Receiver errors blue screen on LG phone to the computer connection.

Similar Questions

• I downloaded an update and restarted my computer, received the blue screen of death shortly after the computer restarts. Now it does not start

  I don't know when the downloaded update, the computer has been restarted on September 10, 2010 to install updates. Shortlyl once the computer is restarted, I got the blue screen of death.  with the details of error like:

  Stop 0 x 000000050 (0 x 000000000000000, 0xFFFFF88001DCAE4, 0xFFFFF8A00B490027, 0 x 00000000000002) do not know if the number of zeros is exactly right in one of those, but it's super frustrating.

  I tried to restart my computer in repair as recommended (get blue screen of death), I tried to reboot normally, loop just restart procedures asking if I want to restart in repair mode.  I tried SafeMode (BSOD), I tried to restart with last working restart (restart loops), I tried to choose the "Computer repair" BSOD I tried a diagnosis and all past.

  Help!

  Thank you.

  So yes actually hear nothing helped me.  Seems that, given that the computer is not stopped correctly and my hard drive was not recognized there starting the cycle upward or give me the BSOD.  Put it in my Ubuntu CD spare which I've had since my last PC hard drive became corrupt and force back across my hard drive.  After doing this, I was able to do a boot repair, who led for the BSOD.  Not sure how that actually fixed, lost about 10 hours of my day.  So I guess I can chalk up to Microsoft and a reminder on why I should buy Mac for now on... an update shouldn't really cause such problems.

  I get that not everyone has the same PC, so it is difficult to tell if an update is bad, but he should not do this and if an update is the cause of a certain segment of consumers who are updating must be taken down for everyone, or at least the users with the configuration that is known to have problems with an update.

  Problem is solved, had to go back to a previous version of good boot where I have not install updates again.  Now, I'm trying to understand who was was bad, so I can leave my computer knows to ignore.

  Nice day.

  Just in case someone needs to know how to use Ubuntu to back up files on their PC that does not load windows, please see the link below:

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer/

• I constantly receive error blue screen with the event ID 41.

  Original title: BlueScreen

  Hello!

  I bought a Dell PC Optiplex 760 in March 2013 and then I get constantly blue screen error. I changed my Rams and make many solutions but not yet settled. Can Microsoft if you please help me with this problem?
  Windows 7 Professional
  System
  -Supplier
  [Name]  Microsoft-Windows-Kernel-Power
  [Guid]  {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
  Event ID 41
  Version 2
  Level 1
  Task 63
  Opcode 0
  Keywords 0 x 8000000000000002
  -TimeCreated
  [SystemTime] 2013-05 - 05T 03: 48:14.769612800Z
  EventRecordID 17203
  Correlation
  -Execution
  [ProcessID] 4
  [ThreadID] 8
  Channel system
  AWAN computer PC
  -Security
  [User name]  S-1-5-18
  -EventData
  BugcheckCode 278
  BugcheckParameter1 0xfffffa8001c474e0
  BugcheckParameter2 0xfffff88003e45cb0
  BugcheckParameter3 0x0
  BugcheckParameter4 0x2
  Fake SleepInProgress
  PowerButtonTimestamp 0

  Hi Umer,

  The kernel power event 41 ID error occurs when the computer is off or it restarts unexpectedly. Starting a computer that is running Windows, a check is made to determine if the computer has been properly closed. If the computer was not closed properly, a kernel Power event 41 message is generated.

  I suggest you to refer to the article and check if it helps.

   

   

  Of core Windows event error ID 41 'the system has rebooted without cleanly close the first' in Windows 7 or Windows Server 2008 R2

  http://support.Microsoft.com/kb/2028504

  It will be useful.

• A blue screen when you work with the computer and not during inactivity TOP: 0x0000007A (0xFFFFFFFFC000000E, 0x000000004D393884, 0xFFFFF6FB40000108, 0xFFFFF68000021000)

  Hi, computer my mom sometimes stops during work or simple browsing the internet on youtube, Skype, etc.

  The error string is:

  STOP: 0X0000007A (0XFFFFFFFFC000000E, 0X000000004D393884, 0XFFFFF6FB40000108, 0XFFFFF68000021000)

  Physical memory dump FAILED with status 0xC0000010

  Not really sure what to do

  I went in cmd, CHKDSK came and it was planned for the next boot. However, he has taken that a few seconds for the start and has not really accomplish something. I'm used to a 3-5 minute long CHKDSK process.

  Any help is appreciated.

  Kind regards

   We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

  
  

  If you use the blue screen view, which has crashed, or a similar application, don't.  They are wrong at least as often they are correct

• Satellite L450D-128: how to fix intermittent errors blue screen Crash?

  My computer suffered several errors blue screen for a month, and I need help to fix it. I've already posted this question on the forums of Windows 7, but received no reply and therefore no help.

  I use a Satellite L450D-128. I installed Windows 7 Home Premium 64-bit.
  According to the .dmp files, most of the accidents were caused by the ntoskrnl.exe file that is part of the windows OS.

  Can someone tell me the best way to look at/fix this file?

  Hello

  The ntoskrnl.exe seems to be part of the kernel to boot Microsoft.
  In my view this file or this process should not create a BSOD
  Have you checked if the new installation of the OS could solve this problem?

  Given that the BSOD may be linked to serious problems or hardware problem
  Therefore, you should try new fresh OS installation to check if the system is not affected
  Otherwise I recommend that you check the RAM modules (perhaps running a memtest86 +)

  What do you think of this?

• Help with error blue screen. BCCode: 116

  Hi, I get the following error message:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1053

  More information about the problem:
  BCCode: 116
  BCP1: FFFFFA8010AFC4E0
  BCP2: FFFFF8800FC9E7A0
  BCP3: FFFFFFFFC000009A
  BCP4: 0000000000000004
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  You can see here .dmp file:

  https://onedrive.live.com/redir?RESID=ED0BFFB73C652EF7! 126 & authkey =! AFdh-tv9C-zKTsA & ithint = the file % 2cdmp

  Hello

  Error checking 116, {fffffa8010afc4e0, fffff8800fc9e7a0, ffffffffc000009a, 4}

  Probably caused by: nvlddmkm.sys (nvlddmkm + 9a57a0)

  nvlddmkm.sys as of 07/02/2014 Nvidia video drivers.

  fffff880 '0f2f9000 fffff880' 0ff87000 nvlddmkm T (no symbol)
  Loaded symbol image file: nvlddmkm.sys
  Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
  Image name: nvlddmkm.sys
  Timestamp: Wed Jul 02 10:42:02 2014 (53B4446A)

  1. check with Nvidia Support, their drivers and documentation online and ask in their forums

  on known problems. Update the video driver. If there is no newer, you will need to come back
  for a more stable version.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  2. check with ASUStek support, their drivers and documentation online and ask in their forums

  on known problems. Updated BIOS, drivers of low level chipset and on-board major and
  separate device drivers.

  BiosVersion = 0205
  BiosReleaseDate = 01/08/2011
  SystemManufacturer = ASUSTeK Computer Inc..
  SystemProductName = CG8565
  Family = Desktop
  BaseBoardManufacturer = ASUSTeK Computer Inc..
  BaseBoardProduct = CG8565
  BaseBoardVersion = Rev 1. XX

  ASUS - Service<-- includes="" live="">
  http://www.service.ASUS.com/

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  3 use ALL other methods in the troubleshooters below and in the next message.

  =============================================================

  Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  ------------------------------------------------------------

  References to Vista also apply to Windows 7.

  Have you updated your screen/video or other large recent drivers - check in Control Panel.
  Updates of Windows to see if a driver has been loaded it. Use this generic utility below
  and when you get to the section driver use the methods in the next message and then back to
  the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
  cause this error.

  Also check with the support of system Maker and video/display of the map because he could be called
  questions - also check in their forums.

  BCCode: 116 0 x 00000116

  Bug Check 0 x 116: VIDEO_TDR_ERROR
  

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt to reset display driver and recover a timeout failed.

  Important info if you received a STOP Code
  

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  VIDEO_TDR_ERROR settings

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The pointer to the context internal TDR recovery, if they are available.
  2	A pointer to the loaded device driver module (for example, the owner tag).
  3	The error code of the last operation that failed, if they are available.
  4	Reserved.

  BCCode: 116 0 x 00000116<-- read="" this="">
  * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

  --------------------------------------------------------------------------------

  The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
  special meaning (other than pilot caused bluescreens occur with some frequency).

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error blue screen on Satellite Pro A10

  Hello

  I try to help my in-laws with their SPA10 Pro Satellite. I had set this up for them a few months ago and it was working fine.
  Now it reboots about two seconds after the "use last good configuration ' screen etc, gets to the screen again then restarts immediately to infinity, never a break on error message for long enough to see what he says.
  I managed to boot from the Windows XP home and got disc with respect to the repair or continue with the installation screen. When I asked the computer don't either TI stuck on blue screen almost immediately. The error message is
  STOP: 0X000000C5 (0X00000002, 0X00000001, 0X00000000, 0X8082B98B)

  This is beyond my skill level, someone can help?
  Thank you

  Hello

  It is not easy to tell what the problem is here and what your in-laws have made with this device. Try to start the machine in safe mode by pressing F8 at the beginning upward. What unit starts check a bit if some strange software is installed.

  If there is no important data, I advise you to install the new OS. On this way, you will be sure that it is not because of software. If the problem persists then is the question is more complicated and there may be a hardware failure.

  At the moment I can't tell you more. Try to make the clean OS install and post again on the results.

• Satellite L505-13W shows error blue screen

  My error on blue screen shows computer laptop SATELLITE L505-13W.
  The operating system is started and after some time, it shows a blue screen error and restarts.

  Even after repair successful when restarting requested repair, he showed the same error.
  So I tried to recover with the recovery cd, but it turned out to be a tragedy.

  He eraced my complete HDD to stone age and smiled saying recovery is not possible.

  Please help me...

  Hello

  If the laptop can not be recovered using the recovery disc, then it feels the hardware problem.
  Are you sure that your recovery disc is OK?
  Have you tried to install the OS using another installation disc?

  Perhaps it would be useful to check if the problem could be related to defective recovery disk, but if the BSOD (blue screen of death) appeared before the installation of the OS, I would say that the problem can be caused by an internal hardware malfunction

  It would be necessary to check the modules of RAM and HARD drive.
  HARD drive can be verified by using the diagnostic software from disk as Drive Fitness Test (freeware)

  RAM could be checked with a tool like memtest, but you need a system to market, then in this case, you can not check the RAM using a software that I recommend to remove a module and test the laptop using a module in each slot

• Satellite A300D-1EI - error blue screen display - drivers did not have

  I bought my laptop about a month ago.
  Everything is working great except two errors 'blue screen' caused by the graphics card.

  Both were when the laptop was connected to the TV via the S-video port.
  First was when the computer screen turns off after 15 minutes while watching a movie on resume says that the display drivers did not have, and then I got the blue screen. Then I updated the site Web of ATI display drivers and set the computer screen goes out.

  All were ok with no problems, until last night when I got another message that the display drivers did not follow a blue screen.

  I wonder if this is problem to drive or there is a problem with my graphics card.

  System information:
  Processor: Intel Core 2 Duo T8400 CPU @ 2.26 GHz
  Memory (RAM live): 3.00 GB
  System type: 32-bit Windows Vista Edition Home Premium
  Graphics card: ATI Mobility Radeon HD 3470

  If long you use ATI driver ATI support page it is not possible to say anything on this subject.
  This driver is not tested and Toshiba does not offer any help on this matter.

  So what you can do is to install OS using recovery media and see what will happen in the future. Please test extensively with the own operating system preinstalled. Do not install anything that can have some negative influence this game or additional applications, codecs or something similar.

  Test it please and tell us if the problem persists.

  When you want to watch movies on television in the first passage to the TV and then start the DVD player.

• Chromebook 11 - error blue screen bsod system 895 32. exe how can I get rid of this? screen cannot be deleted.

  Chromebook 11 - error blue screen bsod system 895 32. exe how can I get rid of this? screen cannot be deleted.

  [Moved from Virus & Malware]

  In case you see something similar...

  

  (photo source: https://malwaretips.com/blogs/remove-debug-malware-error-895-system-32-exe-failure-popup/ )

  ... you can normally just use the Task Manager to exit your browser (' end task'), and the pop-up should be gone. Please visit: http://answers.microsoft.com/en-us/protect/forum/protect_other-protect_scanning/potential-malware-blue-screen-with-dialog-box-on/3569bb1b-c05e-4247-98dc-6bf22da581e0

• I have an error blue screen - Stop: c000021A (fatal system error) status 0f 0x000004t

  What is the status of Stop: c000021A (fatal system error) 0f 0x000004t.07 that it is a blue error screen that is displayed when the computer tries to boo

  Hello

  You can check this link:

  How to solve an error "STOP 0xC000021A.

  http://support.Microsoft.com/kb/156669

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• Closing with error blue screen Vista computer

  My computer guard stop, blue screen gives a reference to the device driver and a kernel stack. Also the following in my reports: problem event name: MpTelemetry
  Signature of the 01:2152759308 problem
  Signature of the problem 02: not specified
  Signature of the problem 03: ScanFile
  Signature of the problem 04: 3.0.8107.0
  Signature of the problem 05: Microsoft Security Essentials (EDB4FA23-53B8-4AFA-8C5D-99752CCA7094)
  Signature of the 06 problem: not specified
  Signature of the problem 07: unspecified
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 2057

  Can someone point me in the right direction to solve this problem.

  Hello

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• 116 error blue screen (1557 DELL i7)

  original title: blue screen (1557 DELL i7)

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  More information about the problem:

  BCCode:                                              116

  BCP1:                                                   CF644008

  BCP2:                                                   91A3DB86

  BCP3:                                                   00000000

  BCP4:                                                   00000002

  OS version: 6_1_7600

  Service Pack: 0_0

  Product:                                              256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\071110-14508-01.dmp

  C:\Users\BAHMAN\AppData\Local\Temp\WER-30404-0.SysData.XML

  Read our privacy statement online:

   http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  Best Rigard (Bahman Hosseini)

  Hello

  Best chance for a quick solution is to check with the manufacturer of device video and Dell to updated
  driver (or re-install those present).

  Check with Dell technical support, online documentation and drivers and their known forums
  issue.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  ----------------------------------------------------------------------------

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - first two responses.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/8df6485a-50cc-4cdc-BE3E-0f05c7745117

  ---------------------------------------------------------------------------

  Have you updated your screen/video or other large recent drivers - check in Control Panel.
  Updates of Windows to see if a driver has been loaded it. Use this generic utility below
  and when you get to the section driver use the methods in the next message and then back to
  the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
  cause this error.

  Also check with the support of system Maker and video/display of the map because he could be called
  questions - also check in their forums.

  BCCode: 116 0 x 00000116

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt
  to reset the display driver and recover a time-out has failed.

  BCCode: 116 0 x 00000116<-- read="">
  * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

  --------------------------------------------------------------------------------

  Inclusion error code 116 in the resolution of problems is the only coincidence and has no specific
  which means (other than the driver caused bluescreens occur with some frequency).

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all the)
  possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• NMI:Parity error blue screen

  I have problem with blue screen with any program at any time. It is as it should be a hardware problem. When I run the Diagnostics on my computer everything seems to check out OK.

  Hello drichardson3,

  ·         You get this error blue screen randomly on your computer?

  ·         What exactly is the diagnostic test that you have run on the computer?

  The checking of NMI Parity error is an error related to a defective hardware on your computer. This is mainly caused by a faulty RAM.

  To resolve this problem, you may need to check on the RAM, I suggest you contact the manufacturer of your computer to check the hardware that does not work properly.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.