Problem HP LJ p1102w

Similar Questions

• Problem HP Laserjet P1102w

  Hello

  After several attempts and after installing the new firmware I finally managed to install the Laserjet P1102w on my Mac OS: Lion).

  However, I still face a major problem in wireless printing: the printer stops printing after a while. I installed the printer via Hello, characterized by a unique SSID and a fixed IP, auto power off, set the I/O Timeout maximum. The printer is accessible via the Web interface and prints documents via ePrint mobile printing. Even if the LED lights in a constant blue, the printer firm impression.

  Is there a major bug in the firmware or the printer is not compatible with OS 10.7.2?

  Chris

  I found the solution... never by HP printers if you own a mac!

• LaserJet Pro P1102w installation problems - USB not recognized during installation

  Struggling to configure the P1102w - using the installation DVD that accompanies it, I go through the steps. When I get to ' turn on the printer, connect the USB cable to the computer ' the printer is not recognized. Is not dismiss it, he just can't get it - it is with Windows 8.1.

  Tried it on another laptop running Windows 7 - same problem. The installer sat on the market "in waiting to connect to the printer via the USB port.  When you connect, Windows recognizes a USB device and tried to install the device - came with an error that could not be recognized and need to contact the manufacturer for the installation files.

  Update Windows, computer rebooted several times, deleted the HP installation files and tried with drivers downloaded from HP website - same problem.

  Any ideas?

  I had the same problem when working on a clients computer.

  (1) it has been infected by viruses, so we had to make a Virus removal on his computer.

  So you want to make sure that your computer is virus-free

  (2) in most Windows 8 HP computers in particular, drivers automatically installs on the computer.

  Check your device manager and click on printers. It will show what is connected.

  On my computer it shows printers >

  HP P1102W

  I had to uninstall it, to install the software. Once I did that the computer was able to recognize the USB cable.

• Professional Hp Jet P1102w Laser connection problem.

  With a Router 2 previous son worked very well.  I just changed my AT & T U-Verse was gvien a new router 2 son.  I can connect to the internet without problem, but when I try to do a reinstall my printer P1102w wireless I get the following message "the printer has been able to connect to the network wireless using the wireless identification information.  However, this computer is unable to communicate with the printer.  Please check printer is on the same network as the computer and try again. »

  I have only a single network and my hp desktop computer is connected wireless to the router.

  I am on Windows 7 Professional and Norton Internet Security 2011 and everything is updated.

  I contacted AT & T support, but as usual their help was worthless.  Any advice would be appreciated because I spent many hours trying to over come this problem but nothing works.

  Thanks, Martin

  Reboot the router by pulling its plug JUST before you start the installation process.

  What type of encryption you are using (WEP, WPA, WPA2)?

• Problems installing HP LaserJet P1102w

  Hi all!

  Can anyone help me please with this problem. I bought this printer HP laserjet P1102W is approximately 4 months. It was working fine until my service provider has changed the settings to my Lynksis modem + router. So I reset the settings for my modem and if it was configured (wireless). The modem worked fine, but he could not connect with my laser printer so I uninstalled it and it was reinstalled.

  Here's the problem:

  When installing using smart installation embedded in hardware (no CD), this password box continues to appear. Maybe I had entered a password for my printer before. Problem is that I have completely forgotten in this respect. This password thing is I can't install my printer properly. If I install it using configuration USB it works by USB not wireless. But I bought it for its wireless capability in the first place that's why I wanted that it functions as a wireless printer.

  Can someone help me please. How can I recover this password? Or better yet, if there is a way for an password is not needed?

  Thank you for your help.

  You can also join by my email: {deleted personal information}

  Primus

  ATLAST my problem is solved! I refer to the manual of the user for connection problems. I had to download the manual of a Wordpress blog. I wonder why he didn't come with the box as a paper or CD version. Anyway, problem solved!

  Wheeewww!

  -primus

• P1102w driver problem

  The other post, I've seen here, there seems to be problems with the printer drivers for the HP P1102W printer.

  To my knowlodge, I saw no solution.

  Just to add to the group, here's my problem. I bought a new Imac with the installed Mavericks. I migrated files from my old Mac on toward the new.

  On the new Imac, I tried to get the 1102w for a wireless connection. After several attempts having failed, I managed to get it connected. That's when I noticed problems.

  The first thing I noticed was that I had more duplex printing.

  Then I cound print is no longer in fashion Fast Res to save toner. All printer presets have been grayed out do not allow me to delete or modify. If I tried to create a new preset to change say res impression that it would not work. It appeared that printing was intended for high-resolution printing low speed. I checked the version of the driver and it displays 2.0. I decided to try to plug the USB cable and install the USB version of the printer. Strange thing is that now I seem to have my high resolution print back and also two back had appeared. But a problem remained however, print presets are always gray and I can't change them. the version number of this driver USB said 6.9.

  My question is this: is HP will correct or update this driver or drivers to work with the new OS x Mavericks so all of us can get this printer impressive working again as its specifications say?

  I was going along fine with Mountain Lion, then I made the mistake to remove the p1102w and put it back, all wireless.  I noticed that I lost the box for double-sided, 'Gender' has been p1102w. and my driver version number 1.0.  I went to another Mac connected to the same p1102w, and since the box on both sides and he says that the driver version number was 6.9 and the 'Type' of the window area, he registered p1100w.  When I deleted the p1102w again and went to reinstall, after clicking the sign more, I needed to select 'Add printer or Scanner' rather than simply click on the p1102w.  After that, I got a list of printers and the p1102w appeared as a Hello device.  When you click the p1102w in this field 'Use' default window is AirPrint.  Change this to the 6.9 pilot p1100w and you should get back your double-sided printing option.

• P1102w printer: PROBLEMS of SHARING of WIFI p1102w

  Hello

  My name is Murilo and my main language is not English, so sorry for any ortographic errors.

  My problem is with the part, I me am formatted my computer cause before the XP and now I've upgraded to Windows 7. I have install the printer with the correct wifi features and I can't share on another computer, I already try to install the hp software and with the installation disc. I already try also reset the printer in factory configurations and install again and nothing.

  I really need help to fix this problem, if anyone can help me I want to stay happy.

  Thank you and sorry for ortographic errors.

  Hi Muurilobf,

  Thanks for providing the screenshot. I see 2 registrations for the Laserjet P1102w in the screenshot. What happens when you try to select and continue? (I would choose the Laserjet P1102 at the bottom of the list)

  Please provide details, you were able to run the Add Printer Wizard and the IPv4 address and you were able to print, correct?

  If you can add the printer in this way, then I would be not concerned about adding the printer through the search option.

  Make sure that the Windows Firewall and Antivirus is temporarily disabled when you try to add the printer.

  Here is a document to enable the file and printer sharing.

  Thank you.

• LaserJet P1102w: Router reboot printer wireless problem cures - why?

  Ive had this printer (P1102w LaserJet) for a year now. Sometimes its been very well, other times as recently happened constantly offline. Its driving me crazy.

  I just read online that can help to restart the router and the last two times, my printer went offline, restart the router has healed (power cycling of the printer, by running a utility that stops & starts the spooler - did any of these things).

  So my question is - why reboot the router to fix this? Both times I was surfing online with this same router, and I have not noticed any problem with this router. And secondly, is there a setting that I can change into my router so that it will not goof the printer wireless?

  
  HP LaserJet p1102w

  OK, I'm about ideas.  I suggest check the firmware, there is a version 20150114 which was released end of March 2015 available here.

  It can also help to go through all the steps described in the paper here.

  If none of these solves the problem I will ask one of the HP support officers rush in this thread, they may have some additional suggestions.

• Problem with the HP Laserjet p1102w printer

  Hello

  I have the problem that my printer HP LaserJet p1102w (wireless) still print on the same page, no matter what I send to print. Curretly I can't print at all because every time when I turn on the printer starts infinitely print the same page...  I tried to reinstall the drivers, but it did not help.

  How can I solve this problem? Can I do hard reset somehow?

  Thanks in advance for any help with this problem!

  You don't mention whether or not you have recently installed your printer on a network, but this is a HP document that answers your question, once the product is installed on a network of troubleshooting.  Please let me know if it helps.

  Product print permanently the same print job

  Tobindo

  A representative from HP

• HP Laserjet P1102W wireless connection problem

  I have a P1102W which worked very well up to what it wasn't wireless.  I use an AT & T Uverse 2Wire router and Windows Vista.  I have not changed anything, and one day the network would not recognize the wireless printer.  I've turned off (unplugged) everything and turned on the back without success. I uninstalled and tried to reinstall the printer and have just received a message that the network could not connect to the printer.  The printer works when it is connected with a cable, but the blue wireless light just blinks and then turns off - indicating that there are no wireless signal.  All other devices and wireless printers on this network work very well.  HP support was no help, because the warranty had expired 2 DAYS ago!  Any help would be greatly appreciated!

  Hi kadmiral,

  Follow the steps below.

  1 uninstall the printer to the computer using Add/Remove programs in the control panel.

  2. download the software and the driver for your operating system from the link below.

  HP LaserJet Pro P1102w printer drivers

  3. follow step 3: connect to the wireless network - second method: Standard connecting with a USB cable

  If your wireless router does not support Router Setup (WPS), you can use this method to set up the product on a wireless network. With the help of a cable USB to transfer parameters facilitates establishing a Wi - Fi connection. Once the installation is complete, remove the USB cable.

• Problem HP P1102w Wifi on Mac

  Running a Mac w / Snow Leopard

  Followed all the installation procedures.  I have manually setup my router name and password and the info is recorded and accepted.  Problem is, when I go out the USB cord, he doesn't speak.  USB is plugged, all right, of course.

  Any help would be appreciated.

  Got it to work. I saw just the HTML Config to my MacBook Pro, which has OSX 10.6. It was the missing piece to get WiFi working on my network and talk to my iMac.

  Thanks for the help.

• P1102w: Problem installing P1102w, PC, printer is on does not recognize, Windows 8

  I have problems to install the printer.  Loads of software and extracted, then when I go to wireless network connection, it says he's expecting me turn on the printer when the printer is turned on and connected to the USB port.  I even changed USB ports.  It is still not let me install.

  Hi @gawright59,

  I see that you have problems of configuration of the printer on the wireless network, the printer is not recognized as the USB connection during installation. I will definitely do my best to help you.

  This can occur when the printer is already recognized as the USB connection and windows does not yet detect.

  The best way to solve this problem is to unplug the USB cable, run uninstall and reinstall the printer software again. Do not connect the USB cable until you are prompted during the installation. Select the wireless installation. (do not install the printer as a USB connection and then run the Wireless Setup Wizard)

  The other way to resolve this issue when you receive the message, is to leave the USB cable connected, remove the printer in the devices window and printers and Device Manager.

  Here are the steps for access to the devices and printers and Device Manager.

  From the desktop, hold down the Windows and X. This will bring up a list, open Control Panel and then devices and printers. Right-click on the printer and on the left, click on uninstall.

  To access the Device Manager:

  Press the windows key and press X on the keyboard at the same time in the office.

  Then click on Device Manager in the list.

  Verify that connections in Device Manager for the entries of the printer, under Bus USB controllers look for a USB print media or anything with an exclamation yellow, storage device or an unknown device. Right click and uninstall the device.

  Then reconnect the USB cable and it must be detectable again.

  Feel free to click on the "Thumbs up" button below if it helps.

  If there is anything else I can help you, let me know. Thank you.

• Problem with installing Laserjet P1102W - Ad-Hoc - can't change mode of Communication of Ad Hoc

  I have a printer HP Laserjet P-1102W which was installed in Ad - Hoc mode for a short time.  The unit can, however, connect via USB and works very well in this mode, but I want to use it as a Wifi unit with my router and the APs. The unit has a 20130703 firmware datecode. I need to reset the mode of communication out of the "Ad Hoc" mode.

  With the printer is NOT connected through the USB port and holding down the 'X' button to print the "Self Test / Configuration of the device"sheet shows that the status = not connected. " The MAC address displays address 12 characters, the IP address is 0.0.0.0, as is the subnet mask and the gateway. The "IP configured by Hand with the server DHCP/BOOTP = 0.0.0.0 =. The 802.1 b / g Wireless Status = Enabled and the Communication mode = Ad Hoc, SSID = HP4FA96D with authentication = None (open).

  I tried to reset the unit by pressing down the wireless and 'X' buttons located on the top of the machine, but this action does not change the mode of further Ad Hoc communication. I looked through the USB print driver in Windows 7 Pro, but can find no access to wireless settings, and as the camera doesn't have an IP address, I can't access the built in web server.

  Any suggestions on how to completely reset the unit so the Mode of Communication is NOT "Ad Hoc"?

  Concerning

  IT IS FIXED - READ BELOW:

  After trying the patches recommended by other users, download the latest firmware, the driver more current and also help in the HPPSdr.exe of the HP program, making a unit restart by pressing both buttons when the device has been propelled to the top (this is only a partial and not completely reset reset) the unit would not clear the AD - Hoc mode and return to the wireless infrastructure mode.

  The last step, I tried (without the help of HP or the community) was to find the original disc of 2009 and first install it like a USB connected printer. If successful, then a second set with USB cable attached as a wireless printer. It helped me finally change the settings DHCP wireless, assuming, SSID, etc.. Once completed, and unplugged the USB cable, the printer now works as a printer wireless assuming with my router and access points.

  We have NOT ALLEGED on HP support pages for this printer trying to use older software install the disc and make a several step installation - shame on HP!

  The community of HP came with some good ideas, suggestions did not fix of unfortuantely this problem. The printer is out of warranty, so HP Corp. would NOT  provide any help (by e-mail or otherwise) unless I used either the HP community or pay them $24.95 for once call phone support. It seemed stupid to pay 25% of the new value of the printer four years ago.

  Given this bad experience with the lack of support for current HP products which exceeded their warranty period, I can't recommend HP products to my clients or friends. Shame on HP for this contempt for their customers!

  Peter

• LaserJet P1102w: Problem setting Wi - Fi for p1102w

  I am trying to install a new printer.

  When the software asks you to connect to the printer via a USB cable I have plug, make sure that the printer is on, but there is no answer. I get the messdage "Waiting for you connect the device" (or words to that effect).

  I use the USB port, works with other devices.

  In a troubleshooting program (HP) he asked me to print a page of test via the USB cable and that worked. Same USB port.

  I am at a loss.

  Thanks for the reply.

  In the end, I discovered the problem, which is close to that you have solved. One then I reinstalled the drivers. Following the instructions and connect the usb cable, rather than have already plugged into the printer and then plug it into the laptop, I reversed the order and plugged the USB into the laptop first then on order in the printer. He has worked smoothly since then.

  If Noah the printer is ready to the top. I even used my Smartphone.

• HP P1102W problems

  The printer works fine up until recently.

  It seems to work, and then all of a sudden a document stuck in queue and get stopped all the following conditions.

  Sometimes the stuck document even prints but remains in the queue.

  I have to restart the printer and cancel all documents to make it work again, and then it works either with some documents until it crashes or only one.

  I downloaded the latest version of the software/drivers and reinstalled, but to no avail.

  Any suggestions?

  I had problems with a USB connection. When I went back fi it worked fine again.

  Maybe on my USB port went bad.

  He was a customer. Personally, I use a Canon at home. May or may not be as effective with ink, but it is very reliable.