Problems installing upgrade pilot Photosmart 5510d

Similar Questions

• problem installing WiFi pilot

  
  

  Thanks ss-007. It would certainly be a driver problem. First you must identify the network device installed in your laptop, there are 10 possibilities for that make of the laptop as evidenced by the selection of the driver here: HP Pavilion dv6-7002tu Entertainment Notebook PC Drivers

  You may be able to restore the original network drivers using this method: use of the Recovery Manager to restore the software and drivers (Windows 7)

  Also make sure you have the latest version of the BIOS: updated the BIOS
  Here's the latest version for your laptop: HP Notebook System BIOS Update (Intel processors) Version F.29

  Let me know how this turns out.

• Problems installing driver HP Photosmart Premium eAll-in-one C310A with LocalSystem registry key

  It is to recommend her file HP for my printer driver based on my scan HP network printer.  There is no sent CD when I bought the printer, that the instructions to download the drivers.

  PS_AIO_05_C309a_Net_Full_Win_enu_140_047.exe

  When reinstalling on my HP laptop with Windows 7, I keep getting the below error.  I have disabled Norton, update Flash, don't know what else to do.  It is not a question of access, because I am the admin for this computer.  Too many hours of research on this issue.  I need help!

  You have administrator access to your windows user account? A suggestion to the user Zaffiri in the next thread that you can try:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/Photostmart-C4400-problem-enum/TD-p/88...

  Just hang on, someone more familiar with the printer can happen.

  Thank you!

  Harry

  Norton support

• problems installing software hp photosmart c5180

  Hello my c5180 and my 64-bit windows 7 will not match

  It wil not install more software hp for printing / scan / copy.

  who can give an idea, s/help

  its starts with fr installation a few minutes later, gone is the installation screen.

  and nothing happens?

  I tried:

  AIO_CDA_Net_Full_Win_WW_130_140

  Thank you

  Hello jvdl,

  Welcome to the Forums!

  I saw your post on the questions you have install your Photosmart C5180 on your Windows 7 computer. I understand the installation will start, and then stop and disappear.

  I would suggest after each step from the document below to hopefully help you to install the software.

  On the Software Installation progress bar stops or crashes

  I hope this helps you!

  Good luck

• I have problem install photoshop5.5 and 6.0 software upgraded. The software, check error error message a future version of photoshop or ImageReady qualification has not been detected.   Please try again or cancel the installation if you have valid c

  I have problem install photoshop5.5 and 6.0 software upgraded. The software, future error message

  Error checking version of photoshop or ImageReady qualification has not been detected.   Please try again or cancel the installation if you have a valid copy of photoshop or ImReady that was detected.   Please call Adobe Customer Service.    . Someone help me please

  Phillip winter

  If I'm just remember, you need to enter your serial number of photoshop 5.5 when you install the upgrade photoshop version 6.

  The number that is on the upgrade to photoshop registration card 6 does not work for the installation of an update to photoshop version 6.

• Problems installing Trust TB-4200 (tb 1200 v2) graphic tablet drivers on win 7 ultimate x 32

  Hi, I have just upgraded to Windows 7 ultimate edition x 32 and have tried to install my tablet, Trust TB 4200 graphics for use in graphics programs.

  I ran windows update, removed all the old drivers for the Tablet, downloaded the new windows 7 x 32 driver from the manufacturers website and installed it according to their instructions.

  However, after re-booting and plug my tablet, Windows 7 incorrectly states the 4200 TB as "tablet" and installs a new driver TECHNOLOGY and several pilots "HID compatible device" instead of using the Trust TB-4200 driver (tb 1200 v2) I just installed.

  It would not be a problem if not for the fact that I need be able to use the sensitivity of pressure that are not supported by the drivers win 7 seems determined to use.

  I know the correct driver installed somewhere because when I turn on the pc with the Tablet attached to the Tablet Manager takes over, however there is no pressure sensitivity and check in the Panel shows me that the device uses the TECHNOLOGY driver.

  I contacted the Helpdesk of confidence, but so far, they have not been very helpful. Is there a way you might be able to help me with this problem on the Windows of the things end?

  Thanks for your time - harold harcourt.

  Thanks for your reply Gokul.

  I tried method 1.

  I removed the drivers manually via the control panel and ran msicuu2 then restarted and tried a clean install as an administrator.

  This time windows installed a pilot of the generic usb interface instead of the driver of tablet pen TECHNOLOGY. He brought back the pressure sensitivity options in the trust tablet Manager, unfortunately resulted in the pen with 2 pointers moving at different speeds and crashed in windows Explorer.

  I uninstalled the drivers and tried again, the second attempt brought the TECHNOLOGY drivers, but the pressure sensitivity disappeared again.

  Method 2 does not work as the Tablet displays only as "tablet" in the Device Manager and when I search or browse my system for the drivers, nothing presents itself (I think it has something to do with all of the installation files of the trust in .exe files with no way to get directly to pilots that they content).

  I got an answer of confidence this morning and they said that the TECHNOLOGY drivers are the right drivers for the chipset of the Tablet and I am currently waiting to hear if pressure sensitivity was withdrawn from their intentionally or if something has gone wrong.

  I'll post an update here when I find it to be.

  Thanks again - harold harcourt

• Installation scanner/printer HP Photosmart 5510d series has no driver available for Windows 7

  I have a new HP photosmart 5510d scanner/printer (wireless). I installed it via the CD, but cannot send anything from the PC to the printer. Nor the radio available, I have it on my devices, but it is said that he needs help desk, when I do this it tells me that I need a driver, when I check for a driver, told me that there is not one for the 5510d. I can scan/printing without PC but hold the hooked up wireless and PC. What can I do?

  Hello

  I'm sorry to hear that the problem with the installation of HP printer driver. It seems to be a compatibility issue with Windows 7.

  Let us try the following methods; I'm sure this will help you to solve the problem.

  Method 1:

  Try the steps in the following Microsoft article.

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  Try to uninstall then reinstall the printer drivers.

  Find and install printer drivers in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Method 3:

  Try installing the printer in Windows Vista compatibility mode driver

  Make older programs run in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  For more information, see the following Microsoft support article.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Please reply with the status of the issue, so that we can better help you.

• Satellite A300D-17F - problem with upgrading RAM

  Hi all.

  First sorry for my bad English. So the problem is my laptop has 4GB (2x2gb). I buy 1x4Go and I want to run with 6 GB. When I install my laptop (1x2Go/1x4Go) run in the bios write 6144 mb.

  But wen the bsod from windows... beginning some time the gel on the Welcome to windows and bsod screen.
  I tried evrerything run with 6 GB no success (once and show me the material 802 MB reserved after the next reboot bsod).

  Some time is running in Mode safe and write some use ram with linux Hardware Reserved.Under I have not problems: installed X 6 GB and no problem. A friend tells me that my shared video memory card to do conflict and cannot calculate the ram. Can I DISABLE my shared video card memory.

  The video card is not integrated.
  I'll give you all the information you will need...: «(want to just run this computer with 6 GB of ram... and no bsod...»

  I have test the ram. (NEW Corsair 1x4Go RAM) Memtest
  Don't test everything no problems with the hardware.
  Reinstall the windows (x 64) only.
  Stop the SuperFetch service.
  Install windows patches.
  I don't know what I'm doing more: "(.)"
  If can do disable the video memory?

  * Toshiba A300D-PSAKCE *.

  * ATI HD3650 512 MB *-http://imageshack.us/f/593/adaptermemory.png/

  DDR2-800 DDR2 SDRAM (6-6-6-18 @ 400 MHz) (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz) - and 2 Rams have the same calendar...

  * BIOS WITH 6 GB *-http://imageshack.us/photo/my-images/37/sdc12878y.jpg/

  * PHOENIX BIOS v3.30* - http://www.mediafire.com/?7ashzkqkk94v9ll

  * SOME OF BSOD HERE * - after windows logo or on the windows logo - http://imageshack.us/photo/my-images/43/sdc12873a.jpg/ / http://imageshack.us/photo/my-images/822/sdc12872v.jpg/ http://imageshack.us/photo/my-images/860/sdc12877.jpg/

  I thing if I disable the shared video (hypermemory) will fix the problem but how to disable? Have all of the options for this in the bios.

  Nice story, but the question is: you use the memory modules live compatible?
  In your long announce didn t post part number and manufacturer of your Ram for upgrade.

  Is that compatible RAMs will work perfectly and there is nothing you have to change, especially not some options of memory sharing that don t even exist.

  By the way:
  4 GB of RAM compatible have part number PA3670U-1M4G. Use this RAM and you won't have any problems, especially BSOD. BSOD is clear evidence that there is compatibility problem.

• Satellite L750 - problem installing drivers

  Hello good people of the internet,.

  I have a problem with the installation/updates of drivers on my Satellite L750-1E3, Windows 7-64 bit.

  When I run the installer, he unzips, saying it will launch later, but then the window closes and nothing else happens.

  I read on the same problem one person had here with the series L855 - 10 p but, maybe because I'm a girl, or maybe because I'm not native English, I have not uderstand what to do...

  In fact, I have problem with more things.
  My webcam not working, when I try to launch it I get the error message that says "initialization was wrong, restart your computer or your webcam.
  So I tried reinstalling the driver, but the problem I described above.

  The same installation of driver problem appeared when Tempro told me to update my blu - ray driver (I have download all the drivers for eu.computers.toshiba - Europe.com).

  And the last for about a month, there are problems with the sound on my laptop.

  First of all cracking noise, then it stops working completely and I have to restart the computer.
  Yet once, I tried to reinstall the audio drivers.
  There are two drivers on the site of Toshiba, one of them reinstalled just fine but this one (nvidia, I think) had the same problem the other pilots.

  Someone please tell me what to do, because I'm really desperate to becaoming and I have seriously considered to throw my laptop out the window.

  Thank you

  Hello

  According to specification for laptop, your laptop was supplied with preinstalled Win7 64 bit. If you have a few simpler problems is to put your laptop to factory settings and test features. Recovery image is tested and contains everything right and tested the drivers so everything should be OK.

  Please save all your data and install the original recovery image according to the instructions on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

  Please test the functionality with the settings and post comments.

• HP Photosmart 5510d: series HP photosmart 5510d used to scanning for Mac

  Unable to get HP Photosmart 5510d scanner the computer no more.  I uninstalled it, downloaded a new driver, tried to get going again and again, it does not analyze.

  Hello @Biebs and welcome to the Forums of HP, I hope you enjoy your experience!

  I understand that you are having problems scanning Mac.  I would like to help!

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend you to reinstall HP Photosmart 5510 e - All - in - One printer full feature software and drivers.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• IPod Classic 7 G 160 GB ' there was a problem installing this hardware: Apple iPod USB Device ".

  I have recently (June 2014) bought a brand new Ipod Classic 7 G 160 GB Model A1238.

  Whenever I connect via USB to a PC running XP SP3 and Itunes V10.0.7.2 it is always treated as if it were a new connection, i.e. "new hardware found". After trying to install it, it says so "cannot install this hardware" and "there was a problem installing this hardware: Apple iPod USB Device."
  I have also a 2009 16 GB Ipod Nano 4 G model 1285 and this is recognized by the PC whenever it is connected through the USB port itself.
  I connected the Ipod Classic 7 G to a laptop running Vista and Itunes V10.0.7.2 where the Ipod is recognized and installed.

  Even if the PC States that there is a problem installing the Ipod, it still appears in Itunes and I can download music to it and disconnect by using safe mode disconnect.

  PC XP SP3 - Ipod Classic
  I watched "Device Manager" under "Drives", the Ipod Classic is listed as an "Apple Ipod USB Device", but has an exclanation score against it.

  Right-click on the 'Apple Ipod USB Device' properties and the "Volumes" tab it shows the drive with the exact name and the size of the data, by clicking on the properties of "Driver" tab it says 'Unknown' driver provider, driver Date and Driver Version as being "not available". By clicking on the "Driver Details" properties, it shows a driver file-

  C:\WINDOWS\system32\drivers\PartMgr.sys, File Version 5.1.2600.5512 (xpsp080413-2108).

  Under "Device Manager" USB controllers, there is an entry for "Apple Mobile Devices USB Driver" and a "USb Mass Storage Device"

  The 'Apple Mobile Devices USB Driver' lists two drivers:
  C:\WINDOWS\System32\Drivers\usbaapl.sys and
  C:\WINDOWS\System32\usbaaplrc.sys

  The "USB Mass Storage Device" list a driver:
  C:\WINDOWS\System32\Drivers\USBSTOR. SYS

  PC XP SP3 - Ipod Nano

  I repeated the steps above with the Ipod Nano, connected to the PC and the driver provider is presented as Microsoft with the driver as 07/01/01 Date and Version of the driver as 5.1.2535.0.
  In the "Driver Details" properties, it shows TWO driver files:

  C:\WINDOWS\system32\DRIVERS\disk.sys AND meanings
  C:\WINDOWS\system32\drivers\PartMgr.sys.
  At the same time with the Version of the file 5.1.2600.5512 (xpsp080413-2108).

  The 'Apple Mobile Devices USB Driver' and "USB Mass Storage Device" are the same as for the Ipod Classic.

  I followed the procedure to remove Itunes and even the update to Itunes to V11.2.2 nothing works.

  I am aware that the system is also that XP can now be updated.

  So, why not not Windows Installer Ipod Classic and why the disk.sys driver does not appear

  According to the details of the pilot?

  Is the 7 G Ipod Classic not compatible with XP SP3?

  Yes it is compatible with XP SP3.

  Try asking in the forums of Apple iPod:

  https://discussions.Apple.com/community/iPod/ipod_classic?CategoryID=204

• Print Spooler service is not running (could not install printer) hp photosmart wireless with

  Print Spooler service is not running (unable to install printer) hp photosmart with wirelessprint spooler service does not not (impossible to install printer) hp photosmart wireless with

  Hello

  · What is the model number of the computer?

  Try not the link below and check if it helps: you encounter printing problems, display the printer icons and adding printers, the print spooler service does not work correctly and you receive error messages related to printing on a Windows XP computer: http://support.microsoft.com/kb/919750

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close": http://support.microsoft.com/kb/810894

• Problems installing ZTE made map of internet data MTS on Vista

  Hi all

  I had problems installing a basic manufactured ZTE map of MTS internet data on my 32 bit Edition operating system, Windows Vista family. It's a HP Pavilion Desktop PC.
  When I install the data card a pop-up box comes up saying SETUP.exe. Then I run the installation file and it begins to install. Only towards the end it shows installation modem, then a pop with a Cape "Driver Installation" box comes up saying - "FAIL TO INSTALL MODEM. () - 536870389). »
  I spoke with the Multilateral Trading System (sellers of internet data cards), and they said to try the card of internet data on another system. I did and it works on my laptop and my office who has Windows XP. Then, it was clear that there is no problem on the side of MTS. The problem was with my HP Pavilion Desktop that is running on a 32-bit operating system, Windows Vista Home Basic.
  I then called HP customer support and they said to remove any program extra antivirus that I may have. I did but still no help. Again I called HP customer support and they said to take back all my files and perform a system recovery. I do that and then downloaded relevant drivers of drivers.blogspot.com and installed on my computer. After doing all this again I got the same error.
  Customer support HP said that there is no problem with the equipment and that I would need to Microsoft when there may be a problem with the WIndows Vista software. I called Microsoft customer service and they said to type the details of this error on answers.microsoft.com so here I am.
  Can someone help me solve this problem?
  I'd be willing to provide any other necessary information.
  Thank you.
  Concerning
  Jackie.V.H.
  Bangalore
  India

  Hi Jackie.hin,

  Method 1
  I suggest you to install the data card drivers in the clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

  Method 2
  If the steps above fail, then I suggest uninstall you the data card completely drivers by running the fixit and then re - install.

  Diagnose and solve the program installation and uninstallation problems automatically
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Additional information:
  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
  http://support.Microsoft.com/kb/2438651#reso3

• Problem with upgrade of the computer and activate Windows, he stated that "the failure of key you entered is already in use.

  Original title: problem with upgrading the computer and Windows activation

  I have improved my week to loast of computer of an Intel Core 2 Duo to an Intel Core 2 Quad processor.  Now Windows tells me I need to register my product.  When I tried to do, he said that "the failure of key you entered is already in use.  To activate Windows, you will need another product key Windows Vista Home Premium. "How can I get MIcrosoft to realize that I have not installed Windows on multiple computers. I just put my equipment?

  Hi Tkelleyaustin,

  I suggest to check the following items and check if the problem still persists.

   

  Resolve activation problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-activation-problems

   

  Activate Windows on this computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/activate-Windows-on-this-computer

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  I hope this helps.

• Hard drive crash as possible; If I buy Windows 7, I have a problem installing it?

  Startup problem

  I can't start with Vista.  Download the screen saying enter ctrl-alt-delete.  Unable to restore the system, use backup factory or reinstall the OS from the system CD.  But when I checked before the accident, the hard drive worked OK.  Obviously, corrupted.  My question: if I buy Windows 7, I have a problem installing it?

  It's your BIOS configured to boot from the recovery disc?
  How load BIOS and change Boot ... - Notebooks.com
  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)
  Click on drive Options
  Select the disc/s click on Delete
  Click new
  Click on apply
  Click OK
  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.