printer offline does not connect

Similar Questions

• My printer driver does not connect to my new laptop

  Original title: too old printer?

  My printer driver does not connect to my new laptop it says my hp7150 is a usb device that is older and may not work with usb 3 try usb 2?

  Hello

  You should be able to operate...

  Did you install the software for your printer, or just plug in?

  You can actually have more luck with the USB 2.

  I think your laptop would have at least a USB 2 port. Glance to one that is not blue...

• HP Officejet 8500 printer A909b does not connect to ethernet wired network.

  This is my first time on a forum & I am hopeing for some successes my network with printer setting

  .

  I am networking two PC Win XP, SP3, running with a printer Officejet 8500 A909b via a Netgear router.

  Previously, I had the printer connected by USB to a PC as needed with no problems except having to change the USB between PC to print.

  I tried several times to uninstall and reinstall the printer software, disabled the firewall & Anti virus, reset the router, reset the printer network settings & them restarted everything with no success.

  I printed the network configuration page & tried to enter the address EWS (http://0.0.0.0) in the browser Web without success either.

  I found the lights on the printer on the ethernet port does not at all & tried four different ethernet cables all work elsewhere. I tried all four ports ethernet to the router also.

  Thanks in advance for any help I receive.

  Concerning

  Allan

  Hello

  As network lights are not flashing when the cable is connected and the PC works with the same cable, which seems to be a faulty network card defectueuse on printer, please contact HP and they should be able to help in this regard.

• While a printer C4580 - does not connect via radio

  Hello

  I bought this for a wireless printer, but I can only print via USB, which is not of much use!  I tried to turn off all firewall but still no luck.  My wireless router works fine all around the House, but I can't talk to my laptop in the printer.  It '' also fails the test print to the last step!

  Can someone help as I know what else to try...?

  You did not mention what you tried to do. You have only to set the USB and after confirmation it print, removed the USB and tried to print? If this is the case, you will need to create another icon of the printer for wireless connection.

  Remove the USB from the printer. Insert the cd supplied with the printer. Click Add a device. then choose to connect to the network. It will search for the printer and won't say no printer found. Instead, click Next. You will be asked to connect the usb temporarily. Then you will locate your network. Can connect you to, and then type the necessary information if prompted. Then it will search the printer once sound on the network. Continue with the installation until you are prompted to unplug it from the usb. You will then have 2 printer icons. One for the usb one for the wireless network. You can check when you go to printers and faxes in Control Panel - where you have Win XP

• Finger print reader does not connect for Win7 Logon Screen

  Win7 Ultimate 64 bit

  5.9.4 fingerprint software

  Biometric accepted link to windows Logon

  Client Domain Server MS

  At the start of the system, the logon screen appears and the fingerprints light is 'on '. I scan my finger, the light blinks once and no presentation of the Windows password in the logon window. I have to enter password.

  Lenovo support asked me to uninstall software, of the clear BIOS saved digital fingerprints then re - install (and re-record). I did it twice without any change.

  It worked until I had to break the connection of field (server change) and re log on to the domain with the same opening of session and password. It was at this time that the finger print reader stopped passing the biometric password to the BONE.

  Any thoughts on how to re - connect the reader to open a session?

  If you enter the control panel and search for "biometric" you should have an option to 'change the biometric parameters '. If you click this option, you should have a checkbox indicating "Allow users to log on to a domain by using their fingerprints", make sure that having checked if you want to connect with a domain account using your fingerprint. When remove you / add the computer to a domain, so I believe that this option will be restored back to being disabled must be re-activated.

  -gan

• photosmart HP b210a more does not connect to the server.

  I installed this new printer a few days ago and it works wireless laptop problem, phone and pad. So now all of a sudden I can't print wireless. The printer says does not connect to the server if the wireless works. The wireless working on my computer too. Repeatedly, I installed the installer hp for Lion, I installed the drivers from HP on the Apple site.

  Technical specification:

  iMac running Lion

  Mac Book under Snow Leopard

  iPad

  iPhone 3 g

  AT & T Uverse router

  Thanks to anyone who can help!

  The router rebooted, reinstalled again and it seems to work? Don't know what went wrong.

• Hall 13: HP pavilion laptop does not connect to the printer HP envy range 7640

  My laptop does not connect to my HP envy printer. It keeps saying the driver is not available or is it ready, but does not connect. I know the printer is working because I can print from my phone. Anyone know the driver I need to download or what to do?

  Ruizgeraldine

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the problems with your Envy 7640 in Win10 printer and wanted to help.

  The problem is that by default HP print drivers installed by the upgrade of Win10 often do not work.  I have two HP printers and neither one worked after the Win10 upgrade.  We also receive a lot of messages of other people with the same problems.
  
  I linked the page drivers and software for the Win10 drivers for your printer: http://support.hp.com/us-en/drivers/selfservice/hp-envy-7640-e-all-in-one-printer-series/6617267/model/6617268#Z7_3054ICK0K8UDA0AQC11TA930C7

  You must download and install the full feature software and drivers for the printer.
  
  Then unplug the printer and install the software.
  
  Do reconnect the printer until the installation program invited to do so.
  
  Once the installation is complete, restart.
  
  You should then be able to use your printer in Win10.
  
  Good luck
  
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  Please click on 'Accept as Solution' on the post that solves your problem to help others to find the solution.
  Please click on the symbol of the thumbs-up to the left of the answer key to say thanks fopr my help.
  ========================================================================

• iPhoto does not connect to buy prints

  IPhoto does not connect to the server in order to buy prints and maps.  Is there a solution for this?

  There are 9 different versions of iPhoto and they run on 10 different versions of the operating system. Tips and tricks for dealing with issues vary depending on the version of iPhoto and the version of the operating system. In order to get help, you need to give as much information as possible. Include things like:

  -What version of iPhoto.

  -What version of the operating system.

  -Details. Full, a description of the problem as you can. For example, if you have a problem with export, then explain by describing how you try to export and so on.

  -History: Is it going hard? Everything has been installed or removed? -Are there any error messages?

  -Have what measures you already tried to solve the problem.

  -Something unusual on configure your? Or how you use iPhoto?

  Anything else you can think of that could help someone understand the problem you have.

• the Air iPad does not connect to a printer to air even if the two are on the same network

  DIIAP Air does not connect to air printer, even if the two are connected to the same network. Message "Air printer not found".

  Readhere: printing from your iPhone, iPad or iPod touch - Apple Support

• MacBook Pro 13 inch: Mac Pro does not connect to 5510 e printer

  I have problems connecting with one of my printers.

  My iMac will connect with my printer (an HP Photosmart 5510e and Photosmart 7280) wireless without any problem.  My 13 inch (2009) MacBook Pro connects to the 7280 wireless but does not connect to the HP Photosmart 5510e device.

  I recently had to restart my MacBook and reconnected it to a printer without any problems.  I can't find the driver for a printer so I don't know if the 5510's could not reload when I did the reboot.

  Any suggestions as to what I should have fact/do to recover from the situation?

  @Hahti

  You have installed the driver yet?

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-5510-e-all-in-one-printer-series---B1/5053904/model/5053905

  REO

• Wireless printer Lexmark X 4850 and a netgear router that does not connect while I can print

  Rookie PC user...

  I have a Lexmark X 4850 wireless printer and a netgear router that does not connect while I can print ggggrrrr....!
  I checked all plugs and connections, the reboot several times and am about to throw it out the window... Help!

  Hello

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like the wireless Lexmark X 4850 printer is not to connect to the wireless router.

  Visit this link that should help you with this problem.

  http://support.Lexmark.com/index?page=content&ID=FA697&locale=en&UserLocale=en

  Note: Using third-party software or the link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software, or the link is at your own risk.

  If this fails to resolve the problem, visit this link and read "need help?"

  http://www1.Lexmark.com/us/en/view/printers%20&%20MultiFunction/Lexmark-X4850/CATID=cat170005-category&prodId=4145-product

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• HP Deskjet 2540: Printer does not connect

  Hello! I managed to connect my printer via the cord, but all my efforts to connect wireless have not been successful, even after you install the drivers appropriate for Windows 10. It seems to connect and to detect the router but when it promts me to enter information to check the connection, it does not connect. He also promts me to enter the information that is displayed on the printer, but it is not anything related to this wireless network. Help, please!

  Hi @paige101us and welcome to the Forums of HP!

  I see that you have connectivity problems.  I would like to help!

  I would recommend your computer off.  Once the computer is down, unplug the power cord from the printer and the electrical outlet and remove the power of your router for 60 seconds.

  After 60 seconds, reconnect the router.  Once the router has started broadcasting, reconnect the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  After that the printer is turned on, run the wireless configuration.

  I also suggest this document:

  Troubleshooting wireless printing Center

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Apparently, I got an automatic update of Windows XP. All of a sudden my computer does not connect to my HP Laserjet 1000 printer.

  All of a sudden my computer does not connect to my HP Laserjet 1000 printer. These work very well together for several years.

  Now all of a sudden I get a message that the computer cable is not connected.  I tried to charge the printer program.

  I unplugged and reconnect the cable to the computer, etc.. The system does not work.

  I learn by two other people, who have automatic updates of Windows, they had the same problem. We have a Kodak

  printer and the other has a Lexmark printer. This makes me think that the problem is in the updates of Windows.

  So, what should I do to fix this? I'm NOT a computer person and I'm confused.

  James

  Hello

  · The updates have been installed on the computer?

  You can follow the procedure from the following link: printers HP LaserJet - USB Devices closing work unexpectedly in Windows XP: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=45674&prodTypeId=18972&prodSeriesId=45674&objectID=bpl11421

  You can also access: family of products HP LaserJet 1000 - Error Messages on the computer (PC): http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=240170&prodTypeId=18972&objectID=bpl11045

• HP OfficeJet 4650: HP utility does not connect to my new portable printer HP OfficeJet 4650 of my connected USB MAC

  Utility HP does not connect to my new HP OfficeJet 4650 of my Mac connected usb portable printer.  I have to turn off the printer, printer and try again sometimes that works.

  Welcome @grizley1967.

  Thanks to their participation in Forums of HP! I see by your post that the HP utility connects to the printer. I will definitely do my best to help you.

  Make sure that the printer is connected directly to the Mac with the USB cable.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Open disk utility.

  Select the startup disk in the list of volumes.

  Click the first aid tab.

  To verify permissions, click on verify disk permissions. To fix the permissions, click on repair disk permissions.

  Restart the computer.

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Feel free to click on the button 'Accept as Solution' and the 'Thumbs Up' for my help. Please let me know the results and if there is anything else I can help you. Thank you!

• HP Deskjet 3545: hp deskjet 3545 my desktop pc does not connect to the printer via the usb port

  Hello

  I installed all the drivers and the software correctly and the printer can communicate with my desktop pc for problem analysis, but when I open an editor like notepad, word, write something in them or when I open a photo and when I try to print, it cannot communicate with the printer. I used same HP print and Scan Doctor in order to study the problem by clicking on the button "Correct the impression", in the program, he sees even my connected printer (usb) or same (LAN), but printing HP and Scan doctor after reviewing all the steps and ticks as ok, when he said "try to send the test page" and when he tries to send it to the printer It does not send and I choose "no print" to see which program will thus be, discover the program this time said "send the in-house test page", and I chose this option to send it internally and the printer works. The program says "there is a problem which can not find this application for assistance. try to uninstall and reinstall the drivers as an adviser"but I uninstalled and reinstalled the drivers and seems that there is no error, or any problem with the drivers, but seems that it cannot connect to the printer, even if I can use the scanner of my office and it connects to the printer without problem. What can be the problem? How can we solve this problem? any help would be appreciated. Thank you. Windows XP Professional Edition, 32-bit SP3 is installed on my desktop.

  Sincerely

  Hello metehangunaydin,

  Please try the procedure below so that you can at least be able to print.

  1. click on the Start button on the computer.
  2. then click on Control Panel.
  3. then printers and faxes
  4. in the top left, click on add a printer
  5. click Add a local printer
  6. and while "Use an existing port" is selected, select "Virtual USB port... "and then click Next.
  "7. in the manufacturer list, select HP, then under the Deskjet 990 c printer list", then click Next and complete the wizard

  Now try printing. It should work.