Possible standby or Hibernate problem

Similar Questions

• R60 Eve + hibernate problem

  Hi all, I have Windows XP Pro installed on my R60 and I can´t do the sleep or Hibernate mode. I have the new installed power management driver and I Don t have the option of standby or Hibernate in the menu stop. Also I have the possibility of FN + F4 paused, and the lid closed sleep option value but it doesn´t work... Can you help me please?

  Hello Thinkpatz,

  I have this solved my problem of Hibernate. I reinstalled an application that I work with and now standby and hibernation works very well. I thank very you much for your help and advice.

  Good day.

• What is malware and how do you know if it affects your pc? Is it possible to solve the problem?

  What is malware and how do you know if it affects your pc?  Is it possible to solve the problem?

  Definition of malware from Wikipedia.org

  Malware, short for malicious software, is made up of programming (code, scripting, active content and other software) designed to disrupt or deny the operation of gathering information that leads to the loss of privacy, or operating, access resources system and other abusive behavior. The expression is a general term used by the professionals for a variety of forms of software code or hostile, intrusive, or annoying program.

  One of the best (and FREE) ways to prevent it from running Microsoft Security Essentials, which will scan your (s) and eliminate the bad guys you can be picked up when you surf, opening files is sent to you etc..  Of course security software is only good if it updates often with the newly found bad, but MSE update daily and you can set to sweep once per day or more.

  http://www.Microsoft.com/en-us/security_essentials/default.aspx

  I suggest that you download and install, then let run a FULL scan and see what it finds.

• Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

  Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

  Error 43 https://forums.adobe.com/thread/2070909

• Satellite A100 Hibernate / Standby wake up problems (does not work!)

  Hello

  I have a Toshiba A100 Satellite PSAARA-055007 with Win XP Home SP3 and updates.

  For the life of me, I can't get this machine to success waking up from sleep mode or Hibernate mode!

  He goes into hibernation and sleep just fine, but when you try to start it back or out of hibernation or standby it seems to start to wake up and then it crashes just without the screen never turn it on. The only option is to difficult start-up of the system.

  So now standby or hibernation function not at all.

  Anyone? Help, please!

  Have you noticed the same behavior in the past?
  Maybe an upgrade of Microsoft is responsible.

• Lenovo WiFi question and Standby / Hibernate problem

  I have a Lenovo 3000 v200 laptop under Windows XP SP3 (recently retired).

  It is fully updated with all Windows updates and updates from Lenovo and no change in

  material has been done.

  I have two annoying problems. I searched the forum good responses

  (many other users seem to suffer from similar problems) but no solution has been

  presented.

  1. my wireless connection works 95% of the time without problems.

  But occationally the wireless fails to launch when I start the PC.

  I have nothing bring WiFi on, only a reboot will solve

  the problem. I tried to play around with the options available

  via the WiFi software without success. Some networks are visible

  even if the hardware and software WiFi switches are 'on '.

  Device Manager does not indicate something wrong with the unit.

  I saw this message several times: "battery wireless failed to launch.

  Someone at - it a solution for this (restart to the exclusion, that is)?

  2 standby does not work. When after a wait of some processes

  You seem to lock up most of the resources of the system. One of the hearts

  works at 100% load and the other is inactive. Research in the Task Manager

  I see several processes competing for the top position in the CPU usage.

  I get not a clear idea of this process is the problem, but I think it's safety

  Associates. There seems to be a driver problem, rather than the result of my software

  (Firewall, Antivirus,...). I guess that since the same software works well with

  watch over my other laptop (also Win XP SP3). Apart from monopolizing the

  System resourses the problem does not prevent me to get online and

  in collaboration with most of the applications.

  Hibernation does not work. During the recovery, the PC crashes completely

  (before that the Office is reached) and it will not meet any entry, a material

  reset is necessary.

  Any thoughts on the above problems?

  Everyone has the same problems?

  Suggestions for updating/making drivers back?

  Happy for Fredrik advice

  Sorry for bringing This new thread since no one else seems interested.
  I however managed to solve these problems on my own, so I want

  share workarounds if by chance anyone would win.

  First one quote another post by myself:

  «Sometimes when I boot the PC will connect to the network and everything works fine.»
  At other times, after start-up, the "wireless stack initialization failed, error code: 118 ' problem

  and the only way to fix it seems to be a restart of the PC. Anything else I do to display the network.
  If I look at the tab network layout in the Task Manager indicates that none of the adapters are available (cable eth.
  Access also fails).  This is obviosly a problem with the Access Connections software
  Since the wireless network works well when I let windows manage... »

  So there is no real solution to the problem WiFi only workaround is to let Windows manage the

  WLAN security. I used the laptop for two weeks now and wireless works perfectly under XP

  control.  What have I done? I edited my profile of connection in the dial-up connections:

  Open connections > location profile tab > select profile > wireless settings tab > option 4.

  Wireless security type = use Windows to configure wireless network

  I must say that the logins is useless to me now. It does not allow me to view and select

  wireless networks, but which can be done both through the windows graphical user interface. However, I can use

  graphical versions of Ping, Trace Route and IP Config (in the dial-up connections) if I want to.

  The solution to the second problem was easy as soon as I find the culprit.

  This problem is also related to WiFi, apperently drivers Intel WLAN/material

  can not handle standby correctly

  http://support.Microsoft.com/kb/951447

  What have I done? I stopped windows turning off the wireless network adapter to save power:

  Open Device Manager (for example the Panel > system > Hardware tab) > right click of the WLAN card >

  Select Properties > power management tab > clear the check box to be able to save.

  "Allow the computer to turn off this device to save power".

  Sleep now works as expected. I have not tried Hibernation and do not hear.

  Could be useful to someone.

  / Fredrik

• Failing 10Z NB200 standby or Hibernate mode

  Hi, I hope someone can help. For the last two or three days my NB200 were hung from windows 'preparation to sleep' or "preparation for the Hibernate" screen and the only thing to do is prolonged pressure on the power button. What is happening with both the FN keys and through the start menu. Sometimes it is suspended during an internet session when the Windows menus are accessible by any selection or closure is possible. I do not download other programs that updates for Firefox, Windows and antivirus. I use Windows XP. Any advice?

  Hi jillp,
  Search for the question...
  or do a cover...
  or try a previous restorepoint

  I don't know that it is a software problem...
  I would like to recover the default unit and watch if the problem disappeared...

  sure your data first!

• Several issues of the G20 (pixelerrors, IR, standby and Hibernate, TV)

  Hi people!

  I bought a g-20 a few weeks ago and from the beginning I had several problems with my laptop. I hope one of you can help me! Moreover, it is the G20 with TV Tuner and things supplied with it...

  (1) I have a pixel on the screen error. As I use the black background its not very nice. does anyone of you have also pixelerrors? or are all your screens ok?

  (2) I would use internal infrared to connect to mobile phone. Unfortunately, there is no driver or whatever installed, so IR does not work?

  (3) I had the problem that when I try to go sleep or hibernation, the system hangs up and stops. I reinstalled the laptop complete with the recovery and understood, that, when the bluetooth driver is installed, this error occurs. Anyone know how to solve the problem that the two works?

  (4) I'm from Switzerland and use cable television. I connected with the laptop and installed MCE channels via the postal code and so on... Well, it scans through all, but actually I have maybe 10 channels work proberly. on about 50 to television. on television, he works all fine, but the same line does not all channels on laptop. is it possible to use other tools to watch television? or scan the frequencies manually, then could I myself check and tune the channels myself? for example, I also use teleclub (identical to the first in Germany) and it should be a signal that is decoded on the wire. but the laptop can't find the channel or its does not work.

  (5) when I am in sleep or Hibernate mode (after reinstalling I just does not have bluetooth (see above) then it works) the laptop itself always starts at the 0820 in the morning. so no one does anything, it starts from only. any idea?

  I hope I have now all the errors found and explained. After all, I am not very satisfied of all. The G20 is a laptop of luxury of the upper priceclass and early hurts only. As for me, most of the included items are for me to work (tuner TV, IR...) I bought this laptop just because of that sort of thing. and it was written anywhere, the tuner can only work with the qosmio player or the IR does not work.

  So I hope that you are my solutions where I can get help and forget about my troubles ;-)

  See you soon

  Atanvarno

  [Edited by: admin]

  Hello

  As Chris said, aren't serious misconduct. You should check the manual which is preinstalled on your laptop exactly. You will find lots of information on IR, Bluetooth, Qosmio Player, etc. I m you will find a description on this issues.

  Good bye

• Grayed out button standby and Hibernate in windows XP missing button

  Hi, my computer is a Dell (Inspiron E1505) using Windows XP laptop. I had a problem of virus a few weeks ago and had to format and reinstall everything. I'm really bad with computers and apparently I did something wrong because now my sleep button is gray and my Hibernate button is missing. The two were there and works perfectly before the virus.
  I went to check the power options, and there is no Hibernate tab more. I checked the following instructions from Microsoft are supported and I labor thing ACPI and in one of the assignment, he says I'm supposed to check a BIOS thing and I have no idea how to do that. I really really need help with this because my laptop is old and it takes forever to start.

  Aicam,

  For standby and Hibernation work, you must have at least as much disk space on your drive hard as you have RAM in your system.  For example, if you have 4 GB of RAM, you need more than 4 GB of disk space free for standby/sleep extended to work.  How much free space and RAM do you have?

  HTH,
  JW

• Windows 7 hibernate problem

  Hi all

  My HP Pavilion dv6-2113tx with Windows 7 SP1 installed does not seem to be able to successfully Hibernate more. When I click on Hibernate mode, the screen shuts off and then suddenly flashes and the screen stays off, while the PC stays on. If I then move my mouse powers of the screen, indicating that the laptop is not actually spent in sleep OR hibernate.

  Would it be possible due to the partition of Windows 7 is not not active? If this is the case, is there anything else I can use to make my PC into Hibernate?

  Thank you

  Dean.S

  Hi all

  As I have suggested, the problem was caused by Windows 7 is not not a partition active. Alas, I set the partition active and then tried hibernation Win7, and oddly enough, it worked. Why Microsoft made Windows like that? -Answer: No reason.

  Thanks for your help,

  Dean.

• Windows crashes after the standby or Hibernate mode

  I have win 7 64 bit updated for vista. There have had no problems until now, but in these last days, whenver I sleep or put nohting happends Hibernate my PC, and then I have to start windows in safe mode or in normal mode.

  The pc instead of sleep or Hibernate crasehs.

  Thank you

  KS

  Hello

  you have the STOP code 9F?

  If so, try to download the following patch:

  KB975599 - Stop error message when you upgrade a computer that is running Windows 7 or Windows Server 2008 R2 standby , Hibernate or when you restart the computer: "0x9F".

  Go to following site http://support.microsoft.com/kb/975599 and click on view and request hotfix downloads , select the platform (x 86 or x 64) and type your e-mail twice and type in the captcha ad click request hotfix.

  After 1 minute, you have an email with the link to download an exe file. Use the password is contained in the email to retrieve the update.

  Install the update and restart, now, the problem should be solved.

  If you still crash, download the Minidumps, as already suggested No.Compromise.

  concerning
  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• XPS cannot switch to standby or Hibernate mode

  Hello

  I saw a similar post here, but I couldn't solve the problem...

  My Dell Studio XPS 13 has a strange problem:

  When I close the screen (it closes down), the computer is not enter standby or hibernation mode, and rather that the screen turns black. 'normal' in the keyboard lights stays on and lights side indicate that the computer is running always full power. You can say that on hearing the noise of ordinary fan.

  Trying to put it to sleep by start = > sleep/hibernate - the same thing happens - computer still works but the screen goes black.

  Basically, therefore it is blocked until I forced closure (by the close button).

  Should I update the BIOS? would it be useful?

  I use windows 7.

  Thank you...

  Hi oren_m,

  Please check the power options are set to sleep/hibernate for the option "when I close the lid. (See attached snapshot)
  If the problem persists, please reinstall the graphics driver. Enter the number of Service and the appropriate operating system and download the latest video drivers from the link below.

  http://Dell.to/T2hKYc

  

• When I close the lid on my MBP, it goes to "Standby" to "Hibernate" why?

  My MacBook Pro for six years had been working perfectly until about a month earlier, when he stopped to stay in Mode standby when I closed the lid.

  With the lid closed, initially, he goes to sleep, but after about 30 seconds, it goes into hibernation mode and to turn on again, I have to press the power button. I then get a grey screen and no use of the trackpad. Shortly after, the gray screen disappears and the machine works perfectly.

  The battery life is very good (68%), I have reset the SMC and I have not loaded the new software. The only thing I can think is that this started to occur at the time of the last update of Safari.

  Does anyone else have this problem?  Comments or suggestions are appreciated.  Thank you.

  Hello, Spring Lake Bob!

  Thank you for using communities Support from Apple. After reviewing your post, I understand that your MacBook Pro sleeps as expected when you close the lid. Instead, it goes into a hibernation mode that requires you to press the power button to interact with him again. I certainly understand wanting to make sure that the computer sleeps when it should wake up how it should. I'd be happy to help you!

  Get help with your situation, I would say using the article below the link to help isolate and solve the problem of sleep.

  If your Mac does not sleep or wake up when expected

  See you soon!

• Possible drive with backup problem

  Recently, I needed remove the files from the old drive to backup after discovering their involuntary inclusion on my regular backup disk. These files somehow became included for backup to disk when I have included another external hard drive where they lie in the intent of formatting that lead to use as backup for the second part of my system dual-boot. This problem is surface shortly after the withdrawal of older backups with error message:

  "Time Machine could not finish the backup"Backup 04 BateStar."

  Cannot copy the files on the backup disk because it seems to be read-only.

  You need to maybe repair or reformat the drive using the Utility Dist. If the disc is not repairable, you usa another disk for backups. Open Time Machine preferences to select a different backup disk. »

  I completed both an audit and a repair that shows the drive to be good, no errors.

  Am suspect at this stage that it is was eventually added to the directory, or to a location on the disk are addressed by the directory of corrupted data.

  Is it possible to fix this without reformatting the drive 3 t?

  Furthermore, need to reformat, how would I be able to retrieve up-to-date backups without including whatever the location of incorrect data are included?

  Sparkgapper

  Try this...

  http://Macs.about.com/od/troubleshooting/Qt/fixing-time-machine-errors-the-Backu p-Volume-is-reading - Only.htm

• Portege M750 restarts after the standby or Hibernate mode

  Since I remmember I use my laptop with activate the sleep and hibernation features.
  A couple of days, it started not to restart after the sleep or Hibernate mode.

  You have to take the battery or current alternative, then it starts but without taking the sleep/hibernate.

  Another thing is that when you press the switch on the alternating current led, which is normally green button, it flashes yellow with some sort of a code long and short flashes.

  This happens with different OS cause I tried to reinstall and the problem persists.

  > Another thing is that when you press the switch on the alternating current led, which is normally green button, it flashes yellow with some kind of code long and short flash

  I know that if there is a failure of memory the * power indicator * flashes repeatedly on and off the power (0.5 sec) if there is an error in the slot A the indicator would blink twice in orange, and then green.
  If there is an error in the B slot, the LED will Flash orange and green twice.
  If the error is in the two slots, the LED flashes twice green and orange.

  By the way: it's your BIOS up-to-date?