question of HDMI input

Similar Questions

• Toshiba 32TL838: flicker after fw upgraded in the menus, using HDMI input

  Hello

  yesterday I updated firmware of my 32TL838 to version 6.4.0Y.1 / 94.6.27.8 using the upgrade feature network.

  After the upgrade, I reset the TV to start again with the factory settings.

  During the quick installation after the reset, I noticed a very bad video quality. The entire image flickered, had a ghost effect and looked at interlaced. The menus were almost illegible.

  Once the installation is complete, the TV switched TV (cable DTV) normal mode and at least the TV picture looked quite normal. While the input CABLE is selected, I can also open menus as before, they are displayed correctly.

  But as soon as I switch to the HDMI input, the image becomes nuts once again, just like during the initial installation, including recoveries of TV menu. Sometimes it becomes stable for maybe 30 seconds, but then he is paralyzed again.

  A few words about my setup: TV uses only input HDMI 1 and the cable entry, nothing else is connected.
  Links to HDMI input to a receiver Onkyo TX - SR508 AV which is powered by a Fantec 3DS4600 media player and the Blu - Ray BDP - S373 player.

  Because I expect the question of what-to-your-HDMI-wiring, I traded the HDMI cables but as expected which has not helped at all.

  At least, I seem to be successful by bypassing the problem when you use the Fantec drive.

  Before I updated the firmware, I was able to use the drive with 1080 p/60 Hz and the player has been installed as a result.

  Now I switched to 1080 p / 50 Hz, and the video image seems OK again. (However, I made a short test and as I said, sometimes_
  the image is OK for a short period).

  Unfortunately my BluRay player has no menu to change the frequency, so I watch BluRay or online services, the player offers, is impossible.

  So, what can I do now? A downgrade of firmware (if possible) would be a quick temporary workaround I could accept. But medium-term I'm expecting Toshiba to restore functionality that they promoted and for which I paid.
  (Youtube stopped working with the old firmware and it seems that 1080 p/60 Hz no longer works with the latest firmware).

  Anyone know how to downgrade the firmware using a USB? I already downloaded the previuos version tl838_853886.bin but I do not have a nail how (and if) it can be installed.

  Thanks for your advice
  BELEKTRO

  Hello

  As far as I know the isn t possible downgrade firmware.

  But you said that you noticed this problem by using an external device connected to the HDMI 1 port.
  As far as I know the Toshiba 32TL838 supports 4 HDMI ports.
  I recommend you to check all of the 4 HDMI ports as well as to check all device configuration options.

  Check for example the rate of active movement + option available.
  This option allows to improve the rate of cooling of a TV

• Apple TV is no longer active in order to correct the HDMI input

  Before the last gen 4 apple tv update, when the apple tv was turned on, the TV should be enabled (we have an older Sony Bravia) and passed to the HDMI input used by the apple TV. With the latest version of apple tv, the TV is turned on, you hear a click (as if the apple tv has been trying to pass the HDMI inputs) but used the HDMI input on the last remains. The HDMI input for the apple tv is never bound by the apple tv.

  Everyone has noticed this problem with the latest update to apple tv? I missed a configurable option that must be specified for the behavior of earlier versions of gen 4?

  Apple: Please restore the nice feature that existed before the last update to apple tv.

  Works fine on my system. How HDMI CEC depends on television, check to see if yours is an update. This is a user forum, you're not address Apple here.

• When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

  When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

  Yes it will be displayed.

• I recently bought Apple TV but the TV I want to hang up to does not have an HDMI input.  I bought a converter HDMI cord at Radio Shack, but it did not work.  Any suggestions?

  I recently bought Apple TV but the TV I want to hang up to does not have an HDMI input.  I bought a converter HDMI cord at Radio Shack, but it did not work.  Any suggestions?

  You may be able to find a connector to work but which would not guarantee that he would not stop working on the road. Minimal tech spec of the ATV4 is a HDMI connection to the tv. My recommendation is to upgrade your TV rather than trying to get a square peg in a round hole. That's just my 2 cents...

• HDMI input/output

  Hello

  I have a HP Pavilion dv7-6c54ea, and I wanted to connect my PS3 to my laptop to show the game on my laptop. I looked in my manual but I can't know if my laptop has a HDMI input option. I do not want to connect them to the case where I break my laptop.

  Thank you

  Ross

  Hello

  The HDMI port is released only.

• will be HDMI input / support hp dv4 3015 tx?

  Hello! No, my laptop model is HP Pavilion dv4 3015tx. He holds a HDMI connector, but I don't know if it's a HDMI input or output. Support HDMI input? Can I connect my Playstation 3 laptop and use it as a display device?

  Hello

  Your laptop's HDMI port was released only.

  Best regards

  DP - K

• HDMI input

  I have a 2350 all in one and I would like to connect HDMI output my laptop to the HDMI input on my 2350. I have it hooked up physically, but I need to know how to display what is on my laptop.  I don't see anything about this in the manual.  Does anyone know how to do?

  Thank you

  kjhinorbit

  There is a button on the side to use to select the external signal for display.

• Dell inspiron one a HDMI input with output usb audio

  Hi, I recently bought a dell inspiron one 2330 and some of my blu - ray high-fidelity discs do not work very well at all. :(un peu déçu car c'était la principale raison que je l'ai acheté.)

  So I tried my blu - ray player in the HDMI port, but now it only uses the computer speakers not my B & W Zeppelin air via the USB input.

  If advice how to fix the blu - ray glitch player that seems to start and stop on most of my records or produce audio output to HDMI input to the USB port would be much appreciated

  Thanks in advance.

  Which seems to indicate a problem with your video card. The cooling works may not properly. I would contact Dell on the replacement of it. This may explain the poor video performance.

• REGZA WL66: HDMI input has stopped working

  Hello

  the HDMI to my Regza WL abruptly arrested two weeks after having worked well for several years of work. Previously, the different types of devices have been recognized without any problem: DVD player, receiver, laptop, Media Player. Now, no device is recognized at all, the screen remains blue.

  The cable is not the problem. I tried with different cables and also tested the cable with the other monitors; they are ok.

  Is it possible to fix this?

  (The SCART and component input still works - but is not HDMI).

  Thanks in advance for any ideas.
  Sundowner

  I ve checked a bit for this laptop model specification and I discovered that this TV has two HDMI ports.
  Have you noticed the same problem with two HDMI ports?

• Its control on Inspiron 2330 with HDMI input

  I can watch live TV on 2330 Inspiron AIO, digital decoder output HDMI to HDMI in on 2330 and switching input button on the side of the screen. The sound comes through the speakers, but I have found no way to control the volume. I would appreciate any advice on how to do.

  Old Hi Doc,

  You can change the Volume and Audio settings.

  Follow the steps below to do so:

  • Click the start icon.
  • Click on Control Panel and select Realtek HD Audio Manager to launch the utility.
  • The utility is also accessible by clicking the start icon
  • Click on Control Panel
  • Choose hardware and sound, selecting Realtek HD Audio Manager.

  See the image below for the interface:

  

  Let me know how it goes.

• Alienware 17 of xbox via HDMI input

  My input (HDMI-IN) does not work.  Im trying to play my Xbox360 on my Alienware 17 displays and he says he can.  I went on YouTube and I saw other people play screens I don't know how to use my screen. I mean I don't know how to turn on step by step. Help, please!
  1. turn the cap of the xbox everything in
  2. plug the 17 ALienware (HDMI IN) of entry and I pressed the key on the keyboard to
  3. nothing happens and when I press the button says "please connect device (HDMI-IN).

  

  I know you can do that too, it's one of the reasons why I bought my m17x r3 (old version of the Alienware 17). I have my xbox 360 sitting right next to me as I type this.

  Hear the concern seems to be that the system does not recognize the connection. I recommend you to install the latest drivers and bios (always good to do) and also test cable xbox and hdmi on another facility, such as a TV, to ensure that it works well.

  I would also test other hdmi, if you have a. As a cable box, player roku, tablet screen, other game systems, DVD players, etc.

  Let me know what happens :)

• STR-DA5700ES no video/audio HDMI inputs no

  STR-DA5700ES has no audio/no video inputs HDMI (except PS3 hooked up through GAME that works). It was fine yesterday (for the last 2 years). Now, suddenly, there's nothing. I did a power reset (by holding the button until it has adjusted) and exchanged the HDMI cables. Any suggestions?

  Turns out have been a matter of HDCP, possibly caused by cables, which have now been replaced with new cables by their manufacturer as directed by their guarantee. The problem can only be solved by completely reset the 5700ES (memory clear). Please consult the manual of Sony if you're having a similar problem.

• Question about audio input on Satellite 1410 304

  Who can help me? I want to connect my discs rotates through an amplifier to my Satellite 1410 304 to digitize my vinyl. I used the helmet on the amplifier output and connected to the audio input on the laptop (microfone entry), but don't get all the sounds. Help!

  Hello

  A friend of mine tried to do the same thing, but he used some external device and special software which are necessary for his transfer and editing. Please don t ask me how it works exactly.

  If you want to record sounds by using its port, you can do this by using the utility of Microsoft Sound recorder, but I don t know if this can help you. All saved files are in wav format.

  Good bye

• Question about keyboard input language settings

  Some wrong characters when you press on pump keys. for example: "when printing on keys 2 gives a @ onscreen, while that, you guessed it: @ gives '." "

  I think I got some settings wrong somewhere, I put everything to the United Kingdom in the language folder in the control panel (also in advance).

  It's probably pretty simple, but annoying, as usual, it is difficult to find what exactly to do in windows.

  If anyone knows what to do, please let me know.

  Hello

  As far as I know if you instead of, you just change the keyboard input language. Please click the taskbar with the right button of the mouse and go to Toolbars > and enable the language bar option. On this way, you can see which input language is active.