printer Officejet 4620 in two States

Similar Questions

• Blue screen on Asus laptop when it is connected to the printer OfficeJet 4620 computer

  I have a laptop Asus U47A, Windows 7, 64 bit. When I connect my laptop to the printer Officejet 4620 via USB and it has print my computer gets the blue screen and turns off. This doesn't happen every time, however. I tried to uninstall and reinstall the printer software, and I tried to plug the usb cable to the port instead of port 3.0 2.0. None of this worked well. Any suggestions?

  This problem normally only when the USB 3.0 port is used and the Intel chipset that causes the problem has not been updated. First of all update and see if it helps. Here's my post on how to know who is who, but also update this driver:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-setup-e-g-Windows-8/handling-problems-with-USB-3-0/TD-p/2001211

  In addition, you need to maybe just remove the software and reinstall from the software available on the site of HP full setting:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=5191646

  Let me know if that helps you!
  

• Problems installing printer Officejet 4620: error "access denied."

  Hello! I'm trying to connect my HP Officejet 4620 via the USB port on my computer Windows Vista x 64. The computer is already installed the HP Officejet 3320. When I installed the driver (version of basic pilot without additional software), installation is 'successful', but after finishing installation a message shows by reading that the computer could not connect to the printer. When I try to print a test page, a message appears saying: 'access denied '. In addition, the other printer which has worked before is no longer works and comes up with the same error "Access is denied.". Have clues on how to solve this problem? Thank you!

  PS:

  I tried to disable firewall and antivirus, I tried to reinstall several times, including in selective startup mode

  Hello electronicreprr,

  If two printers are connected to the computer via USB?

  This article deals with the error you receive, however expressly mentions networked printers.

  "Windows cannot connect to the printer. Access is denied' s ' Please help.

• Printer Officejet 4620: Officejet 4620 wireless connection problem

  I have just moved house and have a new wifi connection/router.

  My HP Officejet 4620 shows network status in offline mode on the network configuration report. On the connectivity report, he discovered the new wireless connection but does not seem to have really connected to it.

  I have restored the wifi settings to their default settings of the printer, but I don't know what to do in order to get the printer to connect to the new network.

  Please can someone help?

  I appreciate any help you can offer, thank you.

  Replacement/change your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• Print a Test Page - e-all-in-one printer, HP Officejet 4620 range

  Here is a video that will guide you through printing a test page for the printer Officejet 4620.

  If you like this video, and you would like to see more, be sure to subscribe to the HP's YouTube channel.

  I hope this helps.

• Connect my Chromebook from Google to my HP Officejet 4620

  I just bought a HP Officejet 4620 e-all-in-one printer and I am trying to connect it to my Google Chromebook, who has the Cloud Services in it.

  I also have problems in a position to get the claim Code to printer for installation instructions.

  Also, how can I get my HP ePrint e-mail address?

  The name of the printer model is CZ152A.

  We hope to get answers. Thank you.

  Hi Oyale,

  Welcome to the Forums of HP's Support. I understand that you have a Chromebook and printer Officejet 4620 and want to get the program installation and operation.

  Let's start by mounting the printer on your wireless home network. I've included a link to your user's guide, on page 200 in the section titled "Set up the printer using the web server integrated (EWS)", you will find detailed instructions.

  Now that the printer on your wireless network, we need to enable web services for each printer. There is a section in your user guide starting on page 70 that examines the HP ePrint. In the section 'Set up HP ePrint using the web server integrated' please follow the instructions to get your web services fact sheet.

  Once web services are enabled, you will want to create custom email ePrint for your printer. I have included a document with detailed instructions.

  Now that we have customized email ePrint, we need to set up Google Cloud Print. I have included a document with instructions to configure Google Cloud Print. We should now print. For any additional consultation, I have included the link to the web page of Google Cloud Print.

  HP Envy 4500 e-All-in-One Series user guide

  http://h10032.www1.HP.com/CTG/manual/c03251656.PDF

  Setting upward a Custom Email address for ePrint

  http://support.HP.com/us-en/document/c02940150

  With the help of Google Cloud Print with your HP printer

  http://support.HP.com/us-en/document/c02817255

  Google Cloud Print

  http://www.Google.com/Cloudprint/learn/

• OfficeJet 4620 - will be not printed black - HELP!

  I have an Officejet 4620 and the printer doesn't print black ink.  Other colors print fine.  After spending $ 65, I've replaced the ink cartridges, and it would not print!

  I found the link to ""printer prints a blank Page or print no black or color ink for HP Officejet 4610, 4620, Deskjet Ink Advantage 4610 and 4620 e - all-in - One Printer Series " and followed all the instructions, TWICE, if not three times! "

  I also cleaned the printhead several times, two rounds each, and again, it will not be printed.  What to do is print the calibration reports that continue to eat my ink!   Printing reports colored pieces, but nothing in BLACK!

  This seems to be a very common problem with these printers because I have read several forums that describes the same thing, and HP does not seem a good solution or offer of difficulty or the problem.  I noticed most positions with this question end up making a private offline message.

  Before I wonder, the printer is no longer under warranty and I live in the United States.  PLEASE HELP ME!

  Hi @VetteGuy,

  Welcome to the HP Forums!

  As you have provided all the relevant information, I need to give a hand, I'll go and send you a private message to discuss the next step from here. If you are unsure how to check your messages on the forum this post, has instructions

• HP Officejet 4620: Printer is in"error" and will not print, even though the computer says that it is "connected".

  My printer recently started telling me it was in a State of 'error' and could not print my documents.  Sometimes I could turn off the printer market and all that was trying to print would then print, if documents or Quicken checks.  Now I can't print from the computer at all, or it will print checks from Quicken even if I turn the printer power off and power on.  The HP Web site indicates that it is connected.  It is the second computer from HP Officejet 4620 of the original that I bought.  The first has a problem that has been covered by the warranty, and this one doesn't seem to be much better.

  Hi @Janilynn,

  Welcome to the HP Forums!

  I read your post and wanted to help.

  I understand that the printer does not print when the computer shows that it is connected.  Please run the print and scan the doctor.

  I would like to know if it solved the problem or gives you an error message.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• HP Officejet 4620: HP Officejet 4620 only ink red print documents computer

  Hello

  I'm connected wireless to my printer HP Officejet 4620. I use the XP operating system (I know very dated) I am trying to print Word documents and they are just an impression in red ink. When I try to run "Clean printhead" function black ink prints fine through the printer. Can someone help me or explain the reasons for which the documents are only printing red ink through my computer?

  Thank you for your time,

  Steph

  Hey @StephyB,

  Welcome to the Forums of HP Support!

  I understand that e-all-in-one Officejet 4620 prints in red when you print from Word on your Windows XP computer. I can help you with that.

  Probably what is happening is there is a font setting that has been changed in Word. If you are unable to find such a context, then the following can be done:

  1. Close any programs you have open.
  2. If the printer is connected via a USB cable, remove it.
  3. Click on start, control panel and printers.
  4. Right-click on any icon of your printer listed.
  5. Click on remove the instrument.
  6. Repeat for all other icons of your printer listed.
  7. Uninstall the drivers and the software associated with the printer.
  8. Download the latest drivers by clicking on this link.

  Please let me know if this allows you to print in black. If so, please click on accept solution. If you appreciate my help, please post it by clicking the thumbs up icon. The two icons are below this post.

• Error in printer HP - Officejet 4620 Script Wizard

  1. number and product name
  HP OfficeJet 4620

  2 operating system installed (if applicable)
  Windows 7 SP1

  3. error message (if any)
  When opening printer HP occur two script Wizard errors

  

  

  4. all changes made to your system until the problem occurred

  
  Installed the HP software from the website (latest version)

  
  

  Hello world

  Root cause:

  A default program to open this file has been correctly defined.

  Download and run the file below. Let me know what you find?

  Update of file association

  Thread resolved - why the wizard of the printer is not working?

• HP Officejet 4620: portable printer communicates only with the computer

  Last home had this printer set up under the name of wireless. lost connection cables so had to buy a new one. Printer goes and copies, scans, etc. Have unplugged, said prayers, and still it wont connect. Just bought new cartridges so you don't want to throw it out the window right away!

  Document is the printer online. Mark Exclamination (troubleshooting) appears on the printer control panel

  Hi @chaloupay,

  I'd love to help you with your Officejet 4620! Thank you for taking the time to post in the Forums of HP.

  I understand that you were able to print until recently, and now you see an exclamation point on the screen of the printer. Performing printing and Scan doctor could help. HP printing and doctor Scan is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to find that the key and the box are both in a green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

• If you see a red X (), follow the onscreen instructions to fix the problem.

Please let me know if that solves the problem, or if you need assistance. In fact, if this helps you to find a solution, please click on the button "Accept as Solution" down below in this message.

Thanks, I look forward to hearing back on your part.

• My Officejet 4620 do not print black ink

  I replaced the black cartridge on my Officejet 4620 with a new high-capacity HP cartridge and it won't print black ink on the test page, any application or function of Copier.  I have reset the printer nothing helps.  The ink level indicates that it recognizes the new cartridge and says it's full.  Black ink out of the cartridge when I put my finger against the exit hole.  I cleaned and aligned the print heads, but still no go.

  just in case someone else has this problem, heres whats really past and heres how to fix this annoying problem. its relatively easy to do and more efficient than wasting money on a new printer or have that he repaired as most people eventually do.

  going on what? the ink has clogged print heads and solidifies closed. the function of "clean print heads" the printer comes with doesn't have the ability to solve this problem. This feature is to clean the heads Sales, not clogged heads. Why hp decided to make this model without a simple to remove the cradle is beyond me, but fortunately the cradle out and can be cleaned with hot water.

  theres a few items, you will need to get there easily, or you could just burst the branch loppers, like I did and vent your frustrations.

  you will need: a pair of slender beak pliers, a screwdriver torx T9 (selling auto parts stores them for a few dollars), paper towels and a space for work (its easier to do this in a corner of a room, on a small table or floor).  Keep in mind that you are dealing with ink, then change your clothes right just in case and also catch a paper plate or a few sheets of paper to print to set ink cartridges while you work.

  (1) ok. lets start. !!! FIRST UNPLUG THE PRINTER RIGHT NOW, IF YOU DO NOT ACCIDENTALLY DIE BY ELECTROCUTION!  I forgot and when I started unscrewing the first 6 screws, kept chime jump and im like * beep *? I was impressed by the security measures hp took as model engineering.

  (2) the printer is now disconnected and then go to your corner your work surface and place the printer, so there is a wall or a barrier on the left, and also, a wall or a fence behind it. This just in front of her as if you were about to use it.

  (3) now, what you have to do, is to open the printer as you will change the ink and on the right side, there is a plastic guide that prevents opening all the way to the top. Look on the side and you'll notice that he could jump off with fingers. pop off and open it completely open, so you can get to the screws of the cover you would have prevented access to.

  (4) press the scanner part and the upper part against the back wall.

  (5) all the screws you will be remove are the size T9H torx screws. There are ten total. There are 2 black screws in the top of the forehead and then 4 black screws in the top of the back. Remove them and put them on your paper plate.

  (6) following is 1 screw silver short located under the Control Panel, use your finger and feel under the * button. Unscrew, place it on the paper plate.

  (7) depending on whether you want to remove the face/Control Panel to get in the last 3 screws so locate the illustrations on the top of the printer, there are 2 on the lower left and 5 at the bottom right (1 and 2 on the left explain removals of paper jam and 1-5 on the right then explain change in ink cartridges). then about half an inch South of the illustration of the number 5 on the lip, is a plastic stand. six inches to the left is an another then 6 inches to the left, under the number of the illustration 2 (remove the paper jam) is a third support. Unscrew using your nails. Flip it up just like the hood of the car, and eten on the main top of the printer, keep the flat wire which is connected to the frame of the control panel (if the flat wire jumped because you got too loud, then simply insert it in when you go back).

  (8) then unscrew the 3 long silver screws that are located under the Panel you just popped off the coast. There is 1 on the left and 2 on the side rightish. mix 'em on the paper plate.

  (9) now that all the screws are removed, take the Panel front and partially pop it back together.

  (10) then take all over (the part with the small illustrations and lift like a hood of car, ONLY THIS TIME OPEN IT LEFT and he balanced on the edge of the printer, to lean over towards the wall or an obstacle on your left.) MAKE SURE NOT TO PULL ON THE STRIP OF COLORFUL SON FRUITS LEFT AND ALSO THE FLAT BLACK WIRE CONNECTING PART SCANNING FOR THE MAIN OF THE PRINTER PART.

  (11) then take the pliers to tapered spout and remove the 2 silver tension springs located behind the printer cartridges. Pay attention to where they were attached so you remember where they go during the Assembly. take a picture with your phone if you have to, or simply re - understand it like I did. mix 'em on the paper plate.

  (12) then disconnect the 2 large flat wire and 1 small flatwire attached to the back of the ink cart. take a picture or can remember like I did. I guess bad things can happen if you reverse the on re-Assembly. Pick up the phone and take a picture of quik to be sure.

  (13) now remove the cart ink, cartridges and all, by lifting the front first.  Be careful of the transparent tape little there that moves the carriage from left to right and vice versa. you don't want to damage this little guy. now take the transport to your paper plate. not some ink or accidentally get it on your fingers without knowing or will make a mess.

  (14) remove the ink cartridges and put them on the paper plate, side ink to avoid a mess, these things sometimes drip. put the plate side. its time to clean the print heads.

  (15) then go to the sink, to the distribution of empty ink and turn on the hot water and then let the transport of empty ink sitting there with the water mainly through the clogged color screen (inspect and make you is not a small rubber seal surrounding the small screen, if there is do not waste it. I didn't look too closely and I don't think that hp has them but I have a few other printers). It will stain the sink but water ink he comes out to be sure. notice there is also a small circuit attached to it. don't bang it upward but getting wet does not matter.

  (16) continue to do this until the water is clear.

  (17) then use your finger and rub the screen gently with your finger and then rinse it, taking ink until the water is clear. This continues until there is no more ink and screens are clean. do it for all the colors just for good measures. the color of problem that would not print, you'll notice takes longer to clean than the other colors.

  (18) now look on the lower side of the transport. these strange looking things are the leaders. Rinse in hot water and dry them with paper towels. then flip it over and the breath on the side of the screen again. also between the screenside and heads (on the side of the transport) is an opening which is also probably gunked up. It blows with water too. Then, turn it over and wipe the head again. Repeat this step until no fades or until you are sick and tired.

  (19) shake, then use paper towels to dry the entire unit. Make sure that the device is dry.  especially inside the female plugs. blow inside or out dry hair and dry gently. do not stand there and melt the but with the blow dryer. but the sooner it dries less your ink cartridges, sitting on the paper plate will dry out. the custom of the ink dry quickly just do not take a NAP or go on a date until you're back with part of the ink.

  (20) now you have finished cleaning the heads and probably don't need to do it again for the length of time, it was because you bought the printer. and just as a roadtrip you used a map to navigate, you will use these instructions in reverse for reassembly. but keep in mind when re - insert the 3 flatwires that you disconnected from the back of the ink cart, make sure you that have small metal contact on the flatwires points (side male) inserted so they affect small metal contact points on the caps of transport (feminine) side. ALSO BE VERY CAREFUL NOT TO DAMAGE BLACK FLATWIRE CONNECTING THE SCANNER PART PART HAND PRINTER. THERE IS A SMALL GROOVE IN THE PLASTIC WHERE IT CAN SIT TO GUARANTEE NO CRIMPAGE. USE IT. also make sure that the 2 hinges to the scanner portion/cover are placed correctly before the fixing of the top with the 6 black screws.

  now raise the printer and reinstall the ink cartridges. then plug in the appliance and turn it on.  If you get notifications on the control panel telling the custom of transport move, then open the trunk and remove the ink cartridges, hustles and ensure that transport is installed and that the tensioner springs are in place correctly. Repeat the operation if necessary until notifications go away or just do a test print and do not take into account the notification if you messed with it a few times already. That's what happened to me and the notification went his own. Once its online, open the hp utility and press the button "clean the heads. do 2 x in a row and you will be in style, with colors extremely rich and "BOLD" and Yes, printed black raven.

  p. s.

  You can always take your aggression out with tree limb loppers or Tin shears like I did and cut the plastic Center keeps you to transport directly outside. Completely eliminates the disassembly and reassembly. Make sure you DO NOT CUT THE TRANSPARENT TAPE THAT MOVES BACK AND FORTH TRANSPORT. This way the next time it happens it takes you only 10 minutes before you are upward and printing.

  Enjoy!  -Porf

• HP Officejet 5740: Msg 'printer is in an error state.

  Hello

  I have a 5740 which is defined as a remote wireless printer by itself in my home network.

  Recently, I received the message 'printer is in an error state' when I press print and found out the print job will be lance automatically, only after I turned the printer off and restarted. What happened several times. I tried to use HP & Doc Scan printing, but this did not help.

  Appreciate your advice on the following points: -.

  1. What is the cause for this?

  2. connecting the printer via the USB port on my HP All in one PC would help eliminate this recurring issue?

  3. If Yes, should I uninstall the printer software first?

  4. always print wireless from my laptop or mobile devices when the printer is connected via a cable to my PC?

  What do I have to uninstall and reinstall the software for printing these devices as well?

  5. when I reinstalled the software, it come a last step where it will ask me to register so far HP ink. As I have already registered for the program, what should I do to allow me to complete the installation of the software without duplicating a new series of HP ink instant registration?

  Thank you.

  Hi @Chrissy_61,

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you use a HP Officejet 5740 e-all-in-one printer with a Windows 10 computer and you need to restart the printer to clear a State of 'error', so the printer will print. I would like to help with that.

  There are also a few different reasons why something like this can happen. It could possibly be network or firewall related, or maybe even related software.

  I would like to begin by downloading and running the tool HP Print and Scan Doctor to check the installed printer software. This tool can diagnose and solve many problems of printing software and printer.

  You can also check to make sure that the printer firmware is up-to-date. On the Control Panel Home screen controle control printer, drag your finger from right to left on the screen and select Setup. In the menu select Maintenance of the printerconfiguration, and then select update of the printer, and then look for the updates of the printer.

  If the printer doesn't have the printing problem with PC and not with cell phones and mobile devices, you can try following the steps described in this document of support - printer is offline (Windows).

  If you plan to use a USB between PC and the printer connection, you do not need to uninstall the software, you just remove the printer devices and printers on the computer and connect the USB cable.

  You can always the printer wirelessly with other devices if you have a computer with a USB cable.

  Finally, you need not re-register with the HP Instant ink. You can close the windows when they open after you have installed the software.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Officejet 4620: Office Windows 10 connects to the wireless network printer but do not print

  I have a HP Officejet 4620 all-in-one that I try to use with my desktop computer. The printer has been added to my home network, and I added the printer to my computer via the tab "Devices" Control Panel settings, but when I try to print, nothing happens. The printer icon appears in the bottom right of the task bar that says the printer has "0 documents pending. Strangely, another computer in the office at home, also running Windows 10, can connect and no problem printing to the printer. I tried to install/reinstall the drivers, reset my computer, reconnect with and without a cord USB, and none of this helps. Any ideas on how to solve the problem? My computer was running on Windows 7 until this month when I updated for Windows 10, so I don't know if it's part of the problem or not.

  Hi @leopleuridon,

  Welcome to the Forums of HP Support!

  I see that you are unable to print to your printer HP Officejet 4620. I'd be happy to help you with this. Looks like the driver is damaged.

  The software and the driver could have gotten corrupt, so we will need to remove it and reinstall.

  First of all. Please follow the steps in this guide:

  • HP printers - printer problems after upgrade to Windows 10
  • Run Windows updates, keep your computer current with updates for Windows.

  If the problem persists, follow these steps to see if you can solve the problem.
  Let's start by cleaning up your computer.

  • Cleaning disc in Windows 10.
  • Perform the clean boot in Windows 10 / 8 / 7.
  • Use the System File Checker tool to repair the missing or damaged system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  To properly remove the printer and drivers, follow the steps in this Post by my colleague @X-23.

  • I hope this helps. Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• OfficeJet 4620 analysis no or copy but no print

  My Officejet 4620 analysis no or copy but no print. The top is out, but I had reset (I hope). Unable to get above where take place tie scan and copy.

  Hello dbertentha,

  Welcome to the HP Forums.

  I see that you have a problem with scanning and make a copy.

  I see that you said that the upper part of the printer broke but you were able to get back on and now that is where the problem is happening with not being able to scan or copy.

  You are able to print, so we know that you have a communication between the printer and the computer.

  I do not think that this could be a hardware problem and if this is the case, we will then have to contact HP Total care.

  To contact HP Technical Support. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thank you for your time.