Photosmart 7515: By default, black photo printer

Similar Questions

• HP Photosmart A826 is 100% Virgin photos printing.

  HP Photosmart A826 is 100% Virgin photos printing. Ink said 1/2 left and touch the bottom of the ink cartridge gets ink on my finger. So there has got to be something else going on here. It has not been used for awhile. I tried to clean the cartridge but no dice.

  In addition, agligning heads is throwing an error but it says that "check documentation.

  S/N {removed privacy}

  Product: Q8546A

  Generally, this is caused by a faulty cartridge. There are a few things that you can try before it's even though. The document following the link will guide you through the steps. If this does not work, replace the cartridge. If it still does not respond, you may need to get a new printer.

  http://goo.GL/0CQQs

• Printers HP Photosmart 7515: Efax works more on printer

  I have a HP Photosmart 7515.  EFax ability no longer works on the machine.  Has their been a software change or update to HP or Efax which must be installed to make it work again?

  Hi @hapstersmom.

  Welcome to the Forums of HP's Support. I want to help your PhotoSmart 7515 eFax service working again.

  Do you receive an error message when you try to use eFax?

  Try to go into this document. HP Photosmart 7510, 7515, ENVY 110, 114 printers - eFax Service restoration

  If you have any questions, or if this does not resolve the problem, let me know.

• Photosmart 6520: HP Photosmart 6520 does not black ink print

  I ran through the steps on the troubleshooting http://support.hp.com/us-en/document/c03954004 page and it did not work. I know similar questions have been asked and have "answered", but I have found no solution that worked for me. The printer was working fine earlier this week, and all of a sudden, it would not print black ink. I went out and bought a new black ink cartridge and that does not work either. It was the same problem that led me to replace my HP Officejet 6500 I loved tenderly. I need an all-in-one for my work, but I can't afford to buy a new after spending the money on this one. The warranty just ran out last month and I need help to solve this problem, because I'm not buying a new HP if it is a problem that all have the all-in-one. Other family memebers suggest Epson printers, but I love HP and wants to stick to what I know.

  Please help me.

  You mean by 'options', to have bought an upgrade right? Because I just got the phone with them and they me nothing that HP will make becaue it's out of warranty. So, build a defective product to force the new buy, is that correct?

• HP Photosmart A712: HP Photosmart A712 leaves 1/2 photo print

  Photography first printed beautiflly, but eventually the group stopped 1/2 way through the cycle. I don't remember changing anything whatsoever. I tried to find a updated driver without success.

  Thanks for you help.

  Hello!
  Welcome to the HP Forums, I hope that you are @lonestranger,

  I saw your post about your Photosmart A712 which ceased print before that he could perform a print job and wanted to respond with my own suggestions for you to try.

  See this link and try the steps. If problems persist, contact HP to discuss a business printer or upgrade. I'll leave their contact details below for you.

  "Out of paper" Error Message appears on the computer and the printer not pick up or the power of paper

  If you have trouble, let me know and I'll do my best to help.

  Hit the "Accept as Solution" If we found a solution and the "thumbs up" to say thank you for my help.

  Have a wonderful day

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.

  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

• Photosmart 5515 does no black ink print

  Not printing in black at all.  Full set of new ink cartridges.  Warranty is just exhausted.

  I've tried everything here

  http://support.HP.com/us-en/document/c03425035

  like everyone else I had read had this problem. No change.

  Any help out there?

  Seem to have solved.

  It was a clogged print head - probably due to the ink drying during the period of non-use.  Cleaning process all waste ink without much effect.

  Print head is not removable so manual cleaning is tricky.  Just wipe the filter did nothing.

  At the end of the day, slipped a piece of kitchen under the print head roll (it has a Groove where it will adapt and you roll the head top) folded.

  Removed the rubber around the offending ink filter washer.

  Slipped a long and tight fitting top pen top instead (felt tip seems best - but open at both ends, one tube, is what it takes, and it must be a tight fit).

  Refill pen with mouthwash (appropriate cleaning fluids are available, alcohol is the key it seems).

  Breath down on pen force the liquid through the printhead on paper towel.

  Printed later, but took a few prints to become completely clear.  It is time that clean the printhead automated may operate.

• HP Photosmart 7515: Touch screen went black

  Printer works very well at the outbreak of the computer,

  but the touch screen went black, permanently.

  No matter how much I press, it stays black.

  I disconnected and reconnected.

  Downloaded a new driver that allows me to trigger the scan of the computer,

  but I can't fax.

  Is this a driver problem, a hardware problem...?  Don't know which firmware is.

  Hi @lenny15,

  Thank you for visiting the Forums from the HP Support! I understand the touch screen on your HP Photosmart 7515 is completely black, you are able to print from the computer, but can not access the front control panel.

  I would like that perform you a Hard Reset on the PS 7515:

  1. disconnect all cables and cards of memory in the printer. Unplug the power cord, directly from the back of the printer when the printer is still on.

  2. unplug the other end of the power cord.

  3. If there is a power supply on the power cord, disconnect one end and reconnect it.

  4. at the end of 60 seconds, plug it directly into a wall outlet (not a surge protector or battery backup because they can cause the printer to lose over time basic functionality).

  5. connect the power cord to the back of the printer.

  6. the printer should automatically power back upward. If not, turn it on with the power button.

  7. try to make a photocopy (if your printer is a printer all in one) before you connect the cables from the printer.

  8. connect the other cables needed to the printer.

  If after the hard reset, you are still not able to access the Control Panel, I suggest that call you our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

• Photosmart 7515: Impossible to connect wireless to Photosmart 7515

  First of all, the printer worked before end of June when a patch Win7 crashed and I had to reinstall the operating system. I immediately upgraded to Windows 10; I am running anniversary of Windows Update (AU). I don't have reinstall the printer before last night. I am running Windows 10 a a full charge 18 Alienware. I am writing from this computer so I'm connected to the Internet and I'm connected wireless.

  I download the updated 2016 (PS7510_1315 - 1.exe) displayed for my printer and installed it, but when it came time to connect to the printer, it didn't - do not see the printer.

  I've reconfigured the printer twice and during each installation, the printer sees all networks wireless (including me), I select my network, the printer asks the password of my network and then it connects successfully to my SSID. I print the results of the wireless network Test with the bottom line of "no problem found" for the correct SSID. My computer is connected to the same SSID. On the printer, the blue wireless light is solid on and signal strength is displayed on the printer shows also strong.

  I then connected to my router and updated all the connected systems. The display shows four wireless devices, one being the printer. The printer didn't show the MAC address, not a name or one IP address like the other three, then I restarted the routed with the same results. Then, I opened an OS command window and ping the IP address - failed with "request timed out" and "destination host unreachable".

  So, I'm looking for help. The printer says that it is connected properly wireless with intense beep and a DHCP IP address which is also in the appropriate interval. I also tried the host name: dhcppc3 and that did not work (didn't expect really, since the INVESTIGATION period did not work but I wanted to be thorough).
  In advance, thank you!

  Nick.

  Hi @LoneRider,

  Thanks for joining the Forums of HP Support for a solution to your connection problem.

  I understand you're rying to connect a HP Photosmart 7515 e-all-in-one printer wireless to a computer Windows 10, but the installation failed because he wasn't able to find the printer. I would like to help with that.

  Here is a document of support designed to be used with this problem - printer not found during Network Driver Setup (Windows).

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Photosmart, 7515 won't print black

  I tried all the recommendations, I could find nothing doesn't.  Head cleaned and followed instructions in the tools of the printer.  I know that many have had this same problem and have found a way to solve the problem.  Any recommendations?

  In the paper here troubleshooting steps can help solve the black does not print on your Photosmart 7515.  Be sure to check the vents, as on the three solution.

  If the first four solutions do not resolve the problem I would say soak the printhead as described in the post here before considering to replace the print head.

• HP Photosmart 7515 photo printing paper is no good

  Fine, I can print a color picture on plain paper.  When I print the same photo on glossy photo paper black clothes all look green.  My print quality diagnostic report shows NO problem.  This happens for two 4 X 6 and 8 1/2 X 11 paper.

  HP 7515 has five cartridges.  My problem was solved when I replaced the black Photo cartridge, rather than the Magenta cartridge.  The black Photo cartridge was the original cartridge of the configuration, and the Print quality Diagnostic report showed yesterday that there little ink.  But apparently not enough!

• Cannot print from PC to photo photosmart 7515 tray

  My printer is a HP Photosmart 7515. I'm running Windows 7 on a Dell Inspiron One all-in-one.

  The interface between the computer and the printer works fine, but I can't understand how to print photos from my PC to the photo paper tray. I configured print 5 x 7 paper options (that I have loaded in the photo tray), but the image came out on the tray paper 8.5 x 11.

  I googled this problem and found that others have the same problem. Is it possible to do so and if so, how?

  Sorry to hear that you are having problems with printing photos. Just to be sure, we are located using the photo tray try this:

  -Click on the round of departure-> click on devices/Printers

  -Find and right click on your printer-> preferences click on printer

  -Select the paper / quality-> in the 'paper source select' choose the photo tray

  -As a result the size of the paper (the next option down)

  Let us know if that helps.

  Good luck!

• HP Photosmart 7510 won't use photo black ink

  I have a photosmart 7510 printer and I am printing from microsoft word 2010 on a windows 8. I print a word with no pictures in document. Printer preferences are on plain paper with normal quality. I can't the printer to use the XL Black ink cartridge. It only uses photo black ink. Is there a setting that I can choose to let him use the regular black ink?

  Hi shirsar,

  I understand that you have a Photosmart 7510 which seems to use a lot more than regular black ink black photo. I'm sorry to hear that, but think I can help you with a solution.

  You can set the printer to use only black ink when printing from the PC and ensures that it uses black ink and no ink picture. My instructions will be set up in the pilot if he does for all programs (if you just want to program it please let me know, and I advise you more). You'll want to start by going to your start screen, and simply start typing devices and printers, and you want to open that (if that is not in the work Panel type and then proceed to open devices and printers). Once the devices and printers is open, right-click on your Photosmart 7510 icon and select Printing Preferences. You'll want to then click on the Advanced Options button at the bottom right of the screen. The next page that appears will allow you to set the printer to use black ink only when printing from the PC (please follow the screenshot below for any clarification).

  

  Hope this helps, have a nice day!

• Printer HP Photosmart 7515 question

  Hello

  I have a HP Photosmart 7515 printer and I have a paper copy of 4 x 6 image on the screen and make copies of different size of photo - example: a full page of photos portfolio or 2-5 x 7 format. What are the steps to do this?

  Thank you

  TKH21

  TKH, unfortunately on the printer itself is not an option to do what you want (transform a photo portfolio page size 4 x 6). What you can do is to resize an image to a different size (i.e. transform a 4 x 6 in a 8.5 x 11).

  If you want to repeat and duplicate the image, you will need to find a software that does this for you and look at the picture on your computer first before you continue.

  I hope this information is useful!

• HP Photosmart 7515 black lines

  When making copies of doc feeder is veticle black lines. Only occurs when copies. Clean the rollers & reset the printer but did not help. HP Photosmart 7515 using Apple Lion OS.

  Hi mahjrh,

  Need to clean the right of smaller glass overall CAD to make sure there is no marks or scratches in the glass.

  

• C510a Photosmart: Black stopped printing on C510a Photosmart

  The black line print head no longer works in total. Not the Photo cartridge on the left. Two different new factory fresh cartridges have been tried. The ink levels are reported complete. It did not help of four 4 hours of cleaning the heads. Cleaning of the holes did not help.

  Hi @khpeter1,

  Welcome to the HP Forums!

  I noticed that the black ink stopped printing on your c510a Photosmart HP printer. I'm happy to help you!

  Please, try the steps in this guide, the problems of print quality. If this guide does not solve the problem, take a look at this post, Re: black printing not by @Ciara_B.

  If no job options, the print head / or the printer may need to be repaired / replaced. Please Contact HP phone support for assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope this helps!