Portege R500 - Windows XP 64-bit work?

Similar Questions

• Portege R700 - Windows 7 32-bit - NETWORK adapter driver does not work.

  Hi all

  I rebuilt a Portege R700 with Windows 7 32-bit o/s. I downloaded the drivers from the Toshiba site but could not get the only rider listed working card. It seems to install ok but will not work. If I try to 'put to date pilot' with Device Manager and point to the files expanded, he said that the required software is not found.

  Is there a driver that works and can someone tell me where it is please?

  Concerning

  Dave

  > No idea what driver NETWORK card works and also which driver, I need for the controller PCI of communication Simple?

  This seems to be the controller of Intel AMT.
  You can download the driver form Intel page.
  Search for Intel AMT or check this link to the page of the Toshiba driver:

  [Intel Management Engine Interface | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct = 5379 & selSh ortMod = 1019 & language = 13 & selOS = 29 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 75561 & OSI D = 29 & driverLanguage = 42]

• Portege R500: login screen don't work with fingerprints

  Hello!

  I have Toshiba Portege R500.
  When I used Windows Vista - I have a problem.

  Now I install Windows 7 and therefore: If the laptop was restart or stop - on the windows login screen do not biometric.

  Only enter password at the keyboard. If put into hibernation or sleep - everything ok, biometric works normally.
  I try Windows 7 32-bit and 64-bit.
  Same problems.

  Help me, pls.

  Hello

  Please try to install the new software of fingerprints for Win 7.
  AFAIK the R700 protégé was equipped with fingerprint too.
  Try the software of fingerprint for R700.
  It s version 1.0.2.27

• No driver controller network for Portege R500 (Windows XP)

  Hello

  I don't understand why Toshiba does not have the drivers needed to make a new Portege R500 WLAN works. I have absolutely no ability to wireless networking, as if the switch is off, and I have a yellow question mark in Device Manager of Windows ("other devices", "Network controller"). Windows can't find a driver on the restoration of two CDs and trying to install all of http://aps2.toshiba-tro.de/wlan/?page=downloads doesn't help either.

  Someone manages to find the drivers to fix this 'Network controller' for a R500 Windows XP? Maybe that my device has a hardware defect, because I can't believe this WLAN for XP support is not provided, out of the box or at least by downloading files on the Toshiba support site

  Thank you
  Olivier

  Hello

  It is strange for me to read your ad one thing. Can you explain what you mean with: Windows can't find a driver on the restoration of two CDs.?

  As much I know restore CD/DVD is not a kind of collection driver but the recovery image that you can use to clean operating system installation. Can you please tell me what restoration (recovery) CD you have? Are two of them for an operating system, or you have one for Vista and one for Windows XP Home edition.

  I checked Toshiba's support page and it has a WLAN driver version 11.5.0.32 / 9.0.4.37. Download and unzip the driver files and before you start installing check readme.txt file first.

  Moreover, for the installation of Windows XP Home edition please use the Instructions of facilities document and follow order listed facilities.

• Portege R500 - utility of fingerprint stopped working

  I have a laptop Portege R500. The utility of fingerprint stopped working. First (perhaps after an update of the real Suite Acess Manager was installed a few months ago) it did not work when connecting, but worked for the other passwords.

  Now it doesn't work at all. If I try to record fingerprints, told me that he has failed to locate the sensor. I reinstalled the driver AES1610 and TrueSuite access manager, but it makes no difference.

  In Device Manager it says the device is working. I looked at different threads on this without seeing something that works.

  Hmm, maybe you should try to clean the registry once the fingerprint software has been uninstalled.

  In your case, I would follow this:
  -Uninstall fingerprint software and remove the fingerprint device in Device Manager.
  -restart the laptop
  -clean the registry using the free tool called CCleaner
  -Restart once again and install the software and driver
  -Restart once again and test the functionality of fingerprint

  Welcome them

• Portege R500: external monitor does not work with the Port Replicator Port 2 and DVI

  I have a Portege R500 running Vista with a slim Port Replicator II and digital monitor Viewsonic.
  I connected the monitor to the DVI port on the port replicator and got it to work OK.
  Press fn + F5 would switch between the computer screen and the external monitor.

  Then it stopped working, and I can't make it work at all. F5 recognizes just the laptop screen.

  If I connect an analog display, it is fine, and I can pass between the two screens without difficulty.

  The strangest thing is that, if I reboot when the Portege R500 is docked, the digital monitor begins by displaying the boot sequence, but then the signal is lost as soon as the screen stops the display of the progress (in low resolution) bar.

  I spent an hour on the phone to support Friday, and he made me nowhere.
  They finished by saying that he should never have worked! So what is the DVI port because then?

  Any ideas?

  David

  Connect your monitor directly to your laptop and see if it is recognized and you can go through FN + F5 between the two views.
  If it works, then connect with port replicator, and then try again.

  It's probably best if you reinstall display drivers. Maybe there are new too on the download page.

• Portege R500 - Flashcard Toshiba has stopped working

  Hello

  I get this error "Toshiba Flashcard has stopped working and will be closed" when I start my laptop Portege R500.
  What is the cause?

  I'm running Vista and my PC continues to run even if it does.

  See you soon,.
  Elty

  Hello

  It's not easy to say what causes this problem.
  In most cases to other parts of the software may affect the functionality of different applications.
  For example, my flash card stopped working after Vista ran some updates.

  I simply removed the old VAP (value added package) of the system.
  I cleaned the registry and the system using CCleaner (free tool) and reinstalled again the VAP.

  Now everything works fine.

  I think you should try the same too.
  Remove the VAP and installed as the new VAP downloaded from the page of European driver of Toshiba.

  Check it out!

• Portege R500 - DVD is no longer working

  Someone at - it ideas why my DVD drive has stopped working?

  I have a Portege R500 - 11 c and in Device Manager I have a yellow exclamation mark against Bus USB controllers / USB Mass Storage Device
  When I click through for more details, he said:

  Location: Port_ #0004.Hub_ #0005

  "This device cannot start. (Code 10)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  Search for Solutions has the answer.

  It is strange because it is power to the player, when I put a disc in I can hear him pull up, but it becomes visible to the machine!

  Pointers would be useful.

  see you soon,
  David

  If a yellow exclamation point appears in the device, close the USB hubs\controller Manager, then a USB driver problem would be possible.
  In most cases, a new installation of USB might help to get rid of this annoying problem of USB.

  -Remove and disconnect all external USB devices that are connected to the laptop.
  -Go to the Device Manager and remove the USB hubs and USB controllers.
  -reboot the machine.

  New OS reboot should reinstall USB drivers, and the operating system should recognize the USB ports again. After this short intervention, connect the external USB CD. DVD player and check if it would show up in my computer

  Good bye

• Re: Portege R500 - FN keys no longer works

  Hello

  I have a laptop Portege R500, and suddenly the fn keys stopped working. I looked for off site Web from Toshiba, but no pilots have had no luck and also tried reinstalling the common Modules (I just re-installed, it is necessary to uninstall anything before hand?).

  I use the OS is XP SP2. I tried a system restore and don't really want to do a full system restore.

  Basically, I just want to get them working again.

  Any help would be appreciated and thanks in advance.

  Matt

  Hello

  The common Modules should be resettled in too, but it would also be necessary to reinstall the Hotkey utilities for display devices.

  By the way; You must clean the registry using the free program called CCleaner.
  You can download many Web sites. Google simply

  After use of this applications reinstall the common Modules and the Hotkey utilities for display devices.

  Good bye

• Can Windows Xp 32 bit, works correctly on a system with several concerts then 8 or more ram.

  going to use a HARD drive of 1 TB SATA 6GBS as a secondary system to run older games. wondered if the windows XP 32-bit system would operate properly with 8-16 GB of ram DDR3.  I don't mind that most of it would be unused using XP since it's just for older games are not compatible with Windows 7

  Hello
   
  Maximum up to 4 GB of RAM can be used under windows THAT XP 32 bit operating system, for your reference from the link below.
   
  http://msdn.Microsoft.com/en-us/library/aa366778 (v = vs. 85) .aspx #physical_memory_limits_windows_xp
   
  Hope this information is useful.

• Does the m - 105 palm with Windows 7 64-bit work?

  What are the hardware/software compatible with Windows 7 64 bit?  Try to reinstall the palm for the new cfomputer, but not sure this is possible. No COM port, etc.

  Thank you!

  Just FYI... in the years of the computer, three years is considered a lifetime.  12 years... is pretty much history.  :-)  But Kudos to you for those taking good care of your technology!

• Portege R500 - restarts instead of start, works only BIOS

  Hello

  My R500, a little more than 2 years, always restarts before starting XP in graphical mode.
  Sometimes also boot from the DVD. Access the BIOS or XP 'F8-Menu' is no problem...

  Maybe the on-board graphics chip could be wiped out, would you agree? Just before the problem I tried to connect a projector on the VGA Port (what I had done many times before without problem).

  Because somewhere on ebay, I spotted a device that seems to have the same problem, I have a little hope, it may be a known issue or someone has an idea about this?

  It's a great device, but atm I wouldn't money to buy a 2nd time... :-/

  Michael

  Hi Michael,

  It's really hard to say why this is happening and theoretically what could be the reason for this: bad drivers, virus, CPU, RAM, motherboard, etc.

  Before you think about exchanging your hardware, you must update the display driver. This is why start in safe mode and uninstall the display driver. After that, start Windows normally and try to install the new driver to display on the Toshiba site.

  You wrote that this also happens if you boot from DVD. Have you tested the Toshiba Recovery disk? Normally it it shouldn't t happen.
  Check this box!

• Portege R500 - DVD player does not work

  Hello
  I love my laptop Portege I bought this month of September. The only thing is that the DVD player is not working for some time.
  -When I put a DVD or CD, I realize I can't freely turn the disc in the drive while it is still open. Strange, but I don't see anything blocking the rotation of the disk.
  -The system does not recognize at all have a DVD player. Initially, it worked, I can't say exactly when it went wrong. I checked with Toshiba Assist: in the information panel, it shows no info on the DVD player, in diagnostic Panel, I have the opportunity to check the DVD but when the test system is just jump the operation all the time, indicating that the Player cannot be found.
  -In the control panel I don't see no more among the hardvers
  -For starting, the DVD is one last thing to check in my BIOS settings. But in fact when the start-up the laptop I can hear the sound of the reader looking for something inside, turning or trying to rotate the disc, but it seems always becomes stuck and starting takes like 5-7 minutes due to lengthy trials, get the DVD player work in vain.
  -Now even when I put the energy setting to oriented perf, I no longer hear the system would look for DVD (setting the player gets off everything when using not saving)

  Someone from Toshiba support could help me? Is it possible to check this problem with the remote connection to my laptop, or something? Or should I take it to the service? With this, I also have a little challenge: I bought my laptop in Hungary, but now I stay in Japan throughout the year. So I would need a station in Tokyo where they accept my European warranty. Could you please provide me with any help or ideas? If possible, direct mail also. Thanks in advance!

  > Could someone support for Toshiba to help me?
  To do this, you will need to get in touch with the Toshiba ASP in your country.
  Here in the forum you can get suggestions form common users because it s a user forum to ;)

  > Is it possible to check this problem with the remote connection to my laptop, or something?
  I doubt that this is possible since this could be a hardware problem

  > Or should I take it to the service?
  Maybe this would be the best

  > I need a station in Tokyo where they accept my European warranty. Could you please provide me with any help or ideas? If possible by direct mail also
  On the page of Toshiba Europe, I was able to find an info on TOSHIBA EMEA LIMITED WARRANTY for NOTEBOOKS.
  This warranty is applicable only in the EMEA region (Europe, Middle East and Africa) and can be executed in any
  Countries the EMEA where Toshiba or its Service providers allowed offers warranty service terms and conditions provided for in the present
  warranty. This warranty covers the costs of service parts and labor needed to restore your system to full operational status.

  As you can see in the Japan is not covered by the EMEA region :( So I doubt that the warranty will cover the costs to the Japan.

• Re: Portege R500: controller button does not work after you install the update

  After you have installed the latest version of Toshiba Value added Package, the two buttons (toshiba assist, and backlight power) do not work properly: they open instead a window of Firefox.

  I guess there is something to configure in the section "Optimizing" Toshiba Assist.
  When I open the program "Toshiba buttons functions" (sorry for the puny, Spanish translation, it is called: "functions of Toshiba botones") all entries are empty and I have to enter the Url of the program supposed to turn off the backlight of the screen of my LCD...
  I have no idea where to find this executable.

  Can someone help me?

  Why you n t use the OS restore option?
  The operating system supports the option of system restore and this helps to put the system in the previous point.

  Check, maybe it helps to get the old version of the Toshiba Package Value added.

• Windows 7 64 bit worked very well and when was time to save I get the cyclic redundancy check, I try several times and made the same thing I need help please

  worked very well and when was time to save I get the cyclic redundancy check, I try several times and made the same thing I need help please

  Hello Hans,.

  Thanks for choosing Microsoft Community!

  According to the description of the problem, you have problems when you use the backup on Windows 8 feature.

  Please answer these questions to better understand the issue and help you:

  1. are - what you're talking to backup and restore functionality on Windows 7?

  2 have you made any changes to the computer before the show?

  It is perhaps to cause bad sectors on the hard drive, run the disk check to repair bad sectors

  Check your hard drive for errors:

  http://Windows.Microsoft.com/en-us/Windows7/check-your-hard-disk-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  For more information:

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.