QOSMIO F30: UJ-846 replacement is master UJ - 875 (not round)

Similar Questions

• Qosmio F30-112 - drive is not assigned a drive letter

  Hello

  Once again I need your help. My drive UJ 846-C of MODEL Qosmio F30-112 CD/DVD can not read. I brought it to the center of Toshiba, that they said its necessary to replace, but they told me that it will cost US $266. So I decided to buy it at the other store. I found the MODEL UJ-875 after I installed the computer hardware installed successfully, my problem is when I try to insert the CD once a few second CD comes out.

  I try to diagnouse with Fix it messege was THE DRIVE IS NOT ASSIGNED A LETTER (MAST * a DVD - R UJ - 875 ATA DEVICE
  The drive is not accessible without a drive letter assigned.

  Can someone help me what to do or what I have to return the unit? is this compatible or not?

  PS by the way my computer has been upgraded to Windows 7 Home premium

  Thank you
  rtmasagca

  Hey,.

  Wait a moment, Matt: do you have upgraded to Windows 7 with the new CD/DVD drive or do you have it before you exchanged the drive?

  You get this message from Windows?

  If so, it seems that it s not installed correctly and you should try removing the upper and lower filters in the registry:
  http://support.Microsoft.com/kb/314060

• Qosmio F30 - CD/DVD player can't read

  Hello
  any body can help me? A few months ago, I upgraded my Qosmio F30-112 from win XP to Win 7 Home premium, it's working prity good everything works fine. A few days ago I tried to play a movie but my Player cannot read the
  I tried to change another disc, but completely impossible to read a DVD disc. I heard the disc inside works, then I'm trying to trouble shoot using the tools DIFFICULTY was the messages:

  Playing and burning CDs, DVDs and Blu - ray Discs editor details

  Problems found
  The disk in drive [E:] is not detected or is not supportedThe disk in drive [E:] is not detected or is not supported
  The drive is empty, or the format of the disc is not supported. Not fixed
  UT message has been reading and burning CD, DVD and Blu - ray Discs editor details

  Problems found
  The disk in drive [E:] is not detected or is not supportedThe disk in drive [E:] is not detected or is not supported
  The drive is empty, or the format of the disc is not supported. Not fixed
  Insert a CD, DVD or BD completed support

  The player could face a problem player could face a problem
  The status of the device is OK. Windows will keep checking for possible problems during the use of optical drives to read or burn any CDs, DVDs or BDS Detected.
  Potential problems that have been verified
  The drive is a Plug and Play drive of Problemel device has a problem of Plug-and-Play device
  Windows has detected a device with this drive state error and will keep control of problems. There is no question
  A CD, DVD or BD player was not CD, DVD or BD Detecteeun player is not found.
  Windows does not detect a CD, DVD or BD player. It can be unplugged or disconnected. There is no question
  The drive is not assigned a drive letter [MAST * A DVD-RAM UJ-846 ATA Device] drive is not assigned a drive letter [MAST * A DVD-RAM UJ-846 ATA Device]
  The drive is not accessible without a drive letter assigned. There is no question

  Problems found details

  6 disc in drive [E:] is not detected or is not supported is not fixed

  The drive is empty, or the format of the disc is not supported.
  Insert a CD, DVD or BD completed support

  Invites to insert a CD, DVD or BD supported in the player.

  The player could face a detected problem

  The status of the device is OK. Windows will keep checking for possible problems during the use of optical drives to read or burn CDs, DVDs or BDs.

  Potential problems that have been verified detection details

  The drive has a problem of device Plug-and-Play is no issue

  Windows has detected a device with this drive state error and will keep control of problems.

  A CD, DVD or BD player was not detected issue not present

  Windows does not detect a CD, DVD or BD player. It can be unplugged or disconnected.

  The drive is not assigned a drive letter [MAST * A DVD-RAM UJ-846 ATA Device] question does not exist

  The drive is not accessible without a drive letter assigned.

  Details of detection

  A CD/DVD/BD drive is selected
  IDE\CDROMMAT***A_DVD-RAM_UJ-846S___F103___\5&3796F2E5&0&0.0.0

  The type of inserted media and other information.
  The drive is not recognized by the reader. The disc could be damaged, inserted backwards or have a format not supported.

  Collection information
  Computer name: QOSMIO-PC
  Windows Version: 6.1
  Architecture: x 86
  Time: Sunday, May 30, 2010 20:07:10

  Publisher details

  Reading and burning CDs, DVDs and Blu - ray discs
  Resolve problems that prevent playback or burning CD, DVD or BDs.
  Package Version: 1.0
  Publisher: Microsoft Corporation
  Reading and burning CDs, DVDs and Blu - ray discs
  Resolve problems that prevent playback or burning CD, DVD or BDs.
  Package Version: 1.0
  Publisher: Microsoft Corporation
  Reading and burning CDs, DVDs and Blu - ray discs
  Resolve problems that prevent playback or burning CD, DVD or BDs.
  Package Version: 1.0
  Publisher: Microsoft Corporation
  Hardware and devices
  Use equipment and access devices connected to your computer.
  Package Version: 1.1
  Publisher: Microsoft Corporation
  Hardware and devices
  Use equipment and access devices connected to your computer.
  Package Version: 1.1
  Publisher: Microsoft Corporation
  I tried all these things but I can't solve it, an organization can help me on this things

  Thank you
  rtmasagca

  Hello

  Try to remove the UpperFilters and LowerFilters.

  Here are the instructions:
  http://support.Microsoft.com/kb/982116

• Qosmio F30-112 - small strips and dots on the screen

  Hello

  I need help, my laptop (Qosmio F30 - 112) have a problem.
  When I started it scratch on the screen and flashes.
  Then if I try to reboot it works, but not normal; still have a small scratches and dots on the screen.
  I checked it on the Device Manager NVIDIA GForce with a yellow mark.
  I tried to uninstall it but nothings happened.

  Please some body help me what to do in this case?

  And if you have to replace the VGA CARD, is it possible to upgrade? and what (NVIDIAGforce) parts are compatible for my laptop (RAM memory upgraded 4 GB 320 GB hard drive and windows 7 Home premium)

  Thank you
  rtmasagca

  Hello

  Have you tried to install or update the display driver?
  Please check this because the yellow exclamation mark in Device Manager may mean that the display driver is missing and so the graphics card does not work properly.

  Otherwise, it could be a GPU problem.
  This can be tested easily; connect an external monitor and check if the same stripes, points would be visible on the monitor that is eternal.

  If Yes, then it s certainly a GPU problem.
  In this case, only the replacement of the motherboard might help.
  Also, upgrade is not possible.

• Qosmio F30 - file missing or corrupt

  Please can someone help.
  Have a message from work Toshiba Qosmio F30 - 117 abruptly stopped in SafeMode it suggests following file missing or corrupt Windows\sytem32\config\system.
  Screen consists of thick blue & black lines with the projection of windows logon.

  Then you can only boot into safe mode gives above reading and turns off also suggests windows not EQUIPPED tried to recharge but is not possible. I know its old but its my friend suggestions have been people look £30 here £30 but no solutions only that it could be the hard drive get off and make £150, but it might not work.

  I'm of average intelligence old I could fix it by replaceing suggested parts of help please or thank you for suggested reading of John.

  Hello

  What operating system is currently installed?

  If Windows doesn't start over there is not much you can do and I recommend to reinstall Windows from the Toshiba recovery disc. Such a new and clean facility can help power Windows and the new installed Windows system will work also a bit faster and more stable if it s advisable to reinstall at any time (1-2 years).

  So take the Toshiba Recovery disk and follow the instructions on the screen to reinstall Windows.

• Qosmio F30 - remote does not work after recovery

  I replaced the HARD drive in my qosmio F30 and restore windows XP MCE from the DVD of restoration, but the remote doesn't work anymore under windows. However, it always works for the qosmio player. Help, please?

  Hey Kevin,

  You can download all drivers here if you have a European model:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Your model is a bit more if you need to find in * Archives *:
  * Archive * > Qosmio > Qosmio F Series > Qosmio F30

  Check this box!

• Features red and green Qosmio F30-117 - display problems-

  Hello

  I have a qosmio F30-117, and until recently, I was thrilled with everything about it.

  Then, mid session, graphics started to deteriorate, which fixed a reboot.

  Then a few days later, he did it again and this time when I rebooted it came with a display corrupted, a lot of aa in all directions then red and green lines everywhere.

  Managed to get by selecting safe mode with network and got a desktop computer but still with red and green lines everywhere.

  Now its got worse again, when I start the screen of the laptop itself is empty, becomes something because it is not completely black as if it was when its engine turned off, but his Blanck.

  To check I have connected to an external monitor and managed to get again in safe mode with network, but still very bad and always red and green lines everywhere.

  I started to take a ride on the old good www and there are many posters and articles with problems and many mentioning the lines red and green etc...
  so I'm not alone, but no one seems to know exactly what it is.

  Some have mentioned the grateful Toshiba this as a problem and make even if out of warranty repairs.
  Thus, ideas, advice and does anyone know if Tosh have agreed the problem and offer any help?

  Thanks in advance

  Hello

  In my opinion, this looks like a problem of graphics card GPU eventually started to malfunction, and in this case to replace the motherboard.

  > Some mentioned Toshiba grateful that as a problem and make even if out of warranty repairs.
  Thus, ideas, advice and does anyone know if Tosh have agreed the problem and offer any help?

  It doesn't have to be dull I ve also found this update from Toshiba product support page, but there is nothing listed on the problems of F30
  http://EU.computers.Toshiba-Europe.com/innovation/generic/PRODUCT_UPDATE_SUPPORT

  What to say. Seems only a technician ASP might solve your problem, but replacing motherboard is a costly affair so it s your own decision to want to do

  In any case... good luck...

• Adapter Qosmio F30 AC fried (burnt cables) is it the fault of notebooks?

  Laptop = Qosmio F30/695ls

  I was wondering if other people have encountered this problem? Is this a fault in the design of the adapter? The adapter model number is; * PA3237U-3ACA. *.

  The cord was fine until today (looked perfect) death of my laptop I thought it has not been plugged in properly checked if all parties, but each has been connected - then I noticed a melted part where wiring has been merged with plastic sheath. (just after the elbow on the wire protector which leads to the laptop leaves the ac adopter)

  I would just replace it immediately if I know it's only fault the adaptors - however I am worried there is a problem with the laptop itself. In the last few weeks, I noticed a very high frequency noise coming from him. Sometimes near the back where the power cable is connected and other times near the waterfront where the battery and HARD drive are (the drive is new and only a few months old) the laptop itself is almost 3 years old bought in June 2006. I'm afraid that the AC adapter has damaged the internal power system or the internal power supply was to damage and killed the adapter? Does anyone know how to check if the laptop is damaged internally or if it's just the AC adopter? I don't want to just replace the adapter and end up frying the motherboard!

  I have a second battery with a few minutes of charge, so if you need me to check anything on the laptop I can (operating system is vista)

  Any ideas at all about the cause of the problem, welcome!

  Oh PS. I live in Ireland, the electric current that he 220V and it is also connected to the Earth, I use an adopter plug multi protected against overvoltages.

  Hello

  > Does anyone know of a way to check if the laptop is damaged internally or if it's just the AC adopter? I don't want to just replace the adapter and end up frying the motherboard!
  You can easily test.
  Simply unplug the AC adapter and check if the laptop works correctly using only the power of the battery.
  Generally, the laptop can not damage the AC adapter! As far as I know technically this is not possible then I guess that your adapter is defective and must be replaced

  See you soon

• Questions about the Qosmio F30-141 and OS

  Hello!
  I intend to get laptop Qosmio F30-141, but after purchase I want to replace an operational system on Linux Fedora Core, and with she would like to know, if properly supported by the given operating system this model (supported wi - fi particularly interested), or recommend another model?

  Thank you

  The problem could be that the Toshiba does not support Linux drivers and you will have to search in internet and 3 third-party Web sites compatible and supported drivers!
  Besides computers laptop Toshiba supports several tools and utilities that enables the features of the laptop.
  I imagine that you will not be able to use these features as FN keys for example

• Need systemboard Qosmio F30-111

  Hello

  I need a new systemboard for a Qosmio F30-111? (PQF30E-00Z00QDU). The video card is faulty. I live in the Netherlands and it is impossible to find a new systemboard. Can someone help me find one or more companies that can fix it like they do in the United Kingdom. In the United Kingdom, you have a company that can fix without replacing the motherboard (http://www.laptoprepair1.co.uk/laptop-vga-video-repair.html), but they only repair it for the citizens of the United Kingdom only.

  Thanks in advance,
  Charles

  Hmm, motherboards are designed specifically for the single computer series laptop and if you want to buy a motherboard for your Toshiba laptop you will need to contact the ASP in your country.
  Guys should be able to order it directly from Toshiba.

  However, you can view some websites like Ebay for a flea market.

  Good luck

• Card of Qosmio F30-140 is scalable?

  The Qosmio F30-140 comes with a Nvidia GeForce Go 7600 equipped factory.

  Hi mate,

  Unfortunately, the VGA chip cannot be replaced since it s "wired" on the motherboard, which means that the GPU is soldered on the motherboard.
  If you want to replace it you will have a soldering station, which costs probably above 13,000 bucks and a team that knows in soldering BGA (http://en.wikipedia.org/wiki/Ball_grid_array) and maybe you have plans of engineering for the motherboard and and it wouldn't hurt to have at least two programmers for the creation of a new BIOS, which implies that you have some connections to Toshiba Japan because the BIOS is not a FRIEND, it s one or Phoenix BIOS toshiba which has its own characteristics and I Don t know a soul who managed to enter the structure of such a Toshiba BIOS.

  I hope I was able to clear your mind. :)

• Qosmio F30-147 broken due to overheating

  * Qosmio F30-147 *.

  Hello dear toshiba users!

  My laptop seems to be broken because of overheating.
  When I noticed that the fan was running at high speed and the chassis was untouchable hot.

  Also, the system has been frozen and the display shows vertical stripes of color.
  After an hour or two, I tried to start it again and it could not start. I got was a screen with two-colored vertical stripes ([see photo | http://img134.imageshack.us/img134/1040/img0472c.jpg])

  Because my system does not appear at startup, I guess that's more than a failure of the graphics card.

  Any suggestions?

  Much appreciated!
  I am lost without my qosmio!

  Hello

  It s a shame to hear this companion
  According to your screenshot the GPU or the display may be affected.
  But the laptop would still be bootable so only display would, so in my opinion, there is something wrong with the graphics chip.

  I think that in this case that the whole motherboard must be replaced.
  There's not a lot of proposals for solutions. You need help from the ASP in your country.

  Here you will find the database with all the FSA world wide:
  http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service provider

  Good luck & cheers

• Upgrade Vista on Qosmio F30-111

  Hello world

  Thought IA´m, purchase a Qosmio F30-111.
  It comes with XP but I want to upgrade to Vista. Everyone set to upgrade to Vista in this specific model without any problem? I already heard that upgrading to Vista in some Qosmio models is a pain...

  Thank you very much help

  Hello

  The installation is easy, but don't forget to install the RAID driver first!
  Without this driver, you will not be able to install the OS on the HARD drive!
  But all the drivers are available on the Toshiba page.

  The new facility is more appropriate to replace the upgrade from XP to Vista because not all XP utilities are compatible with the new Vista operating system!

  Check it out.

• Qosmio F30-127 is unable to read the Vista upgrade disc

  Hi guys,.

  I have a Toshiba Qosmio F30 (127) with the standard front load Mat * a DVD-RAM (model UJ-846) Player.

  I have for months without any apparent problem burn a variety of CD DVD & (R/RW) and recently received my expected Vista Express Upgrade DVD which I assume adopts the format DVD RAM.

  After the upgrade of the BIOS to v3.4, I successfully installed upgrading startup, but only one of the hard drives (RAID) which has been recognized in my windows session (with the recoil, I would simply have used administrative tools > computer management > disk management) ;-(

  I reinstalled XP using the recovery disks provided original in preparation to retry the Vista upgrade a 2nd time to correct the alleged no recorded 2nd hard drive.

  However, on the startup of XP, the Vista Upgrade DVD doesn't have to be recognized at startup (i) or (ii) in the case of a Windows session, without a visible change in the drive icon to indicate the usual recognition.

  If I try to double click on the drive icon, I get the error message:

  "D:\ is not accessible. The request could not be performed because of an i/o device error.

  I have read a number of threads of support which advises: (i) changing some registry keys, which seem to be unnecessary following a procedure of recovering costs of system; (ii) the transfer mode to DMA to PIO on the primary IDE channel in Manager devices, and (iii) the offending disk and IDE/ATAPI controllers Device Manager uninstall followed by a restart of switching. I tried (ii) & (iii) independently several times resulting in Windows Installer automatically the drivers for the hardware newly found followed by a final reboot, but the Enigma DVD persists.

  I tried to install the latest drivers for the DVD RAM driver, including vF103 firmware update in the Toshiba download pages, but the status quo remains.

  Ideas or current symptoms are swinging more and more towards the likely hardware malfunction?

  Thanks for listening...

  For me, it looks like a hardware problem, maybe the lens of the player is not clean or not can not calibrate correctly in the right position

  But try first to remove the drive from Device Manager and restart the laptop.
  The operating system should recognize what it again automatically. If you want to read from this CD, and then try again.

  If she will not change the situation, then I presume that it s a failure of the equipment.

• Qosmio F30: green and Red pixels on the screen and cannot load Windows

  Pleas help me, my laptop is Qosmio F30. All of a sudden when I turned on my laptop, the green pixels appeared on my screen and could not go to Windows.

  I look it as a problem with VGA, but it can show perfect windows color flag when it came to Windows.

  Please help me...

  > I that it was a problem with VGA, but it can display the perfect windows color flag when he entered for Windows
  I m interesting in your state.

  Are you able to connect in windows; Yes or no?

  I don't know if this problem could be related to dysfunction of the m graphic card or display.

  It would be advisable to connect the laptop to the external display to make sure if the same would appear on the second monitor.
  If so, then a problem of graphics card would be possible

  Anyway, in both cases the ASP must be contacted because the defective part must be replaced if it s a hardware problem