Photosmart 5510d series: after change of type black ink cartridge only prints outline

Similar Questions

• DeskJet 5550 does not print after I installed new black ink cartridge.

  I recently got a new Dell with Windows Vista 64 - bit OS.  Printer was working fine until I replaced the black ink cartridge.  Print the control page as usual after you install the cartridge, it will not print anything else now.  Not even a test page.  I tried taking the cartridge out and put it back in.  Tried to pull the plug on the back of the printer and plug it back.  Tried turning the printer off and on again.  Also tried to restart the computer.  I downloaded the HP Print Diagnostic report and could not find any problems.  Could there be a problem with the ink cartridge itself?

  Well first of all, I went and bought a different black ink cartridge to remove the cartridge in the problem.  This was not it.  Then I unplugged the printer and cleaned thoroughly and connected plug.  Still did not work.  Then I went into the properties on my printer and started to play with the settings.  FINALLY I FIXED IT!  I clicked on the tab advanced and then click Print Processor.  I then changed to WinPrint and retried the Test Page printing under the general tab and it worked!  Woo Hoo!

• HP Photosmart C309a does not print after I installed new black ink cartridge.

  Printer was working fine until I replaced the black ink cartridge.
  Does not print the text in black on the printer test page.
  The States new HP printer installed cartridge.
  All other colors are working well and were replaced at the same time.
  Tried cleaning cartridges - pulling the cartridge and put back in - turning the printer off and on again.
  Also tried to restart the computer.
  Could there be a problem with the ink cartridge itself?

  REAL SOLUTION. I had the same experience, spent hours pulling my hair like children had project do to school and it was 22:00.  Your cart is clogged! Here IS THE SOLUTION! (: 1) remove all ink cartridges. (2) extract the carriage that circulate in the ink cartridges by lever on the right and the trolley lifting vertically. (3) wipe any accumulation of visible ink on the outside with clean cloth or paper towel. (4) THIS IS THE KEY: keep transport under hot running water to empty all the handwritten entries in the irrigation channels that distribute ink. Keep rinsing in clear water i.e. no sign of ink. (5) trolley dry with clean cloth and blowing in areas, you can access in order to remove the remains of the water. (6) let transport air-dry overnight. (7) Re-install transport, then reinstall the ink cartridges. 8) ENJOY YOUR PRINTER. (9) I saw many entries on this topic dating back two years, without real solution offered. I am an automotive engineer in unemployment. If HP (or anyone else) would like to hire a smart worker, engineer in the Detroit area, please inform. Thank you!

• HP Deskjet 1000 J110: Intense black print with the black ink cartridge only

  Hello

  I am trying to print the darkest possible black, but simply by using the black ink cartridge. How do I get there?

  My printer is HP deskjet 1000 J110 using cartridge HP 301.

  I do my drawing in Adobe Illustrator and set the color to be CMYK 100 100 100 100.

  If I insert only the black cartridge, the printer will leave empty place where color CMY ink should be or it will fill the space with black ink?

  Basically, what I'm trying to do is to increase the density of ink to the highest possible but only using only the black cartridge.

  Thank you.

  Welcome @didididot,

  Thanks to their participation in Forums of HP! I see by your post that you would like to be able to print in the black as dark as possible. I can help you.

  You can use the mode single-cartridge:

  Use single-cartridge in the HP printer with a single cartridge. Mode single-cartridge begins when an ink cartridge is removed from the distribution of the print cartridge. In the mode single-cartridge, the product can only printing from the computer.

  Source: HP Deskjet 1000 J110 series.

  Here is a document for printing with black ink only (Windows).

  If you use a Mac, let me know.
   
  Feel free to click on the button 'Accept as Solution' and the 'Thumbs Up' for my help. Please let me know the results and if there is anything else I can help you. Thank you!

• After the installation of the new black ink cartridge, my pictures are distorted

  After installing a new black ink cartridge, my pictures are distorted

  Hello

  I suggest you to contact HP for further assistance regarding this issue.
  http://WWW8.HP.com/us/en/support-drivers.html

• Black ink cartridge will not print

  Putting in a new black ink cartridge the printer says it's there and full of new ink but when printing it don't use it. It happened the last time that I put in the black cartridge and I managed to do it finally work but don't remember what I did. Why is this happening?

  With printing black ink is not like that, there are only a few things you can try, and it looks like you did most of them. If the steps described in the following paper the link did not help, then you might make a physical print head cleaning. Bob_Headrick gave the steps to do this in the post below. If none of this does not work, you can either replace the printhead by contacting the support of HP, or you will need to replace the printer. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.
  
  HP Technical Support call case form:
  http://goo.GL/w7Hgh
  
  Troubleshooting print quality problems:
  http://goo.GL/FHypA
  
  Physical cleaning print head:
  http://goo.GL/DfroJ

• Black ink cartridge print do not. All-in-one 6500 e709n, windows 7 64

  Black ink cartridge not printing not tried currently displayed responses including soak the print head.  The only check that I'm not sure of the vent hole is.  I see not a magnifying glass, or hole to put the needle find.  Tape has been removed.  Tried to blow into the cartridge to see if the ink out of the top of the cartridge - no luck.

  Troubleshooting the e709n print quality problems

  If you have followed all the steps to solve this problem of print quality and tried the solution of soaking the print head, then at this point so there are 2 options.

  (1) replace the print head.  The printhead can be ordered from the HP parts store using the CN643a part number.  I'll give you a link to the following HP parts store.

  HP parts store

  (2) replace the printer.  Sometimes, it may be cheaper in the long run to replace the printer with a new one, because the new unit will be delivered with the latest updates in technology and a new guarantee.

  I hope this helps.

• Photosmart HP 7510: Change what black ink cartridge is used.

  Our 7510 HP ink slots for small and XL cartridges, however it will not use the small cartridge ink. How to change the parameters to pass to the thin cartridge XL, small is running out of ink and I can't find the black ink cartridge (Photo) in stores now. I bought two 'small', one was a XL, not labelled as such and we ordered cartridges from HP on the web and they were too big too. I need to be able to use the XL Black ink cartridge that is installed.

  Thank you..

  Hello

  First, XL ink cartridges are physically the same size with normal cartridges (same number). The difference is more inks XL cartridges.

  Your printer has 2 black ink cartridges, one narrower called Photo ink cartridge and one large/more bigger called black ink cartridge. When printing in grayscale, the printer will mix all the colors to give B & W. If you want to print black ink only, you must indicate to your printer. Please try

  (a) double-click the desktop printer icon.
  (b) click on set preferences.
  (c) click on advanced.
  d select "Black ink" only for printing in grayscale
  (e) click Ok/apply.
  
  Note: printer must still all color inks and it will consume a very small amount of ink over the warmng of trial.
  
  Kind regards.

• Problem printing HP Photosmart series 4100 with black ink cartridge

  Although the two black ink cartridges indicate that they r at least 1/2 they full r impression as if they were empty. Pale color impossible to read. What is the problem?

  Hi Bialy,

  I found the troubleshooting guide for the issue of fading print.

  Please try and let us know the status.

• HP Photosmart more B210A: black ink cartridge will not print.

  The black ink will print on my printer.  I installed new ink and cleaned the print heads.  I did a review of the printer and the ink of color appeared only.  The printer is recognizing the cartridge when I check the ink levels.  The first page after cleaning came out very faint then anything.  At first, I thought that the new black ink cartridge was defective.  So I replaced it with another new - no difference.

  The only change is that I have installed all new cartridges when all printing has become very low.

  Help, please.  Thank you.

  Fushing did not work, however, we used a demo on Utube and has not used the distlled water.  That could be the problem. The printer is about 8 years old, we decided to get a new one.  Thank you very much for your help.

• Photosmart 7520e: black ink cartridge doesn't work on Photosmart 7520e

  Black ink cartridge stopped working.  I replaced the cartridge with a new cartridge, HP 564 XL.  Used printer clean print head and Align tools.  Received message 'alignment failed.  Cartiridges are defined for quality parameters' the printer is off guaranteed so no help from HP.  Does anyone have any suggestions as to what to do?

  Hi @aquaharry,

  Welcome to the Forums of HP Support! I see that you have recently changed the black cartridge on your HP Photosmart 7520 and now you cannot print. You get a "alignment failed.  Cartridges are defined for quality parameters "."

  I wish you continue troubleshooting here: color or black ink not print

  Complete all of THE steps and make sure that the cartridges are properly ventilated.

  What are the results, you are FTA now to complete a successful harmonization?

  This is a great question other clients may also wonder; Please click the "accept as Solution" if you think that this message has helped you, or could help others. You can easily say 'Thank you' by pressing the "Thumbs up" icon.

• Photosmart D110a: installed the new HP black ink cartridge and now the black ink does not print

  Just installed a new print 60xl cartridge to replace the one that was being ink. Now the black ink basically does not print. I cleaned the cartridges 4 times and run all Diagnostics pages. The black prints just a small piece of the upper part of the letters on the pages of diagnostics and in grayscale on the test pages.

  Hello!
  Welcome to the HP Forums, I hope that you are @janmacwill,

  I saw your post on the black ink does not print your Photosmart D110a and I wanted to stop making you share my suggestions. See the link below to solve the problem and if the black still does not print, contact HP (below) to see about a replacement unit.

  Printer prints a blank Page or doesn't print black or color ink for the printer series HP Photosmart e-All-in-One (D110a and D110b)

  If you have trouble, let me know and I'll do my best to help.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up".

  to say thank you for my help.

  Have a wonderful day

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once will open the support page please select the country in which you are

  located. Then enter your model of HP on the right number.

  (2) then choose the 'Contact Support' tab at the top and scroll down to the

  bottom of the page "HP Support - Contact" to fill in the form provided

  your contact information.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select ' Get phone

  number. "A file number and telephone number will now fill for you.

• Photosmart 7510 - black ink cartridge does not print

  Recently, I replaced the ink cartridges on my Photosmart 7510 C311A. These are all the "genuine HP cartridges ', full.

  Black ink (with the symbol of the Pentagon) does not print, not at all. I ran through the standard troubleshooting steps:

  Cleaning of printheads

  Cleaning of copper contacts

  * Check for a good evacuation

  My colleague in the corridor as the printer even so I borrowed his black ink cartridge and tried: same problem. The printer does not record that there is a problem, but when I run printing tests, where there should be a black ink, there is absolutely none. All other colors print correctly.

  The printer doesn't lack NOT of the printer "align" test however does not offer a suggestion of what to do from there. I've not seen - in test reports - an indiciation of the misalignment.
  
  Suggestions on what to do now?

  I had the same problem. I had replaced the empty cartridge black and suddenly, no ink. Finally, what has worked is
  (1) I removed all the cartridges and cleaned the copper connectors with wet Publix.
  (2) I got a wet paper towel and he pressed repeatedly on the silver circular vent that would be under the black cartridge. I did until no black came. Let it dry.
  (3) I replaced all the cartridges and on the printer. I went to tools/clean the cartridge. I did it a couple of times and he finally printed black ink! I confirmed by going to tools/align, and align the cartridges successfully. He had kept before crashes when the black ink did not work.

• black ink does not print HP Photosmart all-in-one

  I have new cartridges and after installation black will not print.  All other colors are pring.

  Hi Luv2dance728,

  Thanks for the reply and the information

  I suggest you start as a result of this document for Troubleshooting print quality problems, should be able to help you to get black ink works again. If it isn't, you can also try manually cleaning your print head to make sure there isn't a buildup preventing out black ink.

  If the printer still won't print black ink, it is perhaps an accumulation inside the print head or on the beak and to help solve this problem, you can follow the instructions in Bob_Headrick in this post on soak your printhead.

  If after these three things, black is not always print, it's a hardware problem with the printer print head and I suggest to call HP Support and inquire about their exchanges of and the trade program.

  Hope this helps, have a nice day!

• Photosmart HP 7520 - selection between large and small black ink cartridges

  Hello

  How to choose the big back in print cartridge. 564 large black ink cartridge and the small cartridge is 564 photo XL.  The printer uses only the thin cartridge ink and not the large carridge. Is it possible to select one cartridge to another?

  Thank you

  So looks like you do not print photos and print text documents only the photo ink is used.  Does not serve ordinary black ink.  Are read you the ink gauge of the printer or the computer?  They both agree?  I have some additional questions.

  1. What is the ink level estimated for each cartridge according to the gauge of printer ink?
  2. Are one of the toner cartridges "SETUP"?  If so, which?
  3. Are the HP brand ink cartridges?
  4. Have you removed and reinstalled ink cartridges?  Does make a difference.
  5. You have run the print head cleaning utility?  To do this, click the key button, then Tools , then on print head cleaning.  I ran 2 or 3 times.

  Are there changes?