Portege R600 - BSOD with installed Dynadock U10

Similar Questions

• Portege R600-11b - cannot install Adobe Acrobat 9 - ActiveX problem

  I recently bought a Portege R600-11b and have tried to install Adobe Acrobat 9 on it by downloading it from the Adobe site.
  I spent many fruitless hours talk to Adobe to try to solve this problem.

  They concluded that my laptop is not compatible with the software.
  This isn't the case, that this laptop exceeds the specification of systems required in all aspects.

  The problem seems to be that it won't work ActiveX even after all the firewalls and anti-virus in disabled - I don't know hardly what to do - anyone has any suggestions please?

  > They concluded that my laptop is not compatible with the software.
  That s just absurd

  The Adobe Acrobat Reader software is a small application and can be installed on almost all computers and systems so that s certainly not a reason why you are not able to install this software.

  If this problem is related to the ActiveX, then you can change this in the settings of your internet browser.
  For example, using the IE7 you could modify this here:
  Tools-> Internet Options-> areas-> {}-> ActiveX controls and plug - ins area-> allow unused ActiveX controls to run without prompt

  You can also try to clean the operating system and the registry because the problem might be related to faulty registry entries.
  To do this, I would recommend using the free CCleaner tool.

  Finally and above all it s always advisable to consult the homepage of support from software manufacturers. Here you will find some documents on installation with the Adobe Acrobat Reader software problems.
  http://www.Adobe.com/support/reader/

  Check it out!

• Portege R600 - 13 X - installing the driver in Windows XP Home edition

  I create a business image of the XP custom for the portege R600 - 13 X and I was wondering if toshiba porovide a CAB file containing all fichiers.inf required for sysprep or if there is a stopped driver installation guide?

  When I re - seal and run installation module of mobile bradband minié ericsson don't re - not install correctly.

  Help, please

  Hello

  Here's the order to install Windows XP Home edition and I hope this will help you

  Windows XP Professional SP3
  Intel Chipset Software Installation Utility
  Intel Matrix Storage Manager
  iMSM Registory 20080303
  Intel Cantiga Vista driver
  Realtek HD Audio Driver
  TOSHIBA common modules
  Effect of Mic TOSHIBA
  ALPS Pointing-device Driver
  OnOff TouchPad utility
  Software TOSHIBA
  Driver Intel internal LAN
  Intel AMT Management Engine Interface
  Intel Wireless LAN driver
  Intel Proset (Shirley Peak)
  Atheros Wireless LAN driver
  Atheros Client Utility
  Bluetooth Stack for Windows by Toshiba
  Logon Key TOSHIBA wireless
  RICOH Media Driver
  TOSHIBA 3G RF Power Control Utility
  Ericsson 3G driver
  TOSHIBA HDD Protection
  TOSHIBA SSD alert
  TOSHIBA SD Memory utilities
  TOSHIBA SD Memory Boot Utility
  TOSHIBA Hotkey Utility for display
  TOSHIBA screen utility unit of change
  TOSHIBA zooming Utility
  TOSHIBA Power Saver
  TOSHIBA Mobile Extension
  TOSHIBA utilities
  Password TOSHIBA utility
  Wireless keyboard shortcut
  TOSHIBA ConfigFree
  PC Diagnostic tool
  TOSHIBA Assist
  TOSHIBA controls
  Sleep USB TOSHIBA and service charges
  TOSHIBA PC Health Monitor
  TOSHIBA cooling tool Performance Diagnostic
  CD/DVD Drive Acoustic Silencer
  Infineon Trusted Platform Module utility
  AuthenTec fingerprint utility
  Chicony Camera Assistant Software
  TOSHIBA security assist

  Good luck.

• Portege R600 - how to install XP on a new HARD drive?

  I did the mechanical installation of a new hard drive and it's correct.

  Now, I want to install XP - Vista not. However, nothing I've tried will allow the BIOS to recognize the new drive. 'Alternative media' drive of Toshiba XP should include the SATA drivers, but it does not work.

  What did I miss?

  Hello

  Do you mean the new HARD drive is NOT visible in the BIOS or the new HARD drive is not recognized by Windows XP Setup?
  Those are two different questions

  If the HARD drive is not recognized by the BIOS, then you used the disk HARD is not compatible.
  But if the HARD drive is not recognized by installing XP then you have not installed the SATA drivers that are packed in the Intel Storage Manager.

• Dynadock U10 goes into sleep to help with Satellite Pro C650-139

  We have several Toshiba in my work, we have 2 Toshiba Satellite Pro C650-139 with Toshiba Dynadock U10 (PA3575E-1PRP), and these moorings seem to go to sleep every now and then, sometimes, the screen freezes on the screen connected to the U10. Is there a solution? or just pass these stars?

  Hello

  Have you noticed that using the Dynadock as part of another computer/laptop?
  I asked this because it might be possible that your affected laptop connection settings between the laptop and Dynadock.

  To my knowledge, you can set the Dynadock standby mode but in this case the Dynadock would unplug the computer.
  In Dynadock options (in the task bar, click the Dynadock icon), you can find the Eject option and sleep. This disconnects the Dynadock and set it in standby mode.

  I think you should check the Dynadock with different USB ports.
  Deactivate the energy saving for the USB ports in your Win 7 power management settings.

  In addition, you can update the graphic driver for Dyandock.
  As far as I know, you can find the latest version of the driver here:
  http://www.DisplayLink.com/support/downloads.php

• Portege R600 - Windows 7 switch backlight does not

  I have a new Portege R600, comes with Windows 7 32 bit and the switch on / off for the backlight does not work.
  I installed the new VFR package, until I uninstalled the old. Also the latest version of the Bios.

  Use the support Toshiba button and placed in the file backlight.exe, still does not work. If I tap the backlight.exe file manually, it works.
  It is not a problem of material, as told in the hard drive of my old R600 with XP Professional and works of button.

  What can I do?
  Toshiba support is not able to help, to talk about the new facility, but is the original unchanged.
  Maybe in the button holder, I put in an option in the empty file?

  > Switch on / off the backlight does not work.
  AFAIK some BIOS versions contains the additional option to enable and disable the lighting.
  Please check if the lighting is not disabled in the BIOS.

  I also searched this forum for some tips and found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=127192

  Check it!

• Portege R600 cannot detect Toshiba Slim Port Replicator II PA3603U-1PRP

  Hi all

  My Toshiba laptop is Toshiba Portege R600 D260 with Toshiba PA3603U - 1PRP Slim Port Replicator II (REF: PA3603U-1PRP), the problem is "PA3603U-1PRP Toshiba Slim Port Replicator II can't detect the USB Port.

  I wonder that PA3603U-1PRP Toshiba Slim Port Replicator II is not suitable for Toshiba Portege R600 - D260.
  Please help me,
  My Skype: hau.vancong

  According to the specification of the laptop, with this notebook, you must use Toshiba Replicator Slim of ports with PA3681E-1PRP part number III.

• Portege R600 - Dynadock displaylink installation failure

  I tried to install drivers 2.3 for a dynadock USB DVI, for use with a Portege R600.

  Whenever I tried, the DisplayLink driver installation fails, which means that the connection with the external monitor does not work.

  A few error messages appear:

  "This file has no program associated with it for performing this action...". "- referring to DisplayLinkCore, something--the window is truncated.

  The second message:

  'Impossible to install DisplayLink Core'

  The Portege is under XP SP3.

  I saw a post [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=145077𣚵] which seemed relevant, but I can't at this point.

  I would appreciate any pointers on this.

  Great news. Thanks for this feedback!

• Re: Portege R600 - port replicator is compatible with regional products?

  Community of greetings from Toshiba,

  I need to buy laptops for several employees who are moving between the United States, the United Kingdom and the Middle East.
  The Portege R600 exist in all 3 markets, but each has a slightly different part number.

  The part number Replicator of compatible Port to the R600 is difference to the United Kingdom, the United States and the Middle East.
  Users would be able to dock their laptops in one of the 3 offices, because they travel extensively between each country.

  What's the Slim Port Replicator II (PA3603U-1PRP) and Slim Port Replicator III (PA3681E-1PRP) compatible with each of the products of the soil of Portege R600?

  United Kingdom Replicator of ports Slim Portege R600-11B (PPR61E-01G00CEN) III (PA3681E-1PRP)
  Middle East Replicator of ports Slim Portege R600-10 b (PPR61E-00F00MAR) 2 (PA3603E-1PRP)
  USA, Portege R600-S4201 PPR60U - 01700C Slim Port Replicator II (PA3603U-1PRP)

  Someone has an experience buy Toshiba products in the Middle East? Or needed to use Docking Stations in offices in several countries?

  Thanks in advance,
  Ted

  (I posted a similar request in the Forum we and receives no answer - http://laptopforums.toshiba.com/t5/Port%C3%A9g%C3%A9-Laptops/Port%C3%A9g%C3%A9-R600-US-UK-Middle-East/m-p/32060#M489)

  Post edited by: TedRNelson

  Hello

  I think that it shouldn't be a problem with the different Portege R600 in combination with the Slim Port Replicator 3.

  Portege R600-11b, R600-10 b belongs to the same series (PPR61E), that the R600 US belongs to the PPR60U, but this should t be a problem.

  As far as I know the different R600 from different regions are not really different (some belongs to the same series) as far as I know there could be a difference between some pre-installed applications and some modules as for example the card wireless network, but this should not affect the use of Slim Port Replicator 3.

  Cheers mate

• Portege R600 - what someone has installed OS FreeBSD

  Hello

  Someone trying to install freebsd on portege r600? BSD recognizes material etc...?
  All the problems? etc...

  Any experience and responses will be appricieated.

  Thank you.

  Hello

  Unfortunately I m not a R600 owner but in my opinion it shouldn't be a problem with the installation the most common devices should be recognized

  But of course you will not be able to install Toshiba special tools and utilities that are designed specifically for the Windows operating system.

  See you soon

• Portege Z930 - boot with Dynadock docking station problem

  Hello!

  I wonder if anyone here can help.
  It seems impossible to start than my Z930 with the Dynadock (U3.0) attached to it.
  All I get is a blank screen - casting in and external screens are dead.
  Disconnect the Dynadock at this stage has no effect. I have the hard reset of the laptop.

  If I start the Z930 without the Dynadock attached I have no problem - and then I can join the Dynadock and all work just fine.

  So, it is right at boot.

  All the drivers are up to date.

  Is it the way it is supposed to work? Really? Seriously?

  Alex

  Dynadock is designed to work with laptop and this question should not happen.
  Can you please tell us a little more about your laptop?
  Do you use your Portege with factory settings (original preinstalled OS)?
  Which driver Dynadok do you use?
  I assume that in the beginning, everything was OK. Have you noticed this problem a few days later?
  Tell us a little more on the whole issue.

• External monitor display problems with Dynadock U10 on PC Toshiba laptop Win7

  I just started with my current compnay and they allocated me a new from Toshiba Satallite laptop running with Windows 7 64 - bit operating System.

  They hooked me up a Station of reception Dynadock U10, separate keyboard and a mouse and a monitor external 22 ".
  I experienced a problem of compatibility with some software, but I currently have a major problem with slow internet pages freezing or general display issue when the VGA is connected to the docking station.

  The laptop works fine when the VGA is connected directly to the laptop. I have download the recent software/driver upgrade loaded 18 (TC30322400A) without fixing the problem.

  I also loaded the upgrade diplaylink 5.6.31548.exe, as mentioned in other forums, once again, without success.

  Any help would be appreciated.

  Alex

  Are you using the latest driver?
  In my opinion you should not update BIOS.

• No Audio or USB ports with Port Replicator 3 and Portege R600

  I have a problem between my Port Replicator 3 (PA3681E-2PRP) and my Portege R600-13 X (Win7 Pro 32-bit). Everything has been working well for the past few months until a week ago. My PC has developed a problem then that plugged on the Port Replicator, it will not recognize something new that is connected to the USB (two PC & Replicator ones) ports, the Replicator audio output no longer works and the PC hangs during shutdown. Everything is OK with the PC when booted without the Replicator, but as soon as it is connected to the port replicator, in this case.

  I tried looking for information about this problem, but nothing helps... Any help to fix this would be greatly appreciated as it is to set up a business and I need it to work properly.

  A few things to try:

  Reinstall the Toshiba Value Added Package.
  Use system restore to restore Windows to a previous state.
  Check the connector for docking station for damage.
  Back up your data and perform the recovery.

  If its still does not, then I would send the laptop and the Port Replicator Port for an ASP for repair.

• Portege R600 of fingerprint problem: error: could not open the specified database

  Hello

  I am trying to give the registration of fingerprints for my Toshiba Portege R600-101 and I get the above error.
  I tried also on windows XP and Vista.

  Has anyone with the same problem or anyone suggesting a solution?

  I uninstalled the truesuite Access Manager but still the same problem.

  See you soon.

  Hello

  I noticed a new update for software fingerprinting for protected R600.
  Remove the old application of fingerprints, restart the laptop, clean the registry and the system using a 3rd party too (CCLeaner is free and not bad).
  Then reboot again.

  Download the fingerprint on the page of the European driver Toshiba Software and install again.

  Check it out!

• Portege R600 - where can I find the order of installation on Vista x 64?

  Hello

  I'll try to find a document that we'll know what order I should install my Portege R600 drivers and applications, there was one but I can't find it anywhere.

  Any help would be appreciated.

  Regards, Richard.

  Hello

  There is no special installation instruction details, but if you want to install the 64 bit Vista drivers then I recommend you start with the common as drivers:
  -Chip Set Utility
  -Display driver
  -LAN Driver
  -Driver Lan Wireless
  -Sound Driver
  -Intel Active Management Technology (AMT)
  - and so on...

  Please note that the laptop supports the SATA HDD controller and you need to install and include the SATA driver while the Vista Setup program.
  The SATA driver is part of the Intel Storage Manager.