OfficeJet Pro 8620:2 - back printing on HP 8620

Similar Questions

• HP Officejet Pro 8620: Selection easy printing on tray 1 or 2

  We have an Officejet Pro 8620 with extra paper tray. Tray 1 for Virgin paper, tray 2 for the paper with the logo of the company.

  Now, when we want to print to tray 2, we reject Tray 1, whereas, after a few attempts the software switches to tray 2 and printing begins.

  It is possible, before printing, to change the setting in the software, select printing for tray 2. But it's pretty heavy.

  We want an easy way to select printing for Tray 1 or the tiroir2. For example, as seen in other environments, so that we can choose to print on:

  -HP Officejet Pro 8620 (Tray 1) or

  -HP Officejet Pro 8620 (tray 2)

  This could be seen as a separate printers. How can we achieve this?

  Change the setting every time, is not a good option. In addition, we have other software that we want to configure so that they automatically print to the correct bin.

  Thank you!

  Hello @Sing020,

  Welcome to the Forums of HP Support!
  
  I would like to help you today with the addition of two copies of your HP Officejet Pro 8620 e-all-in-one printer to your Windows 7 computer to make impression on tray 1 and 2 of the State Bar an easier process for you. Can I please you follow the steps below.

  1. click on the Start menu

  2. Select devices and printers

  3. in the devices folder and printers, you should see your printer HP Officejet 8620 installation

  • Before you continue, we must determine how your printer is connected. If you have a printer Wireless HP Officejet 8620, on the front panel of your printer, tap the Setup button.  Select Network Configuration. Select the wireless settings. Touch Wireless details. Make a note of the IP address.
  • If you have the cable plugged USB printer please right click on the HP Officejet 8620 under the printers and devices folder and click on printer properties. Click the Ports Look under the list of Ports for the port selected for your printer. There should be a check mark next to one of the USB ports. If you move your mouse over the Port is expected to show you the full name (USB 0001, 0002 USB, USB 0003, etc.). Note the number of USB Port.

  4. then right click on the HP Officejet 8620 which shows currently installed on your computer. Left click on Printing Preferences.

  5. on the paper/quality tab, select the paper sizeand tray (Tray 1) .

  6. click on apply and OK

  7. right click on the HP Officejet 8620 last once and click on Printing Preferences. On the general tab, you should be able to add (Tray 1) at the end of the name of your printer.

  8. click apply and then OK to save the changes.

  9. now, must be added in the second copy of your printer. Please close devices and printers for a moment.

  10. click on the Start menu

  11. in "search programs and files" box located just above start type % temp % and press enter on your keyboard

  12. when the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.

  13. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.

  14. close the Temp folder when it is empty

  15. right-click the recycling bin on your desktop and select empty recycling bin

  16. click here to download the driver Officejet 8620

  17. when the download is complete extraction will occur and may open an install window. If an installation window opens, Please close it.

  18. click on the Start menu

  19. in the box "search programs and files" type folder and press enter

  20. when the Temp folder opens, find the file 7z. Click once 7z folder to open it , it

  21. at the top of the page, you will see the path to the file. It should show something like: Local C - users - AppData - Local - Temp-7z drive... Left click on the right side of this bar of the file path. All that will now highlight in the path of the file. Right-click on the path of the file to highlight then copy it.

  22. close the Temp folder

  23. click on the Start menu

  24 click on devices and printers

  25 click on Add a printer in the top

  26. click Add a local printer and click Next

  27. click on use an existing Port. Click the menu drop down and choose the exact same port that your HP's Officejet 8620 at current address is installed on. Press Next.

  28. If you are brought to a list of manufacturers and Printers, click disk , at the bottom right. Right click on the bar of path of file in the window "install from disk" and "Paste" in the path of the file we copied previously

  29 press on Next to complete the process of adding

  30. Once you are taken back to the devices window and normal printers, you should see two copies of your installed HP Officejet. If you see only a single copy, your computer can be grouped under the same icon. Make a right click on the HP Officejet see you and now need arrows next to the options (options print, the print properties, etc.). If you click on the arrows, you will see two copies of your printer.

  

  31. right click on the HP Officejet 8620 we set up for tray 2

  32. left click on Printing Preferences

  33. click the paper/quality tab

  34 select the paper in tray 2 trayand set the paper size

  35. click on apply and OK

  36. you can right click on your HP Officejet one more time and select printer properties.

  37. rename this copy to HP Officejet 8620 (tray 2)

  38. click on apply and OK

  Now when you try to print, when you select the file and print , you'll see a Tray 1 and a copy of your HP Officejet tray 2 . Simply choose the copy that corresponds to the status bar you want to print from.

  Please let me know if the steps I have provided to resolve your problem. It may seem like there are a lot of steps, but it's really an easy process. I wanted to give you as much detail as possible for scenarios that may occur. Good luck!

• HP Officejet Pro 8620: HP OJ Pro 8620 print several reports of unwanted situation

  I have a HP Officejet Pro 8620 and twice, it will print several reports on the State printer unwanted. Last night he printed 12 reports on the State and outside that of the total number of printed pages changingon the report, progress reports are the same.

  The printer is on a network, especially with Mac OS, but I have a laptop Windows 10.

  I tried the recommendations of the previous posts to run Doc Scan but this so far have found nothing wrong and has not solved printing unwanted status reports. Report added below printer if it helps.

  Any help would be greatly appreciated.

  

  Hey @Dan0181,

  Welcome to the Forums of HP Support!

  I see that your printer Officejet 8620 e-all-in One prints a lot of status reports. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once, while the printer is on, remove the power cord at the back of the printer for one minute. Then, please let me know if you print when beginning status reports or if they start themselves as well as if there are no messages on the printer when trying to print. Once I know more than I should be better able to help.

  Please let me know if the above prevented printing reports. In the affirmative, please let me know by clicking on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• OfficeJet Pro 8620:8620 all in one printer color printing incorrect, even if the quality is good on tests

  My printer is only about a year and I had no problem with him until more recently. I only use hp ink cartridges. It prints color orange when I want to print the colors pink and Red/pink when I want to print Brown. Most of the other colors print normally. I cleaned the print head, which does not help at all and made a print quality test, each test to come out totally fine. Colors are not dimmed, there are no missing lines or anything like that, it's just printing wrong colors from time to time, as on some documents. Any suggestions?

  Hi @mcorinn,

  Welcome to the Forums of HP Support!

  I see that you experience problems printing some documents with your HP Officejet Pro 8620 printer in Mac OS X 10.6. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration you feel. There could be corruption in the files/application on the Mac or a problem with the printer driver. If the 'print quality test' report print correctly, this is not a hardware problem.

  Are you able to print from TextEdit? What were the results?

  If some documents are the problem, they could be corrupted.

  What application you are printing from?

  Try to create a new document with the color to see if it prints correctly. What were the results?

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• OfficeJet pro 8620 e: Printer Control Progra

  When I first installed this printer about 2 months ago I had a program on my computer that all I had to do was click on scan, difficulty settings, and then select scan and it should scan.  Somehow, I don't have this option anymore.  I want to be able to sit at my desk and control the scan from there.  What should I do?

  Hello @Doris422!

  Thanks for posting on the HP Forums!

  I would be more then happy to help you with regard to the analysis of the computer.  The program you are talking about seems much analysis of the HP.  The first thing I recommend is to search the Windows 8 for HP Scan computer.  The best way to do this is to open your Start Menu and start typing the HP scanning.  The computer will automatically find it and it should appear as the first option.  Open it and see if you can start a new search.

  If this does not happen and HP Scan is not the case in sight so I recommend you to uninstall the HP software. Once the uninstall is complete, it would be wise to perform a cleanup of the computer disk. A disk cleanup will improve the performance of the computer and remove the temporary files that may cause problems during the installation of the software. Once disk cleanup you must restart the computer and reinstall the HP software.  The software that you re - install will include scanning HP.

  To uninstall the HP software, click here: uninstall the HP software

  To perform a disk cleanup, click here: perform a disk cleanup

  To download the HP software, click here: HP Officejet Pro 8620 full feature software and drivers

  If you please, after back and let me know how everything goes

• OfficeJet Pro 8620: Can the 8620 Pro Officejet print 2 sides legal?

  The question is in the subject line. The specifications of the officejet pro 8620 indicate duplex printing functions, but is able to print double-sided legal (8.5 x 14) as well as the standard 8.5 x 11?

  I've already printed double-sided with an 8.5 x 11 sheet of paper, but still to face a compatibility error when you attempt to print both sides of a sheet of legal paper size (which I use quite often). Can this printer, printing of 8620 officejet front and back of a sheet of legal (8.5 x 14) paper?

  I tried to print one side first, and then put the paper in the tray to print the other side and the results have been frustrating to say the least. Some leaves will turn out fine, but sometimes the printer (which is only a few days out of the box) will take several sheets of paper (up to 5 simultaneously) and spread them just enough to ruin every one of them.

  Suggestions?

  The 8620 cannot print 11 x 14 in duplex mode.

  Also check the firmware 8620, FDP1CN1502AR is the current with an update "improved reliability in the paper path.

• HP OfficeJet Pro 8620: RDP 8620 Officejet prints strange lines

  I tried to find an answer to this for almost a month.

  We have a HP Officejet Pro 8620 and we want to be able to print from a remote computer to ours. The printer is shared.  We'll call the local computer pc1 and the computer remote pc2. PC1 remotes in pc2 using a standard Windows 7 Remote Desktop connection. PC1 sharing their printer with pc2 by redirect. the sharing of each resource to which is connected to it. PC1 is trying to print, and then waits. The printer that is connected to the pc1 via USB cable gives us a message that looks like this of course is not what we want when we try to print an Excel worksheet. No, this is not the complete document. This is the first 1/3 or the page and the rest is completely white. It almost looks like a code any. I installed the drivers on ppc1 both pc2. I tried the drivers universal instaslling. I was told that get this work 4 years ago was very easy, but I could not crack. Any advice or assistance would be greatly appreciated.

  Problem has been resolved by the default driver. Has not reappeared since we have updated for the generic driver for 8600. Had to install the driver on the two machines.

• HP Officejet Pro 8620 does not print, but the document is sent to the printer without error

  I bought a HP Officejet Pro 8620 and connect 2 computers via a wireless connection with the latest driver.
  In the first computer (windows 7) I can print without any problem
  On the second one (windows 8), when I try to print, I can see in the windows printer spooler file that I'm going to print. The file is sent to the printer, without error, BUT nothing happens.
  I already tried reinstalling the drivers, restart the computer, the printer. I tried to connect to a wired network. It still does not. It's very weird but I got no error, just does not print. I thought that the printer does not work, but on the second computer I can print.
  Thank you for your advice

  Hello

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

• New OfficeJet Pro 8620 does not print PDF files

  I have a brand new 8620 and I use Windows 7. My printer prints a few PDFs but not most other PDF documents. I am using Acrobat Reader XI. The printer will print from MS Office.

  HELP, please!

  Hello! Welcome to the @lmel forums

  I have a few ideas that come to mind, I read the issue you're having with printing of PDF files. They are here!

  1. try to resave the PDF files that do not print and then try printing again.

  2. update of Adobe:

  Select help - search for updates. If a new update is available, it installs automatically.
  Once installed, you can restart a computer.
  Then try to print the PDF file.
  
  http://helpx.Adobe.com/Acrobat/KB/troubleshoot-PDF-printing-Acrobat-Reader.html

  3. run the print and scan the doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results.

  4. uninstalling the printer software

  Restart the PC

  Reinstall the printer: HP Officejet Pro 8620 e-all-in-One Printer series full feature software and drivers

  That should do the trick! Keep me abreast of the results!

  Have a great Wednesday

• HP Officejet Pro 8620: HP Officejet Pro 8620Print will not print oversized envelopes

  I thought I had followed the instructions allegedly simple re plug my new printer HP Officejet Pro 8620 in turn. Something to do with the connection via ethernet? I plugged it with a money USB cord.

  Then, when I tried to print something printable HP, the site does not recognize or find my printer.

  I also can't seem to print envelopes of various sizes. The instructions to keep your printer drivers on the evolution of the saying.

  Can you please help? The saleswoman of Staples said it would be easy. HAH!

  Thank you for your time and let me ride my rants. I enjoy your site and it.

  Hello

  HP pads are only available in the network connection, and no USB connection.

  To connect the printer to the network yoru connect it to your router wirelessly or through an Ethernet cable to any of the router LAN port, then you can activate printable HP.

  You must reconfigure the printer by opening the HP Officejet Pro 8620 software, and then click the utilities tab.

  Click Printer Setup and software and follow the steps to connect to a network printer.

  To set a custom size support size envelope follow these steps to configure the size within the confiugration forms your system, then the size configured support will be available in the print driver.

  You can follow these steps to set a medium size custo:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8610/8620/8630-e-all-in-one-printer-series/5367611/model/5367613/document/c03890386/

  Note that the printer supports a size order of 76 to 216 mm (3.0 to 8.5 inches) wide and 127 to 356 mm (5.0 to 14.0 inches) long. any value higher or lower is not supported and is not listed by the print driver.

  Shlomi

• OfficeJet Pro 8620: Question of impression WYSIWYG - alt - ñ characters printed in index with Windows 10

  Right out of the gate, I see 10 Windows isn't an option of operating system for the advice of the forum.  I have upgraded to Windows 10, bought a new HP OfficeJet Pro 8620 for its digitization, fax features.  I'm doing some legal work and have lawyers and clients who have Spanish names - I use "n" quite often.  This character is printed in the index, what's not worked for me.

  I noticed the same thing happening with my color HP LaserJet 200 M251.  When I choose printers, the color laserjet printer gives me a PCL driver option and it solves the problem.  There is no option with the OfficeJet Pro 8620.  I downloaded and installed the latest updates of pilot on both printers and it is always the case.  I feel like it is a bug of Windows 10 - someone ' one knows how to fix this?

  It's the police, my default is an old TrueType font supplied with my first HP LaserJet printer: CGTimes.  I think it is bolder and sharper than his nearest police, Times New Roman.  I'll have to give up CGTimes.  Thank you for your help.

• HP Officejet Pro 8620: My HP Officejet Pro 8620 ceased printing in Mac OS x.

  I bought my HP Officejet Pro 8620 less than 6 months ago. It started making a grinding noise as it printed. Then he said that he is weak on cyan. Then it stopped printing because cyan has been exhausted. I bought today new cyan. I put it in and now it says "there is a problem with the printer or ink system. If the problem persists, contact HP. "I tried many suggestions for more than 2 hours. I opened the truck and looked for paper. None. When I tried to download the software, it says "something wrong with your device. Device is in an error state and cannot be reflashed because of this. Fix the problem and try again. »

  I tried to use e-print but has ended up keeping the usb connection.

  I can't touch the printer Panel because he is stuck on "Printer Failure" and no areas are in view to start other than turn the printer and the switch by unplugging the power cord. How to solve the problem? Thank you.

  Hello! Welcome to the @PBL1 forums

  I saw your post on printer failure message that you now face on your Officejet 8620. I want to suggest to look in the guide below to try a reset power and if the problem persists, please call as you would probably need a replacement printer.

  ""Problem with print head,""printer failure,"'Ink system failure,' or a ' 0 x ' r a 'C2 '.... "Error Message appears on the printer control panel

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  All the best,

• Print via NFC on Officejet Pro 8620 e with mobile phone samsung Galaxy S3

  Then this printer officejet pro 8620 e, which built in NFC impression of Samsung Galaxy S3 which has turned on NFC?

  With NFC lit on samsung S3 and phone close and press the button of the NFC on the HP printer, nothing happens.

  This printer has NFC that oppose the 8610 pro model and so am disappointed it doesn't work with this camera and probably none except HP devices a device.

  Specifications of the HP product sell the printer with NFC but don't say in plain English that it is available for an Hp product.

• OfficeJet Pro 8620: Print borderless with Officejet Pro 8620

  Hello

  I recently bought a hp OfficeJet Pro 8620 and I'm testing now a few important functions for my business. One of them is printing without margins of leaflets in A4 format. But the problem is: even if I chose "A4 borderless" paper size and "photo paper" like paper it always prints a white border around entire page--so he is not chosen in the menu borderless printing. The flyers that I want to print all pdf format and print them with a program called "document viewer", but using another program for printing without margins such as gimp makes no difference!

  By the way: I'm (Lubuntu 16.04) Linux as an operating system, the printer is connected via usb and the driver that I use is "HP Officejet Pro 8620, hpcups 3.16.3.

  Please help me to find a solution to this huge problem, because printing flyers for my small business is one of the most important reasons I bought this printer for and I urgently need print flyers (without borders) for the weekend too.

  Thanks in advance!

  Hello everyone,

  It's me again. Yesterday, I solved the "problem".  The problem is that the image of the pdf file that I wanted to print without borders had the size 210 x 297 mm (A4), but I had to larger scale to 214.5 x 300 mm, 9 mm up to what he had the correct size for printing without margins (A4).

  Unfortunately, these strange dimensions does not exactly appear in the dialog box size media in settings print HP Tools program but rather to the dialogue of the PDF Viewer, if you select the paper type and paper size. I do not understand this, but I finally works, and that's all I wanted. In any case thanks for trying to help me!

• HP Officejet Pro 8620: iPad connects to the printer

  My iPad 2 Air do not print to my HP Officejet Pro 8620 although my iPhone 6 prints very well so I don't know the connection Internet is good and the printer works

  Hello

  He recently lost connection or is this the first time you tried?
  
  Try to restart your iPad look - it's a simple solution that sometimes allows to restore the connection to the printer.
  
  Other things to check would be that there has been no recent changes to the wifi password.