Port of h.323 using VirtualCenter Consolidation
Salvation communities,.
I would like to know if anyone knows what h.323 port, we must open inside the firewall to communicate with a demilitarized zone. We open almost the mention of different ports elsewhere...
Domain TCP/UDP 53
Kerberos TCP/UDP 88
UDP 123 times
UDP 137 NetBIOS-ns
TCP 139 NetBIOS-ssn
LDAP TCP/UDP 389
TCP 3268 for Global catalog LDAP
Communication TCP for DCOM/RPC 135/445
But when we launched an analysis on a computer in the DMZ, VirtualCenter return an error like unable to communicate with the server. I was working with network admin and it says the server inside to try DMZ randomly a port h.323 to communicate with VirtualCenter.
We cannot install an another VirtualCenter inside the DMZ. So you really have to open appropriate ports in order to complete our Consolidation.
Thanks in advance
Concerning
Eric
Behind the scenes, Guided Consolidation using Capacity Planner, who need these services to tal to Windows machines. I think that is where your problem is.
-KjB
Tags: VMware
Similar Questions
-
want to connect Apple TV but HDMI port is already in use. Y at - it a triangle connector I can buy or?
Sorry but no.
Apple TV requires an HDMI cable and a HDMI port.
-
Headphone port Broken, seek to use the MIC for the sound port
Hey,.
I have a laptop of 640 m Ispiron with Windows xp.
I'm sure that the helmet is broken, anyone know how to get the audio output for headphones microphone Port?
Is it possible to pass the customs of the ports?
I use the SigmaTel card, I don't know the model.
I was looking through the forums and I found this:
http://dellcommunity.com/supportforums/board/message?board.ID=insp_audio&message.ID=29912
I gave it a try but it wasn't what I wanted, either he did not because I cannot hear anything through my mic port yet.
Also I can not all the sounds down my laptop speakers, I'm sure its because audio is stuck on the helmet, I tried to push the helmet a few times it triggers to speakers, but this is a no go!
I know the speakers work because I could hear the sound when I did the thing Dell Diagnostics.
Message edited by Kablamtron on 05/22/2008 10:49
-
Error while you're using backup consolidated backup
Hello
We are facing a problem with the servers while using backup consolidated backup.
When the backup runs through scritp, it just create a snapshot of the server of th. and the name of the hard disk goes from the original for example abc1.vmdk to abc1 - 000033.vmdk
There are several snapshot files. Like this.. which is not allowing us to make the backup
I tired to change name to onec .vmx files HARD drive system startup and original. but its still looking for the other snapshot, VMDK fies
PL. help.
Thank you
Smail
If you go into the directory of the virtual machine and "mv vmname.vmsd vmname.vmsd.old", then delete all the snapshot files since you can not use the more anyway, then you should be able to successfully take a snapshot of the virtual machine and then delete it (aka "remove all" in the Snapshot Manager).
In the future, just move the file to another name vmsd, then create a snapshot and delete all snapshots. and it should solve your problem. Starting the virtual machine on the "basic" disk will result in losing you any data that was in the virtual machine, since the first snapshot was taken.
-
VM backup using VMware Consolidated Backup
Hello
I have ESX 3.5 Update4
can someone explain pls howto backup computer virtual using VMware Consolidated Backup?
Well,.
There is a "VCB" that can be used in the COS of your ESX by running the command as shell vcbMounter. But most of the people using the Windows package "VCB 1.5" so just install it on any windows machine. Don't forget that you need disk space for storing images FullVM or a connected tape drive is required.
After installation, change the config/config.js to match your needs. It provides some general parameters and default values. If you use a San or any iSCSI storage do not forget to run "diskpart automount disable" and 'diskpart automount scrub' first befor all required LUNS mounting.
Now start playing with vcbMounter.exe. Remember that by default I have '-san m "is used which try to read data directly from the SAN. If you do not have a SAN using "m ndb" rather than transfer the data via the ESX host.
VMware provides some PDF documents on the use of VCB and also the "my learn" section provides useful information.
DOWNLOAD: VCB 1.5
http://www.VMware.com/files/PDF/vcb_best_practices.PDF
http://www.VMware.com/PDF/vi3_35/esx_3/r35u2/vi3_35_25_u2_vm_backup.PDF
Best HOWTO ever:
http://VIOPS.VMware.com/home/docs/doc-1392
Concerning
Joerg
"Don't forget if you found that this or other useful answers do not forget to assign points by scoring a useful or correct answer."
-
Win Server 2003 Sp2, "port 808 is in use"
I tried to install Oracle XE 11.2 (after the abduction of Oracle XE 10.2) and I get this error "Port 808 is in use... ", but I get this error for any port I choose...
How to solve this problem?
concerningAlso, make sure that there is no antivirus or anti-malware software.
-
I have an isa Server 2006
I want to use the vpn connection and and limit internet access bandwidth:
1. suggest a pdf for learning about this
2 - to use web isa management utility which port should I use?Ask in the forum ISA Server:
http://social.technet.Microsoft.com/forums/en-us/Forefrontedgegeneral/threads
-
Configure the port error: resource in use
I can't print from my laptopm. All the settings seem to be good, it says even when I physically connect laptop to the printer the printer is offline (I checked the print queue of the printer and made sure he didn't say 'use printer offline'). Looked up troubleshooting info and tried to re-enter and remove the printer in the printer properties port, but it keeps giving me an error message "resources in use"... where can I go from here?
Hi angio987,
I see that you are unable to print from the laptop. I can help you.
Try a different USB port on the laptop, make sure that the printer is connected directly to a wall outlet. You may need to try another USB cable to exclude.
In the meantime, download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. Find and fix common printer problems using the tools of diagnosis HP for Windows?
If you are having problems with the properties of the printer, your best bet would be to uninstall and reinstall the printer software. Disconnect the USB cable first.
What is the name and the product number of your printer? How can I find my model number or product number?
What operating system do you use? How to find the Windows Edition and the Version on your computer.
Please provide detailed results if you're still having problems.
Have a great weekend!
Thank you. -
port invalid when you use Skype video option
I am trying to set up my webcam on Skype, but I get an error saying invalid port. I can't pass this point, can you advise what I need to do. I use a dongle broadband mobile, my service provider (3) says that it is configured to use Skype, so this isn't the problem. Help, please
I am trying to set up my webcam on Skype, but I get an error saying invalid port. I can't pass this point, can you advise what I need to do. I use a dongle broadband mobile, my service provider (3) says that it is configured to use Skype, so this isn't the problem. Help, please
I am trying to set up my webcam on Skype, but I get an error saying invalid port. I can't pass this point, can you advise what I need to do. I use a dongle broadband mobile, my service provider (3) says that it is configured to use Skype, so this isn't the problem. Help, please
Feet2FI am trying to configure my webcam CyberLink V 2 together on my laptop HP on Skype, but I get an error saying invalid port. I can't pass this point, can you advise what I need to do. I use a dongle broadband mobile, my service provider (3) says that it is configured to use Skype, so this isn't the problem. Skype has say it isn't their problem did Cyberlink. Does anyone else have this problem, and how can I solve it. I use Norton Security, but I tried switching OFF but still no joy. I use the software for windows vista 32 bit Home premium. Help, please
Thanks Brian, I managed to fix it myself by accident, whatever it took, it was when choosing installation of the webcam on Skype option, I selected default webcam instead of Youcam, and then uninstalled Skype and restarted my laptop and reinstalled Skype on their site, the work done. Hope this might help someone else amateur in the future.
Thank you very much. 72sqm
-
Hello
I have trouble with two U2415 SSS monitors that I bought this week, when I plug headphones into the monitor there is a low volume generated from the monitor. When I plug the headphones in the respective computer audio port, there is no whistle - just silence.
It is not a problem when playing sounds, but saw the helmet wearing while there is nothing else game is boring and it is hard to focus.
The sound comes on displayport monitors, and the volume is controlled by the operating system (Win10 / OSX via soundflower).
The computers and monitors are all on the same land/Jack.
Is it possible to fix this? I am at a loss, and frankly the audio port on the screen is useless in this State. It would be nice to make it work, because it would mean that I could reduce the number of cables, I need to plug / unplug it when you move stuff.
Please find below information on the installation of my computer (s).
The computers tested: Custom PC with nvidia gfx, MacBook pro, Asus Zenbook
* OS: Windows 10, OS x 10.10
* Video card: Nvidia GeForce GTX670, Intel Iris Pro 5200, GeForce GT 840 M
* Driver version: Windows Nvidia 355.98, for OSX I don't know
* Ports: PC: displayport and dvi, mac: lightning/miniDp, zenbook: miniDp
* Ports used: dp-> miniDp, miniDp-> dp, miniDp-> RFP
* Cable: the miniDp provided-> dp cable and a 1 m deltaco miniDp-> dp cable
* Resolution: 1920 x 1200 @60 HzBest regards
ErikHeadset must be connected directly to the computer, not on the screen. The U2415 user's Guide page 11 States, "use of the helmet is not supported for the line audio output connector.".
-
WampServer: Your port 80 is actually used by Microsoft-HTTPAPI/2.0
I NOTE: WampServer has no relationship with Microsoft, but the problem has...
Hello world
I uninstalled WampServer 2.5 and installed WampServer 3.0 on my Windows 7 SP1,
The WampServer icon color is orange, which means that one (Apache) service is not running.
I used the 80 submenu test port and cmd gave me this:
A test that uses port 80 *.
= Put to the test by the netstat command filtered on port 80 =.
Test TCP
Your port 80 is used by a process of PID = 4
The process of PID 4 is 'System' Session: Services
The PID 4 service 'System' is "N/a".
ERROR * this service ISN'T Wampserver - should be: "wampapache;Test for TCPv6
Your port 80 is used by a process of PID = 4
The process of PID 4 is 'System' Session: Services
The PID 4 service 'System' is "N/a".
ERROR * this service ISN'T Wampserver - should be: "wampapache;= Tested by attempting to open a socket on port 80 =.
In fact, your port 80 is used by:
Server: Microsoft-HTTPAPI/2.0
Press Enter to exit....
Microsoft-HTTPAPI/2.0 is the Internet Information Services (IIS) , but there's something funny...
She has been disabled before!
Also I have disabled the Windows Service activation process to http://forum.wampserver.com/read.php?2 view, No.8 134915
I even tried to change the port 1080 and the bar state become green but after trying to install the apache service he gave me the
In fact, your port 80 is used by:
Server: Microsoft-HTTPAPI/2.0
So, what's the problem?
I found the problem!
Microsoft-HTTP/API/2.0's not just IIS,
Microsoft SQL Server Reporting Service !
Disabled it and apache installed successfully.
Please help anyone!
-
Can switch ports Sg300 52, I use all ports of 52 at the same time?
Hello
Does anyone know if all the ports on the SG300 52 can be used? Or allowing a link rising port SFP neutralizes an access port?
I know sometimes under the hood that the SFP ports share the same hardware that 4 last access ports so they are mutually exclusive, but I can find no record of the architecture of these switches.
Thank you very much
Tom Whittle
Hi Tom,
Yes, G51 and G52 ports are ports combo with SFP slots. FPS has a higher priority, so RJ - 45 would be disabled if you connect miniGBIC on port next to him.
Data sheet contains information about ports combo. If you have a switch in front of you there is a feature on ports which basically says that it is a common interface.
I hope this helps.
Alkesandra
-
Another question on the exception of 'Port of SMS already use' in
I found a lot of discussion about the exception 'SMS Port already use' in. My question is this:. Say an application opens a port SMS and ends abnormally without closing. The unit will continue with the exception of 'Port of SMS already in use' up to reset the signal? is there a way to clean the orifice opened without a reset of the device?
I need to listen to a specific port and from what I've read, even the datagram method allows one connection.
Hi scoleman2272
This KB article explains how to use the connection of datagram. This works for listening, the reverse is also true however for sending.
I hope this helps.
Concerning
-
Hello community!
I'm fairly new, when it comes to firewalls, but I have some experience with routers and switches, so I'm not completely lost.
Practically, we all know that a group object is a large bucket to throw things and then managing them as a single group, which is very useful for many reasons... so is there something similar that we can use in an ACL for the port?
Say so, let that I want to allow the following ports:
- 80
- 443
- 25
- 30500
- 20500
- 8080
- 14600
- 21
- 753
- 22
And instead of doing something like this:
dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 80
dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 443
dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 25
dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 30500
dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 20500
access-list extended dmz_access_in permit tcp host WEB host WEB-EXT eq 8080
dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 14600
dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 21
dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 753
dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 22
do something like:
dmz_access_in list extended access permit tcp host WEB host WEB-EXT eq PORT_LIST1
Thank you!!
PD: Excuse me if some port above are not TCP, if just one example. I just start typing all the numbers that came to my head.
Hey Rolando,
On a SAA, you can combine services and protocols based on the source/destination in an object-group service oriented. Your example would look like this:
object-group service PORT_LIST1 service-object tcp destination range 21 22 service-object tcp destination eq 25 service-object tcp destination eq 80 service-object tcp destination eq 443 service-object tcp destination eq 753 service-object tcp destination eq 8080 service-object tcp-udp destination eq 14600 service-object tcp destination eq 20500 service-object tcp destination eq 30500
You can create also integrate groups:
object-group service WEB_PORTS service-object tcp destination eq 80 service-object tcp destination eq 443 object-group service PORT_LIST1 group-object WEB_PORTS service-object ...
This type of group is going where the Protocol is specified in the ACL:
access-list dmz_access_in extended permit object-group PORT_LIST1 object HOST object EXT-WEB
-
EchoLink error-om 1 port is not availible use your push to talk button
On my program of the Echolink each time I open I will give me an error; com port 1 is not availible use your push to talk button!
How activate this... also the media cannot. Thank you!Moved from feedback
Original title: software
Hi Kane,
Thanks for the reply.
What version of Windows 7 are you using?
I suggest you to install the application in Windows XP compatibility mode, this might help you solve the problem.
Make older programs run in this version of Windows.
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
I hope this helps.
Maybe you are looking for
-
Need instructions for older iPod
Please let me know if you have any kind of instructions for the older iPod - one that is approximately 4inches 4 inches,
-
problems connecting to netflix
I cannot connect to netflix, it was ok the first couple of times I tried it, but now it is said, cannot connect. Please try again later
-
Good afternoon, and pardon the interruption. My name is Raymond Johnson Jr. and I was just curious to know what the serial number for a router E900 was and where I could buy the product. However, I also try to find out if the update of the firmware h
-
I received a notification of the presence of the virus in my tracking system which resembles an unsolicited AV online scan (which I haven't started). Therefore, I try to look for infection and so I run regedit: computer > HKEY_LOCAL_MACHINE >SOFTWARE
-
I have nothing else problems with my new system had in the past 2 months and have done two factory restores. I get the "your video driver has failed but recovered" several times a day, it progresses freezing and, sometimes, the old bue screen. I wo