No noise from TV after connecting to the computer

Similar Questions

• frozen iPod after connecting to the computer

  Original title: device

  I plugged my ipod to computer to load and it is frozen know

  Hi, Jacob,.

  What version of Windows are you using?

  The computer started working, or have you had to make a hard stop?

  If you shut down the computer and the ipod is disconnected, perform a clean boot and see if the problem persists.  Once in the clean boot state, reconnect the ipod.

  Open the Device Manager

  You see a yellow exclamation point or question mark?  If so, see the dos error code

  If not, click on the + next to the device to develop menu

  Right click on the driver, and then select update

  How to perform a clean boot troubleshooting in Windows 8, Windows 7, or Windows Vista - you will find the steps to determine what caused the problem under "additional information."

  http://support.Microsoft.com/kb/929135

  Windows hangs or freezes - Windows 7, Windows 8

• Loss of internet connection after sleep and the computer will not be closed.

  I have a laptop GateWay w / Vista 32 bit OS.  Recently connected to the new internet connection and can connect without a problem.  However, after waking from sleep, the connection is lost, the icon indicates still active connection, can no longer open connection or the computer will restart.  It just hangs and I have to make a hard stop and start again.  If I remive the connection Wireless via safe mode things is back to normal.  However, the cycle repeats when the connection is restored and the computer enters mode "Eve".

  Hi bobert1953,

  This problem can occur when the power management profile turns off your network adapter.

  Method 1: To disable power management feature ent of network cards

  a. click on start

  b. right click on computer

  c. click on manage the

  d. click on Device Manager in the left pane of the window

  e. expand your network card.

  f. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  g. go to the power management tab.

  h. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  i. When you have disabled the boxes, click ok and restart your system. Put the computer in mode 'sleep' and check if you still have any questions.

  Method 2: You're also talking about the steps mentioned in the article below, which deals with a similar question

  After you wake up, a Windows Vista-based computer or a Windows 7 sleep mode or Hibernate computer, the network icon and the speaker in the notification area icon do not show the correct state

  http://support.Microsoft.com/kb/937477

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• put all my pictures from recovery disks 1-2-3 after re buting the computer tried to re install won't let me download them

  put all my pictures from recovery disks 1-2-3 after re buting the computer tried to re install won't let me download them help

  Hello

  Read the results of a problem similar to yours at this link Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/restore-backup-after-clean-installation/2b443d83-BFE9-4601-A055-a10e7ec7e183

  See you soon.

• iPod classic connects to the computer

  Hello

  I have an iPod classic, since 2005.

  It will charge from the grid, but when you plug it into the computer it does nothing... Does not make a noise, does not load... Nothing, only thing that happens is that when you disconnect the computer screen lights illuminates... tried all USB ports, still is not, tried 3 computers, does not work on any...

  so I tried 2 more iPods, an iPod classic in 2004 and it worked fine. Tried an iPod nano of 2007 once again absolutely worked well...

  really annoying me now that I want to sync music on the classic...

  tried resetting the iPod, tried to run in the other mode keeping the home button and menu, press the button home-and play... None of them worked either

  Jake

  When you "recharge sector" (which I assume means an adapter of any), are you using the docking cable that you use with the computer?  When you connect iPod from 2004 and 2007 iPod nano to the computer, you use the same USB docking cable used with the iPod in 2005?

  Is the power supply adapter ("hands") accomplice of old load powering FireWire supported, not USB load?  Accessories older load use FireWire instead of USB charging, which has a different voltage and uses different "pins" on the dock connector.  An iPod from 2005 (probably a 5th generation "video" iPod) to connect to the computer via a USB port, but it can recharge using the USB or FireWire power.

  If you can confirm that the port host USB cable to connect the iPod in 2005 is good, my guess is that the 2005 iPod dock connector will not properly connect to USB power.  It can be worn or damaged.  Therefore, it does not connect to the USB port on the computer.  However, it always connects to FireWire, so she received the adapter (which feeds the FireWire).

  Use a flashlight to look inside the iPod dock connector, to visually check for damage, corrosion, dust or debris.

• Hai, my ipod shuffle when it is connected with the computer, it flashes organge light.  If I don't take no light

  Hai, my ipod shuffle when it is connected with the computer, it flashes orange light.  If I remove without light and music.  Even I kept connected all day with my laptop for charging.  But without success.  Is it possible to change the battery?

  If the shuffle still appears in iTunes when you connect, you can try to do a restore using iTunes, where the cause is a software problem.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  If the problem reoccurs after the restoration, it's probably a battery worn.  Need soldering skills to replace yourself, and iPod shuffle (with the exception of the 1st generation) is very small.  Not easy to work on.  This web site has repair guides

  https://www.iFixit.com/device/iPod_Shuffle

  and parts are available from sources like eBay.

  Apple 'serve' the shuffle, if it's the 4th gen (current type).  Rather than change the battery of your device, you get a replacement unit.  According to this document, out-of-warranty fees are $39

  Pricing of the Service - The Apple iPod Support

  NOTE: If your shuffle is less than one year of the date of purchase, it is under warranty.

  The retail price of a brand new 4th gen iPod shuffle, with new headphones, docking cable and warranty of one year is $ 49.

• Unable to restart or shut down Windows when a USB modem is connected to the computer

  When I plug a USB modem, either 3 G or dial-up, my computer will restart or shut down. It complements the normal stop the procedure, but instead of actually put back in power, the screen becomes black and stay like that. After a manual stop, Windows reports that he is recovered from a serious error. I have had this problem since I first installed Windows Vista about half a year ago. When there are no modems connected to the computer, it restarts and stops normally. In addition, printers and USB flash drives appear not to cause to happen.

  No idea how I could solve this problem? Thank you.

  Works fine now. Another bug of Microsoft.

• BlackBerry smartphone 8330 disconnect in the middle of the synchronization of the Manager Office, but still connected to the computer

  I am a new user.  I love my Blackberry 8330.

  However, yesterday I came across a problem where the 8330 disconnects constantly in the middle of operations with the Desktop Manager.  He does not often occur in one place.  I got several error types: connector specific error 0X80040fb3, cannot synchronize, etc.  Spontaneous disconnects are not confined to the calendar, tasks, or address book - it happened during all these and sometimes before it had even begun to synchronize.  I pulled the battery once.  It synced well after that just to have the same problems the next day.

  This happens in the middle of other operations using the Desktop Manager as well.  As the backup files.  It will shut off in the middle of one of the backup files, or will only stay connected long enough to a backup file.

  In all this, the computer recognizes the blackberry as connected and the blackberry continues to display the "connect to the computer.

  The Start Menu and taskbar will often hang or disappear after that the Desktop Manager ceases to recognize the Blackberry and then the Blackberry is always connected.  Once the Blackberry is disconnected, the start menu and taskbar is released from the hanging or reappears.

  Windows XP

  Office 2007

  Facebook, IheartRadio, Pandora, Slacker, Google Maps and a few other applications installed, Google search, My Verizon

  Also meet a few spontaneous reboots, but I think it has more to do with apps than anything else.  Some JVM 102 errors on restart.

  Feel free to ask me questions.  The Blackberry but frustrated love.  Have tried other things to search through the forum, but none solved the problem.

  JVM 102

  It's your first question, it solve first, probably will solve everything

  I hope that you have at least 1 good backup to restore after

• Start the virtual machine and wait for WF, does not connect to the computer virtual for Vds (Windows 2008 R2)

  Hello

  See a strange problem with only a Windows 2008 R2 model. When you use the built-in function "Start VM and wait" workflow to start a virtual machine (after conversion from a template either manually, or through workflow) NIC of the virtual machine (I tried VMXNET3 and e1000 times) does not connect to the problem. Vds can be replicated in a different VCenter, so spreading the vds. I also created several models of Windows 2008 r2 and all have this problem.

  If the model is converted and started outside VRO, it gets an IP from and is connected to the VDS immediately

  Tried add/remove the NIC of the model

  Tried to move the comments on different hosts

  Tried to create a new template from scratch

  NOTE: Windows 2012 R2 doesn't have this problem in the same circles, the only constant is the Windows 2008 R2 being started by VRO.

  Anyone seen this before?

  I found this article and it fixed my problem VMware KB: registration or the deployment of a virtual computer model fails apparently a fix a problem in ESX 5.1, 5.5 (I used the option to get around and things are good)

• Unable to connect to the computer using wifi

  A got a new Sony HX30V and tried to use the feature "send to the computer. He is able to connect to the wi - fi home and also able to detect the name of the computer to which it is supposed to transfer the photos to. However, during the process to actually connect to the computer, it throws a "network error" after trying for about 30 seconds. I have Windows 8 running on my system. Any ideas how to solve this?

  After spending hours and hours with exactly the same problem, I found the solution. I tried with 2 computers with different OS, 2 different networks, and I read a lot of posts...

  The problem behind it is that you could not transfer images using WIFI while your computer is also connected via WIFI.  Then:

  (1) connect your computer using the connection of the cable to the access point.

  (2) connect the camera via USB to your computer and make sure that the PlayMemories software detects the camera.

  (3) then, unplug the unit and send images to the computer using WIFI.

  If this does not work because the shipment never ends, and then review:

  (1) the battery should not be weak, or if she is then connect the camera to the power supply.

  (2) the distance from the camera to the access point must be short (maximum of 3 meters), otherwise it is too slow.

• Envy 15 t-j100 Select Edition: the device is not connected to the computer. Please insert the authentication device.

  Hello

  So I'm working on a LT desire that has been upgraded from Windows 8.1 to 10 recently and it is this message on the login screen "the device is not connected to the computer. Insert the authentication device. We can't identify what it means or what needs to be done to clear the screen. The user States that the fingerprints of impression of BIO sensor doesn't seem to work either. I looked in the Device Manager, and I see a Synaptics PS sensors (WBF) listed here and is properly installed. I even updated the driver of sensor ep on the support site of the desire, and we still see on the login screen.

  Y at - it no information or help to clear this message?

  We also note that the number on the keypad lock seems to be disabled during startup of windows 10 upwards. Before on windows 8.1 has been activated. Is there any setting to 10 to keep the active number lock.

  The user says if 10 can be made to work well, then we can go back to 7 or 8.

  Please notify.

  Thank you for your time.

  Seems to have been resolved in re - install the software HP Simple pass then go and reconfigure the settings. Message no longer appears on 10. User LT installed with 7 however. Best decision.

• Perform a hard reset when you are connected to the computer?

  Hello

  my iPod Touch G 6 seems to have momentarily buggy so I connected it to the computer, after he had died and needed a charge. He didn't start the loading of the iPod screen, so I did a hard reset while it was still connected to the computer. When he turned his back, I had to enter the password on the iPod to unlock the screen before you start synchronizing with the computer.

  Desire to do harm to the iPod? I accidentally unplugged before ejecting several times, so I'm just scared.

  Thank you

  Jesse

  You have no damage to the iPod. If you disconnect the iPod is communicating with the computer, then you can alter the iPod and a restoration will probably be necessary,

• HP Officejet Pro 8500 A909a: Help on printer display message says: no connection to the computer

  Help on the printer screen says: no connection to the computer, but is connected via a USB cable. Also prints OK, but the HP solutions Center says: ink levels not currently available; iable.

  Well this thread of @greenturtle should help you with Troubleshooting.

  Please let me know if the Solution Center works after doing the above.

• I lost connection on the computer like many light wireless wireless router.

  I've got three Kindle and a laptop computer, more my PC connected

  Original title: I lost my WiFi connection at home in light of the route for the wireless is not lit.

  Hi geraldthorpe,

  Thanks for posting your query in the Microsoft Community. It seems that you have no internet connection on the computer. We can get this fixed number by systematically. It can be frustrating for you. But, don't worry, we're here to help.

  We start with a few questions-

  (1) what is the version of Windows installed on the computer?

  (2) you are able to connect to Internet via LAN cable?

  (3) are other computers at home able to access Internet?

  (4) do you get any error code or error message?

  (5) have you made changes on the computer?

  I would like more information about the issue.

  Method 1-

  As a general rule, if the wireless light is not on the router means that the ability of routers to transmit wireless is lost.

  The router has generally, 4 types of fires.

  Power - number 1

  Test - number 2

  Wireless - number 3

  Internet - number 4

  Numbered LAN are turned on only if a network cable is connected.

  If the computers are connected wirelessly, all the lights except the indicator light should light up.

  I wish you perform a reset and a cycle of power to the router.

  Reset the router-

  You must locate a set PIN size behind the router and press the reset button with a pointed object for 10 seconds. Now, release the button and wait for the lights to come back.

  Note If the wireless light is back on.

  Power cycle-

  I wish that you unplug the router from the power outlet main and plug it back again.

  Check if the problem persists.

  Method 2-

  I would have you look at the article-

  Network convenience stores

  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Method 3-

  I would have you look at the article-

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Wireless and wired network problems

  http://Windows.Microsoft.com/is-is/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  We know if you need help. We will be happy to help you.

  Thank you.