Problem HP BIOS change sequence, won't be in the USB first.

Similar Questions

• I have a mouse Microsoft Wireless Mobile 4000 and it won't work in the USB port that I need.

  The port that I need for work is where I took out the logitech corded mouse.   How can I fix it?  It works in another port, but not the one I want.

  Hello

  1 did you changes to the computer?

  2. you receive an error message?

  Method 1:

  I suggest you run the Microsoft fixit tool and check.

  Hardware devices do not work or are not detected in Windows FIX IT:

  http://support.Microsoft.com/mats/hardware_device_problems

  Method 2:

  I suggest you to see link and check.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 3:

  I also suggest you to see the links and check.

  I would say as update you the USB drivers and check.

  Update of the hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  What to do when a device is not installed correctly:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

• After the BIOS update can not startup Satellite C640 using USB key

  After upgrading my bios Toshiba Satellite C640-10F (PSC02E) to WIN 2.00, I can't boot the laptop using USB key, when I checked the BIOS with F2, I was stunned because the USB port connected to the laptop has been labeled as FLOPPY drive. Y at - there no possibility to downgrade the BIOS?

  Thank you

  Stand by.
  Set the BIOS to default and after restarting, use F12 to get into the boot menu.
  USB option is available there?
  What is saved on your USB device? I mean why do you want to use device USB to boot from it?

• I think I have a virus that modifies my boot sequence in the Bios. It only happens some of the time when I re-boot. I have to go in and change this back to fix it.

  My computer is 2009, and I have a MSI motherboard. My operating system is Windows 7. Thank you

  Hello

  1. What is the number of brand and model of the computer?

  2. do you get an error message? If Yes, what is the full and exact error message?

  3. were there any changes or updates made on the computer?

  I suggest you to restore the default settings of the BIOS (Basic Input Output System).

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk

  I suggest you contact the manufacturer for help with the BIOS settings.

  In addition, refer

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

• Why won't my Microsoft keyboard work during the start sequence () trying to get into the BIOS)?

  When you start up/reboot my system, my Microsoft Natural Wireless ergonomic Kayboard 7000 does not work to thus preventing me the ability to get into the BIOS to make the necessary changes. Can do something about it? Before ask you, Yes, legacy USB support is enabled.

  This problem is usually a problem with the BIOS Setup.  Several BIOS can have different settings to enable / disable the USB keyboard / mouse access.  These tend to be listed as:

  Use USB legacy...

  Activate USB keyboard...

  It is a major problem with motherboards that have the old PS/2 ports for keyboard / mouse.

  Also, I found that if your keyboard is not directly connected to a rear USB port, you may have this problem.

  And according to the number of devices USB is connected to your PC, if you 'maxed out' device (all ports used), your keyboard is not working as it should during the windows "pre-seed" process (including the BIOS screens "P.O.S.T.".)

• Portege R200 cannot set on the BIOS boot sequence

  Hi all.

  Our R200 entered mode of hibernation after that the battery power is low, then by some unfortunate twist of fate, the battery got deleted accidentally. Now it does not start correctly because every time it displays a BSOD stating Unmountable_Boot_Volume.

  I could solve this problem easily by disabling the hiberfil.sys file, which is the reason for the BSOD, if only I could change the boot order. Unfortunately, enter the BIOS, I am only able to access the first page where the only editable elements are time, date, and passwords. Pressing Pageup and Pagedn does nothing. The BIOS is updated to the last appearing on this site.

  Pressing F12 or F2 when the toshiba logo and icons appear does nothing no more. It's a HARD disk 1.8 "and there are no adapters available in our region. I can boot from a CD if and only if I take the HD. But then, it is useless since I can't fix it like that. It is not recognized if I it reconnect after booting. When I reboot, it does the BSOD thing again. It is becoming a frustrating cycle.

  I scoured these forums for other ways to boot from the CD and apply the suggestions, like hitting 'c', nothing helps.

  Any help would be much appreciated.

  Thanks in advance.

  Hi, the CWB
  What about the boot from usb?
  a stick with a live like bartpe or similar system...

  hard drive cannot be recognized once you have started your machine, because the boot when Initializes the hardware...

  the drive is correctly recognized by the bios?
  refer to the manual, it should there have listed the key combinations to start other devices...

  I think that the hard drive was missing...
  try to boot from sd card - * boot sequence settings must be changed in bios... *
  If you are not able to make this request a servicepartner...

• Automatic setting of the M58 BIOS change after a few days.

  In fact, the problem is related to the boot sequence.

  I put the system BIOS AHCI disable and the HARD drive on the boot option will be excluded and I have to manually change the IDE HDD to the included side so that the system to boot from the HARD drive.

  But after a few days, the system will ask me boot error 1962 durong.

  When I go to the sequence, the IDE HDD going to sit on those excluded from BIOS to start starting site.

  Try to Flash the BIOS to version 5ckt48aus to 5ckt50aus (Latest), already, but still hit with the problem.

  Help, please.

  You can refer to the URL below for more visibility.

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=SF08-D0203

  Hi Peter,.

  The problem I encounter is due to AHCI HARD drive setting and only after WOL.

  If you do not use AHCI 3, 4 & 5 will be AHCI / IDE HDD SATA not.

  You can change the BIOS setting followed steps below:
  1. power on the system and press 'F1' enter the BIOS utility.
  2. go to the "Device" option, make sure that "Enable the SATA AHCI" change to "disable"(if you don't use AHCI, pls ignore this step).
  3. go to the "Start" option, select "Boot Sequence"
  and ensure that the IDE HDD: is not in the section 'Excluded from the boot order' to [Primary] start sequence screen.
  4. press "2" to enter "start sequence screen [automatic],
  and ensure that the IDE HDD: is not in the section 'Excluded from the boot order' to [Auto] sequence start screen.
  5. press "3" to enter "start screen for sequence [error],
  and make sure that the IDE HDD: is not in the section 'Excluded from the boot order' on-screen of start sequence [error].
  6. press "F10" to save and exit the setting.

  Make sure that the HARD drive is not in the list of the excluded for all 3 optios. Primary, automatice & error.

  Let me know if this helps or not.

• Inspiron 15 and Ubuntu 14.04: parameters of the BIOS change removes partion "ubuntu".

  Inspiron 15 3551

  BIOS Rev A00

  14.04 Ubuntu preinstalled by Dell.

  My laptop is brand new. I went through the initial setup in 15 minutes approximately. This has worked well. I rebooted several times without problem. At this point, the boot options are (if I hit F12 at startup):

  Tittle: Startup Mode is set to: UEFI with legacy OPROM: secure boot: off

  THE LEGACY OPTIONS:

  Hard drive

  UEFI OPTIONS:

  PEBOOT

  Ubuntu

  HDD1 - OS UEFI (TOSHIBA )

  Please note that I never really used the start menu. I just use the default value.

  After a few days, I tried to change how the function keys worked, so I restarted and is gone the BIOS, change this setting, then choose 'save changes and "Reset". Restarted the laptop, but couldn't find the good disk (or partition, or whatever - not sure of the exact terminology). A flashed on the screen error: couldn't open '\EFI\BOOT\fallback.efi': 14

  Then the only choice I give myself is to boot from the recovery partition, forcing me to do a reinstall full - 15 minutes more loss of all data.

  If I hit F12 at startup while the laptop is in this State, the boot options are as above, except lack the "ubuntu" option, as follows:

  THE LEGACY OPTIONS:

  Hard drive

  UEFI OPTIONS:

  PEBOOT

  HDD1 - OS UEFI (TOSHIBA )

  I ran the ePSA assessment system, and it shows no problem.

  This problem is reproducible. I've walked through the entire sequence 3 times.

  So, what gives? How can I change the BIOS settings without losing my OS partition?

  Thank you

  Joel

  Today I received my 3551 Dell with ubuntu.  I am facing a similar situation.  If inherited boot mode, then something happens to the boot process for the uefi firmware.  I'm trying to understand uefi starting the process as well as the Partion of EFI (ESP) system works.   A good place is-

  www.happyassassin.NET/2014/01/25/UEFI-boot-how-does-that-actually-work-then/

  Once something bad happens recovery dell comes into play and reinstall everything.

  Another problem that I face is that the process to create a recovery on a usb flash drive media fails. I used different usb pen drives but runs aground with each of them.  The recovery flash drive me would be useful if the computer is required to be returned to factory State.   Please inform your experience with it.  I wonder what partition used by the dell recovery program.

  Also inform if drivers for Windows are hidden somewhere on the hard drive.

  Thank you.

• NB305-442BL - problem with BIOS

  Hello friends

  What happens is that while the mother this screenshot blue machine and since that has begun since I did a BIOS update, it comes to update the BIOS for NB305 netbooks, but it seems I'm wrong on the model already I noticed that the machine was a 442BL, may be able to correct for the machine for me BIOS no problem , or there will be a form any of the decommissioning of the BIOS of the machine to which I had before giving problems, greetings

  Post edited by: Fercheins

  Hello

  First the NB305-442BL is not known to me, I googled for this model number and cannot find a template containing this serial number. What NB305-xxx you have exactly?

  Secondly, I think that the BIOS is not the problem here. Generally it should be impossible to upgrade the BIOS if you want to use the version of the BIOS is not compatible.
  Usually, you should get a message saying that the BIOS is not compatible during the updating procedure and the update procedure should be cancel automatically.

  In your case, I recommend the BIOS to default settings. Access the BIOS by pressing F2 for the BIOS settings. Here, press F9 for default settings, and then save changes F10 before you exit the BIOS.

  In addition, the BSOD can be caused by software problems. Perhaps the system is confused to have you tried a fresh install of OS to make sure that the BSOD isn t caused by the failure of the system? Would be worth a check.

• Problem correct launch of sequences shortcut on the desktop file

  I created a shortcut on the desktop that runs successfully a sequence file.  The icon I have chosen was "C:\Program NIUninstaller Instruments\TestStand 3.5\UserInterfaces\Full-Featured\LabVIEW\TestExec.exe".  The problem is the following:

  I have several set up desktop shortcuts to launch multiple sequence files.

  If the operator closes TestStand before closing the current file in the sequence, by activating another shortcut, TestStand opens with the previous sequence file loaded.  The file in the correct sequence is displayed in the ListBox on the left of the screen; However, the file of the previous sequence is loaded.  This will inevitably cause confusion with the operator.

  Any ideas will be appreciated.

  Thanks in advance.

  2 options:

  1. tell the users to close the sequence when they are made by choosing File > close all files of sequence and executions.  TestStand remembers the last sequence which was open.  He re - opens there next time that TestStand gets run.

  2. change the source code of TestExec.exe close the file in sequence on farm.  Or do not remember the open movie file.  If you are using the full user interface, you want to look in the VI called Full UI - configure Application Manager.vi which is called UI - full Initialize.vi.  You will see a property with ReloadSequenceFilesOnStart node.  Change the enum to ReloadFile_All to ReloadFile_None.  Rebuild the exe file, and then deploy it.  You will have to look for it if you use the Simple graphic interface, but it will be the same property node.

  If you go with several it's more work for you, but then you don't have the problem of the operators running the wrong test on WEAR it wrong.  Option 1 is a matter of training.

• tried to create an account with xbox (software on my computer) and it won't let me download anything from there. Is there a setting I need to change or take it back to the store?

  I just bought a new laptop about 4 days ago. It came with 10 Windows. The problem I have is, it does not download anything. I tried to share a youtube video, and it wouldn't let me. I tried to create an account with xbox (software on my computer), and it won't let me download anything from here. Is there a setting I need to change or take it back to the store?

  Thank you

  Michelle

  Hi Michelle,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are unable to download anything.

  I would like to know some information.

  1. You are connected to the internet?

  2. You get no matter what error code or error message?

  Please check the date and time system and check if it is up-to-date.

  If it is not set correctly, please follow the link to change the date and time:

  http://Windows.Microsoft.com/en-us/Windows-8/clock-out-of-sync

  I suggest you follow the steps to run the internet connection Troubleshooter:

  Follow the steps below:

  (a) affects Windows and x together and select Control Panel.
  (b) click on troubleshooting.
  (c) click show all in the left side panel.
  (d) click on Internet connections.
  (e) follow the on-screen instructions to resolve this problem.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• m8100y stopped no boot, no beep, light food. No software or BIOS changes.

  Hello

  I have a m8100y PC which ceased boot, no beep or any other activity (spining hdd or all other front panel lights) light on power visible from outside is light up. There is no software or BIOS changes. He used to work fine and the next day it does not start. I spent the cord with my monitors cord to make sure it's good. Also open the front panel to ensure that the contact of the switch is good.

  What would be my next steps to identify I have

  (1) power supply is ba

  (2) card mother or other components are a problem

  It is a machine for 3 years and older, can the CMOS battery cause me to not start? What does the beep System x many times to warn that. I hear no beeps and the CD wont open, so I know that there is a power problem. But the power supply has an outside light that truns when I plug in the power band.

  You will appreciate a help about what my next steps should be to identify the problem.

  Thank you!

  NB.

  Naimy, welcome to the forum.

  I think you may have a defective power supply unit (PSU).  Are the replaced component in a computer.  You can disconnect all unnecessary items, for example, hard drives, optical drives, USB devices, etc.  After these items are disconnected, try to start the computer.  Here's a guide to troubleshooting of the PSU.

  If you need to replace the power supply, I like Corsair and OCZ.  I normally recommend at least 550W for peak power needs.  I suggest to measure the existing PSU and comparing them to the one you choose.

• I want to change my MacBook, but I can not connect at all to my account. It won't even show the mask connection on page of adobes, safari keeps trying but fails.

  I want to change my MacBook, but I can not connect at all to my account. it won't even show the mask connection on page of adobes, safari keeps trying but it keeps research fail.: https://IMS-NA1.adobelogin.com/IMS/authorize/ ... but nothing happens. Not on my computer, not on the mobile phone. the same problem. Cookies are okay and I never had this problem before.

  Hi Rahel,

  Please see Creative Coud connection errors

  Hope that helps!

  Kind regards

  Sheena

• Satellite P300 - problem after BIOS update

  Hello
  I have:
  Satellite P300-20 b
  PSPCCE-05J011RU
  I updated my BIOS with this update of the BIOS of your site (30/04/09, 3, 40 - WIN version)
  My problem is:
  Loading and relocation of attempt of Windows, the following error message is fixed:

  "Technical information:
  STOP: 0 * 0000007 B(0*F78DE524,0*C0000034, 0*00000000, 0*00000000)'

  So I can't respond to a portable computer HARD drive, the HARD drive is defined in the BIOS.
  Also I checked the HARD drive on the virus, it's pure against viruses.

  Could you help me to update the BIOS to a working condition.

  Hey Buddy,

  This stop code means you use a bad SATA controller driver. The installation of XP, to integrate the SATA driver for install XP. There is a lot of discussion on this issue here in the forum.

  For Intel chipset, you will need to download Intel Storage Manager of Toshiba's official site and follow the instructions here to reinstall Windows with the SATA drivers:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  Solution replacement follow the instructions posted by peterk_1. Setting IDE mode instead of AHCI in the BIOS will help too :)

• Satellite T135 - update BIOS 2.70 won't be finished

  I have a Satellite T135 Win7 running with an original BIOS that I'm moving to 2.70. I ran all the other software updates in Service Station (2.1.51) with no problems. but the BIOS downloads 2.7, initiates and cautions that I'll need to reboot (I select Yes to execute) and receive notice of popup on the electrical problem (defective DC) which corrects this BIOS, then nothing. It just stops.

  I disabled my firewall windows antivirus, but the update is still unable to fill. I downloaded the file directly from Toshiba (outside the Service Station) and run the file and exactly the same thing happens.
  The event viewer shows all the related entries.

  Anyone has an idea on how to get the updated BIOS up-to-date?

  Hi mwarwick,

  Did you install any new version of package of added value of the Web from Toshiba site? This program is necessary if you want to update the BIOS to check if you have installed the latest version.

  In addition I recommend you load the default settings in the BIOS before doing the update. Then, go into the BIOS, press F9 to load the default values, save & exit it.

  Can update you the BIOS now?