PRINTR

Similar Questions

• HP DESKJET 3320 PRINTR NO PRINTING

  My printer HP 3320 does not print when you use the programme of MUSIC FINAL.

  Hello

  ·         What exactly happens when you try to print using the final music program?

  ·         You receive an error message when you try to print?

  ·         Were you able to print this program before?

  If you use final 2009 (Make Music) then I would refer to the link provided below to verify the solution available since the program needs action because it is not compatible with Windows Vista and which could be one of the reasons why it cannot print.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=finale%20Music

  For further assistance on the matter, you can even contact the final music Support and check if there is a problem with the compatibility of their program with the printer.

  http://www.finalemusic.com/support.aspx

  You can also post your question on the link provided below for assistance.

  http://forums11.itrc.HP.com/service/forums/home.do?admit=109447626+1301541034178+28353475

  Note:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• 2840 printrer prints "[none]"-water

  1 HP Color laserjet 2840

  2 XP 64-bit

  3. no

  4. change color setting gray scale

  Change color setting in the preferences to print in grayscale, watermark, [no], appears on all pages.

  I tried setting the color of the return to normal, no change.

  I tried to create a new "no" with no text in it, no change.

  It continues to be all a few months and I never remember how I fixed the last time...

  HMP, oldest fix in the book, turn off and on again! works every time.

  But seriously, this printer has been * literally * more trouble than it's worth since the day we bought it. GRR

• I have a hp office pro8610 is my default printr trying to print wireless, but remains in the spooler

  How can I get stuff to print from laptop running win 7 on my main printer through a hotspot

  I'm sorry, you are going to have to explain your problem a bit better.

  You try to use the 'eprint' of HP service?

  You try to connect your computer to the printer via wifi?

  The "hot spot" a device is provided to you by Verizon?

  You connect your laptop to the Internet via this "hot spot"?

  Is the printer connected to ANY computer by USB cable?

  Have you ever been able to print using this printer?  From your laptop?  Another computer?

  Why do you think that HP does not support your printer?  HP support for your printer page is here--> http://support.hp.com/us-en/product/HP-Officejet-Pro-8610/8620/8630-e-All-in-One-Printer-series/5367603/model/5367606

• Cannot remove printring great work

  Cannot delete page 28 (a job) in Quebec

  Try to clear the print spooler

  1. click on the Start Menu, type in the search '' services. ''

  2. select Services, and then press enter

  3. a box will appear, with a list of services looking for a right click "Print spooler" and select stop (do not close the services box still)

  4. navigate to C:\WINDOWS\system32\spool\PRINTERS, you will be prompted by UAC click on continue.

  5. in this folder, delete all the files you have there (it's all print jobs that could be blocked)

  6. return to the Services, right click on "Print spooler" and select start

  This should clear up your print job

• C4585 stopped print wirelesly All in one printr

  Has been connected to my lap top via BT Home hub wireless link and work. Arrested and all the attempts of correction have failed, unit has taken over and replaced yesterday. Nations United installed all previuous software and tried to install. Wireless will not work. When you try to configure the network I get the error message #201 VSA or UDP port 427 is blocked due to firewall issues. Activated the firewall off but printer not found despite the message on the report of the wireless network test that said congratulations for the success to the top of your printer.

  Laptop is Acer Extensa 5620ZG XP pro

  I have connected to the printer via USB and everything works fine

  My wireless works fine as I have an internet link through my BT home hub

  I printed my HP network configuration page, and I have the IP address as 192.168.1.92

  I ping that IP in the back and it times out

  Now for the confusion, if I try and set up a new network and print my network settings wireless network SSID name is shown as the letters and numbers in my wireless network settings and letters BTHomeHub-then on the HP Network page. I am confused and getting very frustrated that my counter partners above does not work, but neither not binding its internet. It uses a HP w1907 desktop that worked very well and wireless printing yesterday. Did the same on his PC and get exactly the same results except for when I ping the wireless router, that it does not find even with an ethernet connection. Internet works with ethernet connection, but if I have IPCONFIG in Dos it just expires

  Any help gratefully received

  I wonder if your printer is not connected to the same network as your Acer laptop wireless?  Your Acer laptop, do you see other wireless networks?

  In addition, the desktop internet connection does not work if you turn the printer off?

• Wireless Bluetooth speakers

  I have a wireless speaker Jam HMDX trying to connect with MY HP TouchSmart 520-1100 x PC running Windows 7.  I can't succeed.  What I am doing wrong, or what is the right way?  I spent at 'printrs and devices' click 'Add a device' and my speakers is not recognized.

  Hi SmileyGuy,

  You did very well follow the suggestions that I have offered. In my opinion, computers are pretty complex machines and there are simply a lot of knowledge. The speaker works fine when you use the wire to connect? Let's hope for that, as much for you. Spend a day wonderful, SmileyGuy.

• Install a HP psc 750 on a new system of windows 8.1

  I just picked up a new HP all in a Pavilion 23 inch pc.  I have an old PSC 750 all in one HP printer.  I went to the site of microsoft web and verified to the Compatibility Center for this printer.  It says compatible - no action required.  However, I don't know what that means in terms of installation.  I just plug the old pc to a usb port and it works because microsoft already has a driver in the operating system?   Or what I need to load the original disc supplied with the printer to install the software?  It is hard to believe that all that is on the original CD 9 years ago will work with the new OS 8.1.  Even the last years all in one HP officejet 4630e printer requires a download before you try to install from the HP website.

  Hello

  No more assistance for her since the age of Vista or at least 7 years ago:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093 & LC = on & CC = in the & DLC = in & sw_lang = & Product = 57769 #n177

  In terms of compatible, MS wrote that no action required, which means supplies MS one driver compatible (basis printring) in the operating system (Windows 8.1). You're right, many printer CD is born before Windows 8 and 8.1 so they know nothing about Windows 8 is down to the track. Who knows what is next to Windows or Windows 201 9! *

  Kind regards.

• Photosmart C6280 all-in-one: connected LAN network won't print or scan

  I am running Windows 7 (64-bit) and have a HP C6280 connected to my local network. My NetGear router shows the printer as a device on my network. Windows Control Panel will display as loans and set printer as default. When I try to print, the release of the coils for the print spooler, but then shows a printing error and nothing prints. HP Solution Center shows as disconnected printer.

  HP print and scan doctor can see the printer but cannot print a test page for it or fix the problem. Cannot printer Windows troubleshooting. I put manually the printer IP address and it corresponds to the IP address used by the pilot, i.e. 192.168.1.107

  The only way I found to solve the problem is to completely uninstall and reinstall the printer and all the HP software associated with it. And then I have to do it again on all 2-3 days.

  Any ideas?

  RnR,

  Thanks for the suggestions, but I did that already, severl times. It turns out that BitDefender Firewall was interfering with my connection on printre network. After fixing manually the printer IP address and establishing a zone of confidence for the IP address of the printer for, things seem to have settled down.

  Found this solution in the HP Forum.

  Thanks for the help of yor

• e-printing expandable pages

  whenever I have e-print pages of my Tablet wireless to my HP D5560 printr, he finishes the job asked and then said to ofpaper. I put the paper in and it starts to print the pages again.

  Thank you abacuslearner. If you use the ePrint, can you check the number of copies to have a value of 1 before printing? This has happened with several types of files or just a PDF file? You are in the app ePrint, or use a different program and share the application to start printing? If so what app start you? You can try to re-create it with double the paper loaded?

• HP 120 do not envy copyingor scanninmg

  Hello

  I have a craving for 120 HP all in one device, which is less than 2 months old.

  I connect via Wifi and my OS is Mavericks 10.9.2

  The printer prints fine from all devices, but it won't copy.  He has a message "Scanner problem.  Turn the printer off, then on.  If the problem is not fixed the scanner component is broken and can not copy or scan.

  By turning the printr off & on does not resolve the problem.  As part of troubleshooting, I have the drivers updated and done a hard reset but the problem persists.  Printing is still fine.

  Anyone have any new ideas, please.  Thanks in advance.

  Hi BHK6,

  Thank you for your suggestion; I tried and the problem persists.

  Now, I talked to the dealer where I bought the printer and they are accommodating to return to HP.

  Thank you

• printer cartridge problem, 4780

  HP 4780 Photosmart printer range;  Mac 0SX Mountain Lion operating system

  Error message: cartridge Printrer problem

  I completed all the steps my 4780 contained in customer site HP, with the exception of "Avenue" that have no troubleshooting.  The message of screen printer one message I get is 'printer cartridge problem '.  How can I get the normal menu printer on the screen?  How the problem of the cartridge can be fixed?

  Don213

  Here is a link that can help you with the "cartridge problem.

  http://support.HP.com/us-en/document/c01675471

  Let me know if you have done these steps and the results.

• Photosmart 5520:5520 won't print black

  Hello

  I just installed all new cartridges (they are real HP). But it does not print black.

  I went so all the help which is suggersted in the forum. But, no luck.

  I think that the print head is probably bad.  I spent about $70.00 for four cartridge 564XL.

  I'm too lazy on the purchase of a new black cartridge.

  Also, when I try to scan the alignment page, it says not found alignment page.

  It's more than 3-4 years. So, I probably need to buy a new.   HP maintenance tool detects any problems.

  I just wish I have not wasted $70.00 for the cartridges.  A new HP printr costs less than...

  Kind regards

  Sery

  The message here is a troubleshooting document links for the Photosmart 5520.  If steps it do not solve the problem, Please contact the HP Support, even if the printer is no longer under warranty.   If the above does not give satisfactory results so please post back here after contact you HP.

  From a post of Sunshyn2005, contact technical support HP see the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
   
  File number and phone number appear, use them to contact HP.

• LaserJet 1536 dnf: failure scanner laserjet 1536 dnf

  After the upgrade to windows 10 (64-bit) analysis feature does not work. I reinstalled the program and it worked for 5 days that he had a number of Microsoft updates and I have observed that the function of scan failed. Scanning interface indicates that it is unable to communicate but the light works and the scanner moves on the flat. Printer and fax functions work.  The drivers for the scanner are not compatible or there is a problem of communication back to the computer security prevents the generation of an image of the OCR.  Multi-funtion printr is on a LAN.

  I tried with another computer (windows operating system 7) which is connected wireless and scanning in color function worked. In addition, I installed HP Scan and Capture application available for free from Microsoft store and it works in color on my computer. You will remember that the interface for the HP Laserjet 1536 dnf works B & W and grayscale in all ppp parameters, I'll wait for an update for the drivers of HP and when I need color use HP Scan and Capture software

• HP envy 100 don't scan

  I have not been able to scan from the printer control panel in a long time, but I've always been able to browse webscan.  All of a sudden which is no longer available.  The saved Web page reflects my printr IP but the links on the homepage, scan, settings, etc. do not connect to something more.  I ran the Print and Scan doctor and that was a failure.  If I select the printer from devices and printers there are no scan options at all.  I am on Windows 7 and do not know when this ability is gone I do not often scans.  Any ideas?

  Hello

  You try to scan via Webscan or perhaps via the HP software?

  When you select your printer in devices and printers, you can see the following options?

  -HP Printer Wizard

  -See what's printing

  -Setting preferences

  -Customize your printer.

  If so, uninstall the current software from following programs > HP > HP Envy 100 > Uninstall.

  Then download and install the latest version of the software below, which should fix the problem and restore any functionality back.

  The latest version of the software can be downloaded below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109403-2&cc=us&DLC=en&LC=en&OS=4062&product=4073738&sw_lang=

  Shlomi