Lenovo T420s sim reader

Similar Questions

• Lenovo T420 with Windows 7 Professional 64 bit - Windows Genuine validation failure

  I have directly from Lenovo Lenovo T420 bought end of 2011 which began recently to show the message that its not running Genuine Windows.  He fails to pass the validation test.  He also stopped treatment of the Windows updates since December 15, 2014.  All fail with the error 800706F7.  I don't know if that is related to the failure of the validation.  I would like to get the Windows validation problem all solved first guess that they may be related.  Is attached a copy of the report full diag.  Any help would be greatly appreciated.

  Update: called Microsoft validation and validation of phone attempt to id software.  Has been informed by the agent that the product ID has been blocked by Lenovo.  Suggested I upgrade Windows, purchase a new license or call Lenovo.  Release with support from Lenovo and told me that they have no way to block a product code.  Suggested I try an upgrade of BIOS or reload the operating system.  Have you the BIOS upgrade result has not changed.  Also updated the driver Intel Rapid Storage, but again no change on the system.  Read messages where that fixed similar symptoms).  Latest report of diag is the same as that posted here. Operation of the system with the exception of the issue with the message on non-genuine software and updates of Windows does not not error code 800706F7.  Looking for more information.

  Update: 2/29/2015 KB3004394 was not as installed on this system.  I ran a system scan and it shows the following missing components. There are several entries in the CBS for the latter.  I have included only the first two entries in the newspaper here.

  2015-02-26 14:44:51, CSI 00000031 [SR] (F) component not found error: Microsoft-Windows-Security-SPP-Client, Version 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral [gle = 0 x 80004005]
  2015-02-26 14:44:52, CSI 00000033 (F) [SR] component not found error: Microsoft-Windows-Security-SPP-Client, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral [gle = 0 x 80004005]

  Last update: after trying the suggested corrections that have failed, I did a complete system restore.  Too bad the updated Microsoft corrupted the system.  System is operating normally and is more pointed out the error of "Genuine Windows" and updates are being processed. KB3004394 is not installed.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - MV8MH - 98QJM-24367
  The Windows Product Key hash: wgci5Gdejx4esg7 ++ zTOe3LWF + 4 =.
  Windows product ID: 55041-OEM-8992671-00437
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {22F7EC30-3D0A-4976-8B56-DEBC5D4932EA} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {22F7EC30-3D0A-4976-8B56-DEBC5D4932EA}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-2436755041-OEM-8992671-004372S-1-5-21-3472518507-4194242798-1320595179LENOVO4177CTOLENOVO83ET63WW (1.33)20110729000000.000000 + 000AE573207018400FE04090409Time(GMT-05:00) Standard is03LENOVOTP-83 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00178-926-700437-02-1033-7601.0000-0462011
  Installation ID: 002863102281984756058661281352504713742266826592579230
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 24367
  License status: licensed
  Remaining Windows rearm count: 2
  Trust time: 25/02/2015-17:53:39

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 2:25:2015 17:28
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current Hash HWID: LgAAAAEAAQABAAEAAAABAAAAAwABAAEA6GFgK1XXbsFu6wQC1qoEIwKrPpoucw ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC LENOVO TP-83
  FACP LENOVO TP-83
  HPET LENOVO TP-83
  MCFG LENOVO TP-83
  SLIC LENOVO TP-83
  SSDT LENOVO TP-SSDT2
  SSDT LENOVO TP-SSDT2
  SSDT LENOVO TP-SSDT2
  CO-SUBMISSION LENOVO TP-83
  ASF!   LENOVO-TP-83
  TCPA PTL LENOVO
  SSDT LENOVO TP-SSDT2
  SSDT LENOVO TP-SSDT2
  UEFI LENOVO TP-83
  UEFI LENOVO TP-83
  UEFI LENOVO TP-83

  Hello

  Thanks for posting your query on Microsoft Community forum.

  According to the description of the problem, you can not install Windows updates and get a non-genuine mistake. As you have mentioned that this whole issue started since 15 December, so there might be a chance that some updates to move that could cause the problem.

  The KB 3004394 which was dated December 10, 2014 update can cause additional problems on computers that run Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1. This includes the inability to install future updates. This new update is available to remove KB 3004394 from your computer. Thus, there could be a chance that this update is installed on your computer that is causing the problem.

  According to my research and findings that I got to know only after you have installed the Microsoft KB3004394 update that was released on December 10, 2014 and Microsoft has disabled since the relevant updates. Some systems also provided a Windows is "not authentic" error caused by the same update.

  So try to remove this update of the updates installed, if it is installed and hide so that it can be installed in the future of its own. You can check the link below to complete the task.

  Remove an update

  You can see the below mentioned steps to hide an update.

  1. Click on start.

  2. Now click on all programs.

  3. And then click Windows Update or Microsoft Update.

  4. Now, click on custom.

  5. Click to clear the check box next to the update KB3004394 .

  6. Expand the KB3004394 update you want to hide, and then click the checkbox "don't show me this update again".

  7. Click review and install updates.

  For more information please refer to the suggestion of José Antonio answered the February 10, 2012.

  How to hide / disable a priority update of Windows KB2633952 that already has an update on my computer?

  Additional information:

  You can see the thread mentioned below for details on the error message and the resolution.

  Get the error code Windows Update 800706f7

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• How to print screen on lenovo T420?

  Hi, how to print screen on lenovo T420? I can't find the print screen key... Thank you

  I don't know what is the combination of keys, but you can use the tool captures Windows 7 for a shot full-screen.

  Cutting tool

  Z.

• Equipped with mobile broadband with Lenovo B560 / SIM card / no reaction if pushed SIM card

  Dear Forum

  I have byued "nine" one lenovo B560 - quiet price specifications.

  But now I'm trying to connect to internet with my SIM mobile broadband WebClient and do not find a way to do it!

  The laptop is equipped with a SIM-Card-Slot-In card and throug this Slot I can see some golden conectors.

  But if I turn on wireless with [Fn] + [F5] I can't see the WLAN on/off switch card.

  Even the installation of 5 ReadyComm has not resolved my probs.

  My mobile is Win7 home premium with the typical standard configuration, no change.

  Is there something that I did not?

  I appreciate any help, thanks in advance!

  Greetings - sand

  Hello mate,

  It's not because you have a card reader sim you have a modem installed inside.

  If your laptop is wwan ready, it comes with the sim card reader and installed antenna, and that's all.

  If you don't see the wwan modem in the Fn + F5 menu it is probably because you do not have a modem.

  Take a look here to see if you have a wwan modem or not: http://consumersupport.lenovo.com/us/en/configuration/configuration.html

• T420 - fingerprint reader does not read the skin dry or wet

  I used the fingerprint reader of my old T61p for years with great success. It didn't matter that my skin is dry or wet, or even if my fingers are a little fat - identification has worked well.

  Now with my T420, I noticed that the fingerprint reader detects my fingerprint only, if the skin on my finger is 'normal', i.e. it does not detect the reading if my fingers are wet or dry. When my fingers are dry, I must always first lick my finger and then wide, this helps.

  It's very annoying feature - is possible to configure the fingerprint reader to be a little less sensitive to the dryness of the finger skin?

  Go to the Lenovo Fingerprint Reader software and look for a slider between Dresser and protected. This move to Dresser; It should contribute to the sensitivity.

• Lenovo T420 3.2.002 Solution Center does not display tile system

  Hello

  I have a T420 running Windows 10 with CSL 3.2.002 injstalled. The Solution Center does not show the System tab, and so I can't do anything with it. Any suggestions?

  

  Yes,

  Lenovo came out with updates and the latest version of the Solution Center (3.0.0.3 from the website) and 3.0.0.4 upgrade all issues resolved.

  Hope this helps.

  See you soon,.

• Z400 Lenovo Ideapad Card Reader does not detect anything

  I have installed the lenovo z400 appropriate card reader driver, restarted my laptop...

  inserted my sd card, then the laptop does not detect anything, pls help!

  PROBLEM SOLVED!

  I just kept my laptop mode "sleep" for 20 minutes, when I opened it back, something has been installed, then I saw that it was the driver of the card reader.

  Card reader works now!

• Lenovo P780 - Sim Card problem

  Hello

  I bought lenovo P780 2 months back.

  Suddenly, he is not able to detect one of my sim cards, sim cards are active.

  Cannot send messages, make calls. Told that emergency calls only.

  Please suggest a solution.

  
  

• Can I still a (t420) fingerprint reader?

  I recently bought a t420 and did install a windows cleaning 8.1. Everything works well except the fingerprint reader. I went through all that have the post about people of questions, but I'm starting to wonder if I have another one. Nothing is displayed in the Device Manager and trying to erase the fingerprint data in the bios it is not found either.

  Is the Center middle button directly and especially the touchpad fingerprint reader (it has 7 white dots on it)?

  N ° it is the middle button of the mouse on the trackpoint. If you have a fingerprint reader, what it would look like a visible location under the arrow key down

• Change of Lenovo t420 video card

  Hello, I want to know if it is possible to add to a lenovo with intel Hd 3000 integrated card t420 a dedicated nvidia card, as nvs3100m which is the one that has best t420, ore better.

  Thank you

  This would require a new motherboard and the new heatsink / fan

• Lenovo T420 with multiple questions

  I recently bought a T420 used for around $740 CDN - i7, 8 GB of RAM, 320 HARD drive WIN7PRO

  It has several issues, but since it is still under warranty, I thought I'd take a chance and buy it.

  Questions:

  -defective fan (makes great plaintive sound)

  -white spot (halo) on the lower left of the screen visible on white background

  -the apparent defects in the bezel, the lid and palmrest

  -keyboard has flex/elbows in when I type

  -hinges make noises

  I don't know if the repair depot will replace the damaged parts of cosmetically, but hopefully (I wrote them a nice letter asking them to replace the parts, even if it means I have to pay for them).

  One thing I noticed is that it takes about a minute or two to start windows with the preloaded operating system Lenovo WIN7PRO. I don't know if a clean install of normal windows help or maybe add in an SSD. What do you think guys?

  In any case, it's my story.

  Well, I got my laptop back today and they fixed everything, the cracked LCD bezel, bezel palmrest, replaced the hinges and the LCD screen. One thing they have not replaced was the cover that had the apparent defects in the words "lenovo." I had to order a new lid of China and install it as soon as it comes.

• How to set up two monitors on Lenovo T420 with docking station.

  I have a T420 on a docking station (cradle ThinkPad series 3, #4333710U)- and two monitors (each aprox 24 ").  I tried several variations using the NVIDIA display as well as the native Windows Display Manager (7) and am unable to render images on the two external displays.  Can someone please help?

  Hi John,.

  Thanks for posting your question on the Forum of the Microsoft community.

  I would be grateful if you can provide us with the following information to determine the root cause of the problem.

  1. Did you do last changes made on your computer before this problem?

  2. Have you tried to monitor primary as secondary and vice versa?

  3. All device drivers are updated?

  After reading your post, I understand that you want to use two monitors with extended view, then you can try the steps in the following Microsoft article and see if it helps.

  Move windows between multiple monitors

  http://Windows.Microsoft.com/en-us/Windows/move-Windows-between-multiple-monitors#1TC=Windows-7

  If the problem persists, then pass to the below mentioned method and see if it helps.

  Method 1

  If you haven't tried Exchange monitors so I suggest you to try and see if the problem still occurs.

  To change the settings of two monitors you can consult the links below:

  Guided Help: Setup dual monitor is easy in Windows 7!

  http://support.Microsoft.com/kb/976064/en-us

  Change settings display on multiple monitors

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-display-settings-on-multiple-monitors

  Note: This link is also applicable for Windows 7 .

  Method 2

  If the problem persists I suggest you to update the display drivers. As the display drivers for two monitors are not the same, so try to update and check the status.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  You can also try to update the drivers from the manufacturer's website.

  NVIDIA DRIVERS

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Lenovo T420 Bluetooth does not work

  The Bluetooth on my T420 done nothing at all. I have several Bluetooth devices that can locate and connect to each other, but nothing is found by the mobile phone. I can't even open the Bluetooth settings. When I go to the bar at the bottom right, do a right-click on Bluetooth, and then select settings the mouse icon displays the circle of work briefly, then disappears without anything happening.

  I realize that it's now an old thread, but just, I solved this problem. Here is the help I found:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/devices-and-printers-is-blank-HA...

  The problem was that the Bluetooth support Service has been disabled. Thanks for the given suggestion and I hope this can help someone else in the future.

• Computer laptop Lenovo (T420) fails Hibernate.

  Hello

  The laptop computer Lenovo I running an edition 64-bit of Windows 7 SP1 Ent edition and for some reason I can't it hibernates.

  When I try to it hibernates, it seems as it passes to the State of hibernation, but when I turn it back, he starts fresh.

  I tried to update the BIOS and all device drivers.

  What I suspect is that when starting to return, it is not picking up the entry in the BCD for hibernation state and making rather a new beginning.

  Any help welcome and thank you in advance.

  PS: It's an office job / portable and is part of a domain, and it was an image installation that has been done rather than installing from a DVD. I used to have a Dell with the same OS and it used to Hibernate and so I know with certainty that there is no GP who is disable hibernation.

  Changappa.

  Hi Changappa,

  Thanks for posting your query in the Microsoft Community Forums.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Questions of Lenovo T420

  I got this today to run, Gopro Studio software.

  I5 2520 m 250ghz, 4 GHB ram windows 7 pro 32-bit.

  When I download from the site of the Gopro, it downloads in my downloads folder, then click to run and nothing happens, it's dead.
  Had an error. 80070661

  Any help appreciated

  Think that the vantage Toolbox has stopped working also, as well as a few other things

  All ideas

  Concerning

  Marshall