PAVILION DV6 1246TX BLACK SCREEN ON RESTART

Similar Questions

• HP Pavilion DV6-6031eo - black screen (backlight problem)

  I ve bought a new laptop Pavilion DV6-6031eo 2 weeks ago, and it worked fine until today.

  The question:

  When I turn on the laptop, it starts as usual and the system works perfectly, but the screen is black, so I can´t use it, unless you use another monitor, think I Don t want to. I think it has something to do with the backlight, or perhaps the retroeclairages cable routes.
  HP logo at the back of my screen used to light up when I turned on my laptop, but now it s too messed up.

  No backlight and no light in the HP logo.

  I ve sent an email to HP TotalCare, since I got my warranty (lasts 1 year) and I would like to know if they will cover it.

  Hopefully, I will get a response as soon as possible.

  Thank you.

  PS: Sorry for my bad English. I m of the Denmark, so it s not my mother tongue.

  Hello

  Guaranteed that you have on this model it will cover for you and your English is very good.

• HP Pavilion dv6-2008eo: black screen

  After downloading Windows 10 my work computer stop, black screen and I can't turn it on.

  Hello

  Thanks for posting in the HP Support forum.

  * Scenario1 * if you press the button to turn on the computer and it does nothing (no light, no sound, no picture on screen) that sound like a hardware problem and is less likely to be caused by Windows 10.

  * scenario2 * if you press the power button, the computer starts (it has little light on the screen) but the screen is black and white (but working) happened after Windows upgrade 10, then it's software caused by the bad update of the new operating system (defective or full).

  Here's a full article on the startup problem. It's very good details and covers pretty much everythng. Please, read and follow the instructions. Even though it says Windows 8.1, it is applicable for Windows 10, so > http://support.hp.com/us-en/document/c03515402

  If the problem is as scenario 2, I guess you can use the built in the recovery of the computer partition so that you restore the computer and Windows if you default factory and get back to work. Information and instructions here:

  > http://support.hp.com/us-en/document/c04758961

  > http://support.hp.com/us-en/document/c04758961#AbT8

  Looking forward to your comments.

• Pavilion dv6 - 7013cl - black screen with caps lock led flashes constantly at startup.

  The laptop was running hot. I cleaned the dust from the fan area. The battery is bad. I checked the voltage on the charger that was 43v - bought a new charger is 18.5 v. I wiped the ram and started with one and moved to different positions. I have now a black screen with the cap lock key blinks blue continuously and the f12 key led light ceases to orange. Any suggestions what I should try next and which snaps the seeing Cap continuously flashes means - that is a code or have a meaning?

  According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend to Contact HP immediately technical support by phone for further assistance immediately to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Pavilion DV6 3055tx blue screen after RAM Upgraderei

  The product name and number: HP Pavilion dv6 3055tx

   

  Pre-installed RAM: 3 GB
  

  Operating system: Windows 7 Home Basic 64 Bit (90 days)

   

  Error message (if any): blue screen on startup of the BONE
  

  All changes to your system until the problem occurred: RAM upgrade

   

  In the title of the topic, include a brief and accurate description of the problem and your product information: I use this product for a long time... Good...

   

  One day, I thought to upgrade my RAM, so I ordered "CRS 4 GB LT_CMS04GX3M1A1600C11"

   

  Corsair 4 GB DDR3 RAM simplified eBay India

   

  After I received the product, I open the back panel and removed the 1 GB RAM Samsung and Corsair inserted one I ordered.

   

  After this, I restarted my system

   

  When starting Windows came to loading blue screen suddenly comes and laptop restarting

   

  Then a black screen comes with 1. Launch the tool to restart System 2. Start Windows normally

   

  I gave my chance for both, but the same blue screen.

   

  After that, I removed the two Rams and inserted as a single Corsair

   

  Same blue screen

   

  Then I open BIOS and it says 4096 MB installed memory

   

  After that, I inserted the 2 GB with it means Total two-channel 6 GB

   

  But again Blue Screen and BIOS saying 6144 MB

   

  What is the problem?

   

  Please help me solve the problem.

   

  The eBay seller is ready to replace the RAM, but I want to know if this could be a compatibility issue.

   

  Thank you... Waiting for a good answer

  Hello:

  I can't find any specs on that you bought it from memory.

  Your PC will run from 8 GB of memory, but you must be careful as to what memory you select.

  You must get the PC3-10600 (1333 MHz) memory and it must be of low density.

  You can't get PC3-10660 or PC3-10666 memory and cheap will be high density and will not work in any case in your laptop.

  You can see this related posts with someone who had the same problem, and when he bought the good memory, his problem was gone.

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/dv6t-3000-RAM-upgrade/m-p/2492127#M17965

  I think you bought PC3-12800 memory and this is probably the high density - two bad things.

• HP Pavilion 14-n059TX: black screen

  Hello!

  I have a problem with my HP laptop Windows running 8.1. At first, when I go to the computer setting, he showed that this app can not open. File Explorer is running with administrator privileges. Restart the Explorer of files normally and try again. I thought it was told me to restart the computer. So I restart my laptop, but after that, he showed me the black screen and a blinking cursor. I tried a solution to remedy, but it won't work. Can someone help me with this?

  Hi @LeonValentine,

  Welcome to the HP support community!

  I read that you have a problem with the file Explorer on your HP Pavilion Notebook 14-n059tx and some applications not working not properly. To restart Explorer. Press Ctrl + SHIFT + ESC to open the Task Manager, locate the Windows Explorer, right-click and select restart, and then restart your computer and see if it helps.

  You may need to turn on network discovery. Here is something that shows you how to do this, it is Windows 8, but it works the same.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!

  Please get back to me how that happens.

  If you want to say thanks for my effort to help, click on thumbs upward to give me a Kudos.

  Thank you.

• Pavilion dv6-3150: hang on to restart windows 10

  Hello

  When I upgrade to windows 10 finished, restart windows, but hanging UN restart I press power button to turn off. When I start my laptop startup at black screen shot.

  Why?

  Unfortunately, win now forces the installation of driver updates - even when these update 'break' something!

  Because HP does not have the Win10 drivers for the DV6 series and in many cases, same Win8.1 drivers (which some will work in Win10), you're pretty much stuck problem.

  You must check the version of the current AMD drivers.  If they are newer than the Win10 drivers on the AMD website, which might work is the following:

  (1) download the drivers from the AMD website

  (2) uninstall the current AMD drivers

  (3) install the drivers from the AMD website

  4) updated drivers block in Win10 it does not replace the new video drivers: http://www.howtogeek.com/223864/how-to-uninstall-and-block-updates-and-drivers-on-windows-10/

  Understand, however, that none of these steps can leave you with a non-working display - and if that happens, your only recourse to get a rear DV6 job will be to restore from recovery Win7 HP media.

  Sorry, but DV6 were not designed to work with Win10.

• Pavilion dv6 questions white screen).

  A problem in class with the HP Pavilion laptops, white screen issues. Note right on my pavilion dv6 1 year that a black screen is natural every day. Here what I did to correct the current problem reinstall windows 7, install all updates, update BIOS and chipset and the same problem occurs every day. Anyone else have any suggestions what could be the problem? Any help would be greatly appreciated.

  Thanks in advance.

  Mike

  Hi David,

  I try now technical scanning it did not help. It gets worse! I'll send the laptop to HP for repair. It a good thing that I got a year extra 1 warranty when I bought this laptop. I was checking the sites online and cards mothers cost between $ 200.00 to $ 300.00. I also have problems with this laptop.

  Thanks for your help.

  Mike

• HP Pavilion dv6-1277el blue screen and disk hard error 303

  Hello

  I have a HP Pavilion dv6-1277el with Windows 7 installed. For some time the laptop crashed several times with blue screens until one day windows no longer starts or is is stuck on the loading screen.

  I used an Ubuntu live CD to backup data to the HARD drive of the laptop on an external drive, but after that transfer a large amount of data that I received a warning ON impending drive failure due to reassign areas.

  Restarting the laptop I received the following message from the HP auto test:

  Hard drive 1 fast (303)
  Hard drive 1 full (305)

  The strange thing is that, after the first time that I had these messages, Windows rebooted to work without any problem and I've never had any blue screen again.

  What should I do? Anyway to change my HARD drive or her trust?

  Thank you

  Hello new solvayhütte.

  Probably, he continues to work because it detects a problem with the drive.  However, the reader may not be totally dead immediately.  So now is the time to get ALL the data that you want out of the disc before it goes bad.

  You have two options currently.  You can replace the drive hard yourself (it is not difficult) or contact HP for a repair.

  To replace the drive hard yourself, you can use your notebook PC Maintenance and Service Guide for instructions on disassembly of the laptop.  There are also specifications stating the hard drive inside your laptop.  Use this information to buy a new hard drive and compatiable.

  If you do not want to replace the drive yourself, you can contact HP and inquire about a repair.  If you are within the United States or the Canada you can call to the 1-800-474-6836.  However, if you are outside this area, you will need to go to the HP support site for the contact information for your region.

  I hope that this information has been useful.  Have a great day!

• Pavilion x 360: black screen after log in

  My hp Pavilion x 360 worked very well today in the morning when I turned it on it everything seemed normal I put in the password journal and access the screen once I hit went balck bu the slider was still showign how can I solve this problem since I really need for school?

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of the session the question first and then proceed with the restoration of the system.

  Kind regards

  DP - K

• Dv6 envy: black screen

  While my laptop turn on and get to the screen fine connection, as I have, the login screen becomes empty. I can access the pass simple hp for some reason any and responding to things like brightness. Its like the office simply refuses to display. I tried delays and remove the battery. Any tips?

  Hello

  Try this and let me know.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  At the bottom left, select details (if it is not already selected).

  Click in the header of column Nsoul to organize the processes in alphabetical order.

  Look for an entry called to run once Wrapper (RunOnce.exe) - If you see it listed, right-click on it and select end task.

  The office is now show?

  If this is the case, download Autoruns on the following link and save it in your downloads folder.

  http://download.sysinternals.com/files/Autoruns.zip

  When you have that, open your download folder, right-click on the folder zipped to Autoruns, select "extract all...". "and in the next window, click Extract.

  A new window will open displaying the extracted content.  The application you must launch is the 2nd in the list (in format autoruns 636ko) but this by right clicking on it and selecting 'Run as administrator' -click 'Yes' to the uac prompt.

  Scroll down the list until you find the entrance to RunOnce (it may well be 2 entries) and Remove the tick (s) in the box next to it.

  Restart computer and see if it boots now on the desktop.

  Kind regards

  DP - K

• HP pavilion i5-n040us: black screen.

  Thank you PK of Provost David. Your solution to my problem of closure has worked. But there is another problem that persists. When the screen turns off screen always appears in black. Pressing the mouse button or pressing any button turns on normally display. But when the screen was interrupted with the appearance of the black screen for extended periods (45 min or more), touching the mouse pad or any key back on display. All I am able to do is to keep away the machine by the power button and put back on.
  And with the solution that you have given for the closure, it worked. But turning Starter fast return on brings back the problem of closing so I turn that on.with that I have no problem closing.
  Any help with this?
  Thank you

  Hello

  You are welcome

  Try the following.

  Download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp62001-62500/sp62417.exe

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the following.

  Intel Smart Connect driver technology.

  Intel HD Graphics Driver.

  Once completed, restart the computer again.

  Kind regards

  DP - K

• Pavilion G6 1332el: black screen after installing drivers

  I installed Windows Home Premium x 64 on my HP Pavilion G6 1332el and everithing was very good.

  Downloaded all the drivers for this operating system on the HP Download Page and install them all. I never reboot after each driver installed, so I can not tell you witch cause car my problem.

  After all, I did a normal Shut Down.

  When I powered THE next day, after Windows Logo disapier, only black screen remains.

  I tried VGA output, but my laptop keyboard faield and I FN key on my USB keyboard.

  I'm here, can I di to solve my problem?

  Thank you!

  apashi

  I'm guessing that you have reinstalled Windows from a DVD, right?

  Your PC came with a version of HP OEM of Windows preinstalled, and it is the only version guaranteed to work on this unit.

  You should consider reinstalling using HP recovery media to operate again.  It's a set of DVD and a CD that will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  Note that if HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/
  
  Don't forget to read through the material in the linked thread before attempting the recovery: http://support.hp.com/us-en/document/c00707939
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• HP Pavilion g7 Notebook black screen at startup (freezing applications)

  Hey everybody,

  I use a laptop laptop HP Pavilion g7 running on Windows 7 Home Premium (64 - bit, 6.1 Build 7601).

  Processor: Intel Core i3 CPU M 380 @ 2.53 GHz (4 CPUs), ~2.5GHz

  Memory: 4096 MB RAM

  I use this laptop for two years and this is the first time I have encountered this problem.

  The problem:

  Whenever I turn on my computer, it goes to start normally.  Before the connection with my user name appears, there is a pure black screen on during about 5 minutes before.  During this time, all I can see is my move move.  Whenever I can finally connect, I wait until it has finished start up and continue to open an application.
  
  Whenever I was able to open an application, it will run for about 3 minutes, but then everything freezes.  After the use of CTRL-ALT-DELETE, I see a message on a black screen that says "Failure to display security and stop options." He then told me to press ESC or press the power button.  If I press ESC, the laptop is still frozen. If I press the power button, I go through the same process over and over again.

  Even with the SafeMode (Networking), I get a black screen for a few minutes before being able to see my username on the login screen. Fortunately, Safe Mode works very well.

  I ran scans using Norton and Malbytes, found tracking cookies and malware and removed them, but my laptop is still the same.

  I don't know what to do. I hope someone can help me solve this problem.

  Thank you!

  Tsukiou,

• Satellite A200 - black screen when restarting

  I have satellite A 200 and I have the problem that when you restart, I have only a black screen and goes no further. But I do not beep. Only available in one place. I tried everything, but nothing puts the order. I tried to install Xp, but it does not work. Help.

  Hello

  You mean you don t nothing appears on the screen during startup? Not even the Toshiba splash screen?
  Is you can access the BIOS?
  Please check this box.

  You can also check this; Remove the battery and unplug the AC adapter. Wait a little (1 hour), then after this period of time the two parties again.
  Then try to start.