range of printers all-in-one HP 7515.

Similar Questions

• Range of printers all-in-one HP 2710

  Recently installed Windows 8 driver for my HP 2710 all-in-one printer.  Message that the Installation was successful, however, test page does not print at all. Sent some documents from another application to print, it showed the PRINTER STATE of ERROR and 2 or 3 in waiting in the queue.  Note: I checked the printer, replace the color cartridge and the alignment test was perfect.  Thanks for your help.

  Welcome to the Forums, atirande!

  I noticed your post not being able to print after a recent Windows 8 upgraded. I would like that you try to run the HP print and Scan Doctor which is a tool that will search for printing errors and correct them.

  I hope this helps!

• Range of printers all in one HP C4280

  Photosmart C4280 all-in-one - changed the ink cartridge and print alignment page but now paper RSS to halfway and get message that says transport jam. No visible jam. Following video instructions to reset and hard reset.  Cleaned all the reels twice and still the same.

  You are welcome.  I wish that would work for you.  You have tried everything in the document of solving problems, but nothing did.

  The only other thing I can think of would be to do a complete reset of semi.  If successful, this reset the default printer and clear the memory.  If the printer was on a wireless network, it should be removed and would need to be reconnected.  If you want to try this, I can send you the steps in a private message to your Forums HP box.  I need you agree to not post the stages.  Let me know what you decide.

• Range of printers all in one HP PSC 2175v

  can it scan or print LEGAL SIZE?

  richierich2175,

  This printer does not have the features scan or print legal size. HP has some models who will bring this feature. You can feel free to contact the Home Office and the HP home for you help, if you are looking for one.

  1 (888) 999-4747

  I hope this helps.

• Windows 8 Solutions for Laserjet, MFP printers, all-in-One and Scanjets

  To help customers to use their products with Windows 8 successfully, HP has identified the drivers recommended by product. Please see the following support documents for more information:

   

  LaserJet - printers, multifunction and all-in-one devices supported in Windows 8

  LaserJet and Color LaserJet - produced with care delayed in Windows 8

  ScanJet - Scanners supported in Windows 8

  LaserJet and Color LaserJet - printers, taken in charge or with limited Windows 8 Support

  LaserJet Color LaserJet and LaserJet AiOs/Multifunction - products not supported in Windows 8

  If you have a problem with the installation of your printer from Windows 8, please start a new thread and include your printer in the title of your post. Please, do not respond to this post. As new help documents are available, they will be posted on this subject.

  If the resources above do not meet your needs/questions or you need additional assistance, please visit:

  Additional resources that are available to help customers with their LaserJet printers, multifunction and all-in-one include:

  HP LaserJet and multifunction and each Color LaserJet - printers install the driver included in Windows 8 or Windows Update

• All-in-one Photosmart 7515

  How to reduce or enlarge the size of the object to print?

  If you print from an application, you will need to use it. If you make a copy of the printer, you can adjust the menu to copy.

• Customize the envelope parameters and SAVE on HP all-in-one printer, 7515. Capacity exist?

  Using Windows XP. Have downloaded additional drivers and software. When I bring up Microsoft Word and go to the printer for envelopes of installation page, it seems that there is a custom setting (to set the width and the length of the special envelope size), but you can't 'save' this setting under a particular name and find him listed anywhere for other applications to use. The name of the variable 'custom' seems never appears in the default list of options.

  Willie, the answer here is not - or at least this isn't something I've heard of. Your question is not so much dealing with our software with MS Word. There is not a way to save these settings for future use. You might be able to set them as default in the printer preferences, but then you have to change every time you printed on media other than this custom size. The reason for this is because "custom" is a classification variable, which can change and so there is no concrete value of the program to give him.

  I hope this information is useful for you!

• Assistant printer stop working for my HP 5510 all-in-one, B111a, Windows 7, IE 11

  HP printer Assistant for the range of printers all-in-one HP 5510-B111a stopped working about 3 weeks ago. I have a Dell desktop computer, I installed Oct-2013, which are running Windows 7 and IE 11 (was perhaps?). Shortcuts to the Assistant printer is still there, but when I click it, nothing happens. I reinstalled the software, both from the original CD, download HP online, tried about 6 different advice from people online and even restore my computer to 25/03/14 and it still doesn't work. He perhaps could have a day or two before when it stop working and I'm not sure of the date, I've upgraded to IE 11. I googled and found that there are of course many others out there with this same problem. I have the scan icon and can perform these functions, but the Printer Wizard I would check the ink levels, troubleshoot, clean the print heads, print diagnostic reports, that everything I used, so, basically, I lost this feature.

  Hi there baylor1,

  I managed to find a solution that is good enough to make me happy!  I posted the details in the other thread, and I hope that it might work for you too.  There are a couple of minor NAGs with the solution and I still think that HP have work to do to find out what causes this problem for people, but I think you will find that it is much easier to reinstall windows!

  I hope this helps.

• HP psc 1210v all-in-one: load my printer HP 1200 Series on my computer Windows 10 sw

  I still have my HP psc1210v all-in-one printer and the SW CD there.  I now have a computer Windows 10.  I can load the SW from CD to my new computer.  I don't want to start just good willy nilly, loading files on the CD.  Are there procedures somewhere?

  Thank you

  Bill

  @bbohley

  The CD does not work - the drivers on the CD are not compatible with Windows 10.

  Printer:

  Range of printers all in one HP PSC 1210v

  Instead, to the Support page of the website of the printer, there are instructions for installing the basic functions of printer using Windows drivers.

  HP print driver printer - install and use the built-in Windows

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP ProBook b 6450: Solution Center Software for the range of all-in-one printers, HP Photosmart C4385

  I installed the package full HP printer and it has not installed the solution Center. Impossible to find. Need this to scan documents. What should I do?

  Hello

  You can download the complete software of this site features:

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-C4380-all-in-one-printer-series/3221640/model/3221645#Z7_3054ICK0K8UDA0AQC11TA930O2

  Once you have done this, is that you can uninstall before reinstalling the software downloaded?

  This printer model IS USED the Solution Center.

  Let us know how it goes.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• NO HP DEVICE HAVE BEEN DETEDTED all-in-one printer, HP Deskjet F380 range

  Dear HP

  I need help on this error NO HP DEVICES HAVE BEEN DETEDTED

  Range of all-in-one printers HP Deskjet F380

  # At the time of the opening of the HP solution center to

  NO HP DEVICES HAVE BEEN DETEDTED

  # windows xp pro with sp 2

  # a printer install on pc (network printer hp 3055)

  gigabyte g41 combo #.

  Respect of
  Kundan Shinde

  Follow the steps from the link below:

  http://support.HP.com/us-en/document/c02468684

• Pro Tips: Troubleshooting scan to E-mail questions in e-all-in-one printers and ePrint

  Hello e-all-in-one printer users,.

  If you're reading this, chances are you have a problem of webservices in your HP e-all-in-one printer. If you can not scan to e-mail, use ePrint, or get a code application, this post is for you.

  Many of later vintage (2010 and beyond) Photosmart, ENVY and Officejet series e-all-in-one printers share the same Web services and Wireless features. Within these series printer, you can enable wireless and Web services (ePrint, scan to e-mail, printable sheets) connectivity of the façade do their installation for use with Android, Windows, iOS, Macand Chrome OS much simpler than the old printer models. Of course, when things go wrong or there is confusion about the use of the printer and features such as printing and scanning to e-mail stop working, the correction of these problems is the same in most of the models.

  WebServices are not connected: what affects?

  When the webservices connectivity is lost ePrint, scan to e-mailand pads features will stop working. If you are just getting started with the installation of your printer, the inability to generate a code application (to add your connected HP printer or sign in to Instant ink) can be attributed to not being able to afford Web services. If you are affected by any of these questions, read on. I have some suggestions that might help.

  Ordinary remedies

  • Before set you Web services, make sure that your printer is connected to a network, either via an ethernet cable or Wirelessconnection. Print a report of Network Configuration of your printer front panel (usually this is located under Tools / reports) to confirm an active ethernet connection.
  • If you are connected wireless, touch the wireless icon printer . If you see as connected and there is an IP addresses starting with 192.168... or, 10 grand. If this isn't the case, run the Wireless Setup Wizard to connect you with your network name (SSID) and enter the password wireless you are prompted.
  • Ensure that the date and time your printer settings are correct. You can check and adjust this via the front panel of the printer in most cases and trivia: the printer Web server integrated.
  • Now, with network connectivity guaranteed webservices icon or (depending on model) and try to activate Web services.
  • If you have managed to connect and a leaflet printed, or at the very least, an [email protected] address is displayed on the front panel of the printer, perfect, Web services are now functional. This means that you can now ask your HP printer connected , or use one of the above characteristics *.

  Note that ePrint and scan to e-mail feature are addressed later in this post if you still need help with these functions.

  • If the webservices are always not, try your printer restore default*.

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom @hpeprint.com address that it will be permanently deleted. For more information on custom addresses ePrint, click here.

  Here's how:

  • The printer's front panel, press the Setup/key icon and then tap tools
  • Select Restore to factory settings
  • Note this new printer may contain this setting under the heading maintenance of the printer instead of tools.

  Then, to reconnect to your network (wired or wireless) and try to set a manual DNS:

  Make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer), and then press Enter to go directly to this page. This should take you to your built-in Web server (EWS) printer.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.
  • Note that menu above EWS items can vary in overall models of printers. If you do not see the exact topics that I've listed here, the subtopic you should always appear on the Networking tab.

  Then, press the icon of Webservices or and reactivate your webservices (required for scanning to E-mail, ePrint , and other functions).

  Then, if a scan to e-mail question has led you to this position, tap the scan icon and enter the email address that you want to scan to.  Then, recover the PIN code that you should automatically receive by e-mail and complete your scan to E-mail setup by entering this PIN code in your printer.  Ideally, if you are able to get this good service will be fully functional.

  Alternatively, if ePrint is your main problem and all the above (except for scanning to E-mail steps) suggestions worked, try emailing your printer a print job. If it prints correctly, ePrint is back online. If you are a user of HP ePrint app, the app did automatically detect your printer? If not, go to the application settings and manually add your printer to the app using either ask you code or IP address of the printer. Finally, if you're a printable, user use your favorite applications on the front panel of the printer, or via HP connected.

  There are advanced troubleshooting steps beyond what I posted here and you can find them in the Forum such as displayed by the employees, Experts and members of the community. Start with the basics and if you still can't not to take advantage of Web services from your printer don't be shy to reach out - HP Support Forum's is a great place to exchange ideas and help each other to get the most out of our products.

  Thank you for taking the time to read. If you have any questions or comments do not hesitate to answer.

  All the best,

  Greetings,

  All new users to check in this thread, the first and the main post is a practical resource for webservices connectivity solutions.

  Try all the steps to recommend, as appropriate - if you encounter any problems apart from this I'll be happy to help you.

  Kind regards

• All-in-one HP Photosmart 3310: 2 HP inkjet printers different... same problem

  The time which was formerly set via the network apparently to I remember ever setting the time on one or the other. Today, I noticed for the first time that both of the printer are turned off as follows:

  HP Photosmart 3310 all-in-One - Time is 19:43 locally the printer indicates 19:12 (thirty minutes slow).

  HP Photosmart Premium Fax C309a series - time is 19:43 locally the printer indicates 19:35 (slow 8 minutes).

  Two of these printers previously seemed auto-sync the time on the display panel. Is it possible that my ISP has started to block the NTP port or something?

  Hmm, no, I just connected to 0.pool.ntp.org via ntpdate on my linux machine, and he was not blocked. So it's something on these printers has gone wobbly.

  Hi @tcagle53,

  Thanks for joining the Forums of HP Support with your request for time to printer.

  I understand that you have 2 printers and a HP Photosmart 3310 HP Photosmart Premium Fax, and each printer is showing incorrect. I would like to help.

  The printer usually have the user set the time and Date when the printer is in the configuration. Sometimes things like power outages or to unplug the printer can cause time to read properly.

  You can set the time to the correct time using the printer control panel.

  To set the time on the HP Photosmart 3310 device:

  

  To set the time on the HP Photosmart Premium Fax:

  1. press on the installation program button.

  2. press the button arrow down to select Preferencesand then press OK.

  3. press the down arrow button to select the Date and timeand press OK.

  I was not aware of the printers synchronization automatically at the time of the computer, but sometimes the built-in Web server (EWS of the printer) will have a setting "Synchronize with the time on the PC" that can be selected if the printer is used on a network.

  

  Once the built-in Web server is in charge there should be a tab somewhere near the top of the window.  If you click on Date and time parameters should be able to be selected on the left side. If the sync option of the printer with the computer time is available it usually a checkbox to check before you click apply. Printer not all have this option.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• All-in-one printer, HP Photosmart 3200 range

  My impressions are queued, but they don't communitcate with the printer!  I can not print!

  My impressions are queued, but they don't communitcate with the printer!  I can not print!

  You can ask in the HP Forum;

  HP and all-in-one - HP Support forum:
  http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjet For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Printers HP psc 1210 all-in-one

  I tried for days to install my HP psc1210 all-in-one printer on a desktop HP Windows Vista SP2 that my aunt gave me when she bought a new. First of all, I used the installation disk for my printer HP psc 1200 Series (which of course is not for Vista), everything worked except for the Director of printing. Site Web of HP said that I had to replace the Director with the Solution Center. I tried but nothing works. When I use the center of Solution and want to copy the same screen rises which made with the Director of printing, but when I try to run the copy my computer says that the printer is not connected.

  The printer is connected via a USB cable and I can print on various programs such as MS Word, Outlook, etc. I don't know what to do and I'm afraid if I don't buy a new printer, I don't want to mess up the computer. There the 1200 series in the list of printers that should work with Windows Vista.

  Thank you

  Hi wlb8227,

  If you are able to print from various programs, then you have the printer installed correctly. Here is a document on how to install this printer on a Vista computer. Let me know if you need assistance?

  http://support.HP.com/us-en/document/c00808543