV 1080 p. The sound works fine through HDMI when I navigate the menus. All sounds click and selection in Media Center out of the TV and they sound wonderful: rich, deep tones. The sound does NOT come through the speakers of the laptop. It clearly comes through the cable HDMI and HDTV.

  (Sorry to be so redundant here sounds but I needed to make it clear that HDMI audio through the TV works somehow.)

  However, when I play recorded TV or live TV via Media Center, it is without audio at all. When I run the audio Setup Wizard in Media Center, I get the same result. I hear all the button press tones when executing step by step through the wizard, but the actual trial play without audio through the HDTV. I did the audio HDMI by default in Control Panel, but it does not help.

  I got exactly the problem you described.  All the sound elements worked perfectly except for the live TV or record tv.  I tried all combinations of options that I could, I finally found this site with a slightly different question, but the settings got my audio work for the tv.
   http://www.gilsmethod.com/how-to-enable-HDMI-audio-using-your-HP-Pavilion-Media-Center-PC
  Goto Control Panel / hardware and sound / manage audio devices
  Make sure Realtek Digital Output Audio is the only one his device enabled
  Update highlight digital audio output, and select Properties
  Then select Supported Formats tab
  Deselect formats all encoded; so no encoded formats should be checked in this section (Note: If you do not select a format and then hit test you won't notice any noise is heard during the test)
  Make sure that only 48.0 khz is selected in the section of sampling rate
  Apply the settings
  Return to the Media center and sound should work for live TV

• No audio HDMI via HDMI to SONY LED TV connection

  When I connect an HDMI cable to my SONY LED TV it shows no audio HDMI to TV, only the image (what ever on pc), but the audio is coming from speakers to computer.

  Hi Umesh,

  Follow the steps below to see if the problem can be solved.

  1. right click on the volume icon in the system tray, click playback devices.

  2. right click on the empty space of the playback window, click on "Show disabled devices" and "show disconnected devices".

  3. check if HDMI is listed, if so, set as the default value.

  For more information:

  HDTV: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

  We know if you need help. We will be happy to help you.

• HP ENVY 15-u010dx x 360 Convert: KILL Beats Audio for Windows 10

  Not sure if I have 32 or 64 bit, but I just upgraded to Windows 10. I don't remember how I was able to kill the junk of Beats Audio terrible, horrible in point 8.1 of Windows, but I killed successfully before. Now he is back and sounds horrible. Please help me to get rid of it! I read the other posts of the forum uncheck of the recent talk about things, but I don't see anything to uncheck having something to do with IDT or whatever they were talking about. I want to just go back to nice, generic, pure audio. Help!

  Never mind. I found a solution here:

  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/problem-disabling-beats-audio-w-Windows-10/TD-p/5169630

  The difference with my HP laptop, is that there is no visible IDT pilot to change the driver on. I tried instead by changing the driver for the Realtek device. It worked perfectly and not horrible Beats Audio! Who thought Beats, it was a good idea anyway? Worst sound EVER! Now I'm back to listen to sound pure and unaltered!

• Dual Boot Vista/WXP - cannot install audio driver Windows XP Home edition

  Hello
  I installed Vista on a P105-S9722 (it works fine) and created a second partition for installation of Windows XP Home edition. Everything is ok except that I'm unable to install the Conexant audio driver (I have a yellow exclamation point in device next to Conexant High Definition Audio Manager). Earlier I was able to install it on a simple boot WXP partition.

  Thanks a lot for your help.

  Have you tried installing the driver for Windows XP audio right?
  I found another thread that you have posted here in the forum and you not known websites where to find the correct drivers.

  I found this audio driver XP for Satellite P105-S9722

  Conexant Audio for Windows XP driver version: 3.11.0.51

• Loss of whem audio hdmi is plugged

  Hi, I have a new hp pavilion i5 and the audio works fine until I have plug into my 25xi Pavilion with an hdmi monitor. theres no speakers or headphones don't jack on the monitor

  Hello:

  Can you go to the "manage audio devices" under the material and audio menu in the control panel and select the integrated sound card?

  I'm sure that when you connect an HDMI cable on a device, the sound from the audio chip in the chip audio hdmi, so see if you can change to the edge and then you should have your sound back.

  The computer has no idea that the device at the other end of the hdmi cable has no audio capabilities and just assumes he did and think he's doing you a favor by automatically switching the audio chips.

• Beats Audio in Windows 8

  Hello...!

  I have

  HP-ENVY 6-1012TX

  Product number: B4Q12PA #UUF

  Operating system: windows 7(64 bit)

  and I want to upgrade to WINDOWS 8 (64-bit),

  but I've seen in this forum and and also with a friend of mine after having installed windows 8 panel AUDIO BEATS just disappears, I mean the driver is not installed.

  so I need help in advance if I have that beats audio Panel and driver (what ever it is) after the installation of windows 8.

  Please guide me carefully because this is my first post and I am new to this thing.

  THANKS in advance...

  Hello

  The 'Beats' audio interface is provided by IDT software installer - upgrade Windows 8 on-site can (but not always) indeed break it, but it can be reinstalled as follows.

  Once the upgrade to Windows 8 is complete, download and install the Chipset driver at the following link.

  Chipset Driver - Windows 8.

  When the installation is complete, restart the laptop.

  When windows has reloaded, download IDT Audio Installer on the link below and save it in your downloads folder.

  IDT Audio Driver - Windows 8.

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When finished, restart the laptop.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K

• I can't hear my audio in windows movie maker preview before AI am editing is intermittent / all thoughts

  I hear my audio in windows movie maker preview before that I'm editing, it sometimes works but only interminently, I know I'm doing something wrong, but he can't know.

  Hello

  
  1. what operating system is installed on the computer?
  2. the problem occur only when you use moviemaker?
  
  The question you posted would be better suited in the Movie Maker forums. View the query in the Movie Maker forums for assistance.
  http://windowslivehelp.com/product.aspx?ProductID=5
   
  Note:  If you are using Windows 7 and Windows Live moviemaker live support forums post.
  
  Hope this information helps.

• Acer E5 problem audio hdmi 571G

  Please tell me why when I connect to a TV with an HDMI cable, I have the video signal, but not his!

  I have the latest driver update(video,audio,all)!

  In (audio) playback devices, Digital Audio (HDMI) (not connected) gray apear and I can ' t change anything! "

  The cable is good because works(video+audio) with another laptop and even TV!

  Help, please! I'm updating the bios, installing and reinstalling drivers... nothing works...

  the last things to try, if you haven't tried to alread:

  Uninstall the Intel drivers and check if the HDMI reading is always there and check if it works

  Uninstall the nvidia drivers and check if the HDMI reading is always there and check if it works

  She has some problem of drivers, but without the cell phone in the hands, it is very difficult to restrict the question.

• No sound - "either Windows Audio and Windows Audio services end Point Builder is not running."

  original title: no sound - Fix he said "either Windows Audio and Windows Audio services end Point Builder is not running."  What should do?

  When I ran Microsoft Fix it for audio, it says that it is unable to solve the problem.  The message was "two windows audio and Windows Audio end Point generator services must run for audio works correctly." At least one of these services is not running. "What should I do now?

  Content in double wire-
  "When I try to use anything related audioi on my computer (volume of the speaker, open iTunes, watch a video), a box appears that reads,"c\Windows\System32\MMDevApi.dll is not designed to run on Windows or it contains an error. " Try to install the program by using the original installation media or contact your system administrator or support software provider. "The mystery is that I have nothing to my computer to ask for that. I have not installed anything new or change the settings. It just started happening. Any advice? »

  Hello

  1. are you able to hear the sound after the error message?

  2. you have an an external sound card or internal, installed on the computer?

  Method 1:

  I suggest you to follow the steps and check.

  (a) click Start

  (b) type services.msc in the search box, and then press enter.

  (c) scroll down to Windows Audio and Windows Audio endpoint builder of Point

  (d) both should be started and set to automatic if one or both are arrested.

  (e) click the name to select it.

  (f) click on restart the service at the top left.

  (g) repeat for both if necessary. If some are not set to automatic, and then double-click the name and on the drop-down list to set the startup type to automatic and apply and ok your way out.

  Method 2:

  I suggest you to run the automated FIXIT from the link below. You can also follow the other steps and check.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Method 3:

  If you have a sound card, I suggest you uninstall the audio driver from the Device Manager and and then install the latest audio driver version from the sound card manufacturer's website.

  To uninstall the Device Manager sound, proceed as described in the link below.

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  Find the audio driver in the list, do a right click and Uninstall.

  You can also download the drivers from the link below.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4:

  If the steps do not help, I also suggest you to run a scan of the System File Checker .

  Click on the link mentioned below for more information about the System File Checker analysis

  http://support.Microsoft.com/kb/929833

  Hope this helps and keep us posted.

• Driver IDT audio in Windows 8.1 for DV6-6140us

  Hi brothers!

  i cant find IDT audio driver Windows 8.1 for DV6-6140us in the website of hp, I'm from Argentina. all solutions? I have no sound in my laptop.

  See if it works...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124991-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0027

• Where are stored audio files Windows 7 (Windows Live alert sounds, etc.)?

  Hello.  I would change one or two of my audio files Windows 7 message alerts (kind of like "You have a message", etc.) and I didn't something like this for a few years and on a latest version of Windows.  Please can someone tell me how and where I store files new sounds and how to install as new alerts?

  Thank you.

  Hello

  
  Audio files of Windows 7 are found in default C:\Windows\Media .
  Follow the steps to edit the audio files of Windows 7.
  
  a: Type change system sounds in the start search box and press ENTER.
  b: now click on the right drop-down list and click Browse, and then select the file you want to edit and click on apply.
  
  Hope that helps.