Problem of FPS Max

Similar Questions

• How can I add my FPS Max in tools-FPS?

  I created the code to control my instrument.  I would like to add the ability for the user to select a standalone FPS in the menu of MAX.

  The option of front soft in MAX is a feature of IVI, so you must rewrite it. To make a LabVIEW program is no different than to create an example VI as we see to all pilots of project lifestyle. What kind of code TestStand your driver should? To get the custom procedure I created, only a high level VI had and the rest of the driver functions were not different from a standard driver for LabVIEW.

  I don't know of any way to launch a personalized Max VI.

• Problem of FPS VN7 - 791 G-77WX cooling problem

  Hello

  I have a VN7 - 791-G and I have a problem with it. When I start to play a game, the cooling fans is really strong, it begins to spin at very high speed and FPS is really low while the fans are so strong. For example the 'normal' it the condition works CS 120-130 FPS, fans work but not annoyingly loud and it is time when the fans are really really very strong and in the game, I have 20-30 FPS. I checked the temperatures.

  It is fans are really strong one I have 20-30 FPS

  

  It was then that it actually works as it should

  

  If I change the video games, nothing happens even in GTA V when I have this problem I have 10 to 20 FPS on Ultra setting and low setting too. Cooling Boost tried and did not help. Each driver is the most recent. Each game uses the 860M.

  Just got back my phone service, they said it was a failure of the motherboard, so they replaced.

• Problem with FPS... Acer 5755G

  I have an Acer 5755 G.
  It has 2 GB 630M nvidia graphics.
  I did the setting high-performance graphics in the nvidia Control Panel. Drivers on acer site.
  I get only 20-30 FPS in crysis 2.

  20-25 fps in Dota 2.
  I know that my system can do up to 70 FPS.

  Why is it not happening. > ?? Pls help someone?
  

  Fixed a problem. In fact the heat sink and thermal module was not working. These are the reasons for FPS problems. I set and now the parameters of CRYSIS 2 Gamer do 50-60 fps... DotA 2 30 Fps COnstant.

• Problem with cursor Max for the PLSQL called by OAF Page

  All,

  We developed a custom and Self Service OFA this page page, we call PLSQL package to validate and insert the data into the database tables. It worked well, but when we deployed this form throughout the Organization (meaning more users), we reach the limits of MAX cursor for a session.

  This for allows Manager to update all their coordinated under, so in a session, a Manager may work on more than one employee so reach the limit of MAX cursor.

  Please help on how we can solve this problem, I checked all of the cursors used in the PLSQL package are closed properly.

  Ex PLSQL Call:

  String createRow = null;

  try {}

  OADBTransaction oadbtransaction = (OADBTransaction) pageContext.getApplicationModule (webBean) .getTransaction ();

  java.sql.Connection connection = oadbtransaction.getJdbcConnection ();

  CallableStatement callablestatement = oadbtransaction.createCallableStatement ("start: 1: = xxx_hr_multiple_rates_pkg.is_create_job_row (pc_job_name = >: 2);") end; ", 1);

  callablestatement.setString (2, primaryJob.getText (pageContext));

  callablestatement.registerOutParameter(1,Types.VARCHAR);

  CallableStatement.Execute ();

  createRow = callablestatement.getString (1);

  String [] retVals = am.invokeMethod ("createWFMJob", parameter1) (String []);

  System.out.println("CreateRow:"+CreateRow);

  CallableStatement.Close ();

  }

  catch (Exception e) {}

  e.printStackTrace ();

  pageContext.writeDiagnostics (this, try (), 1);

  }

  Thank you

  A

  Ankit,

  Please attach your PL/SQL code, so that we can have a look that the issue could be in that.

  In addition,

  Why do you call the code inside this test below? What is the link?

  String [] retVals = am.invokeMethod ("createWFMJob", parameter1) (String []);

  Why do you need the code below? Delete this.

  java.sql.Connection connection = oadbtransaction.getJdbcConnection ();

  Move the callablestatement.close ();  outside of try catch.

  See the link, if you need some examples below:

  Advice from the Oracle Johny: OAF: sample code to call the function PL/SQL of OA Framework

  See you soon

  AJ

• problems with calibation MAX 4.5 talk to LabView 8.6.1

  Hello
  I use using Max 4.5 with an NI USB-6259 box. When I calibrate a scale with her, it checks good with to check the calibration.
  When I run LabView 8.6.1 power off. more load more its judgment. but this happens in only a tension, compression is fine.

  Hi, cotton,

  I'm curious, is there another load cell that you can try?  How do you save your configuration of MAX?  Are calibrate you for tension and compression?  Have you tried to use a panel of test at MAX to see if it's just your LabVIEW program giving you bad readings?  In addition, is the program that you run an example program, or that you wrote? Thank you for these answers!

• Problem FPS on Satellite L500D-10R

  Hi, I have a problem with FPS in the game.

  No matter which game, poorly executed, when I play 2-3 min, I have 2-3 FPS for 5 seconds and after that it is once again normal SPF 30-50.
  And so every 2-3 minutes low FPS is back. I think that its core have too high a temperature, but I don't know how to fix it. When I stop my laptop and I clearly fan, all games went good 50 to 60 fps, but only for a day.

  Any1 know how to fix? Or only I can send it to guarantee?

  May be some running background processes active which may be responsible for this? An application of scanning of the HARD drive or something similar? Maybe some update runs in the background.
  Your laptop is laced on the desktop all in game? Are cooling grids free and not blocked somehow?

  Have you tried to disable all unnecessary background processes and move to high performance power plan before starting the game?

• Problems with MAX tasks on different stand-alone

  Hallo!

  I have problems with my MAX-tasks and my V12 Dasylab on different stand-alone.

  I have 3 devices on the first PC.

  OR USB-6009 dev1

  NEITHER USB-6210 dev2

  NEITHER USB-6501 dev3

  Now, I had programmed a file Dasylab which uses the device 2 and device 3. Everythink worked fine. I exported my MAX configuration for unit 2 and unit 3 and imported on the second PC. But that Dasylab was not able to find the right tasks for my program on the second PC, even if MAX everythink that went well. The only solution was to delete all tasks and create them again. But then I tried to open the program stored on my first PC again and I had the same problem, Dasylab was not able to find the right tasks, only solution was to remove the stains and create them again. I tried to reset the configuration of my Dasylab with the "Synchronize with MAX-configuration" option, but it wasn't succsessful. DASYLab gave an errormessage, not mentioning not what exactly is the problem.

  Can anyone help?

  Thank you very much and have a nice day.

  Hilby

  Hallo Hilby,

  I think it can be more that can be solved on the Forum of NOR. I think you should contact your local dealer and ask for help directly.

• MAX problems: Connection and conversion

  We live another problem with NI MAX.  We have Lookout 5.1 and 6.2 on a stand alone and a Virtual Machine, both with the same problem.

  When you attach a database, we select the 4 Citadel, the wizard opens.   By clicking Browse results in closing the window and MAX unresponsive.  If we enter the path manually and click OK the same problem arises.

  No excessive use of resources, no other weird not to mention that MAX being completely useless windows requiring a force close.

  OR MAX 4.5.0f0

  Update: also happens with MAX 4.6 Lookout 6.5 beta. Download logs incoming toftp.  DTS NEITHER MAX recorded 022210.zip

  Mike

  Mike,

  First of all I apologize for bugs in the Citadel 4 support.

  My idea was to use MAX installed with belvedere 6.1 to attach and convert the database. If you install the Lookout 6.1 on a clean machine. At least there's no higher version of installed Lookout.

  And then you must copy the file attached to \National Instruments\MAX\UI Internet\. This release fixes another bug that the option "create/attach Citadel 4 database" is invisible.

  I tried this way and it worked. Here is the link to download Lookout 6.1 if you do not have the CD.

  http://Joule.NI.com/nidu/CDs/view/p/lang/en/ID/509

• Gaming laptop FPS varies greatly

  Hello :)

  I had a problem going on with my FPS varies in games. My laptop is more than capable of getting 100 fps on LOL (low settings and optimized for FPS max). However the issue I'm having is that my FPS tends to change drastically for long periods of time.

  For example, right now, my fps is 30. However, in about 30 minutes (the time is random), my FPS can jump up to 100 images/s and to stay there for 6 hours. It can also happen the other way around (100-> 30). The strange thing is that the variations of FPS are usually diagnosed as overheating but my laptop is sometimes better after extended use which does not question of heating.

  Any help greatly appreciated (very annoying problem)
  Caul

  What model of laptop and operating system are you using?
  Original operating system is preinstalled?

• time (for wsn 9791) in MAX server configuration

  Hello

  I need to set up a time for my gateway WSN9791 server in order to ger readings with timestamp of remote nodes. How can I do?

  I already checked this forum and other sources of information on this issue and has concluded that the time server is configured by using MAX under "Remote Systems > NOR-WSN9791 > System Settings" but I have not found any arrangement for the NTP server there.

  My system configuration is:

  -Windows 7 Professional

  -LabView 2013

  NOR-WSN 2013

  -MAX 5.5.0f0 of worm.

  -a WSN9791 gateway

  -eight knots of WSN3202

  concerning

  Flavio

  Finally, I asked the technicians support of OR who have come to find a solution.

  I report the message that describes the problem.

  ------

  Why can I not set a time for my NOR-WSN-9791 gateway server?

  It is a known problem in NI MAX 5.5 and 5.6 MAX OR. The time server option was not be displayed due to a change in the backend of the system settings page. Workaround to view the setting of the time server was created. The following steps will allow the option of time server OR 5.5 or 5.6 MAX MAX OR

  1. on your development computer, go to C:\Program NIUninstaller Instruments\MAX\UI Providers\DefaultRemoteUixml\ to C:\Program Files (x 86) and 64-bit windows \National Instruments\MAX\UI Providers\DefaultRemoteUixml\ for 32-bit windows.
  2. in the directory C:\Program Files (x 86) of Providers\DefaultRemoteUixml\ \National Instruments\MAX\UI, make a copy of the original mxrmcfg. DDPSystem.def.xml original-mxrmcfg file. DDPSystem.def.xml. this backup the original file to undo the changes.
  3. open in Notepad the file mxrmcfg. DDPSystem.def.xml

  4 replace the contents of the file with the following:

  
  
   
     
     
   
  
  5 restart NI MAX

  After you follow these steps, you will be able to set the time server on the NOR-WSN-9791 via NI MAX.

  ------

• No devices under Max

  Hello again everyone.

  I looked through the other posts and have tried all suggested without a bit of luck. (other that a complete uninstall, re - install)

  I'm forced by my Department to upgrade systems to Windows 7 64-bit and a computer Lenovo ThinkCentre shinny new M series.

  My problem is with MAX v5.0.  I have a PCIe-6351 and a PCI-6052E installed in the system, windows recognizes the card and according to the Device Manager, everything works fine.  The problem is that devices are not appear in MAX under the tree of devices and Interfaces.  I'm refreshing the tree and it is said, it is looking, but he never finds anything.  I used the tools > Reset Configuration option and have nothing done.

  Could there be a security features that are installed that may stop MAX from the voting systems hardware correctly?  Only, I only ask because I was told that some hard enough security practices will be implemented with the new computers, I am about to receive.

  I gained administrative rights and run MAX under an administrator account, but still no luck.

  This is a new installation and I received no errors, everything seemed to install correctly.

  Any ideas how to solve this problem?

  Your help is as always, very much appreciated.

  Steven M.

  Well, my problem is solved. MAX recognizes all my devices and everything works as it should.  The solution is a bit anti-climatic

  The source of the problem was that NEITHER System Web Server (NiApplicationWebServer) service did not, who stopped the mDNS responder service of the race, which, in turn, stopped the service of charger OR to run.

  Try to manually start the MSDN OR system Web Server & National Instruments that service would result in an error 1075, you try to start the device loader neither resulted an error 1068.

  My Department of systems had no ideas on what safety measures or protection of viruses on their end parameters might be the cause of the problem.

  Solution:

  Control Panel > programs > programs and features > National Instruments software > uninstall / change > measure Automation & Explorer > repair.

  After the repair, everything works fine, and all of the above services are running.

  The installation process has shown without errors or problems, so I am at a loss as to why he needed repair.  But whatever it is, problem solved.

  

• MAX: Fehler bei der zur data base connection

  Hallo,

  ICH habe ein problem mit NI MAX. Es scheint die nimxs.exe zu breast beschadigt. Nach dieser Fehlermeldung NI MAX nicht mehr gestartet werden kann. ES geht nicht mehr über die Initialisierung headed. Die Fehlermeldung participations beim der nach dem first Starten nach einer verhindern bzw configuration categories. Repair.

  

  MIT thank wurde

  Vitali Reitenbach

  Hello

  the KB http://digital.ni.com/public.nsf/allkb/86256F0E001DA9FF86256FFD005B827C did not help?

  You can also remove / uninstall the MAX and try a new installation. The installation of MAX program is included in the NOR-DAQmx driver on the oder pilot-DVD you can download:

  http://www.NI.com/nisearch/app/main/p/bot/no/AP/tech/lang/en/PG/1/SN/catnav: from the, n8:3478.41.181.5495, s...

  If removing the MAX is not possible in windows system control, you can try the MSI blast tool!

  I hope this helps

  SUSE

• 6036E DAQ works do not at the same time - OR-MAX-Bug?

  Hi all

  I'm stuck with a strange question with two cards PCMCIA-6036E running on the adapters on a W7 32-bit desktop machine.

  The adapters are two Texas Instruments PCMCIA adapters PCI-slots (show different IRQ in windows device manager).

  But NEITHER MAX (5.6.0f0) doesn't recognize only one card, no matter what I do.

  Only 1 card works in both slots adapter

  Card 2 working alone in both slots adapter

  But as soon as I place the second card in the other slot (any combo of it), it does not appear in the NOT-MAX Device Manager (itshows upward in the windows Device Manager, however).

  I noticed that the serial number of the map displayed on the NOT-MAX preview is not updated tab if I switch cards - although I can see the serial number valid in the tab 'attributes', respectively.

  Name change (Dev1--> Dev2) is not the case.

  I suspect some sort of software problem; may be connected with the same serial number. It seems as if NEITHER-MAX is unaware of the second card, although they (or adaptors) seem to be clearly distinguished by windows. Maybe a problem of updating internal?

  Another symptom: I plug in map 1 and test (work), I also connect card 2 (not recognized) then I remove the card 1 and NOR-MAX always tells me that a card is installed. But the serial number is not updated and tests/self-calibration fails.

  I have not found any mention of such behavior. I now have to work with two separate computers that is terribly boring.

  Any suggestions? This has been filed as a bug, or is there compatibility problems with PCMCIA adapters?

  Thanks for reading!

  Okay, so I got an adapter PCMCIA alternative (different chipset), until the last DAQMX-improved version but no change - it is one or none.

  According to me, it's rather a problem in NI MAX Panel and not driver related - but since there is no real prospect of a solution, I give up.

  I'll mark this issue "resolved", even if it is not in a technical sense. It does not work as I want.

  Thanks for your suggestions!

• SMU 6341 and SCB-68: problem with several entries... * URGENT *.

  Hello

  I have an urgent problem, I would really appreciate help with.

  I have a terminal block (SCB-68) connected to a multifunction data acquisition (6341). There are 4 entries in the Terminal:

  1 sensor laser displacement, coming from a controller as a signal of analog voltage output ("1V" and "0V" on the controller). Connected to AI 0 and GND.

  2. The accelerometer (PKI, coming from a then the voltage signal conditioner) connected to GND AI and AI 10.

  3 load cells (PKI, coming from a then the voltage signal conditioner) connected to AI 11, 12, 13 and 14, each connected to the GND PIN is close.

  Problem:

  By MAX, if I read in 6 channels above my data acquisition (6341), my displacement sensor (#1) and the accelerometer (#2) behave very well. However, among the channels (AI 11 and AI 12) load cell switch in tension, as if they follow the movement sensor voltage (#1). For example, there is usually a mV - 800 in AI 11 voltage change.

  This problem disappears when I'm not reading travel (HAVE 0, #1) laser. that is as soon as I remove this channel of my task, the readings of cell and accelerometer support back to normal (base voltage ~ 0V). Yet once if I ask again the laser channel, I see a vertical movement in the readings of load cell 2 (displacement varies with the current tension HAVE 0).

  Attempts of fixation:

  -tried to change the differential using AI laser sensor 0 and AI 9

  -tried to delete the field of laser 120V Power

  Any ideas at all would be greatly appreciated!

  SCB-68:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/1180

  SMU-6341:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/207415

  This is the general idea.  If you must use high impedance sources and that you have enough channels available, placing a channel of the grounding of entry between each other usually helps.  You must analyze these chains grounded.  Just grounded isn't them enough.

  Example: Sensor has = AI0, ground = AI1, sensor B = AI2, ground = AI3, sensor C = AI4, AI5 = ground.  Read AI0:5.

  Lynn