Problem installing LifeCam VX-5500

Similar Questions

• Problem installing LifeCam VX-2000

  A few months ago, my roommate bought a Webcam LifeCam VX-2000, he used it to Skype and msn, and I wanted to use it as well, so I installed the cd on my laptop and started using it too. now my friend left and he took the webcam as well, and so I went out and bought the same webcam.  and then I tried to install the cd but an error came 'the installation cannot continue because an unexpected error has occurred. http://support.Microsoft.com/kb/953691. So I go to this site and it tells me to uninstall the old version and then reinstall it from current CD. so when I go into Add/Remove programs I find the program I'm trying to uninstall and then another error message appears "windows service install could not be accessed. This can happen if windows install is not properly installed. »

  What the hell to do! I'm stuck!

  P.s. I have Windows Vista and Dell Inspiron 1525

  Hello

  I suggest that you follow these steps and check to see if they help.

  Step 1:

  Start the Windows Installer service

  a. Click Start, type Services.msc and press {ENTER}
  b. double-click Windows Installer
  c. the value of the Windows Installer Manual startup type
  d. Click Start to start the service. Note the error message, if any.
  e. click OK.

  Step 2:

  a. plug in and let the installation process fails.

  b. go to your control panel-> computer-> Device Manager and find the device

  c. right-click on the device and choose Update driver software

  d. When demand choose Browse my computer for driver software.

  e. Locate the CD-ROM drive under \Life Cam\Setup\Files\Driver64\VX2000

  f. click Next and continue through the driver installation process.

  g. once the installation is finished, tried to reinstall the Software Life Cam, check if allows it.

• Failed to install LifeCam HD-3000

  Hello

  I can't install Lifecam HD 3000 on a Win XP PC with all of the updates in the order.
  An error message appears during installation says it failed without and reason and gave the following link: http://support.microsoft.com/kb/953691

  I have gone through all the steps on this link, but does not help.

  I checked the people who have had the same problem, but no help, links below I checked

  • https://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/9b07dba1-2b28-47bd-9423-e4db4b8b5a6f
  • http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/LifeCam-HD-5000-driver-and-software-installation/08e7300e-C32D-4595-9799-deb3016a8041
  • https://www.Microsoft.com/hardware/LifeCam/en-us/default.mspx
  • http://support.Microsoft.com/kb/973297
  • http://support.Microsoft.com/kb/953691

  I also tried mode of fail-safe with network enabled, logged as administrator, but with the same defect.

  Why can't download us manually the installation complete SW?
  (SW 'LifeCam3.60.exe' can be downloaded from

  • https://www.Microsoft.com/hardware/en-us/d/LifeCam-HD-3000

  is not a complete package of SW, it comes in contact with MS and download more things and that is what crashes, we can see the connection in a firewall schedule downloads about 5 MB, which is of ~ 10% of the progress bar up to what it fails, then obviously, the whole package, he wants DL exceeds > 50 MB)

  Please if possible give me a link for the complete SW a manual download, or where to find a generic webcam SW, if it is not please give some advice how to do this, thanks in advance.

  Hi I solved it, please read because it might help you too!

  When I opened this thread I tried for 4 hours to solve this problem * and apparently a lot of people have problems with the installation procedure.

  When I installed the program, I noticed at the beginning in a small window that shows progress, he showed a folder he had created and had a random name composed of letters and numbers such as: 56eb37a890142, go and find him!

  In this case, it creates subfolders where the subfolder has the name «windowsinstaller»

  • Drive:\56eb37a890142\windowsinstaller\x86\windowsxp-KB942288-v3-x86.exe

  (Your path may be different, but the mine was created on a different driver/partition that my Windows driver.)

  During installation, I was going through all the steps (in fact I just leave the installation in the middle of the process, as it is, if I remember there are 3 steps, first unpacking, the other 2 steps is displayed in a new window, and I don't remember now I did the 2nd step, however, this is the 3rd step that fails but in this hack you do not go there)
  ... instead, once the 56eb37a890142 folder was created, I went in the subfolder and installed the

  • WindowsXP-kb942288-v3 - x 86 .exe

  Once this file has been installed, Windows automatically forced the closure of programs and handed over in market, after reboot, I returned to the

  random 56eb37a890142 of the folder and double-click the following file

  • Setup.exe

  All of a sudden the installation went through, obviously something is wrong with the installation program, I think it not to apply the update of windowsxp-kb942288-v3 - x 86 .exe, or somehow fail to do.

  One last thing on the randomness of the '56eb37a890142' folder, I have a low memory, if the installation failed, the folder would be removed, so we might have to make a copy of it.

  Edit: I checked the Windows Installer "windowsxp-kb942288-v3 - x 86 .exe '.

  It's a "Windows Installer 4.5 Redistributable", it can be downloaded separately from the link here below, we could try this instead of the procedure described above:

  • https://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=8483

• Cannot install lifecam hd-3000 on my old toshiba laptop windows xp, I have no configuration required

  my computer - toshiba 2004 (old) Windows xp cannot install lifecam hd-3000

  Hello

  How you are trying to install LifeCcam on your computer?

  Make sure that the computer you are using meets or exceeds the minimum video, processor and memory to install and run LifeCam.

  Open the DirectX Diagnostic tool. To do this, follow these steps.

  (a) click Start, click run, type dxdiag in the Open box, and then click OK.

  b) on the System tab, note the processor and memory values listed under System Information.

  (c) on the view tab, note the value of approx. total memory is listed under the device. Most LifeCams require at least 2 MB of video memory.

  (d) click exit to exit the DirectX Diagnostic tool.

  Compare the values that you noted in the minimum system requirements that are required for LifeCam. You can find the system requirements for each LifeCam on the Microsoft Hardware Web site. Click on the product of LifeCam you have installed, and then click the Details tab to review the system requirements.

  To compare the system requirements for your LifeCam product, please visit the following Microsoft hardware Web site:

  http://www.Microsoft.com/hardware/digitalcommunication/ProductList.aspx?type=LifeCam

  Note: If the computer does not meet the minimum system requirements, contact the computer manufacturer for more information about how to obtain the updates and upgrades.

  For further information, you can consult these articles.

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

   

  Troubleshoot failures to find the new LifeCam hardware

   

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

• Cannot install LifeCam Cinema "Setup can not continue" error on Windows Vista

  Original title: I can not install Lifecam cinema on Vista Business.  Installation dies and points to kb/935961.  I followed all the recommendations in there and still no luck. Help!

  LifeCam Cinema just bought.  I have tried to install from DVD (version 3.5 installation) as well as downloaded 3.6 install from the Microsoft Web site.  Installation starts, but then fails with an error indicating that the installer cannot continue, look at support.microsoft.com/kb/935961.   I went through all the methods in this kb, nothing helps.   I'm on vista Business, SP2 and have kept with Windows updates.   I tried the end of update/install .net framework 4.0 and that did not help either.   I have NOT yet attempted to plug the camera into the USB slot at this point.

  Help!

  Hello

  1. What is the brand and model of the computer?

  2. What is the security software installed on the computer?

  3. have you made changes on the computer recently?

  4. are you able to install other programs and applications?

  5. What are the steps you tried?

  6. What is the exact error message when installation fails?

  Method 1.

  I also suggest you run the fix it tool for the link.

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2.

  Resolve the error "Setup cannot continue" when you install the LifeCam software

  http://support.Microsoft.com/kb/973297

   

  Note:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you need to disable temporarily to install other software, you must activate it as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Let me know if it worked.

• Problem installing device a1530n

  Running Win XP Media Center Edition.  Had minor graphical problems at the top of the IE bar periodically endangered.  Decided to remove the Intel (r) 82945G Express Chipset adapter in Device Manager and then do a scan for new hardware.  And now I get the message of the new hardware detected that says.

  Cannot install this hardware

  There was a problem installing this hardware:

  Intel (r) 82945G Express Chipset Family

  An error occurred during the installation of the device

  Access is denied.

  I am connected to the computer as an administrator.  I tried to install this even in safe mode and get the same error above.  Any clues on what do I do?  The computer runs only in VGA mode.

  Thanks in advance.

  Link to screen shot of the error message.

• Satellite P300-133 - problem installing Win Xp

  Hello

  I have a problem installing win xp to Satellite p300-133.
  To resolve this problem, I have tried the solutions:
  switch to ahci mode in bios and incorporating storage drivers compatibility intel to the installation cd xp with nlite, but none of them solved the problem.

  Laptop computer starts from the cd of xp and xp installation says "program Setup inspects your hardware configuration" and then a blank black screen comes.
  After that, the installation does nothing and waits indefinitely.

  Any ideas on this problem? Thank you.

  Hello

  > switch to compatibility ahci mode in the bios and the integration of the storage drivers Intel to xp with nlite installation cd, but none of them solved the problem.

  The two methods are good!
  You can install the Win XP without drivers Intel Storage Manager (SATA drivers) but in this case the SATA mode must be on compatible mode.
  It works for sure!

  The second method is the installation of the SATA drivers with nLite (drivers can be integrated into the new drive Win XP).

  I put t understand why this doesn t work on your laptop. I think it's a problem with your Win XP drive. Contains this Win XP SP2 or SP3?
  If this isn't the case, then you should use nLite to include min the Win XP SP2.

  Check it!

• Problem installing PCI-6220

  Hello

  I have problems installing a PCI-6220. The card has been installed a couple of years on a PC and rarely used. I withdrew from the it and connected to a new PC (Intel core i3 2.93 GHz, Windows7). After installing the card on the new PC in a first time, I could read the name of PCI6220 under 'Devices and interfaces' (in the program MAX) but I´d not been able to define it as a device. So I tried to remove the card and plug it in again and now the situation is even worse, I only see an "unidentified PXI system" in the program of MAX.

  Any idea what bad and what can do to make sure that the card does not work properly? As a reference, I need to connect to a CA-1000 enclosure housing a CB-68LPR device.

  Thanks in advance,

  G.

  Install the latest (9.3) DAQmx-drivers for your PCI, which could help.

  http://Joule.NI.com/nidu/CDs/view/p/ID/2337

• Problem installing LAN USB adapter in a new copy of windows 2000

  After having reformatted my hard drive and install a new copy of window 2000, I'm having a problem installing device drivers.  When I enter the correct inf file path, it reports that this window has not found a driver for the device.  Whithout the possibility to connect to internet, I have exhausted all my options and still need to install several other drivers with the same problem.  help help help help

  Everything you try to use (you do not give the brand / model of the LAN USB adapter) made drivers for Windows 2000?

• Problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription) "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security /...

  Original title: problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription)

  Try installing Webroot to MSN but when I run the installer, I get "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security/current/plugins/antimalware/Backup ". OS is XP with Service Pack 3. I tried to delete my existing Webroot program and turning to the bottom/off other security options... Any suggestions? Thank you.

  Thanks for the reply. I was able to finally get the new Webroot program to install after running a Microsoft Fix affecting the directory uninstall the old prgm Webroot and meets a new error code (1603), which led me to this site to permissions Grant full control to the SYSTEM account.

  http://support.Microsoft.com/kb/834484

• IPod Classic 7 G 160 GB ' there was a problem installing this hardware: Apple iPod USB Device ".

  I have recently (June 2014) bought a brand new Ipod Classic 7 G 160 GB Model A1238.

  Whenever I connect via USB to a PC running XP SP3 and Itunes V10.0.7.2 it is always treated as if it were a new connection, i.e. "new hardware found". After trying to install it, it says so "cannot install this hardware" and "there was a problem installing this hardware: Apple iPod USB Device."
  I have also a 2009 16 GB Ipod Nano 4 G model 1285 and this is recognized by the PC whenever it is connected through the USB port itself.
  I connected the Ipod Classic 7 G to a laptop running Vista and Itunes V10.0.7.2 where the Ipod is recognized and installed.

  Even if the PC States that there is a problem installing the Ipod, it still appears in Itunes and I can download music to it and disconnect by using safe mode disconnect.

  PC XP SP3 - Ipod Classic
  I watched "Device Manager" under "Drives", the Ipod Classic is listed as an "Apple Ipod USB Device", but has an exclanation score against it.

  Right-click on the 'Apple Ipod USB Device' properties and the "Volumes" tab it shows the drive with the exact name and the size of the data, by clicking on the properties of "Driver" tab it says 'Unknown' driver provider, driver Date and Driver Version as being "not available". By clicking on the "Driver Details" properties, it shows a driver file-

  C:\WINDOWS\system32\drivers\PartMgr.sys, File Version 5.1.2600.5512 (xpsp080413-2108).

  Under "Device Manager" USB controllers, there is an entry for "Apple Mobile Devices USB Driver" and a "USb Mass Storage Device"

  The 'Apple Mobile Devices USB Driver' lists two drivers:
  C:\WINDOWS\System32\Drivers\usbaapl.sys and
  C:\WINDOWS\System32\usbaaplrc.sys

  The "USB Mass Storage Device" list a driver:
  C:\WINDOWS\System32\Drivers\USBSTOR. SYS

  PC XP SP3 - Ipod Nano

  I repeated the steps above with the Ipod Nano, connected to the PC and the driver provider is presented as Microsoft with the driver as 07/01/01 Date and Version of the driver as 5.1.2535.0.
  In the "Driver Details" properties, it shows TWO driver files:

  C:\WINDOWS\system32\DRIVERS\disk.sys AND meanings
  C:\WINDOWS\system32\drivers\PartMgr.sys.
  At the same time with the Version of the file 5.1.2600.5512 (xpsp080413-2108).

  The 'Apple Mobile Devices USB Driver' and "USB Mass Storage Device" are the same as for the Ipod Classic.

  I followed the procedure to remove Itunes and even the update to Itunes to V11.2.2 nothing works.

  I am aware that the system is also that XP can now be updated.

  So, why not not Windows Installer Ipod Classic and why the disk.sys driver does not appear

  According to the details of the pilot?

  Is the 7 G Ipod Classic not compatible with XP SP3?

  Yes it is compatible with XP SP3.

  Try asking in the forums of Apple iPod:

  https://discussions.Apple.com/community/iPod/ipod_classic?CategoryID=204

• Problem installing disktop 800 wireless drivers for windows xp

  Problem installing disktop 800 wireless drivers for windows xp

  Hi Samir,

  I see that you are unable to install the drivers disktop 800 wireless. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4. What is the error you get when trying to install the driver?

  Please provide us with more information to continue troubleshooting as a result.

  See the link on how to ask questions or help on the Forums.

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

  Refer.

  Wireless and wired network problems: http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• When you try to install the HP Laserjet 1300 printer error there is a problem installing this hardware.

  Original title: HP Laserjet 1300 Windows XP, SP3 error installation

  When you try to install the HP Laserjet 1300 printer, I get the following error message and the process stops and restores.

  CANNOT INSTALL THIS HARDWARE

  There was a problem installing this hardware

  HP Laserjet 1300 PCL 6

  An error occurred during the installation of the device.

  The specified Module could not be found.

  I have used the original printer installation cd, bought a new cd from HP and downloaded the drivers directly from the HP Web site and I get the same error.  The record show error install printer on each attempt of events. Can anyone help?  Thank you

  Hello

  You are able to install other programs?

   

  Method 1: See the following article:

   

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02073861&LC=en&cc=us&product=3795406

   

  Method 2: view the following steps and see if that helps.

  (a) disconnect the printer

  (b) uninstall the software and drivers on the computer

  (c) plug the printer back

  (d) allow the Hardware Wizard search for drivers

  e) if it does not, it asks you to install the source for the drivers, the installation driver CD and install the drivers and see if that helps.

• Problem installing KB2728973 ' Unathorized digital certificates could allow spoofing "which was released 10JULY2012

  Has anyone had a problem installing KB2728973 ' Unathorized digital certificates could allow spoofing "which was released 10JULY2012?  I could not this patch to run after double-clicking on it.  This was true for XP SP3 and Server 2003 SP2.  Your comments are appreciated.  By-the-way, I met all three requirements that are suggested in the section "Known issues" section of Microsoft.

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  ===========

  It is a forum for specific consumers. You will find the Windows Server support in these forums: http://social.technet.microsoft.com/Forums/en/category/windowsserver

• Problem installing HP Deskjet F2280 and Windows7

  Hi people,
  I have a problem installing my printer hp deskjet F2280 all-in-one printer. Its saying its compatible on the windows 7 and custom allow to be the command "run under...". ».  This printer is only 6 months old :(
  Anyone got around this problem yet?

  Thank you

  Hello SeaCos,

  Thank you for using the Microsoft Windows Vista Forums.

  If notifies you that it is not compatible with Windows 7, you need to contact HP support to see all the drivers compatible. Are you following the steps below to set up your printer? Please let us know status. Thank you!

  http://www.HP.com/SBSO/bussupport.html

  Windows 7 install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Open devices and printers, click the Start button, and then click the start menu, click devices and printers.

  Click Add a printer. In the Add Printer Wizard, click Add a local printer. Choose a printer port page, make sure you use a button existing port and the recommended printer port are selected and then click Next.

  On the installation of the printer driver page, select the model and manufacturer of the printer, and then click Next.

  If your printer is not listed, click Windows Update, and then wait while Windows searches for drivers additional. If none is available and you have the installation CD, click disk, and then navigate to the folder where the printer driver. (For additional guidance, see the printer manual.) Perform the steps in the wizard and then click Finish.