Similar Questions

• HP Pavilion a6600f desktop PC communicates only with the monitor

  Our bureau a6600f HP Pavilion PC (with OS 64 - bit Windows Vista) has stopped communicating with his monitor.

  The start process seems to work for 7-8 seconds before stopping.  We can hear the fans and CD unit turn during this period.  There is no warning beeps.

  We went from monitors to exclude a monitor problem. Both have two monitors, that we have given to the case put off until the boot process - which may indicate no comments received.

  We tried to reset the BIOS blindly in accordance with the instructions provided for elsewhere in this forum.  We also tried to boot from a CD without success.  Please notify.

  Once the boot sequence was not even initializing, I realized, I discovered the solution.  A simple search online for 'black screen' and 'no boot' leads to results multiple problems related to the integrated NVIDIA gpu chip.

  The chip is apparently subject to overheating to the point where its connective solder may melt and break its link with the motherboard.  This issue mainly comes in laptops because of the sealed enclosure, but it has been reported also occur in models of office such as ours.

  This broken link results in a black screen and an inability to boot into the BIOS.  Several of these instances have been diagnosed wrongly that the motherboards 'failed '.  Fortunately, there's a fix called "reinvest."   It comes down to warm up the chip gpu to the point where his welding redéroule reconnect the loose pins.

  Some repair shops are fully aware of this problem and offer to repair it for about $80 at present.  Some DIY Laptop owners have also posted videos online in order to document how they have reorganized their own chips using a variety of means.

  I decided to take the road of this last, warm our chip NVIDIA gpu with a heat gun using a heat shield to protect surrounding components of the motherboard.  My attempt to reflow works perfectly, so I handed in thermal sinks the gpu with some thermal paste expenses place to finish the job.

  To summarize the question, our desktop HP Pavilion a6600f PC lost communication with his chip gpu NVIDIA Geforce 7100 integrated due to the chip overheat and melt its connective solder.  This broken link compromised the ability of the motherboard to initialize its startup sequence, which gives no output to the screen, resulting in a screen empty.  A new graphics card does not resolve the issue, given that the motherboard was inoperative because of the connective issue with the gpu chip built-in.  Reinvest the gpu chip has solved the problem.

  PROBLEM SOLVED!

• Satellite A500 - problem with the monitor after restoration

  Hello
  I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.

  But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
  ANY IDEAS?

  Thank you

  (I have the disks for the restoration, if that helps.)

  > There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
  If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
  When you enter the BIOS settings you see thise lines too?

  Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.

  What operating system do you use?

• CS6 is compatible with El Capitan.

  Adobe CS6 is compatible with El Capitan 10.11.3?  I have seen a lot of speculation and people hiking off-topic, just need a straight answer. Now, if this isn't, at Apple, why can not download a previous version of the operating system as the Mavericks. Also, please stop Apple made a software buggy with compatibility issues, this used to be the case

  https://forums.Adobe.com/thread/1997244

• I am trying to connect a Macbook Pro with Retina display for a new monitor Dell Ultrasharp 3014. I tried to connect via HDMI and DVI cable supplied with the monitor but the monitor says "no cable dvi - d".

  How to connect a Macbook Pro with the (just bought) Retina display for a Dell Ultrasharp U3014's new? I tried to connect with HDMI and DVI cable supplied with the monitor but the monitor says "no dvi - d" cable. I never tried to do that before so I'm lost.

  Use a mini-displayport cable. Connect to one of the ports Thunderbolt the MacBook Pro to ultra-compact monitor entry.

• Y510P 59405664: Dockingstatin available, even with three monitors?

  Hello

  I am about to replace my desktop and laptop system with the IdeaPad Y510P 59405664 as the two-in-one-solution. So: is there a docking station for this idea which is able to manage the following specifications?

  • mechanical keyboard via PS/2 (not an absolute must, but would be great)
  • mouse via USB
  • audio via RCA
  • three monitors
  • Gigabit ethernet

  I hope that it is possible, even with three monitors. In my current setup of PC desktop, I use three monitors, too. The reason I think that it should be possible is that this IdeaPad has the internal CPU graphics (NVS), who can manage a monitor, and the second dedicated graphics card GT750 that should be able to handle additional monitors. All monitors are monitors FHD (1920 x 1080).

  If there is No docking station available that can handle three monitors, is it possible to work with DisplayPort or something like that? I have not worked with DisplayPort, so I don't know what is possible.

  I appreciate every response that is useful to me :-)

  There is no docking station on the y510p

• Remote Desktop on pc with 2 monitors, programs previously open on the second monitor does not show

  Using remote connection to a system with two monitors

  At work, I have a Windows XP Pro SP3 system with two screens.  Sometimes, I work from home using my PC at home to connect to the network through a VPN and logging remotely and then in my work computer.  When I launch a program that last turned on my secondary screen to work, it is not visible at home because the remote access connection supports only one (primary) view.  The same thing happens with pop-up in applications, for example a search window.  If the last time I used search in Word, I moved the contextual search to the secondary display window, so I can't see the search engine remote access connection using from home.  Some of these pop-up windows have no menu on them to minimize, maximize, move, and close so there is (apparently) no shortcut to open this menu

  If a tab of the window appears in the taskbar at the bottom of the Windows desktop, I can right click on it and a popup menu will appear. I then click on move, then left click of the mouse and start dragging until the window off the screen starts to appear on my primary display.  However some windows have no popups menus when I right click on their tab taskbar so I can't select move.  Others have no tab that appears for them in the taskbar.

  Is it possible to move such a window to my primary remote access connection screen without being able to see it?

  If not, is there a way to move my work computer to screen single operation of the House using to access remote connection so that all windows appear on the main display?

  Thank you!

  Don't know if it will work, but it's worth a try...

  Try a right-click in an open in the tray area and then select the "Cascade Windows" option in the context menu.

  You can also try to move by pressing Alt-space on the keyboard and then the key M. is the equivalent of a "move".  Then use the left or right arrow key to move the window in the view.

  HTH,
  JW

• Error message indicating the problem with the monitor of devices in Windows XP.

  Original title: Device Monitor

  Error message indicating the problem with the monitor of devices in windows xp. How to fix?

  Hello

  1. when exactly you receive this error message?

  2. What is the brand and model of your computer?

  3. What is the exact error message that you receive?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• Cannot set a primary monitor with 2 monitors

  OK, here's the situation. I have two monitors, a 22 "widesceen LED and a 32" LCD screen, I have the smallest monitor connected via DVI and the cotyledon connected via HDMI. Whenever I plug the big one HDMI, he succeeded to the main screen and does not allow me to make the smaller monitor the primary monitor. This is because the primary monitor option is grayed out and I can't check it. So far, I am aware of the vista updates and also up-to-date with the graphics drivers. Any help would be appreciated. Thank you.

  Hi Venom,

  Method 1

  I suggest you to check if the value for both monitors screen resolution are the same. You can try to set the same for both monitors screen resolution and check if it works very well. Access the link below and follow the steps to change the screen resolution.

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Also access the link below to learn more about the use of multiple monitors.

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Method 2

  If the steps above do not help, you may contact the manufacturer of the computer and check with the BIOS to display settings and adjust it accordingly.

  NOTE: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• DELL XPS 8700 compatible with the monitor Samsung Syncmaster 2232 office

  HI - can anyone confirm that the DELL XPS 8700 desktop computer is compatible with the monitor Samsung Syncmaster 2232.

  Already, I have the monitor, but need a new processor unit.

  Thank you...

  Hi yydelilah,

  The monitor has VGA and DVI ports.

  By default, XPS 8700 comes with HDMI and display port.  If the system is configured with a discrete card, and this card has DVI/VGA port, you will be able to connect to this monitor.

• Problems with multiple monitors for critical update Windows 7

  Since the update critical October 1, I can no longer run multiple monitors.

  According to the record, this update made changes at the same time the driver for my AMD Radeon 7470 and Dell monitor 1.1 card, and I've updated the software.

  Devices for work and when I pass cables or remove cables. Yet they are simply not recognized as connected.

  Hello Kent,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted or incorrect display settings.

  I suggest you run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Please also read this article and check.
  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• RDP to machine with multiple monitors, preserve the application position

  Dear community

  I have a Windows 7 Pro machine in my office with 2 monitors. I have my apps positioned on these two monitors.

  Of the House, I use RDP to connect to this computer. My RDP supported a single window, applications appears in this window.

  If I disconnect the RDP session, my desktop computer remains connected. I connect back to the office, and my apps will automatically go to their 'proper' again monitor.

  It's all a great feature, which means that I can't move my apps around again once I am back in the office.

  My colleague has the same configuration, but it has 6 monitors at the office.

  Following the same logic from above, I would expect applications to their selected monitor, but appears not to be the case.

  Does anyone know if there are limits here?

  Kind regards

  Hello

  Thanks for posting your query on the Microsoft Community.

  I understand how it could be frustrating when things don't work as expected and I appreciate your efforts to resolve the issue.

  However, before I would need some information to help you best.

  This computer is on a domain network?

  If Yes, then we have a support forum dedicated to systems on area issues, I suggest you to post your query on Microsoft TechNet forum for this issue. You can get more effective suggestions and adapted by experts familiar with this topic.

  Please visit the link below to find a community that will support what ask you:

  Microsoft TechNet

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• 4235 with multiple monitoring Interfaces?

  This is a general question as to whether anyone is running on 4.0 4235 sensor code with multiple monitoring interfaces?

  Basically, I wonder if you have any comments on the performance or if you run into any problems with the configuration. I have not seen too much documentation for configuration in fact this, so I wonder if there are additional requirements or considerations.

  Hi Chad,

  With ID 4.0, you can only montior using an interface to sniff. 4.1 you will have taken care of multiple monitoring interfaces.

  As far as performance goes, I don't see any problems and more to ensure that the management station is able to handle the upcoming alarms when using several interfaces.

  Thank you

  Obaid.

• PhotoShop CS6 will work with screen tactile Dell and Windows 10?

  I'm looking to replace my Dell laptop with a 15.6 laptop "series of Inspiron 5000, which has 16 GB RAM 1 TB HD, Intel i7 processor and an AMD Radeon R5 M335 4 GB DDR3 video card.  It is a touch screen with Windows 10.  In talking with Dell technical support, I was told that PhotoShop CS6 FONCTIONNERA NOT with Windows 10 not with the touchscreen even though technology Adobe said it will work with Windows 10 on its "required page.  Dell said that it works with WIndows 7.  I'm confused.  The Adobe forums seem to suggest that Photoshop CS6 will work, so with touch screen and WIndows 10, is there something in the specifications of laptop above Dell that suggests that I'm having a problem?  Will it be buggy?  PhotoShop CS6 will work only with a mouse and not the touch screen?  Is this a problem with the video card? I can't find enough information to feel confident about ordering this Dell laptop forums.  I can go to the 7000 series with a 4 GB NVIDIA® GeForce® GTX 960 M graphics, but I'm not a gamer.

  CS6 works fime on my Dell workstation.

  

• I want to Ctrl-zoom in CS6, Alt-zoom - with the mouse scroll wheel...

  Hello!

  Is there by chance a way to change the entries and outzooming in InDesign CS6 to be with the Ctrl key instead of the Alt key? When you use the mouse to zoom scroll wheel, I mean.

  I used to press Ctrl and scroll the wheel to zoom in and zoom out, and now I'm too old to learn using Alt + key instead, that it is impossible, the tracks in my head to use Ctrl is too deep. Cannot be erased or replaced.

  Or is there maybe a way to make the wheel to zoom in and out without stroking any key?

  James

  No possibility to change the zoom keys. Here's another way to zoom in and out.

  Use Ctrl + space, and then click the mouse to zoom in

  Use Ctrl + Alt + SPACEBAR, and then click the mouse to zoom out