Paper size small with c410

Similar Questions

• How can I create custom with the Photosmart 6510 printers paper sizes

  I want to use paper sizes personalized with Word or Photoshop.

  I have a Photosmart 6510 printer all-in-one.

  While I can find the custom size tab layout in Word and can set this size, I don't seem to be able give the new size a name or save it.

  Is it possible with this printer, or is there a workaround to avoid the message 'paper mismatch '.

  Thanks for the ay help I can get.

  I'm sorry not to come back earlier.  I stumbled across a work around for this problem.  Use a different print driver for the printer.  I'll link the instructions below.  Again, sorry I don't come back with the workaround as soon as possible.

  How to assign other drivers to print in different Versions of Windows

• hp7500a custom paper sizes

  Just installed cart wide Hp 7500 has and cannot find the custom paper size settings.

  Running Windows 7, 32-bit, connected directly to the router.

  I'm trying to print 12 x 18 paper architecture check together on plain paper. No problem with the previous Hp7000.

  Please tell me that you can print formats customized Hp7500A.

  You can print on paper sizes personalized with the 7500 a, but you'll need assign the printer to use and the other print driver to do. I'll link the instructions below. Let me know what happens.

  How to assign other drivers to print in different Versions of Windows

• Personalized with Deskjet 4620 paper sizes

  Hi all!

  I currently have problems printing to a custom on my Deskjet 4620 size document.  In my country, the legal size is measured in 8.5 "x 13".  Unfortunately my printer does not support custom paper size print.

  I tried you are looking for a room and speak to an agent of technical support, but the closer, I went to a solution uses a 6980 driver - who has done print legal paper with the correct margins, BUT screwed up the colors (ie. in Photoshop and MS PPT, it prints images colored B & W ones).

  Can someone help me with this? I thank very you much in advance!

  Right click on the printer in the Printers folder and select Printing Preferences. Set the size of the page to legal... 8.5x13 is a standard size for legal. It should not need to set a custom size

• M651dn: with manual duplex printing only the paper size custom

  Hello

  I have a strange problem with several HP printers in my office (cp4525dn, 401dne, M651dn).

  Automatic duplex printing works as usual if I use plain paper A4 format.

  But when I use a custom paper size (21 x 21 cm), then the 'duplex manual' appears on the screen with the information I need to deliver the document again.

  It's strange. -That someone has an idea if this could be a bug or it's 'normal '. But automatic duplex should work too much here, I think. What you mean?

  It makes no difference if or USB-connected to the local network. I also tried different drivers, without success.

  Thank you very much

  Daniel

  According to the manual the User Guide Laserjet Pro 400 M401 , automatic duplex printing is not supported for custom paper sizes.

  

  It goes the same for my printer LaserJet Pro 400 MFP M475dn .

  I guess the same applies also to CP4525dn and M651dn models.

• Custom with iPF 8400 paper size problem

  I created a custom paper size of 11 x 14 inches for my new IPI 8400. My file is 11 x 14 size and print perfectly on my Pro 100, but when I send it to the 8400 it cut a full inch of my image, send me 3 normal small borders and a big. I tried to re-sizing of the image to 10.75 x 13.75 inches, and it still cuts a full inch of the image. Verification of image on the main page does not change, nor is the page. Printing from PS CC, win 10. Am I missing something here - just may not understand what?

  Hi mk1051,

  It is recommended that you contact technical support direct assistance.  There is NO charge for this call.  Please call 1-800-423-2366, Monday to Friday 08:00 to 08:00 pm et, except holidays.

• trying to set up the printer to print files with a half higher or lower from standard paper size.

  Try to configure the printer to print images or files size (5 x 8) on half higher or lower standard paper of 8 1/2 "x 11".  Need to rotate 90 degrees.

  Thanks in advance for any ideas.

  Hello Michael,

  Thanks for posting your concern in the Microsoft Community. Let me help you.

  To be able to provide you with a better idea on how to change the print size, tell us a little more details on money issues.

  • How you want to print? Is it through any program or application or any web browser in Windows?
  • What is the brand and model of the printer that you are using?

  As a recommendation, I suggest to try the options in printing preferences in Windows and check if it helps. Follow the steps below.

  1. Open devices and printers.

  2. Right-click the printer you want to use, and then click Printing Preferences.

  3. Make the appropriate choice for the paper or paper size option

  Ref: choose printing options

  Write to us again for assistance.

  Thank you.

• I'm scanning in legal size docs. with my printer/scan/fax. The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.

  I have a new HP with Windows 7.  I'm scanning in legal size docs. with my printer/scan/fax.  The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.  I could do this on my old XP computer.  Microsoft forgot add parameters of legal size in this application?

  Hello notnewbee,

  Thanks for posting on the Microsoft answers Forum.

  You do not give the model of your printer/scanner/fax machine so I can't direct you to the website of the manufacturer of specifc. However, I would
  you go to the website of the manufacturer of your printer and download the latest drivers for Windows 7. Sometimes, if you use a driver that is not intended for your operating system, then your device can operate and install, but some features may not work.

  If they do not have an updated driver, then try the compatibility mode for Windows XP and see if your printer will work correctly.
  The information below will show you how you can make older programs run on Windows 7 here.

  If please reply back and let us know if this helps solve your problem or if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• problem with the HP 7310 - incorrect paper size fax

  I have a hp 7310 printer/fax/copyer and everything that he was working great until that earlier

  fax work perfect until we started to get a paper size incorrect message when receive us a fax

  We set it up to 4 rings

  We also have a fax set up report

  I tried different formats (as well as in setting up fron a4, letter, legal)

  even tried different weight

  nothing seams to fix the problem

  Thus, when receive us a fax, it rings 4 times... print a blank page... stop and it says wrong paper size... If you press ok, it prints the fax and fax report

  any ideas?

  don't know if it's a part of it as well when we're going to copy something the scaner it going long stubborn to scan... like 5 min it will print the item which has been fine scanded

  Thank you

  anyone until we change our all hp printers out for new... it will not a hp after that

• Change paper size problem

  Hello. I am writing from Japan.

  My question is about printing.
  I mainly use A4 size paper, but sometimes use B5.
  B5 is a paper based on Japanese traditional paper format.
  The A4 is now major in the Japan, B5 is always used
  and I sometimes print with paper B5 and bind to the B5 file.
  B5 is smaller than the A4, but size 1: 1.4 ratio the same as A4.

  Now, the problem is:
  "Although I change the paper size of the preview window,
  the change will be not taken into account immediately
  and I have to print at least one page with the old settings to set the change. »

  I am so happy if solve you this problem. It'll be more useful.
  Or, you can tell me another good solution or how to change the settings?

  Thank you very much.

  Use the {Ctrl + P} keyboard command for printing, in order to circumvent the preview before printing.

  Bug 1007779 has been filed on the button print, preview printing opening rather then goes directly to the print dialog box.

• minimum height of paper ip8720 in the custom paper sizes

  With the help of ip8720, when I set the height to 4.25 in custom paper size the image does not print correctly. If I leave the printer set the margins, I get the message «the limits of paper as defined by the PPD file size are a minimum height of 5 inches...» "If I set the margins mysself (to 0) part of the image is printed in a corner, not there at - there no way to print with a 4.25 inches paper size?  I could do with my old Canon printer. The reason why I need to this size, it's that I'm trying to print a photo on the bottom half of the book which is actually 5.5 wide and 8.5 high. I need only on the bottom so that I can then fold paper to make a card with the image on the widthx height 5.5 before - so 4.25 will not work in this case... the height must be 4,25 and width of 5.5 inches. Thanks for any ideas you may have. (I use an iMac).

  Hello.

  The minimum supported size is 3.5 inches wide by 5 inches high.  If the height is specified as something more smaller than 5 inches it will not print to avoid paper jams or feeding problems in case the book is actually less than 5 inches high.

  If you need additional information, find more help contact us.

• Photosmart 5510: customer paper size

  Hello world

  I have never posted on a forum before, but I'm about to have a magma down! I try to print my wedding invitation. they are a custom size of 19.7x13.9 cm., I tried to add the custom paper size by following the instructions on the other posts, but this has not worked. paper/output is missing from the advanced settings.

  help would be greatly appreciated because I alsways bought of HP printers, but if I have to buy a new one for that I won't buy HP I'm worried sick have the same problem.

  Thanks in advance

  Hi @lilrhi,

  Welcome to the HP Forums!

  I see you are trying to print on paper 19.7 x 13.9 cm with your printer HP Photosmart 5510, on Windows 7. And I'm happy to help you!

  According to the specifications of the printer, it is not a supported paper size. The paper sizes supported for this printer are:

  Type of paper

• OfficeJet 7110: unlisted paper size

  To print from photoshop to a super A3 format, 13 of 19 "

  But this paper size is not listed. I don't see anything larger than A4.

  How can I handle this?

  Evening @ppoint.

  I hope that I can offer you assistance with print on 13 of 19 "paper with your Officejet 7110 large Format printer.

  I noticed that you have upgraded to Windows 10, some features may be missing from the initial installation.  You can try to uninstall the printer software. Then download the most recent driver available;  HP Officejet 7110 series full feature software and drivers - Make sure to get full functionality, not only the base driver.

  Did you that your computer has all its windows updates?  How can I tell if my computer is up to date?

  Restart the computer, and then try your print again. If the page size is always missing you can try to create custom paper sizes (use as a rough guide for directions.)

  Please NOTE: With all models, print custom page sizes are n ot guaranteed from Windows, it usually ends up being a limitation of the operating system presets. All these settings are error.

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• Paper size HP OfficeJet 7500 has large Format - custom printing

  I am a collector of stamps and create all my own scrapbook pages.  I use the white pages of a well-known stamp album manufacturer (lighthouse, Germany).  The pages are 10.625 "x 11.7".  How can I set up my printer to print correctly on them?  I don't see any option for custom paper, even if your listing online says that he accepts custom formats.  What should I do?

  Thank you

  Lloyd Thrower

  I found a solution.  The height of my pages are the same as the width of A3 pages.  So I have 1) used for the adjustment of the A3, 2) turned the page in landscape mode and 3) only used the 10,625 left inches of the page.  It prints perfectly.

  What I learned from this is to think a bit off the beaten path.  If the paper size is not supported, find one that is, which can be changed.  It must be greater than what you use - but not too big or you end up with too much adjustment.

• LaserJet P1006: Printer does not print custom paper size (#6 3/4 envelope) correctly frome wordperfect

  I have an impossible to correctly print #6 3 / 4 envelope using WordPerfect X 7 (Version 17.0.0.366).
  I use a HP LaserJet P1006, with 10 Windows HOME 64-64-bit. I manually added the #6 3 / 4 paper size envelope in the box size Options paper preferably print and the Print Server preference box. A test page will print correctly, just like a #10 envelope. At #6 3 / 4 print attempt, impressions as if an 8.5 x 11 sheet of paper, with addresses in the lower let of the leaf, properly oriented.

  The properties of the printer are as follows:
  IMF data format
  HP1006PrintPro print processor
  Windows x 64 operating system environment
  Name of driver HP LaserJetP1006
  Of Type Type3-user mode driver
  1.02.2680 driver version
  Additional printer driver files
  C:\windows\system32\spool\DRIVERS\x64\3\HP1006PP. DLL
  HP1006GC. DLL
  HP1006SU. ENT
  HP1006SU. WORM
  P1006ips.dll

  Although I could not use Notepad or WordPad, I can save the document in PDF format and print the envelope in PDF format from the Viewer.

  Thank you for your help.