Pavilion dv6: HHD disk failure

Similar Questions

• HP Pavilion dv6: recovery disks ordered HP but recovery is a FAILURE...

  The hard drive failed on the laptop and I got a replacement after all operations of chkdsk drive, which has been formatted without problem in the initial recovery stage.  Classified into recovery disc for HP Pavilion dv6.  Insert the first disk and everything goes OK.  Load the 2nd disc and everything seems to be OK.  Load the 3rd disc (Supplemental) and everything seems to be OK.  Laptop restarts for the first time, starting Windows starts, starts the Software Installation section.  2nd restart start automatically then start Windows appears.  Additional CD is drive all the time.   The Recovery Manager window appears and indicates "recovery has failed.  Select one of the following buttons:...  Now, I save the log.  The log file is saved as. HP_SSRD_LOG SRD.

  --------------------------------------------------
  [17:47:22.78] enter audit OS Edition...
  ----------------------------------------
  [17:47:22.80] check RStone.ini file to determine the required edition.
  [17:47:22.83] out of checking OS Edition...
  --------------------------------------------------

  --------------------------------------------------
  [17:47:22.85] controls if the upgrade to Windows 7 is required.
  ----------------------------------------
  [17:47:22.86] current edition is [HomeBasic]...
  [17:47:22.86] [start] necessary. Don't need to upgrade...
  [17:47:22.88] [Starter] needed...
  [17:47:26.67] necessary [Starter] edition. But is not the case of the [Starter] OS...
  [17:47:26.67] OS edition upgrade might have a problem...

  Management and maintenance of deployment images tool
  Version: 6.1.7600.16385

  Image Version: 6.1.7601.17514

  The current edition is:

  Current edition: HomeBasic
  The operation completed successfully.

  Component: TDC Preinstall diagnosis Tools for Windows 7 - TDC
  --------------------------------------------------------------
  Error: no OS flag not set on the device, please use EEPROM to set ~ OS SKU ~ value = 2
  [17:48:11.96] ------------------------------------------------------------------------------------------
  ...
  CTO error condition has been undergoing dtected [update Factory]! ***
  [17:48:11.96] Suggest create PIN-journal and send to TWN PDC NB-PreinPM for further analysis...
  ...
  [17:48:11.97] ------------------------------------------------------------------------------------------

  [17:46:33.77] Start BBOffline.cmd...
  UPDrv = [C:]
  [17:46:33.80] value UIA 951 error Code
  [17:46:34.36] WinPE is 32-bit.
  [17:46:34.36] start [corrections].
  [17:46:34.39] ---------------------------------------------------------------------
  [17:46:34.39] FixUps.cmd...
  [17:46:34.39] create overall progress information...
  [17:46:35.75] complete FixUps.cmd...
  [17:46:35.75] ---------------------------------------------------------------------
  [17:46:35.75] start [Tweaks for SDRD].
  [17:46:35.77] ---------------------------------------------------------------------
  [17:46:35.77] SDRD Tweaks to change the regional settings default user...
  [17:46:35.77] copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES. DLL.
  [17:46:35.89] Run "Dism.exe image:C:-/ Set-SKUIntlDefaults: en - U.S.-image: C:
  [17:46:42.32] ---------------------------------------------------------------------
  [17:46:42.33] start PININST.exe for offline...
  Housing starts [17:46:55.19] [Sleep 10 sec].
  Starting price [17:47:05.28] [creation RStoneFUpdate.INI].
  [17:47:15.00] start [create 1 GB Pagefile for offline].

  Volume in drive C has no label.
  Volume serial number is 4CE2-BE2D

  Directory of C:\system.sav\bbv

  12/26/2014 pagefile.sys 1 073 741 824 17:47
  1 file (s) 1 073 741 824 bytes
  0 44,734,984,192 dir bytes free
  [17:47:15.06] the mark detection.

  [17:47:15.30] ---------------------------------------------------------------------
  [17:47:55.53] Start SysID Check...
  [17:47:55.98] Start Option control code...
  SKU_DEF_COUNTRY = [244]
  SKU_DEF_SYS_LOC = [en]
  ------------------------------
  Reset the country in administrator...
  ------------------------------
  ------------------------------
  Reset the default user countries...
  ------------------------------
  ------------------------------
  System reset located
  ------------------------------

  Management and maintenance of deployment images tool
  Version: 6.1.7600.16385

  Image Version: 6.1.7601.17514

  Statement of the international settings offline.

  By default system UI language: en-US
  Settings system locale: en-US
  Default time zone: Pacific standard time
  The settings for the default user regional: en-US
  Location: United States (GEOID = 244)
  Active keyboard (s): 0409:00000409
  Keyboard layered driver: PC / AT Enhanced Keyboard (101/102-Key)

  Installed the language (s): en-US
  Type: Fully localized language.

  The operation completed successfully.
  ------------------------------
  Updating the system locale info...
  ------------------------------
  [17:48:06.81] Start PIN Tweaks...
  [17:48:06.85] ---------------------------------------------------------------------
  [17:48:06.85] PIN Tweaks to hide all for BurnBoot PBO and BBV2 on restored image...
  [17:48:06.85] ----------------------------------------
  [17:48:06.85] Tweaks to Unattend.xml of OOBE
  [17:48:06.85] to pick up the right file...
  [17:48:06.85] ----------------------------------------
  [17:48:06.85] rename unattend.org to unattend.or_
  [17:48:07.01] ----------------------------------------
  [17:48:07.01] without light sensor...
  [17:48:07.03] ----------------------------------------
  [17:48:07.04] it is restored by SDRD [SSRD.flg] image...
  [17:48:07.04] ---------------------------------------------------------------------
  [17:48:07.07] Start MIR Tweaks...
  [17:48:07.12] ---------------------------------------------------------------------
  [17:48:07.12] [MIR Tweaks]...
  [17:48:07.12] ---------------------------------------------------------------------
  [17:48:07.15] starting factory updates...
  [17:48:09.10] installation start QFE offline...
  [17:48:11.78] PININST_OFF: PAST...

  [17:48:11.83] Type C:\System.sav\Logs\BBFindEr.log...

  [17:48:11.83] Type C:\System.sav\Logs\BBFindE0.log...

  -C:\SYSTEM. SAV\LOGS\PININST_OFF. JOURNAL
  Result = PAST

  [17:48:11.86] Type C:\System.sav\Logs\BBFindEr.log...

  [17:48:11.88] Type C:\System.sav\Logs\BBFindE0.log...

  -C:\SYSTEM. SAV\LOGS\BBFIND4QFE. JOURNAL
  [17:48:11.88] FUList.log to check if there are double Desc...
  No duplication.
  [17:48:11.96] duplicated No. Desc is located... PAST.
  [17:48:11.96] there was no update from the factory...

  With all due respect this FYI is a user forum if we don't remember that. If you had problems and did not keep telling them something is wrong and also I and others here have no proof of your experiences. And since you threw the material person else or HP can help you now.

• HP Pavilion DV6: error disk 3F0 and hard 3F1

  Good, so I was playing my fav game, and my laptop has frozen, I decided to reboot and BOOM!
  
  3F1 error hard drive
  
  I'm curious and ran a hard drive diagnostic.
  the results are:
  
  CHIP: NOT INSTALLED
  DST SHORT: NOT INSTALLED
  
  After testing, I got error code 3F0, even after the release of the BIOS. A sound signal ends in the BIOS menu.
  On the other PC, the disc is workiing. don't know what to do. Help, please!
  
  _________________________________________
  
  MODEL: HP PAVILION DV6
  SYSTEM: WINDOWS 8.1 PRO 64-BIT
  ________________________________________

  Hi @Dawid531!

  This ID failure usually indicates that your HARD drive has failed and needs to be replaced or there is a problem with the SATA controller on the card. There is a great topic on how to resolve this error, so if you want you can take a look:

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/re-quot-hard-disk-3F0-BootDevice-not-found-quot-error/TD-p/5469074

  Hope this helps and let me know how it went.

• Pavilion dv6: hard disk gets stuck in a "loop", the private resources applications

  I have a HP Pavilion dv6 (dv6-6145dx) with 4 GB of RAM and Windows 7 x 64 installed, 500 Gb HD (Hitachi , 40% brand free).  It worked very well for a time very, very long time.  Recently installed Office 365 month last for professional use, which I was concerned might be a resource hog, but usually works very well.  I also AVAST! Antivirus Pro is installed.

  Last week, I started noticing a strange problem that I had not seen before.  Some applications have become desensitized.  I noticed the hard drive light was constantly.  So I tried to close some applications (including Outlook), thinking that I was running resources.  But the deadlock problem continues.

  Listening to the hard drive, I could hear this "stuck in a loop.  Something like "click-[bunch of quick clicks] - click-click-[break].  Repeats every 2 seconds.  Continues to go on and on.  If I leave the computer alone for about 15 ~ 20 minutes, I discover it has recovered.  But once I run the intensive program of any disk, this repeats itself.  It doesn't matter if it's a 3rd team application or system (such as the launch of Event Viewer).

  To try to limit this, I started in safe mode with network.  I thought that if it was driver related, it wouldn't happen.  I launch the event viewer and still, the loop of the hard drive goes.  All gloomy.

  My antivirus is up to date. I ran a full scan of the system (F2) and no errors.  I ran the monitor resources and Process Explorer in the hope of identifying what that either method was this... couldn't see just guilty.  I also created a new user and logged in with this account... has always been able to experience this problem.  It is therefore not associated user account.

  I'm at my wit's end.  I am grateful that I have another computer I can use, but this should not be the case.

  Anyone who is familiar with this kind of hard disk behavior consumes resources?

  "If you keep an open mind, life will give you more opportunities."

  I ran another system test and eventually got more details:

  "Disk hard Test" failed

  "Fast hard disk 1" (303)

  "Complete hard drive 1" (305)

  OK, so from what I've found, it's a serious error means that the hard drive has failed.

  He is a computer 4 years.  I never had a hard disk failure in a laptop before, and I had many laptops up to nearly 8 years, without any hard drive problem.  The drive inside is manufactured by Hitachi... they don't exactly have the best reputation.  Anyway, all the research that I have met never goes into detail as to what might have caused the failure and if some readers have a reliability problem.  The answer is always "you need to replace your hard drive."

  Anyway, I will not try to diagnose it further.  I send my laptop in for repair (still under warranty - exhausted soon, phew!).

• Partition recovery Pavilion DV6 or disks back to factory settings?

  My girlfriend has the laptop Pavilion DV6 with Vista. She is not a computer person, so there is no serious problems it is locking up and goes really slowly. I'll get his PC to the factory settings, the problem is there is no disk and I don't know where the program is placed on HP systems. Is the partition on the HARD drive itself reovery or can I get HP support discs?  Thank you

  Hello

  First of all: you can check in Windows Explorer to see the existing of a recovery partition. If it does not exist, you can restart the PC/laptop. HP welcome screen, press the F11 key to start the recovery process. Follow the instructions on the screen.

  Otherwise, you can order a set of recovery dicses of HP through this:

  http://support.HP.com/us-en/document/bph07143

  Good luck

• HP Pavilion dv6 notebook intermittent failure of keyboard

  I have a HP Pavilion dv6 notebook, 1 year old.  Windows 7 Home Premium SP1, 8 GB of Ram.  I have an external wired keyboard (Logitech K120) and a separate wireless mouse.  Frequently in the past few weeks, I noticed that the keyboard will fail once the laptop worked for a while, usually when the laptop is in "sleep".  I hear by fails, * TWO * external and the internal keyboard.  Nor will respond to any strikes at all.  Mouse control is fine, even when the keyboard has failed.

  If I rebooted the system, it works well again.

  I think that when I saw this before, I tried to disconnect the external keyboard, but that doesn't matter, because the integrated keyboard does not work or the other.

  I guess this could result from certain automatic Windows driver installation or upgrade?  Does anyone have advice for the diagnosis or verification of current drivers?

  I have just closed the lid of the laptop, to force the machine mode 'sleep'.  When I opened the lid, the system has taken over, I can log in via the scanner digital, the mouse works but the keyboard has disappeared.  I had to reboot the system, update this message.

  fmaurais,
  
  
  
  Try the following steps:
  
  
  
  Control Panel-> hardware and sound-> Power Options-> change Plan (of the current plan selected) settings-> change the advanced power settings-> parameter of selective suspension of USB-> Disable (both)
  
  Control Panel-> hardware and sound-> Power Options-> change Plan (of the current plan selected) settings-> change the advanced power settings-> PCI-Express-> Link State Power Management-> Disable (both)
  
  
  
  I read on a Microsoft page that is who can solve some problems "out of sleep."
  
  
  
  computerwhiz90,
  
  
  
  I'll see if I can get a model of your laptop to see if I can reproduce the problem.

• Pavilion 11-n010dx: disk failure hard error long dst Pavilion 11-n010dx

  I realize after searching for the error that my only solution is to replace my hard drive but I need some advice on what exactly, I need with respect to a new hard drive. Not very tech-saavy. Please notify.
  Failure id 9fnhbr-7b783q-xd7v6k-61ed03.
  Thanks for any help.

  Here is the Service Manual:

  Manual

  Replacement hard drive is shown on page 36 of the manual. Your laptop, plug, came with a disk 5400 RPM 500 GB. This model uses 7mm superslim hard drives is as well as what you buy. There are also options for a solid m2 or normal size state drive solid state SATA drive as a replacement for the mechanical drive slow 5400 RPM. In other words, it would be the perfect opportunity to speed it up a little.

  It would be a 7200 RPM mechanical drive of 500 concerts and would be a good replacement at low cost:

  http://www.Amazon.com/Seagate-laptop-7200rpm-cache-ST500LM021/DP/B00ISKS416/ref=sr_1_2?ie=UTF8&QID=1462017567&SR=8-2&keywords=7mm+laptop+hard+drive

  Solid state drive designed to replace the hard drive:

  http://www.Amazon.com/Samsung-2-5-inch-internal-MZ-75E250B-am/DP/B00OAJ412U/ref=sr_1_1?s=PC&ie=UTF8&QID=1462017682&SR=1-1&keywords=Samsung+850+Evo

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Pavilion 23p 030: disk failure message hard Pavilion 23 p030na

  My PC froze on me and when restarted message warning of hard drive failure and run a test of f2. Memory was OK but the HDD test failed. message on both tests said 'smart balance sheet not installed' also ' long DST not insalled ' and 'short DST not installed ".   This not that old PC and improved (if that's the right word) to W10 end of last year. Some W10 installation problems, but he eventually installed without any problems.

  Any ideas?

  PS - apologies for the bad topic Board but this message is sent from my ancientlaptop and I couldn't change the 'portable' and click "desktop".

  Thanks again for your help.  Not sure what a SATA controller is but I have a very good clinic of the PC at the end of my road with a good reputation to heal the sick computers.  Give them a call in this case once again

  Your backup tips is a good one--I keep everything what it I need to keep on 2 separate external hard drives that I only connect to my PC when I need to.  Having always upward, it's something I've learned in my 7 years of life! And I would never trust this thing 'cloud' take care of my files.

  see you soon

• Pavilion a4316f: recovery disk failure

  My pc has a new hard drive and the motherboard.  I ordered and paid for the cd of recovery for this on the site.  The recovery software GET were he wants you start after backup or begin without saving.  He ten request the recovery 1 disc that sits in.  I spoke twice to the technical support.  The first time I had no access to the serial and model numbers so I called back.  The second time all the girl told me was because I bought the pc ' 09 it was old and I have to pay someone to fix it.  I just, I was wondering if someone could give me and an idea of why did not the disks.  I would stay again for new disks, had been offered.

  Well, if it were me, I would be forgotten on the use of the recovery of the value and just use a Windows & 64 bit installation disc and use the key on the case to turn on.  There are different ways to activate a reinstall, but it is the easiest.

• Want to dv6: hard disk failure

  My faulty hard drive in my dv6 16 gig RAM (8.1 64-bit Windows) of Envy is a Toshiba model MQ01ABD100, ATA, 5400, the capacity is 1 T.  I want to replace the drive with a 2 t 7200.  What will be the best replacement? Can I use a SATA drive and it will improve performance?  Thank you.

  Hello

  What is your dv6? DV6 machines already use the SATA. Older generation dv6 use SATA II but the use of the most recent generation dv6 SATA III. In theory, you can use any standard laptop HARD drive today but to ensure compatibility, please use same brand of the existing HARD drive.

  Kind regards.

• Pavilion dv6 - 7095ca: no boot device - insert boot disk and press any key

  
  

  Thanks for your help and please excuse my bad English.
  Please check item 7, if you're in a hurry. This is the point with my Pavilion DV6 - 7095-CA:

  (1) the operating system is Windows 7 Home Premium (64 bit), the provided original with my 7095CA Pavilion, more updates HP until 2013, and all Windows updates until July 2015.

  (2) now I can't access the operating system and I have no interface UEFI. I can see that I press F2 at startup, just a test simple disk in BIOS f.0Une (the test shows that the disc is OK)

  (3) return in 2013 it took a drive failure. I did replace the disk and reinstall original Win7, all updates, including the HPS, win7 updates and all my personal software.

  (4) at this time, I bought a spare hard drive and did a complete copy of the disc using Partition Wizard bootable cd. The second disc has been tested and worked perfectly, with all of my personal software on this subject.

  So I have 2 HDs identical with the same system on both drives, fully working and tested.

  (5) a few days ago I came across the HP website and made a few updates, including the BIOS f.0Une (the last BIOS update, was of course).

  (6) after BIOS update ran, I received the message "no boot device - insert boot disk and press any key".

  (7) I couldn't solve the problem, so I did remove the hard drive and install my backup drive, which lay in a dry place without danger from 2013.

  (8) I turned on the computer and got the same message "No boot device - insert boot disk and press any key", and I couldn't find any way to solve this problem.

  Now I'm doing a new installation on a third HD everything works very well, so far, in the new facility and I will never buy HP again.

• "Smart hard disk error" - HP Pavilion dv6 Notebook PC

  Hello

  I have a HP Pavilion dv6 Notebook PC, which has been meeting for the past weeks starting problems. Normally, this meant a long cycle of-->--> reboot Recovery Manager startup repair until it finally started up properly when trying to 4th/5th so far...

  Now, I get the 'Smart hard drive 301' error message. The "test drive" fails, and I am unable to start my pc.

  Thanks for your help...

  Hello

  Smart disk hard error 301 or failure id XXXXXX-XXXXXX-XXXXXX-XXXXXX indicates the disk HARD on our machine is a failure. You need to replace the HARD drive. It is still under warranry? In the affirmative, please call HP for a replacement.

  In the United States:

  http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

  or the HP technical support: 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://welcome.HP.com/country/W1/en/contact_us.html
      
  Kind regards.

• HP Pavilion dv6 - 3320st - Smart hard disk error - replacement?

  Hello

  My laptop is hp pavilion dv6-3320 st and I get smart disk error. I understand that my hard drive is a failure and I need to replace it.

  Unfortunately, I do not know how to find a compatible hard drive for my computer.

  Here's my computer;

  http://support.HP.com/us-en/document/c02735818

  and the hard drive I think to replace;

  http://www.Directron.com/wd7500bpkx.html

  Any help will be much appreciated.

  Kind regards

  Your laptop has a regular 2.5 "SATA hard drive installed.

  Any 2.5 "SATA hard drive should work just fine.

  The hard drive that you have access to will work fine.

  If you do not use a lot of space on the hard disk, I recommend to install an SSD. It is much faster but more expensive.

• HP Pavilion dv6 B8N04PA #ACJ: update the configuration of failure. Restoration of the changes

  Whenever the laptop to install the update. Then when you restart it will read the updates of configuration failure. Restoration of the changes.

  This continues until 30 minutes before it finally restarts

  Hi @mayurz91 ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your problems of HP Pavilion dv6-7040tx laptop and with updates.

  Here is a link to the HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system.

  If you run an antivirus protection, this could be a problem. Disable temporarily to perform the required updates.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Plug the power supply directly to a wall outlet works. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.

  I hope this helps.

  Thank you.

• Pavilion dv6-6b54sl: ID of the laptop failure

  Hello, I have a laptop HP Pavilion dv6-6b54sl, product number: A6P10EA #ABZ.   OS = Windows 7 64 bit.

  My question is: laptop stops working, more than 1 time. Reboot the system, then it seems normal.

  I just restored original configuration. But not resolved.

  So I did the HP diagnostic test: test running and break-in failed.

  Starting test report:

  Memory test passed; =

  Smart check = passed;

  Short-DST = failure;

  Failure ID = mc0c6w-5rt7g2-qfph4k-60xh03

  Could someone explain to me?

  Hello

  Yes, hard drives, I linked in my previous post works perfectly - you are not limited in any way that the manufacturer of the drive.

  Kind regards

  DP - K