PS6500E and VMWare/ESXi 4.1

Similar Questions

• CUCM 8.6 and VMWare ESXi 5.0 compatibility

  Hello guys.

  I intend to install CUCM 8.6 on VMWare with 5.0 ESXi hypervisor. On the wiki page of cisco on virtualization for UC I found that information on the compatibility with the hypervisor, ESXi 4.0 or 4.1.

  So my question is:

  -Does anyone know about the compatibility between 8.6 CUCM and ESXi 5.0?

  S ' there is no document on installion CUCM 8.6 on ESXi 5.0 you can send me a link?

  Thanks /.

  He did not complete the test again, this is why you don't see it on the DocWiki. You must continue using ESXi 4.1.

• VMware ESXi 4.1.0 and snapshot problem - no disk space

  Hi all

  We now have a big problem with our free space on the disk. We are using VMware vSphere (vSphere Client ver 4.1.0 and VMware ESXi ver 4.1.0):

  Our vm has 2 HDD (500 GB, 1 TB). Now we have only 20 GB of free disk 1 and several snapshot files. To remove the snapshot, we need more than 20 GB of free space (corect?). What we need to do more free space? We can move snapshot files from the first disk to the second disk?

  

  

  Thanks for any help

  concerning

  Dragan

  First of all, you can redirect your new snapshot on another store/disk as explained in this article "http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1002929".

  Secondo, you can delete snapshot older and smaller but not all together as explained in this article by Duncan Epping "http://www.yellow-bricks.com/2008/01/07/delete-all-snapshots/."

  Alex

• Cannot assign a license to VMware ESXi 5.0 hosts

  Dear all,

  I installed vCenter Server 5.0 standard IBM x 3550 M4 and VMware ESXi 5.0 Standard for two M4 IBM 3650 x servers. I can attribute vCenter Server Standard 5 license to vCenter Server 5.0 but I can't affect VMware vSphere 5 Standard licenses for both ESXi 5.0 servers. Each server has 2x6Cores 2.3 GHz CPU (12 cores total). VMware vSphere 5 licenses that we purchase are VMware vSphere 5 Standard for 1 processor (VS5-STD-C) x 12, which is unlimited cores per processor. Can someone tell me what is the problem here and the reason why I still can't assign license to two 5.0 ESXi hosts.

  Rgds,

  Syairus

  If I understand correctly you have 12 licenses for 1 CPU each! In order to assign a license to a host of the CPU, the license capacity must be equal to or greater than the number of the host CPU. You can combine licenses in the portal My VMware.

  BTW. for two host with 2 CPU each, you need only 4 licenses of CPU (not 12), as processors/sockets are allowed, not carrots.

  André

• Just installed vmware ESXi 4.0.0.  Also have Workstation 6.5 I have a few questions here...

  Good day, I am new and vmware esxi virtualization in general...

  I installed the server esxi 4.0. and I want to welcome a few virtual machines on this server. I tried the ViCLient and really like it. But this customer is a 60 day trial and it costs $ 1,000 per license, if I understand correctly...

  I also have the Vmware workstation 6.5 software.

  My main goal for this is to be able to import and export on the esxi virtual machines, create snapshots, export these snapshots, etc... I'm not too familiar with Workstation 6.5 so, but so far, it does the job in terms of export and imprting vms from the ESXi. But I would like to be able to browse the data store, create virtual machines on the esxi without having to create them locally AND export to ESXi...

  I would like to be able to create, manage, copy, create and import/export snapshots, to/from the esxi, but I guess you can't do all this using VmWare Workstation? I would buy the Vsphere CLient, but I'm not one who has a hand on the budget of COMPUTING...

  When you access download ESXi you license number appears near the top of the page. Enter this number in the Configuration tab under license vSphere client.

• VCenter Server first to 5.5.0U3b update and later update of VMware ESXi ESX / will I have problems?

  Hello

  have trouble when I first updated my signature single vCenter Server and later update my vSphere hosts?

  A vCenter Server Version 5.5.0U3b should be able to manage vSphere Host Version 5.5.0 GA, right?

  Kind regards

  Roland

  The vCenter Server 5.5 update 3 b can manage VMware ESXi ESX release GA to 5.5 5.5 update 3 b, take a look: VMware product interoperability Matrices

  BUT, according to the interoperability matrices and vCenter Server 5.5 update 3 release notes, VMware strongly recommends you upgrade your hosts to 5.5 update 3 b, see:

  What's new

  • Update Support for the SSLv3 Protocol is disabled by default
    Note: In your vSphere environment, you must update vCenter Server vCenter Server 5.5 update 3 b before the update to 5.5 ESXi ESXi update 3 b. vCenter Server will not be able to manage 3B ESXi 5.5 update, if you update ESXi before update vCenter Server to version 5.5 update 3 b. For more information about the sequence in which vSphere environments must be updated, see KB 2057795.

  • VMware strongly recommends you update ESXi hosts to ESXi 5.5 update 3 b management of vCenter Server 5.5 updated 3B.

  VMware does not recommend the reactivation of SSLv3 because of the vulnerability of POODLE. If all you must enable SSLv3, you must activate the SSLv3 Protocol for all components. For more information, see

  KO 2139396

  .

  • Resolved issues. This version of vCenter Server 5.5 update 3 b solves the problems that have been documented in the resolved issues section.

• VMware ESXi 5.5 and HP ML310e gen8 v2 lose the license and the password after restart

  I've updated my HP Proliant server with the latest drivers and I have the BIOS version is here: VMware Compatibility Guide: search system

  but after I entered my license in vSphere and adding a virtual machine to the host, where I am restart I lose the license, the password to connect to the host (his game empty) and all virtual machines (I have to add them manually and fix the network, because it is also reset to the default setting).

  Any ideas why is this happing? I'm doing something wrong?

  Other info: I have 2 hard drives put in a logical drive (Raid 1) and VmWare log does not work without saying anything...

  Hello

  is it a stand alone esx host? If yes try asking another key on the wmare site

  hp custom image you used to install the esxi?  If not download the latest version of the hp site or vmware and perform a new installation or level and keep the data store.

  also update the firmware of the hp for the later levels site

• Can the ESXI 5.0 and Vmware View coexist on the same server blade

  Hi team, sorry for the basic question, but can I install the ESXI and Vmware View on the same server?

  Kind regards

  Ismail

  VMware view installs inside a server operating system and he can definitley be installed inside a server running on top of vSphere.

• the vmdk files are compatible with ESXi 4.1 and Vmware server 2.0?

  I would like the two 4.1 ESXi and Vmware server 2.0 use the same vmdk file, of course, not at the same time just to the emergency plan. Is this possible?

  Hi Spitzmann,

  Welcome to the forum.

  Yes, they use the machine material virtual version 7. Take a look at this kb .

  Useful another link .

  Concerning

  Franck

• Best practices in VMWare ESXi 3.5 installation and deployment of VMDK u3?

  Hi all

  I'm about to implement virtualization on my business technology

  I've got these resources to be used by VMWare ESXi 3.5

  Dell PowerEDGE 2950 III

  • 32 GB DDR - II 667 MHz

  • internal 4 x 500 GB SATA 7200 RPM HDD (RAID 5) - I know that it's slow to host the VMDK

  • Internal USB slot on the motherboard (but not USB flashdisk?)

  Dell PowerVault MD3000

  • 10 x 300 GB SAS 15 k RPM

  • 2 x Dual port Gigabit Ethernet NIC (x 4 in total)

  • iSCSI - 2 x Gigabit Ethernet for the switch (mute not to VLAN)

  I wonder where I should install the VMWare ESXi? for the VMDK, I believe that the deployment in the SAN is the right place.

  and any suggestion for the use of the SATA HARD drive internal?

  any comments would be greatly appreciated.

  Thank you.

  You mean Deployment.jpg diagram?

  In this case, there is an error.

  You need a network 2, not 4.

  Each controller and each NIC (on ESX) must have an IP in a net and another IP in the second NET.

  ESX guests 4 targets, 2 in a net, 2 in the other.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Upgrade VMware ESXi 6.0 Update 2 VMware ESXi 6.0

  Hello I am running my PowerEdge T110 II with VMware ESXi 6.0 - Dell customized image. I see that from April 15, 2016 Dell just introduced VMware ESXi 6.0 Update 2 and I'd like to update my system.

  On the download page , I see there is an option to download and the ISO file. I wonder if this installation will completely be wipeout my existing VMware ESXi 6.0 - Dell custom and all the settings and I have to start all over again or update 2 ISO just 'modernize' my network?

  Hello

  You can use it to update without doing a new install. KB.VMware.com/.../Search.do; cmd = displayKC & externalId = 2109711 #Inter

• VMware ESXi monitoring

  Hi all

  does anyone have experience with followed Bigbrother to host VMware ESXi?

  In particular, I am interested monitor consumption of resources (CPU, memory, data warehouses) ESXi hosts.

  I am happy to receive any information about this topic:

  -experience in general

  -scripts

  -Links to the already existing scripts or documentation

  - ....

  Best regards

  Stefan

  Hello Stefan,

  There is an existing extension that accomplishes what you want and it can be found at http://communities.quest.com/docs/DOC-5658 - I have not implemented this myself, but I've heard other users that it works very well. Let us know if this is consistent with what you are looking for, and we would be happy to help you with questions of integration.

  Best,

  John McNelly

  Big Brother Team

• R710/R720 - Dell customized Image of VMware ESXi 5.5 Update 2 - megaraid_sas version specific?

  That I improve a R710 and two v5.5 (Dell image) to v5.5 U2 ESXi ESXi R720 using the image of Dell here:

  www.dell.com/.../DriversDetails

  The documentation "Upgrade Guide to ESXi 5.5 using Dell customized Image" here:

  www.Dell.com/.../manuals

  indicates that a specific version of the megaraid_sas driver must be installed.

  Is the version megaraid_sas that installs with the image of Dell U2 v5.5 not the right version?

  I just ran the upgrade on a R710 and it's the megaraid_sas version installed:

  ~ # vmkload_mod s megaraid_sas | grep Version
  Version: Version 06.803.73.00, build: 1331820, Interface: 9.2 inspired: August 22, 2014

  Thank you.

  Hello

  It lists the R720 and R710 systems supported and both link to the same page, so the customized version is the same for both servers. Is the version listed in the reference guide for A02

  megaraid_sas - 06.803.73.00

  Page 5 ftp://ftp.dell.com/Manuals/all-products/esuprt_software/esuprt_virt_solutions/vmware-esxi-5_Reference%20Guide6_en-us.pdf

  This is the same version that he shows for your installation on the R710 so that seems correct.

• Reference Dell R710, Dell and VMware VAAI MD3200

  Hi guys, we have 3 x Dell R710 hosts running VMware ESXi hypervisor v5.1. Our SAN is via Dell MD3200 Direct attached storage. We have activated the option of High Performance. My question is about VMware VAAI. In particular, the recommendation of VMware: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1033665 it says: "For more information on support VAAI in a particular storage group or required firmware levels, contact the storage array provider." So I'm wondering: is VAAI supported (or not) with the MD3200... and otherwise: should I be deactivation of VAAI settings as recommended by VMware? What are the potential implications for the performance of deactivation of VAAI... or support DO NOT turn it off? Thank you, Steve

  Indeed, you are using a fairly old firmware. The most recent is 07.84.53.60.

  To be able to upgrade to this version, you will need a version quite familiar of the MDSM. I would say to download 4.1.2.29 or later, which is 5.0.0.70. All servers Windows and Linux (not VMware or XenServer) server that manage and/or are connected via iSCSI SAN should have their MDSM, updated software before upgrade you the firmware on the raid on the SAN controller.

  RAID controller firmware: www.dell.com/.../powervault-md3200

  Latest resources DVD (5.0.0.70): www.dell.com/.../powervault-md3200

• Is the PowerEdge R610 Compatible DELL VMware ESXi 5.1 update 1 recovery Image?

  Hi all

  Does anyone know if the R610 is compatible with the recovery Image VMware ESXi 5.1 update 1? It is not on the compatibility list, but the r.620 is there. We use two servers in our VMWare environment and I want to upgrade to 5.1 U1.

  Thanks in advance!

  Lee

  Hi Lee,.

  The long wait has its result.

  Seems that it's a typo. Engineering has responded that it is supported.

  Let me know if you encounter other problems.