Reader SD/mmc cards in dell vostro 1510 only not reading card when it is inserted

Similar Questions

• DELL Vostro 1510-drive not recognized

  The energy guy

  Does not have a will to w-OS/Vista DELL Vostro 1510 only not the DVD player. Alert manager says device "this device cannot start" - 10 of the Code. Yesterday tech DELL replaced DVD drive, used, boot disk Windows does not not diskW, said looks like a software problem. What I do next.

  Hello

  Dungeon involved Dell's Support until the problem is solved, check their documentation online and their
  forums.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  ------------------------------------------------------------------------------------------------------------------

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• (Redirected) Dell Vostro 1510 does not restart after the replacement motherboard (CPU the question!)

  Dear,

  I have a problem with my laptop (dell vostro 1510). For the second time my screen went completely black. I couldn't see anything, but the computer was not working. I assumed it was for the same reason as the first time (burnt video card). I have replace it with it and when I try to start the laptop I just get three led among that flashes on the left. It is not go further and I don't have access to the bios. The diagnostic led codes say it is a problem with the processor. How can I test if the processor work? For me, it's weird with the old motherboard, it began. I also tried to reset the CPU on a different time slot. I don't know what to try anymore.

  If you have any suggestions please let me know

  Have a nice day

  Gian

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• I/O device error code: 10 and if I can't open my memory SD/MMC card when it is inserted.

  Original title: why I can not open my card memory SD/MMC when inserted?

  What is the problem & how do I fix?  . I/O device error code: 10 when I try to read from memory card.  OS: XP, 32-bit Clean up memory and maintenance?  Never had a problem before.          Teddi

  Hi cindy,.

  Did you the latest changes on the system?

  You can read the following article and check if it helps.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

• Error code: Trying 80072F8F update windows after fresh install - Dell Vostro 1510 - (Windows 7 x 64 PRO)

  Hello, I'm trying to update windows after installation and I get error code 80072F8F.  After looking for other pages, I checked my BIOS date and time are correct and Windows as well.

  Laptop: Dell VOSTRO 1510
  Windows 7 x 64 PRO

  I already activated Windows (silly me to check everything actually works) and I need a solution as soon as POSSIBLE.

  I needed Windows update to try and fix a number display adapter (card intel not giving not external display resolutions)- but that's another question.

  I hope that there is a fix out there somewhere in the ether.

  -Giant_Cheeseman

  No anti-virus installed at the present time, no anti-spyware, no firewall.

  Repost: What were the problems you are experiencing that you thought that a "new facility" could solve?

  The foregoing notwithstanding, and since you neglected to install an antivirus application...

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• my sex cam dell vostro 1500 is not working or projection in Device Manager

  my sex cam dell vostro 1500 is not working or showing in the Device Manager, my cyberlink ucam tells me that there is no deevice of captuing.

  I really don't understand because the built-in webcam or imaging is supposed to show in the Device Manager, but it does not appear.

  I am using windows 7 ultimate.

  Hello

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ----------------------------------------------------------------------------

  Check with Dell Support, online documentation and drivers (update or reinstall), and
  their forums.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Dell Vostro 1510 Audio has stopped working after the update of Windows Vista.

  Nice day!

  My computer (vostro 1510) began to revolt recently and I wonder if you could help me with this.

  Basically, last week I was talking to my friend on Skype when suddenly my computer restarted due to the update of Windows (I have Windows Vista Business 32-bit). After he turned his back, I realized that there is no audio from the speakers. I tried using headphones but still - no sound.

  Immediately, I went to the 'Sounds' menu and checked if my speakers were still 'active '. They have been.
  Next thing I decided to do was to reinstall the Realtek audio driver, however, did not help or the other. Since then, I tried to reinstall several times but, unfortunately, everything remained the same.

  Then, I thought that maybe something was wrong with my hardware, however, audio spent ALL Dell diagnostics audio tests (so my hardware is very good, yes?). I also tried "System Restore" option and returned to the point before the update... Nothing has changed!

  In addition, as far as I know, all the audio settings in Windows (checked in Registry Editor) are OK.

  What should I do now? My last hope is to completely reinstall the system, however, I decided to contact you first.

  Thanks in advance!

  Solved the problem by reinstalling the operating system.

  Thank you!

• Do not get audio 5.1 of Dell Vostro 1510

  Hello

  I recently bought a Creative (Sound Blaster Live 24 bit external) external sound card for my Vostro 1510. I also bought a 5.1 nexw system Creatibve (SBS, A500).

  Since I have windows Vista installed on my laptop, I couldn't be able to get the 5.1 output. But now, I searched the external driver 24 bit for Vista and installed.

  The device works very well with the vista driver. but I'm not able to appreciate the sound 5.1 full. only 2 satellites and the subwoofer is to get the sound. another satellite 3 will not get sound. That is to say. I can hear only the front left and front right with the effect of the woofer. Back left, back right sattellites and centre do not get the sound.

  Is this a problem with vista driver or the sound card itself.

  Can someone please help?

  Message edited by vin_sinin on 06/10/2008 12:03 AM
  
  

• Dell Vostro 220 does not turn on

  Hello I have a Dell Vostro 220 desktop computer purchased in 2009.

  I noticed yesterday that is not switching on.  When the power cord is plugged into the outlet, I see a green light on the back on the power supply (under the voltage 110V setting) but that's all.  By pressing the push button on the front, nothing, absolutely nothing happens.  No fan, no LED inside.

  What can be wrong here? bad power supply or bad mother or push button simply bad diet?

  Any help will be greatly appreciated.

  Thank you

  ndhaya

  It is a Vostro 220 Mini-Tower

  No, the power supply fan does not work.

  Power LED button is also DISABLED

  No there are no beeps at all.

  Apart from the green power light on the back near the power cord, there is nothing else...

   
  ndhaya
   
  First, try to connect the power cord directly into another outlet and see if it makes a difference.
   
  No difference, then replace the power supply with a unit of work to 'know '.
   
  More generic standard ATX power supplies, with a 24-pin or 20 + power connector 4 - pin main motherboard, with or without the on/off switch, would be compatible with the Vostro 220 m

  You should be able to buy a compatible power supply either a local computer or online store.

   
  http://support.Dell.com/support/eDOCS/systems/vos220/en/SM/PSU.htm#wp1181010
   
  Bev.

• Why my computer will not collect my memory card when it is inserted into the slot

  I recently got a new memory card.  I wanted to put pictures on my computer but it will not pick up what I've inserted.  There is a green light, but nothing happens.  I have windows vista.  The last time that I did that it worked very well.  Can someone help me?

  The memory card is a "pro Duo' memory stick.  It's a 8GB.

  Then it is SDHC, and I guessed it was the problem almost certainly is. Card reader isn't most likely plain SD, SDHC, and he can't read the card.

• (Redirected) DELL VOSTRO 1510 DISPLAY GOES DIM

  It's been like that for a few years. When I connect on external monitor there is no problem at all. He often works when the external monitor is connected

  If I continue to use the FN + F8 change the choice between built-in-display + monitor, monitor, build-in-display... it works sometimes...

  not sure, will I be change the inverter / backlight / lcd?

  Any suggestions

  Thank you

  sujamana

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Fingerprint reader dell vostro 3750 is not detected after reinstalling windows 7

  If anyone can help?

  Can check you in Device Manager, if the drivers for the fingerprint reader is installed. If it is not installed, check the manufacturing site for update fingerprint drivers.

• Dell Vostro 420 - fan not mounted

  Hello

  I take my Vostro 420 with Core2Quad Q9650, but I would like to start making serious games with him, and I'm afraid that the CPU fan and chassis fan never accelerate ramp with the heat.

  I ran Prime95 x 64 with HWMonitor, temperature monitoring.  It is in the high 60s and the CPU fan stayed at 1300 rpm or more and the frame of the fan 800 rpm and has never changed.

  I tried to run Speedfan and it has correctly detected the fan speed, but I can't change it.  Speed already shows 100% which is incorrect, because I know that they are not turning at high speed and pressing on the top and bottom in SpeedFan has no effect.

  Can release you a BIOS update that corrects the inactive PWM fan control?

  Thank you

  Edit: I am aready using the 1.3.0 latest BIOS.

  Hello

  It is a Committee of OEM Foxconn (G45A01), and Dell just used a regular Phoenix BIOS (and has not paid for it.  BIOS string reads "Phoenix Bios of demo" or something like that).  There is no fan of detection failure, but I have the original fans in there.

  The regulator detects in Speedfan and the ROTATION speed is displayed correctly, but I can't change the speed.

  It is most likely a very simple solution.  Foxconn could fix for Dell in a jiffy ;)

  Thank you

• WiFi connectivity - the On / Off button on my Dell Vostro 1310 does not

  I can't have the WiFi button to enable the WiFi connectivity. I tried to update the drivers from the Dell site, but I thought that the material is missing.

  Any suggestions are welcome.

  Thank you

  Mervyn

  Hello

  As you say that you tried to update the wireless drivers, but were informed that the hardware connection Wi - Fi is 'missing '. I suggest that you either contact Dell or you could ask their Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• AMD Radeon 7400 (switchable graphics) on dell vostro 3350 does not work under Windows 8 (error code 43)

  Hello

  I just installed Windows 8 and switchable graphics does not work on the system. The most annoying is that I can't use the radeon graphics card, because the stop system it works.

  I've attached a screenshot of what I see:

  

  What I have tried to solve the problem:

  • Install the latest drivers AMD radeon HD (http://support.amd.com/us/kbarticles/Pages/AMDCatalyst1211betadriver.aspx)
  • Reinstall the driver built-in Intel (HD Graphics 3000)
  • The latest version of the A09 bios for laptop
  Nothing has worked.
  Switchable graphics worked very well under Windows 7 64-bit.
  Help, please!

  and the version of the driver: