Photosmart R607 camera:

A 1400 my 3.7 volt battery, can be used safely in a Photosmart R607 camera?

Hello

Based on the following link, it uses 3.7V battery so it should be ok. You will get more shots (about 50% more) compared to batteries 1050mAh:

http://www.aubatteries.com.au/camera-batteries/HP-Photosmart-R607.htm

Kind regards.

Tags: Notebooks

Similar Questions

  • 715 HP photosmart digital camera

    I need a drver for Windows 7 compatible with a digital camera of 715 HP photosmart.

    Help, please!

    I need a driver for Windows 7 compatible with a smart digital camera HP 715 photo.

    ... and you will get it at HP - those who make and support the product that you want to use.
     
    It is * if * HP supports the device under the operating system you choose to use - they don't have to.
     
    If you have a ( digital camera HP Photosmart 715<-- that's="" a="" clickable="">
    It's based CompactFlash card - then...

    Get a CompactFlash card reader that can read some CompactFlash cards you use in the camera and is compatible with Windows 7 and when you need to get the pictures from your camera, eject the CF card and insert it into the drive connected to the computer and copy or cut & paste like any other external USB drive.

  • Stack memory to the HP Photosmart m417 camera

    My chip memory SD for the M417 camera went wrong.  Can I replace a Micro SD chip in an adapter instead of the SD chip?

    Hello Dennis,.

    It should not be a problem as long as you get one that is not more than 1 GB as your size SD card.

    Sometimes the contact between the micro card and adapter can be summary to make sure its tight.

  • Digital camera HP Photosmart R960 &amp; Windows 7

    I upgraded my OS from XP to Windows 7

    My HP Photosmart R960 camera digital 10mp

    The camera works still strong including individual photo and video.

    The camera allows me to take panoramic pictures by taking a sequence of 2 to 5 images that can be stitched together to capture a scene too wide to fit in a single image.

    Since the evolution of XP to Windows 7, I can't locate the HP Application / drivers needed to assemble the photos...

    Formerly HP Photosmart Essential 3.5 download all photos automatically and automatically detect if there are panoramic pictures and automatically assemble them into a single image.

    Can someone help me?

    Thank you all for all your comments.

    The simplest solution for me was to use my old Office Gateway with Microsoft Windows XP Media Center Edition 2005.  I know that XP is no longer supported by Microsoft, but it still works a-okay.   Security software Norton is always updating XP.

    Photosmart Essentials still detects and automatically download my photos and detected panoramas are sewn automatically.  If i ' ts useful to keep an old computer to do things like this.  It is so easy to transfer the results on my Dell XPS laptop and backup drives.

    The camera man

  • Computer and camera are compatible?

    I have a HP Photosmart R607 digital photo camera that works very well.  I just bought a new 48 HP Pavilion dv6 - 6 c computer.

    I tried to download my photos, but it seems that the camera is no longer compatible with this computer.  Am I wrong?

    Thank you.

    Charl

    Thank you for contacting the HP Forum.

    I'm sorry, but you are right the incompatibility.  In fact, it isn't really your new computer, but the Win7 operating system - in any case, it is not compatible.

    If you want to take a look at some information about your camera, click on this link.  If you look under the heading 'Alerts for this product', you will notice a link for incompatibility with Win7.  The first line of this document reads, "we are sorry to inform you that there is no support for Windows 7 available for your HP product. This is why your product does not work with Windows 7. »

    Thank you for being a customer of HP!

  • Old camera software

    I just upgraded my computer to HP Pavilion dv6 - 6 c 48 with Windows 7.  I try to install the software of my

    Digital camera HP Photosmart R607, but I get the message that I do not have administrator rights.  When I check the computer

    He said: I am the administrator.  Also, can I install the software on Windows 7?  I'll have to junk my camera?

    Thank you

    Charl

    Sorry, that didn't work.

    Unfortunately, a lot of hardware that worked on XP does not work with Windows 7 - specific printers and scanners, and I think that too many cameras.

  • HP PHOTOSMART M425-PHOTOSMART ESSENTIAL-WINDOWS 8.1

    I have a HP Photosmart M425 camera.
    When I had Windows XP, I used the PHOTOSMART ESSENTIAL software and I was able to download the audio recorded in photographs.
    Now, with Windows 8.1, I can no longer use PHOTOSMART ESSENTIAL.
    How can I do?
    Thank you.

    Okay, I have a M425 so I'm not aware that he can attach a separate audio clip to an image. Very interesting however and useful for creating slide shows and videos.

    HP Photo Creations is printable projects only. It has no audio capabilities.

    You will need to use another program to use audio clips.

    IF you have a Photo Essentials installation disc, you can run in compatibility mode. That's according to HP in this video.

    I think that HP took down the link to download Essentials like only creations now rises. You will need to go to a third party site to catch him. But using this kind of thing at your own risk.

    Hope that helps.

  • Problem with video playback in adobe CS4 pro first

    Whevener I put something in my video. Through it be either A fraps recorded video or a video shot by my camera... I put in the library and drag it to the stage. and when I play the video right in the first remains as a still image, but audio playback. It does this with 2 methods I tried (Fraps and my Photosmart M537 camera). I asked my uncle (who had the same issues with the CS3 version) and he said that something wrong with the Codec of theres sure hes. I think it's because when I put my video I had recorded with Hypercam 2. It has worked well. Could someone help me please?

    1. research of fraps - a lot of problems, a few success stories forum

    2 what CODEC is used for Photosmart M537 camera?

    If it is a camera that has a video mode, you might have to convert it to AVI DV type 2 with its 16-bit 48 kHz

    A link with a lot of ideas on the computer to install http://forums.adobe.com/thread/436215?tstart=0

    A lot of ideas on the following link are generic, they have contributed to some Non-first users solve problems
    Work through all the steps (ideas) at the http://ppro.wikia.com/wiki/Troubleshooting

    If your problem is not resolved after following all the steps, report with the PRECISION required in the questions at the end of the troubleshooting link

  • HP photosmart 735: software for camera digital hp photosmart 735

    I have an older model device a hp photosmart 735 w/dock.

    A few months ago, I got laptop. I seem to have lost my software disc and without it I can not download my pictures from my camera. Is it possible to get a new drive or download. I tried to see if I could find under drivers, but when asked what are the technologies that I use, that there is no option for Windows 10.

    Someone please help.

    Thank you

    Walid

    Hello

    It is a very old camera that has:

    • Internal 32 MB of SDRAM
    • Internal 16 MB FLASH
    • A card slot Secure Digital (SD) or MultiMediaCard (MMC) memory taken in charge (all sizes up to 512 MB).

  • Photosmart 5510: Brick of power inside the camera moves around

    This support site is just terrible first, been trying to support by email for almost an hour and just because I'm not at home I can't contact anyone because I have no serial number... not cool at all!

    I have a photosmart 5510, I noticed when I plug in the power cord to the rear of the machine, I can feel the brick of power inside move around, in fact, it is totally not installed in place, I never heard a brick power did this before it is inside an electronic device, the thing must be screwed or something.  I wanted to know if it was normal for this machine, or there's something wrong with my machine.

    It works fine, no problem.

    Thank you

    It is normal, because the power inside the Photosmart brick could be removed, in which case the power brick fails.

    Figure 1. The back of the Photosmart camera.

    Which look just above the power connector, there is a small screw or bolt. When you use a screwdriver then is posible to remove that cover and find the power brick.

    Figure 2.  How to turn the screwdriver to open the power module.

    Attention: If you want to do this, please first POWER OFF and REMOVE the CABLES from the rear of the Photosmart camera.

    But it is normal that brick inside power moves a bit.

    Hope this information helps you

    * Click the stars KUDOS to say thanks

    * also click on the Solution button if your question is answered.

  • Photosmart 385 slow printing from the camera

    I have a Photosmart 385. When printing from the camera, it takes a long time to finish printing. No computer involved, it is used as a stand-alone printer for photographs. Thank you.

    HI Einarrson,

    Looks like the card you are using is having some problems. You have another memory card, you can try?

  • Installing the software digital camera HP Photosmart M627 CD Compatible w/Windows 7

    I switched from Windows XP to Windows 7, a year ago and digital camera HP Photosmart M627 (model L2420A) and the installed software CD originally was not compatible with Windows 7. So, I have not been able to download pictures from my camera to my computer to store and/or customize.

    I tried other photography software, however, I definitely prefer the software designed to work with my camera. Anyone can learn how to navigate the site Web (HP) to locate the same? Thanks in advance!

    Dell Dimension 5100, Windows 7 Ultimate Intel (r) Pentium 4CPU, 2.80 GHz GHz 2.79, 200 members, 32 bit OP,

    SP1; Google/Firefox 29,0.

    SweetFacz75

    Hello

    We now have new cameras almost every two weeks and all phones that can take pictures that why, after a few years, sellers don't update their software because VERY expensive to support the dying products. If you need a photo editor, many free good software around software:

    http://graphicssoft.about.com/od/pixelbasedwin/TP/freephotoedw.htm

    Kind regards.

  • Cannot use digital camera Photosmart M415 on Windows 8 OS.

    Hello, all. My new laptop can I 8 does not work with my Photosmart M415 digital photo camera. HP support told me the camra is obsolete, but I still love it. How can I run on my system 8 can I get? Thank you...

    Thanks for the reply. I have a new laptop of Toshiba Satellite L55 series. The card in the camera is slim, almost square 1/2 or 3/4 ". I don't see a slot in my computer that fits that. I suppose an adapter (which you mentioned) might do the trick. I consider the question.

    It would still be the wedding if I could just plug my camera with a USB cable that I used to do. Of course, I could still use my old laptop XP if necessary therefor. I think that the problem is not being able to download a driver for my laptop Win8. Thanks for your help.

  • HP Photosmart R927 digital camera 8.2MP does not

    Oh, help. I need to buy a 'new' mother HP camera digital sort of similar to the one she had for years. -one that is COMPATIBLE WITH Windows 7. I think that this HP Photosmart R927 8.2MP camera might be just the answer, but when I continue to check on the COMPATIBILITY PROBLEM, I get all sorts of different answers - including some very 'vague' responses on the sites HP themselves. I can't LOSE MY LITTLE money and later discover that - Oh, NOT REALLY will work with Windows 7 after all - SO PIS, Buddy. Any actual Experts out there who know how to find the truths?

    Hello

    1. what exactly happens when you plug in this device?

    2. you get any error message?

    3 - is the camera not detected in Device Manager?

    I would suggest you follow the given steps and check if it helps

    Method 1: Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

    Follow the link below a convenience store opened.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2: also I also suggest to return the item and try to run the troubleshooter and check if it helps.

    Tips for solving common driver problems:

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

    See also:

    Automatically get recommended drivers and updates for your hardware

    http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

    Reference:

    http://www.microsoft.com/Windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Photosmart%20R927%208.2MP%20Digital%20Camera&v=HP&uid=L2056A&l=en-US&pf=4&pi=3&c=Cameras%20%26%20Photo&sc=Digital%20Cameras&os=32-bit

    Hope this information is useful.

  • How can I unlock the memory card for camera hp photosmart to m11

    Hi, just need to know how to unlock a memory card for a camera HP photosmart m22. Attempt of deleting photos to the card and don't have any chance. Get locked memoru card message

    Hello

    Could be that the card has been locked. Check the lock on the left side of this image (the white end cap), then unlock it.

    Kind regards

Maybe you are looking for

  • transfer data from Tiger Mountain Lion

    I'm trying to move the data from my old powerbook that has OS 10.4.11 on my MacBook Pro OS 10.8.5.   Can you help as well as most offer effectively and easily do this?

  • Black screen on my Satellite L555

    Hello After having warmed my computer Toshiba Satellite L555 - 11K truned off and since nothing appears on my screen. The computer starts normally but the screen remains black. I connected an external monitor and it works perfectly. When I do FN + F4

  • Tecra 8000: battery not charging

    I have a laptop Toshiba Tecra 8000 works excellently on the radio but cannot get a battery charge! I have 2 new batteries, but when I go to power options it says battery not detected. However if you pass the sector off the power the computer will run

  • HP Envy 17 t: what size usb drive is necessary for the recovery of HP Envy 17 t 10 (64-bit) Windows?

    I just installed my HP Envy and wanted to set up a recovery disk.  The USB key must be less than 32gigs, but the example has not been updated for Windows 10 the instructions say.  It shows a recovery screen for a laptop of Win8 with the source of rec

  • envy j120us usb 2.0 does not?

    I bought this computer and after I installed w7, I have been able to us my USB is 2.0, I was under the impression that it is backward compatible? How can I fix it?