Dell Vostro 420 - fan not mounted

Similar Questions

• my sex cam dell vostro 1500 is not working or projection in Device Manager

  my sex cam dell vostro 1500 is not working or showing in the Device Manager, my cyberlink ucam tells me that there is no deevice of captuing.

  I really don't understand because the built-in webcam or imaging is supposed to show in the Device Manager, but it does not appear.

  I am using windows 7 ultimate.

  Hello

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ----------------------------------------------------------------------------

  Check with Dell Support, online documentation and drivers (update or reinstall), and
  their forums.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• DELL Vostro 1510-drive not recognized

  The energy guy

  Does not have a will to w-OS/Vista DELL Vostro 1510 only not the DVD player. Alert manager says device "this device cannot start" - 10 of the Code. Yesterday tech DELL replaced DVD drive, used, boot disk Windows does not not diskW, said looks like a software problem. What I do next.

  Hello

  Dungeon involved Dell's Support until the problem is solved, check their documentation online and their
  forums.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  ------------------------------------------------------------------------------------------------------------------

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Dell Vostro 420 refusing of lights

  Hello.. I just recently acquired an old Dell Vostro 420 pc. There BIOS 1.3.0 and Core2Quad Q8300 processor.

  The question that I have is that most of the time he refuses to turn on. I press the power button and the blue led turns on for a second then turns off. The light on the power supply green all the time it is plugged into the wall outlet. After disconnecting the system from the power outlet for about two minutes and him plugging in, the machine will feed.

  I ran the Dell diagnostics on this machine and reported that everything is good. If I have a faulty power supply?

  I wasn't able to power my Vostro 420 upward after that main HQ was briefly interrupted.  The symptom was when I pushed the power button, click on it once and flashed yellow power light briefly once.  And that's all.  The power of the machine remained low.

  After working on it for a few hours, I noticed that I can always power the machine if I unplug the ethernet cable USB and mouse.  Once the machine turns on, I plug the mouse and cable network back in, it works fine.  Very strange!

  This feels like a motherboard problem?

• Dell Vostro 220 does not turn on

  Hello I have a Dell Vostro 220 desktop computer purchased in 2009.

  I noticed yesterday that is not switching on.  When the power cord is plugged into the outlet, I see a green light on the back on the power supply (under the voltage 110V setting) but that's all.  By pressing the push button on the front, nothing, absolutely nothing happens.  No fan, no LED inside.

  What can be wrong here? bad power supply or bad mother or push button simply bad diet?

  Any help will be greatly appreciated.

  Thank you

  ndhaya

  It is a Vostro 220 Mini-Tower

  No, the power supply fan does not work.

  Power LED button is also DISABLED

  No there are no beeps at all.

  Apart from the green power light on the back near the power cord, there is nothing else...

   
  ndhaya
   
  First, try to connect the power cord directly into another outlet and see if it makes a difference.
   
  No difference, then replace the power supply with a unit of work to 'know '.
   
  More generic standard ATX power supplies, with a 24-pin or 20 + power connector 4 - pin main motherboard, with or without the on/off switch, would be compatible with the Vostro 220 m

  You should be able to buy a compatible power supply either a local computer or online store.

   
  http://support.Dell.com/support/eDOCS/systems/vos220/en/SM/PSU.htm#wp1181010
   
  Bev.

• (Redirected) Dell Vostro 1510 does not restart after the replacement motherboard (CPU the question!)

  Dear,

  I have a problem with my laptop (dell vostro 1510). For the second time my screen went completely black. I couldn't see anything, but the computer was not working. I assumed it was for the same reason as the first time (burnt video card). I have replace it with it and when I try to start the laptop I just get three led among that flashes on the left. It is not go further and I don't have access to the bios. The diagnostic led codes say it is a problem with the processor. How can I test if the processor work? For me, it's weird with the old motherboard, it began. I also tried to reset the CPU on a different time slot. I don't know what to try anymore.

  If you have any suggestions please let me know

  Have a nice day

  Gian

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Reader SD/mmc cards in dell vostro 1510 only not reading card when it is inserted

  I have Dell vostro 1510 with vista and my sd mmc card reader does nothing when I insert a valid and unlocked SD mmc inside. ??

  Something to try:

  Insert the memory card into the correct location on the media player...
  If open windows... Close them.

  When the card is inserted... If you go to... Start / computer... is
  player card on one or several removable disks?

  Removable (e :)) drive
  Removable disk (e :))
  Removable drive (g)

  If_Yes_you can download photos from there. Left click
  the drive letter that corresponds to the SD card slot should
  display the directory of the card and you can copy and paste or
  Drag and drop the photos of your choice in a folder on your hard drive
  drive.

  Just a select group of photos do a right-click and choose... Copy...
  then navigate to the folder that you want, and then right-click the
  folder and choose Paste.

  And... maybe your AutoPlay settings must be modified:

  Windows Vista - Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista - AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Windows Vista - How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

• Dell Vostro 200 does not start after installing the SP2 for Windows Vista Business

  I have to keep which dates back to the system restore to get my computer on the road.  Whenever the update is installed I don't get past the first Screen Microsoft with the arrows.  Now, my computer is very slow and I have not been able to install SP2. I need very simple instructions I'm no computer expert!

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• WiFi connectivity - the On / Off button on my Dell Vostro 1310 does not

  I can't have the WiFi button to enable the WiFi connectivity. I tried to update the drivers from the Dell site, but I thought that the material is missing.

  Any suggestions are welcome.

  Thank you

  Mervyn

  Hello

  As you say that you tried to update the wireless drivers, but were informed that the hardware connection Wi - Fi is 'missing '. I suggest that you either contact Dell or you could ask their Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• Card micro SD from Dell place 8 do not mount on start-up.

  Hello, I recently bought the new meeting place 8 and so far it's been great, except that the SD card is not recognized when I recharge the tablet.

  The card works fine in all other respects, but have to remove and reinsert the card whenever I need to restart the Tablet is a pain.

  Anyone have any ideas on how to solve this problem?

  Hello, I noticed that too, you can do is put to sleep for a minute, and he finds the card, its certainly a compatibility problem, my old 1 gb sandisk card frame instantly. who is Chinese a 32 GB. I'll buy a new one, a mark this time and I'll let you know.

• AMD Radeon 7400 (switchable graphics) on dell vostro 3350 does not work under Windows 8 (error code 43)

  Hello

  I just installed Windows 8 and switchable graphics does not work on the system. The most annoying is that I can't use the radeon graphics card, because the stop system it works.

  I've attached a screenshot of what I see:

  

  What I have tried to solve the problem:

  • Install the latest drivers AMD radeon HD (http://support.amd.com/us/kbarticles/Pages/AMDCatalyst1211betadriver.aspx)
  • Reinstall the driver built-in Intel (HD Graphics 3000)
  • The latest version of the A09 bios for laptop
  Nothing has worked.
  Switchable graphics worked very well under Windows 7 64-bit.
  Help, please!

  and the version of the driver:

  

• Fingerprint reader dell vostro 3750 is not detected after reinstalling windows 7

  If anyone can help?

  Can check you in Device Manager, if the drivers for the fingerprint reader is installed. If it is not installed, check the manufacturing site for update fingerprint drivers.

• Vostro 420 USB ports cannot be turned off

  If you stop a PC, provide all power to the USB ports?

  If I keep my Dell Vostro 420, fans to keep silence and the PC shuts off, but it still powers the USB ports.

  Is this correct behavior?

  (I have two other PCs two Dells and when they stopped they provide NO power to USB ports)

  How do you know that the USB ports are always under tension after stopping?

  The answer to your question is "it depends." Some newer computers have PowerShare, which means at least one USB port is still under tension after the stop so that you can charge a device, for example, a cell phone, which is connected to the PC, even if the PC is turned off.

  See specifically PowerShare mentioned in none of the Vostro 420 docs, but this does not mean that it didn't.

  And remember, even if the PC is turned off, the motherboard continues to receive "electricity", as indicated by the LED on the motherboard that needs to be on whenever the PC is connected to a working outlet, even if the PC is turned off.

  You can connect the PC through a power strip and cut the tape off the PC normally in Windows, so there is no power to the wall. And if you set the BIOS to restart automatically after a power failure, the PC restarts automatically as soon as you turn on the power strip. Handy if you connect PC and monitor to the same Strip, so a switch on both and starts booting.

• Why is upgrade Windows 10 - not Dell Vostro 3550 on the list of Dell?

  I found this list on the Dell site that tells you if they tested a particular model for its ability to be upgraded to Windows 10.   The Dell Vostro 3550 is not on the list of 20 Vostro models, some wearing low model numbers, some superiors.   They will never test it?

  If you try to upgrade, windows 10 copies files and then in the 2nd of three main sections of the upgrade (where you have this big circle in the middle of the screen), it just goes to a blank screen and then ceases all activity of the disc, and it becomes well hung.   Of course, now the machine think operating system is win 10 and you cannot return to a recovery point 7 win.  If you lost all of your data and applications and restore the image and then install the windows 7 208 updates and it takes like 8 hours total.

  Looks like a similar problem that people with Vostro ranging from win 7 to win 8.   Why not fix it.

  Also, I fell into the same rabbit hole. But I realized quickly that it was a video problem and I hung on an alternative to the unit's LCD monitor... worked just fine, there has been able to do the update of bio and play with the drivers.

• Windows 8 compatibility with Vostro 420 BIOS v1.3.0

  Vostro 420
  Windows 7 64-Bi
  BIOS 1.3.0 (last update, version 2010)

  Hello:

  The Vostro 420 yourself running Windows 8 when it comes out next month?

  And the Vostro 420 DEP support bios? (I read Windows 8 needs a bios with the support of the DEP)

  Thank you

  Hello

  The Vostro 420 has not been tested by Dell with Windows 8. However if you use Windows 7 on your system it will avoid any compatibility issues.
  You can also check if hardware DEP is available on your system by performing the following steps.

  How to verify that hardware DEP is working in Windows:

  1. Click Start, click run, type cmd in the Open box, and then click OK.
  2. At the command prompt, type the following command and press ENTER:
     WMIC OS Get DataExecutionPrevention_Available
  3. If the output is "TRUE," hardware DEP is available.

  After the official launch of Windows 8, pilots cannot be available on the Dell support site. However, you can always check the site of the manufacturer for the appropriate drivers. You can also consult the following link for more information on the upgrade of Windows 8. http://Dell.to/SyrDsU