No power to mouse or USB after taking over the vista of the mode standby

Similar Questions

• L540 missing WiFi/BT after activation of the mode standby

  Hello

  I use L540 running Windows 8.1 64bits. After waking from sleep, my Intel(r) Dual Band Wireless-N 7260 does not work. Operating system detects the NIC, but Device Manager shows the exclamation point. Troubleshooting Auto does not work. There are two ways to fix this problem - stop and restart PC or device uninstallation/installation using Device Manager. All the drivers/firmware is up to date.

  Do you have an idea what to do?

  Hi Aleksandarm,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the Wifi does not work after wake up mode standby on your ThinkPad L540.

  Please check is the (allow the computer to turn off this device to save power) is checked, to proceed to the steps you have to go Device Manager expand network adapter and right click on Intel(r) Dual Band Wireless - N 7260 go to properties, click power management and change the setting.

  Can you please provide us with the Dual Band Wireless-N 7260 (R) driver version.

  Please let us know the results once you have completed the steps above.

  Best regards

  Agnes Kumar

• Laptop screen stays black with the mouse cursor only after that comes the HP and Windows logo

  Hi all

  No, my laptop model is HP Pavilion dv6 1337tx. My OS is Windows 7 Home Premium 32 bit. So, today, I shut my laptop down by force by pressing the power button because it did not at this time. Then the next time I turned it the wrong problem started. Whenever I'm on the HP logo sometimes and then the Windows logo comes also. But then the screen stays black and the mouse cursor appears. So, what can be the cause of this problem? I also tried to open with 'safe mode' and 'safe mode with command prompt', but they did not help either.

  Note - I tried the method of discharge after taking off the battery and holding down the power button. He could not help. All LEDS are working properly. I have no extra monitor, so I can't check the display elsewhere. Also, I ran the memory test which shows that everything is fine. Please suggest what I can do now as I can not enter the laptop now. What can be the reason?

  Black screen with blinking cursor:

• After coming from the mode screen resolution problem 'sleep'. Vista SP1

  Hello

  I have a Lenovo laptop 3000 N200 0769-BXG (nVidia 7300). After installing the Vista SP1 a few days ago, I have a problem with my resolution. He switched to 1024 x 768 each time after coming from the mode 'sleep'. My native resolution is 1680 x 1050 and I have to rearrange my icons every time, witch is a bit annoying.

  I have red that it is a problem not only on laptops Lenovo-Vista and I need to install the latest video driver, but I have the latest drivers.

  Can someone help me please?

  Thank you

  Hello

  Here is the downloadlink to the nvidia updated the driver.

  NVIDIA driver

  Let me know if it solves your problem.

• ESXi 5 managing network not automatically start after reboot, or when the output of the mode standby

  vSphere 5.

  ESXi5.

  HI all 5 ESXi installed on HP BL460c G7. HP C7000 Enclouser system connected to the NAC (switch HP series A5800) via the Module HP FlexFabric 10 Gbs. The server has 6 vmcins:

  (1) management network - 2 NIC (1 GB per nic)

  (2) vMotion Network - 2 NIC (1 GB per nic)

  (3) Vitual Machine networks - 2 NIC (2 GB per nic)

  (4) zFCP - 2 network cards (6 GB per nic)

  After you restart or when the output of the mode standby, the management network starts does not automatically, you need to restart manually from the console directly. Hypervisor ISO downloaded directly from the vmware Download Center and all the recommended HP drivers downloaded and installed from HP Download Center.

  OK, another thing you could try is this change that HP recommended for my situation. The CLI performs: esxcfg-module - s "heap_max = 20971520" be2net

  and reboot. The memory default chunk size is not large enough and will change to this size in the next version of the driver.

  Also, have you tried yet 5.0 U1? There are a lot of bugs in U1.

• connect with the windows computer using usb after connecting to the wireless mac

  Printer HP Photosmart 7520 connected wireless to the new iMac using Fios router wireless.

  Can I connect the printer even to an old Windows computer (running XP) via USB without interfering with the connection Wireless for Mac?

  Hi Rekjek,

  On both wireless and USB is allowed. There should not be all the problems between the Mac and the PC using the same printer.

• Win 7 x 64: No. WWAN after the resumption of the mode standby and Bluetooth turned off

  Hey guys,.

  I had this problem for a few weeks 1-2, after the exit of the mode ensures my WWAN - the Sony Ericsson 3507g - modem is invisible and my Bluetooth is disabled.

  WWAN: the light is off, there is no switch on the screen Fn + F5 and power off/on with the hardware switch does nothing either, after a reboot, that everything is back to normal again until you go back to sleep. A few days ago he suddenly perfectly well but when I had to restart, the problem is back.

  Bluetooth: the adapter is always disabled after sleep and sometimes after a reboot, I can not find a model to know when this happens exactly... but I have since my WWAN modem is upward I can't help but wonder if it has the same cause...

  I already did a complete new installation of Windows 7 Home Premium x 64 today and I'm under the latest Vista drivers, because those who do not work with the Ericsson Wireless Manager Windows 7, they ran flawlessly for a few weeks, so that they should not be the problem...

  BOT of the above issues is dealbreakers for me because I'm using WWAN all the time and I use a Bluetooth mouse... then... Please help me ;-)

  Thank you in advance,

  Stefan

  I think I found the culprit: the last time I had this problem I didn't know what was the reason.

  After that the above post I got it works fine until recently it suddenly reappeared without having done me anything (Finally, I've done something, but I couldn't understand that).

  I installed a few games, but nothing about the wwan adapter.

  I also had the same problem to launch a vanilla Ubuntu 9.10 x 64.

  Finally it dawned on me that, just as the problem the first time, I had also installed Ubuntu. I think that something about the way that Ubuntu handles the umts modem makes it behave this way.

  This time (since I seen Ubuntu as the reason yet and I couldn't understand anything more), I opened the Thinkpad and looked for clues as to why this was happening - loose cables and all that - but nothing was wrong. I also disconnected the small backup battery for a few minutes to reset all the BIOS (except the part that is not volatile of course) - who probably had the same effect as turn off/turn on the modem I/O on-screen that solved the problem last time.

  Then, I rebooted, entered the BIOS, responsible for the default installation with F9 and it suited my needs. Since then he has worked flawlessly again...

  I'm not sure that Ubuntu bad, but it's the only logical explanation, and I think that's the reason why some mistreatment of the modem which required a "reset" on the base material, it is why a complete reinstallation of Windows did not do one thing...

  For now, I can just advise all users T500 WWAN to avoid Linux - Ubuntu, especially - at least until understand you what causes the strange behavior.

  Just my 50 ct other people with the same problem so some ideas on how to solve this problem.

  Stefan

• Satellite L775 - 18Q - nothing works after having used the mode of intel

  Hi all

  I own a Satellite L770/L775 18 Q.

  Problem is that the screen remains black, no HD playback, nothing happens
  It all started with when I installed the program intel turbo boost should not do I guess.

  Looks like that the bios is corrupted or some thing, I don't quite know because nothing works, not with either F2.
  I know that my laptop is still under warranty, but perhaps it can be fixed somehow.

  Please, I beg you.

  Greetings
  Fred

  I doubt that an installation of an application, the driver or the software would result in such issue eventually it s simply a bad luck that happened after the Intel Turbo boos installation

  So I recommend workaround short but if this fails, don t lose any time and get in touch with the Toshiba ASP in your country for this problem under warranty conditions.

  + Workaround: +.
  Remove the battery and AC adapter
  Wait a few minutes (30 min)
  Then press the power button / stop along 30 sec
  Now connect the battery and the AC adapter and press the power button to turn on the unit.

• SP U400 - cannot return to the desktop after entering in the mode 'sleep' by closing the lid

  Satellite Pro U400 V-11 I used for a week. I don't know if this is a problem or I did something wrong. My setting of closing the lid is recording mode "Eve" in Vista.

  When I close the lid and open a few minutes later it's ok, I see the password login screen. But if the computer is in "sleep" for a while it does not return to the office when I lift the lid. The screen is black. Fan started working then quiet several times.

  The first three LEDs on the left are green. Keyboard does not respond. And also switch / stop does not work either I press once on or hold it. And only after I unplug the power adapter and press the power, it works. But it restarts the system and Windows could not close correctly the error message is displayed.

  Is this normal or something wrong with the mode 'sleep'?
  Thank you

  Hello

  I read on some of the similar problems regarding "standby" mode and the black screen.
  Someone suggested to update the BIOS and the display driver

  So I highly recommend it too much
  See the European driver of Toshiba page, choose the model right for laptop and try to update the BIOS, then the display driver.

  Reboot the laptop and see if the problem still occurs.

  Good luck

• Satellite P850-30W - the fan does not work after returning from the mode "Eve"

  I have a Toshiba Satellite P850 30W with bios 1.90.

  Sometimes the fan does not work at all after back mode standby on windows 7.
  What happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  Normally the fan starts to run when the CPU gets more than 50 degrees celsius and stops less than 50 celisus...

  I tried running Prime95 when this fan-this occurs and the time of the computer got dangerously high (near 100 degrees)! the fan did not start at all
  .. .This error could damage the laptop potentinally...
  to get the fan turns once again I have to restart windows

  anyone experienced this?
  I guess that the fix would be to never use standby... or toshiba needs to fix it with an update of the bios.

  > Sometimes the fan does not work at all after back mode standby on windows 7.
  > What has happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  You said it's happened twice and only sometimes done this means that above all the fans are working well?
  In this case, this would mean that it of difficult to reproduce this problem, but you might be right: maybe a BIOS update would help solve this problem permanently

  I found some discussions on the stand-by mode and fan activity and in most cases, the update of the BIOS was the key.

• Tablet Wacom nonfunctional after the awakening of the mode standby

  I have Windows 8,

  Dual core 2.8 ghz intel, 8 GB of ram.

  I use a Wacom Bamboo (ctl 471) splash tablet.

  I installed the latest windows drivers 8 Wacom.

  When my computer wakes from sleep mode, the Tablet no longer works.

  I have to restart the computer to make it work.

  That kind of defeats the whole purpose of the mode 'sleep'.

  Any ideas?

  Hi eingram,

  Thank you for choosing Windows 8 and for giving us the opportunity to help you.

  I understand that the tablet will not work after waking from sleep. I will try to help you with this.

  (1) did you make any changes before the show?

  (2) you receive an error message/code?

  Method 1: I would uninstall drivers and reinstall them.

  a. open the key Device Manager by pressing Windows + R and type Devmgmt.msc

  (b) display or touch drivers.

  c. Please, right click and try to uninstall the driver.

  d. restart the computer and the update.

  Run the troubleshooter of material and check.

  Method 2: Follow the steps to run the Troubleshooter:

  a. press Windows + C keys on your keyboard to show the charms.

  b. type troubleshooting, and then click solving problems under settings.

  c. now, type Hardware Troubleshooter in the search option.

  d. click convenience hardware store to run the troubleshooter.

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Click of the mouse stops working after you start the first application

  Hard to explain this problem.  First time I click on what either in an application after computer startup (Word, Excel, etc.) the arrow of the mouse moves, but the click does not, anywhere, not on the desktop, taskbar anywhere.  Accentuates not delayed anything either.  But when I press ctrl-alt-delete, move the arrow down to start the Task Manager and click here, then click Start to work and things get even once highlighted and everything seems normal.  HP Pavilion dv9000t Vista Home Premium 32-bit Intel Core 2 duo, 2 GHz, 2GBDDR, this is going on for about 6 months now.  I just noticed, I installed a trackball logitek, and after installation, it does the same thing.

  Hello

  ·         What is the brand and model of the computer or the mouse?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to run the Microsoft fixit from link and check mentioned below.

   

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   

  Method 2: I suggest you to check and clean the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Let us know the results.

• power adapter light turns off after plugging in the Inspiron notebook (5523)

  I have an Inspiron 5523, and it was working fine, until early today. I went to plug the thing to do, and it would not charge. Instead, the light on the power supply unit to the adapter stops, or would flicker. This happened with 2 load cables. I'm looking at a motherboard dead, or something else?

  Hello N108bg

  Please write to us.

  If the light on the adapter stops when it is connected to the machine, we look at a dead motherboard.

  Let us know if the system is under warranty, we will have repaired.

  Concerning

  Hema

• GUI crashed after taking over macbook to sleep

  Hello

  After that I went back to my macbook and the machine woke up, demand to merge GUI crashed on me and wanted to send a problem report to Apple.

  (See attachment)

  At the point where I had 4 running virtual machines and they are all very well and always running, it was only the GUI that was a problem.

  I point out that I was bad and he uses the debug version no of demand for exhibition of Fusion.

  If all goes well, there are still enough information to track it down.

  --

  Wil

  Hi again Wil,

  Current indications are that this is likely to be a default Mac OS with a very low rate of occurrence.  We would be very interested to hear if it turns out be a problem that you can reproduce again with the merger... And if reproduce you it, please consider also this button send to Apple fun while Apple Gets a direct report of the show.

  See you soon,.

  --

  Darius

• Qosmio G30-126 - black screen after the awakening of the mode standby

  Hello

  If I just put my Qosmio G30 - 126 mode (button or just close the housing cover) sleep it start back only with black screen. HD is being run but nothing else. I have to turn it off and start again with the start-up. Of course come screen with menu to speak of a problem... Don't have pictures. The resolution is minimum, I have to change.

  I'm please that reinstallation of the system, it's not what can solve problems.
  My question who will pay the time if she will not solve the problems, they said that it will be in all cases.

  Why I bought the warranty?

  PS. Admin confirms my messages...

  Post edited by: ADMIN

  Found this thread and I would like to share my knowledge with your
  I had a similar problem several months ago on my laptop with the XP operating system preinstalled.

  The MS patch KB917332 helped.

  [The monitor does not light when you move the mouse or press a key after you have configured the 'Power Options' settings on a Windows XP SP2 laptop | http://support.microsoft.com/kb/917332]

  See you soon