print large format on epson printer

I am trying to print a document from Illustrator. The document size is 13 "x 19".

When I load Super A3 paper (13 x 19) in my Epson printer the printer starts and begins to print but stops at about 4 inches down the paper and then ejects the entire sheet (with the rest of the image is not being printed). Epson monitor indicates that the document only addresses once again the sheet partially printed is ejected. The quality of the partially printed sheet is fine.

I put to the top of the print dialog box of illustrator to the size of the sheet that I put in. Ive tried 3 - 4 times with the same result.

I'm on a MAC OSX 10.5.8

Seems to have no problem with other sizes of standard sheet printing.

Any thoughts?

There are a few things you can try; 1.) see if you have enough memory to process the page (it might be out of memory system); (set of 2). an invisible operation line to the page / document and lock (no terms, no fill @ 13 x 19); 3.) use the Page tool (if you haven't done so already) and set it to the document, edge to edge.  In addition, check ink you supplies, there may be an empty cartridge that prevents you to print the entire file.  I hope this helps.

Tags: Illustrator

Similar Questions

  • Cannot print from Photoshop CS4 in an iMac OS 10.6.3 to large format printer Epson 11880

    Hello! I was wondering if you could help me with this matter.

    Old computer: Mac G4 (acquired in 2002)

    Old operating system: OS 10.4.11 (Tiger)

    Processor: Dual 1.25 GHz

    Memory: RAM 2

    Software: Photoshop 7

    Material: Printer large format: Epson 11880 (64 '' large monster). Prints large posters, banners, etc.

    As you can see, it's time for an upgrade...

    New computer: iMac

    New operating system: OS 10.6.3 (Snow Leopard)

    Processor name: Intel Core i7

    Processor speed: 2.8 GHz

    Number of processors: 1

    Total number of Cores: 4

    Memory: 16 GB

    Software: Photoshop CS4

    Material: Printer large format: Epson 11880

    Situation: We hung everything and managed to print on the printer 11880 2 times and printed two draws large format. On the third attempt, we encountered a serious problem...

    Problem: After opening a file in Photoshop and it sends large format printing to the Epson printer, the file goes to the print queue of the printer and stays there for 6 seconds, and then it disappears. It does not print. :-(

    What we have done so far:

    • We have ensured that we have downloaded the latest printer driver for your printer from the Web of Epson site.

    • The printer driver is correct. The computer communicate with the printer and we are able to run all of the commands Panel printer utilities. (check the ink levels, cleaning heads, etc.).
    • And Yes, the printer is correct, because we use it with the old G4 machine for about a year.

    • This problem got so frustrating, that we thought that something that we transferred during the installation of the computer could be the culprit. If at some point we have wiped the drive on the new computer and reinstalled the operating system and do not have all the files in any old computers in this machine. The computer has nothing else in it. Exception: Operating systems and Mac applications that come when the Mac out of the box. The only other program installed in Photoshop CS4 and the printer driver.

    • We wondered if it was just a printing problem, period. So, we added a small printer to the computer - and the old Epson 2200 we have. We have sent a file to the printer and there is no problem.

    • Perhaps, the file size would have been a problem? It does not matter. We can send a large file of 60 MB for the printer or a small photo measures only 8 x 10, and they linger in the queue for 6 seconds and disappear never to be printed.

    • Temporary relief came when we got rid of the preferences of Adobe Photoshop file. After got rid of the file and Photoshop which allows to reconstruct, we managed to print two large files to the printer. Then he failed once again. Trying to get rid of the preferences again, and the trick doesn't work anymore. :-(

    • Another temporary relief came when we created another user to the computer. On the new user account he printed new once or twice only to fail later.

    • And Yes, the printer will print from other Mac programs. If, for example, we open a file to preview and send it to the printer and the file will be printed. And Yes, we were able to print very large files with this method.

    In the last two days, we spent 3 hours on the phone with the guys at Epson. They checked the driver, and because the computer seems to be to communicate with the printer and print from other Mac applications, they suspected that the problem is with Adobe.

    We called Adobe once and spent 30 minutes with an Indian classmate who concluded that the problem is with how the computer manages the queue. According to him, Photoshop sends the file to the computer, and the computer seems to get rid of it. So he passed the ball and we were told that the problem was with Apple.

    We called Apple and met for 30 minutes with a friendly technician who transferred us to a higher level of techno-geek. I spent 1 hour on the phone with Apple, and we tried everything. We went through to the knowledge base of Adobe and tried all the proposed solutions (see Adobe KB406452). It is with him that we found a temporary solution of deleting the preferences file, but the solution was short-lived. Finally, he thought that the problem was with Adobe because the printer is capable of printing from all applications EXCEPT Adobe Photoshop.

    We called Adobe for the second time... and after waiting on hold for an hour together, we got an Indian technician, who bless her heart, had a very thick accent and had no expertise, in my opinion. It was good to collect data and it even made me share my computer screen so that he could solve the problem. After being constantly put on hold by him (because he had to consult with someone else), he passed the ball and said it was the problem of Apple. I just told her that it was also unlikely, because all EXCEPT Photoshop print programs. After trying what I consider a "Hail Mary" to REMOVE all printers in my library folder and replacing them does not, he recorded a case number to another technician from Adobe to call us in the coming days.

    Because the technician that the above completely blew the library, I just erased and reinstalled the operating system. This time, I did not allow the operating system to date - on 10.6.2 (which comes in the box), 10.6.3. We tried to print using the 10.6.2 and had the same problem. :-(

    Conclusion: I think it's a problem of Adobe CS4 does not agree with new Apple operating system. The Epson printer is fine, because it's a product that has been on the market for almost 3 years. What is disappointing, is that none of the companies wants the man to the top and say that this is a problem and that they are willing to work on it. Instead they return the ball to the new company.

    I can't believe I'm the only person who knows this. If someone has had this problem and have you found a solution or workaround for it?

    Our engineer:

    Looking at the rest of the thread, the user says "However, avoid us all of the computer color management or the printer when printing it right now."

    If they use "No. Color Management" mode, I'm not surprised to see failures on the Epson, and that's what gets the note "Is not a valid color space" in the journal.

    Use either PS color management manages or printer handles and things should be fine. Or use CS5 and things should be good.


  • large-format HP officejet7500A: Print A3

    Hi, I just bought a printer large format officejet 7500 has, I am trying to print A3 and nowhere on the page set up do I have this option. Please someone help because I bought the printer specifically so that I could print A3 I conceive papercuts and need that option. Thanks for listening waffle me on.


    Thank you for using the HP forum.

    You can download and install the software FULL of printing to HP for Windows 8 (not 8.1) features:

    Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

    The A3 option should be there.

    Hope that helps.

  • Large Format HP Officejet 7500 a: old options for printer recycling

    My all-in-one large format Officejet 7500 a has a broken belt print head.  There are also problems scanning that I decided to replace rather than repair it.  I live in a small town where there is no recycling options.  I'm looking for a way to get rid of the all-in-one former official.  Make a donation to repair/rehabilitation, a free recycling center, etc..

    Had to do a little research but found this.

    This is not a program I know nothing other than what I read on the page.  Looks like it is for the United States.

  • my print head large format 7500 needs?

    My 7500 has large format officejet displays the message "ink cartridge seems to be missing or damaged.  I cleaned second level clean print heads, put in a new hp black cartridge, clean the plates of copper brass on the cartridge and the printer.  do I have to replace the print head?

    I understand that you are looking to replace the print head after doing the different troubleshooting steps, but I would like to clean the print head manual too. Here a link to the user manual. It will show how to clean the print head and what materials to use on pages 120-125. While you clean the contacts on the print head after you delete it, check to see what warranty end date to the printhead is. If this date has not passed, I would call into HP total care for quality output troubleshooting.

    I would also do a hard reset of the machine to try to clear the error message and return the printer to a known working state. No user settings are lost with a hard reset.

    1. with the printer plugged directly into a wall outlet and turned on, unplug the power cord from the back of the printer.
    2 then unplug the power cord from the wall outlet.
    3. wait at least 30-60 seconds
    4. plug the power cord into the wall outlet first. If a module with the power cord, make sure that the light of the module and then reconnect power cord on the back of the printer
    5. the printer should power back on by itself, but if not use the power button on front panel to turn on machine.

  • My printer is a HP Officejet 7500 a large format e-all-in-one printer-E910a.

    It shows a general error on the screen # 0x610000f6. And that's all that. How can I resolve this error and make some impression

    Hi @Aroo

    Usually the 0 x 6 * errors point to a carriage jam. Please use the following document to solve the problem; ' A 'carriage Jam' or ' 0X610000F6 "message for HP Officejet 7500 (E910a and E910c) a large Format e-all-in-one printers.

    If the problem persists, I suggest that we call. If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide. Even if the printer is out of warranty, I recommend calling that we might be able to offer a discount on a newer model.

    I hope this helps.

  • HP large-Format 7610 - do not give any option in word or excel to print A3 or Taboid

    I have a HP Officejet 7610 large format that will not give the ability to print on A3 or Taboid paper (11 x 17) in one of my programs (Adobe, Word, Excel, Powerpoint, etc.).  I can print on 8.5 x 11, 8.5x14 and any combination of cards until a 8.5x14, but nothing more.  I put 11 x 17 paper in the tray and it will print on it, but the print size (area) is the same as it would have been for the 8.5x11 or the 8.5x14.

    BTW - windows OS 8.1

    Any help would be greatly appreciated.

    Thank you

    Hi again.

    If the steps that I have on double has not resolved the problem, the next course of action would be to contact HP Total Care at 1-800-474-6836 or if you are outside North America, please click on the following link for Contact HP worldwide.

    Thank you for your time.

  • My new HP Officejet 7610 large Format cannot print A3

    Hi all

    I just buy and install a large Format HP Officejet from the 7610 and I tried several times to print a sketch of A3 from photoshop. In the preview, all right, I checked the size of A3 paper and all, but printing is a cropped image of the original in the middle of an A3 paper A4.

    I use Photoshop CS6 on a Mac with os x 10.7.5 operating system and I'm really confused.

    That I am I wrong to do so since the preview is ok?

    What else could I do to print in A3 size?

    Hi, in response to my post, I installed the software directly from the disc that came with the printer without the help of the online resource.  Previously, I had simply related that he and it worked for A4.   He now works as well as many other features that had not been installed.

  • Large format HP Officejet 7500 a: print head for my large Format HP Officejet 7500 a


    I have a printer of e-all-in-one large Format HP Officejet 7500 a - product E910a No.: C9309A serial no: [personal information deleted]

    I need to replace the print head.

    I found this on HP page they said it use the CN643A

    On a support HP cat, what they said use CN642A.

    On another page of HP, they said use CH638A.

    The CN642A is now 5 HP564 ink cartridges, but still the HP web page said that it will work in my HP Officejet 7500 a large format using the HP920 cartridge.

    I found other heads of printing on the web article CD868-30001 model number and on the web page of HP were unable to match the part number for a list of available models.

    Now my big question including the number of pieces to the correct print to my printer head?


    I offer my apologies. It should have been if your printer uses 4 ink cartridges, type CN643A

    Please click HERE to access the document to see what print head fits into your printer.

    Check under Solution 4: replace the print head.

    Step 2: Order the print head

    He states:

    If your printer uses 4 ink cartridges, type CN643A

    If your printer uses 5 ink cartridges, type CN642A

    Please ignore my previous post where I suggested CN642A.

  • printer large format

    We recently purchased a printer large format, the Z6600 and it came with a Cyan ink cartridge. I'm having a hard time finding a replacement of the cyan cartridge. I don't see Light Cyan for the purchase of supplies.

    Hello Advertisingblue,

    I referenced the user for the printer HP Designjet Z6600 Production guide and found the following list of cartridges:

    HP 773 has 775 ml black matte of Designjet cartridge C1Q21A ink

    HP 773 has 775 ml of ink Designjet Magenta cartridge C1Q23A

    HP 773 has 775 ml of ink Designjet yellow cartridge C1Q24A

    HP 773 has 775 ml of ink Designjet Cyan cartridge C1Q26A

    HP 773 has 775 ml Photo C1Q27A Designjet black ink cartridge

    HP 773 has 775 ml of ink Designjet gray cartridge C1Q28A

    For the cartridge Cyan (C1Q26A), I found the following reference to the command:! tab features =

    I hope this helps.

    Kind regards

  • problems printing large format HP 7000

    I apologize if I'm on the wrong card, but I couldn't find a specific item for me. I have a printer large format 7000 I bought because I was told that it was printed on canvas. I need it to make copies of the art of my wife. There is no setting for the Web (seller thanks), but I have success with a set of best quality paper and auto. about 50% of the time as I get evenly spaced black lines. I use canvas treated, bought online from HP. I use a HP desktop computer. Windows 7

    If anyone has had any experience with this problem please let me know. The lost painting is expensive, but the cost of ink is killing me.

    It prints very well on the photo paper advanced, it can be all that it is rated for.

    Thank you Ed

    You can see this way to use another driver here:

    This will limit your functionality, but expand some of the options for the selection of internal paper. See if that gives you options that you can use to modify the responsiveness of your printer.


  • Large format HP Officejet Pro K8600 printer won't print larger sizes, more

    I created a document editor of 13 "x 19". 13 x 19 ". I am trying to print and paper size continues to go to 4 x 6. I went into the settings of the printer and entered the two fron the tab general and on the Advanced tab in the 'printing preferences'. I set the size of paper 13 x 19, which is a standard size of large format. No matter what I do, I will go back to the Publisher and the printer is trying to make the paper 4 x 6.

    I thought that I would like to beat the system by recording format TIFF and printing from photoshop or lame windows Printing Wizard photo, IT FACT WITHOUT DIFFERENCE, THE PAPER SIZE WILL NOT LET ME print 13 x 19 PAGES! I'm at my wits end. I downloaded the latest drivers, but don't really expect, this change anything since I "ve could print this page size in the past, using this driver. Does anyone else have this problem and it was resolved? Thanks in advance for your help.

    BTW, I'm printing to a system with Windows 7 Ultimate 64 bit. I don't know if it's a question of Windows 7, a 64-bit Office, but it is certainly a driver HP problem. I tried to print using MS Publisher 2010, Windows photo gallery and Adobe Acrobat X and Photoshop 64 bit CS5.5 photography.

    I found the answer in another post that did not come with my initial search. In case anyone else needs to know, just go to your printer properties, Advanced tab, click the print processor, then select the WinPrint processor.

    Click OK and apply/OK and you should be OK to print on paper large format again. I had to restart my spooler service, but only because I had a bunch of items in my queue that wouldn't not delete

  • Large Format HP Officejet 7500 a - black ink print colors. Colors don't print correctly.

    HP Officejet 7500 a large Format

    Mac OS x Lion
    MacBook Pro 13 "

    Printing files PDF and various programs.

    • Printer prints random colors instead of Grayscale / black.
    • Using a lot of color ink and not a lot of black.
    • Have run head clean process repeatedly, problem fixes for a few prints then the problem comes back to halfway through a new course.
    • Try to use grayscale / black for the most part.



    This happened to me... Printed from a PDF document was gray and pink text and vector images. So, I need to print in color, not gray. less advanced in the print dialog box, I selected preserve primary CMYK and gray gray as K - only treat and preserve black. All three must be selected.

    I hope this helps!

  • Printer large Format HP 7500 has: OfficeJet 7500 has quit the connection during the scan in VueScan & Mac OSX 10.10.1

    The scanner interrupts the connection of WIFI halfway the scan. I can scan sometimes two or three pages, and then the next page will scan only partial and the connection is abandoned - typically freezes application (VueScan), while the scanner window indicates that the analysis is ongoing. If I wait until the scanner end I get only part of the page, with the background that half left in white.  That is what it is? Is the problem with VueScan, Mac OSX 10.10.1, OfficeJet 7500 or my WIFI network?

    Thank you!

    My system: Mac OSX 10.10.1

    VueScan 9 x 32 (9.4.59)

    iMac 2.8 GHz Intel Core Duo (24 "beginning 2008)

    6 GB Memmory 800 MHz, DDR2 SDRAM

    HP 7500 has large Format Printer/Scanner (model E910a)

    WIFI modem: Cisco 3825 DPC

    (Shaw CableVision/WIFI modem)


    What happens when you scan from the HP or Capture of Image scanning software, you see similar problems?

    In the affirmative, please let me know because it wil require to solve any problem of connectivity to the printer.

    If everything works with software such as HP can happen due to any problem with VueScan, such I would say contacting VueScan at torubleshoot because they are more familiar with their product.

    Please let me know the results,


  • OfficeJet HP7110: 7110 HP large format printer prints to the left with Windows 10

    I have recently upgraded to Windows 10 and a book of Surface and now when I print on my printer large format of HP7110 send all is off center to the left. I am not able to use my settings customized for a 12 x 18 prints.

    The scan doctor and toubleshooting "of problems after installing WIndows 10" article were completely worthless to determine the issue. I ended up installing one of the pilots to plot to override the default settings for the printer. Pretty amazing that a printer large format will allow only certain papersizes to use when using a PC (using a Mac, you can set all the desired dimensions). HP should probably find a friendly driver for PC that does the same thing. In the meantime people must install one of the drivers of your parcel. I used the T520 pilot.

Maybe you are looking for