Recovery procedure

Similar Questions

• My googlemail is blocked due to a forgotten password, but google for the recovery procedure continues to send me round in circles.

  My frozen Googlemail account a few days ago, and I had to use the procedure of recovery to thaw, which included a series of new passwords, provided by Google, which I was told that I would not need to memorize or note down. After a few hours of work successfully, the program froze again and so I am unable to receive or forward all e-mail messages. Google asks me to use the procedure "forgotten password", but I don't know what password is the system, and I continue to be sent in a circle to the same pages.
  I would be grateful for any positive suggestions and thank you in advance.

  Hi frederickwilliams, I'm sorry, but I don't think that we have no way to help you with a recovery procedure for a service of third party, unfortunately...

• Satellite A100 system goes to a black screen after the recovery procedure

  I tried running the recovery CD, I received on my cell phone. the process perfectly, (I have only one CD, I don't know if I need a second). At the end of the process, I have the option to insert the second CD, or jump.
  Because I don't have that one CD I have support on ignore.

  I tells me that the installation is complete and I can restart my system.
  Then I removed the disk and I tried to reboot the system. The system goes to a black screen (on which he indicates that Microsoft load) and then crashes. That was the problem I was facing before recovery.

  Basically, the recovery process has not worked. I don't think I did something very wrong, unless I need a second CD. What could be the problem?

  Help me please!

  Hello

  The A100 is one of the new series of laptops and AFAIK the image of Toshiba was placed only on a CD (DVD) recovery.
  I think that the message and the possibility to insert the second CDconfuses a little.

  In my opinion the black screen and freeze has nothing to do with the recovery procedure and the new installation if Windows OS.
  Due to the fact that this problem has occurred until you have installed the OS from the recovery CD, I assume that there must be something wrong with the hardware.

  But it s very interesting to know if the same problem appears after the new installation of Windows from the original CD of Microsoft.

  It's worth a try.

• F8 - HARD drive recovery procedure, cannot open a session

  Im trying to start the HARD drive retrieve using this tutorial:

  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  and uptill now ive never been able to take the selection of keyboard layout that my hard drive is not proeprly work but finally ive today managed to cross twice in a row, but instead of a log on screen as the tutorialshows, I get a box with a red and white circle X, he says something in sense of I need to log in before I can use this feature and communicate with my administration system Press ok to restart. So, how can I do so im automatically logged until I reached this point is there anything I can do in the bios I can access only no problems without it crashing.

  Thnx, Ross

  All the HARD drive recovery procedure has nothing to do with the BIOS.

  Your story is quite confusing and I don t understand this with red and white circle X.
  I made repeated several times and have never seen anything like it.
  I can imagine that recovery image is missing, and as a result, you get this message.

  Can you please tell me on which stage you have problems? Maybe you can take a picture?

  Just click NEXT in step 2.
  To step 3 remember your username is just a (the same as the Windows logon). If you use the password put it there but otherwise just leave it blank and click NEXT.

• Satellite A100 loads the operating system correctly after the recovery procedure

  Hello

  I'm in trouble... I used the recovery CD last week after my laptop developed problems. After the recovery procedure, when I turn on the pc, it loads directly in mode 'Owner' - the pilot of the internet has no charge, Norton AV, supplied with the pc does not load. Basically, it's a shadow of his former self.

  And when I try and start the recovery process, that it doesn't... it does not read the disc.
  I know that the recovery process did not work properly cos when I look in C: it shows that 60 GB of data is present on the hard disk, so the recovery is not cleaned the hard drive at all.

  The only way I can describe it, is that the pc is in some sort of limbo. I can't access the original account I created.

  The recovery disk is still okay because I "explored" the drive on another computer and it contains all the data.

  Help, please.

  Looks a bit the problem I have with an A100 recovery disk. Mine formatted PC, unpack
  a load of stuff and then freezes.
  See...
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31292

  Like you, I can read the DVD in another PC. I wonder if there is a batch of duff of recovery DVD?

  I think I'll try to install XP from a different installation disk. It'll be a bit of a pain in the neck
  because it will not authenticate with MS, but at least he's going to prove whether or not the hardware of the laptop is duff.

  I'll post back here when (if) I get anywhere.

• Qosmio F10 does not work after the recovery procedure

  Hi, I just bought the toshiba recovery dvd for my qosmio laptop f10, I put the dvd in and it goes through the process of recovery and complete 100% he then told me to remove the dvd, and then press CTRL ALT DELETE to restart the computer.

  In doing so, he gets to the screen were it tells me windows startup and then the screen turns white and flickers a couple of times, and then the computer phone re boots and don't stop doing that, I press the F8 key when it restarts to go save mode, but when it starts in mode it tells me that windows is not completely set and goes no further and tells me that I need to run put in place to new.

  I don't have a windows cd only toshiba dvd that should put my laptop back to factory settings.

  Can aynone help me before I have sound toshiba?

  Thank you.

  Hello

  It's not easy to say why it happens. Usually, the Toshiba Recovery CD should work properly and after any recovery procedure, the laptop should run without any problems.
  You suggested that you ordered this CD from recovery of the ASP.
  Do you have the right recovery CD? Check the description of CD.

  The other possibility is that the device has a hardware failure. In this case, you must contact the service of Toshiba. Sorry, but that's all I can suggest.

  concerning

• Satellite A30: HDD size after the recovery procedure and Defrag

  I have a Satellite A30 and just did a complete reinstall from the recovery of the product disks. My question relates to the amount of disk space hard should be resumed aftre reinstall it.
  My hard drive is 4.95 full GB according to the procedure that is much higher than I expected.

  Also, after reviewing the reader with Defragmenter I seem to have twice taken up training with Greens, unmovable files like Blue contiguous files. Unmovable files is there and if not how to I remove them?

  It's where I guess that extra hard disk space is lost when it is lost?

  Thank you

  Hello

  It's not easy to say exactly how much space should be taken after the recovery procedure.
  I have so much that I know on the recovery CD, you will find the whole operating system Windows XP, driver Toshiba and utilities as well as additional software like OneNote, WinDVD, etc.
  This additional software could take as much space on the disk outside the OS.

  Blue not moveable files belong to the Windows operating system, and as a result, the files are placed together.

• Satellite M45-S269 - A:\GHOST output. ERR during the recovery procedure

  I am trying to perform a full system restore. I get to the part that says "exit A:\GHOST. MADE A MISTAKE? »

  If I do Y or N the message says "cannot read files. If the problem persists, contact TOSHIBA support center or contact symantec technical support.
  Then the recovery fails.

  Clues?

  Hello

  Looks like it's not possible to read from the recovery disc.
  How did you perform the recovery procedure?

  You have inserted the right recovery disk and started from this disk. Right?
  Usually, recovery is expected to begin and the installation should run smoothly

  If this is not the case then recovery disks would be destruction, scratched, etc.

  Just a question; is it possible to start using other disk bootable CD original Win XP or Linux?
  Select this check box, because it would allow to discover exactly what s wrong

• Qosmio G30 - problem after the system recovery procedure

  I Qosmio G30 - 148 who have Windows XP MCE, trying to download some system programs crashed and make automatic restart.

  I then used a RECOVERY CD to recover my system all and followed the instructions on the CD but when finished and restart the system, a famous blue screen telling me there is a problem in my system and windows must be restarted.

  When restarting in safe mode, it is a message telling me that the system is not fully installed. Please, rerun the Setup program.

  You could any body help me in this problem because it's a strange problem?

  Note: I tried to install Windows XP from external CD but the system did not have the hard drive.

  You are right. It's a really strange problem. I don't know if you use some external devices but before you start recovery procedure please remove all connected devices.
  The fact is that this recovery image is designed for this model of laptop and the specific hardware configuration. If the BSOD occurs after the installation of the image it takes little hardware related issue.

  I don't really have any other explanation. Problem is that no one here will be able to offer an accurate diagnosis, and we can only speculate what may be the problem.

  Try to do it again to the recovery facility, but if the problem persists I fear that you need professional help.

• Z5771 the Bios recovery Procedure

  Black's screen/no post problem.

  What is the keyboard shortcut or the CORRECT for the bios recovery procedure?

  Everyone made a SPI flash using ROM_RECOVERY_HEADER?

  Me he fixed, SPI flash using ROM_RECOVERY_HEADER

  Thanks for your help

• IPS recovery procedure - error

  Hello guys...

  I forgot the password for module AIP-SSM-10 and try to recover break it. It works 5.x and so I have to make a recovery. on the recovery procedure, the image copy to tftp server system and throws the below error message...

  Slot-1 772 > Bad magic number (0 x-47cd60cf)

  Slot-1 773 > restart Autoboot error...

  Slot-1 774 > reboot...

  any suggestion on wht could be the reason and how to on this subject?

  Thank you

  AJ

  the file being attempted to install isn't what they expected the ROMMON of the MSS.

  The Image file of the system was damaged during the download.

  OR the attempt of the procedure of the System Image with one file other than a System Image.

  There are several types of files for IPS and their use is often confused.

  For example:

  For version 2.0000 E3, there were 3 different files for the AIP-SSM-10:

  The system image:

  IPS-SSM_10-K9-sys-1.1-a-6.1-2-E3.img

  -For installation through ROMMON or more technically the "module hw-module 1 recover...» "order of the SAA. Install a complete Image of the system on the MSS and erases all previous data from the SSM.

  NOTE: This is the type of file to be used in the method you follow.

  Update:

  IPS - K9 - 6.1 - 2 - E3.pkg

  -To upgrade from an earlier version of the sensor to this new version. It converts the previous configuration to work with the new version.

  Recovery partition:

  IPS-K9-r-1.1-a-6.1-2-E3.pkg

  -For the upgrade JUST the SSM recovery partition. The recovery partition can be used for recovery with the "application-recovery partition" command in the sensor CLI.

  There may be some confusion here, because this file is the 'Recovery' image, BUT is NOT used with the command "recover the hw-module module 1" of the SAA.

  Instead, the Image of the 'system' is what is used with the command "recover the hw-module module 1.

  If you find that you do not use the correct file type (unkowingly used a upgrade or recovery file), then download the System Image file and try again.

  If you use the System Image file, then check the size and md5 checksum of the file and compare it to what is on cisco.com. It was damaged during the download from cisco.com and you may need a new download of the file.

  If the checksum md5 and size of the file is the file on cisco.com, check your TFTP server. Using a 3rd attempt of machine for the file from the tftp server tftp. Once the tftp would check the size and md5 checksum to verify that your TFTP server is able to serve the entire file. You want to make sure your TFTP server is not truncate your file for download.

• On Satellite A60 Pro BIOS recovery procedure?

  Hello after updating of the procedure of flash, computer power not on. (only 3 seconds)
  Bios recovery how?
  Sorry for my English.
  Thank you for your help.

  + English only! +

  + The message was edited by: ADMIN +.

  Sorry to hear that. Unfortunately I m afraid BIOS is screwed up, and you will not be able to recover.

  On this forum I found an interesting thread - http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54395

  Check it out. Maybe this will help. If not I'm afraid you need professional m help with it.

• Equium A100-147: I get an error during the recovery procedure

  Hi again,

  I had trouble with my equium a100-147.
  I tried a restore, but the disc is scratched so I phoned in ESL and it snet me a new recovery image.

  I tried the new recovery disk and am now errors when I boot the disk.

  error is

  "internal error crc file: \WINDOWS\$NtUninstallKB895200$\msdtctm.dl.

  any suggestions are welcome. get really annoyed with my machine as my warranty expired only one month

  Thank you

  Hmm... I studied a bit and it looks a bit like a malfunction of the partition.
  It would be desirable to boot from the original CD of Microsoft XP and to start the repair console.
  Then you could try these various commands which help to repair the boot manager, repair errors, locate bad sectors and recover readable information.

  -fixboot
  -fixmbr
  -bootcfg /rebuild
  -chkdsk /r

  If this does not help, you should erase the entire partitions and must format the HARD drive in NTFS file system. Then access the BIOS and set it to the default value.
  Once this procedure tries to start again on the new recovery CD!

  Good bye

• Satellite C670D-19th - recovery procedure cannot be completed

  Hello

  I recently bought from recovery disc for my laptop.

  However after the first disc ends it tells me to insert the second medium wich of recovery must contain the next part of the recovery (15535xsp9.swm).

  To bad it does not work and I hope someone has a way to understand it.

  Teun

  Hello

  Problem is that there is nothing you can do about it and it is not possible to force recovery to complete procedure correctly. Either it works or not.
  I guess that something goes wrong with the creation of recovery disks and my opinion is that you should contact Arvato if you order it it and explain the situation. They should send you a new recovery disk.

• NB10-T-106 - issues of recovery procedure

  SatPro NB10-T-106 came pre-installed with Win 8 and I upgraded successfully to Win 8.1.
  Created recovery disks (set of 3) DVDs and disc #1 seems to work when the PC is restarted with key f12. It's very different to the previous routines 'restore' to Win Xp and Win7.

  QUESTION 1: How is it possible to select a partition (drive c) to prevent the deletion of data on other leave? (I have two others were leaving).

  QUESTION 2: Vignette product ID (formerly product key) does not exist.
  My computer is a Toshiba Refurb so is this the reason? System summary lists a product ID special that ends with AAOEM. The string is not the code to 25 normal numbers, but only 20 digits starting 00191. Where can I find to win 8.1 Product ID?

  I use Toshiba laptops for a long time now started with old Satellite 1800 with Windows XP Home edition.
  In my opinion the installation procedure is based on the same principle. Install recovery disc is bootable media and installation of recovery is very simply.

  Q1: Detailed information on the installation of recovery image that you can find on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  Q2: all I know is that each recovery image is already activated and whenever you install original recovery image you need not enter the product key for the activation of the operating system. This product key cannot be used to activate Windows if you use a different Windows installation disc so in general, you don't need at all.

• P20: Can I recover the data after the recovery procedure?

  Hello
  I have a toshiba P20, when I buy, I made 2 partitions, C program and the BONES and F to my personal data.

  I use the restore tools toshiba to restore my windows XP OS, but the restore tools has also reset my partition table and I don't know if I can restore my personal data.

  Everything is done in one step and I saw no warning to say that my partition table will be reset?

  It's just a fdisk or a format really has been done.

  Can I use a tools for restore my partition to lose data?

  I hope that there is an acceptable solution to this problem and in a near future, I'll buy an external HD to perform the backup.

  Hello Alex

  If you want to preinstall the device with the recovery media, you can do this in two different ways:
  -standard mode will be formatted the whole HARD disk and after the procedure of recovery on the HARD drive is just a single partition.
  -expert mode using this mode, you can create partitions if the HARD disk has only one, and you will be able to install the OS on the first partition (the other guy)

  Of course, you did using the standard mode and now the whole HARD disk is formatted. I'm not 100% sure, but in this case only fast format is done before the beginning of the procedure of the facilities. Try to find (Google) if there is a tool that can help you verify if all the data is gone. Using recovery media there is no way to do it.

  Drive external HARD is the right solution for the data backup.

  Good bye