Reference Dell 17R n7110 - No. Gigabit ethernet

Similar Questions

• (Redirected) Reference DELL 17R SE 7720 - how to change the startup disk of 1 TB mechanical mSATA SSD drive

  I installed a 250GB SSD mSATA. I want Windows to run this SSD and not the 1 TB drive. How can I do this?

  Hi rajivthakar,

  Please repost this in the forum of discs to help.

  http://en.community.Dell.com/support-forums/disk-drives/

• Reference Dell R210 II - update the Firmware on Centos 6

  Hello

  I have several dell servers connecting a mix of OS linux centos 5/6 for windows and xen etc.

  I have run it on every Linux machine to install the dell tools:

  wget - q - O - http://linux.dell.com/repo/hardware/latest/bootstrap.cgi | bash
  yum install srvadmin-all firmware-tools - y
  yum install $(bootstrap_firmware) y
  srvadmin - services.sh status
  / opt/dell/srvadmin/sbin CD.
  update_firmware - Yes

  on centos 5 is very well and on some centos 6 machines too. However, a new server got us set up this week, the following error occurs, I want to know how to solve this problem, so I can perform upgrades in the usual way via command line:

  Root@server[/opt/Dell/srvadmin/sbin]# update_firmware - Yes

  Inventory of the currently running system.

  Search the directory for storage of the available BIOS updates...
  Checking the BIOS - 2.2.3
  Available: dell_dup_componentid_00159 - 2.2.3
  Did not find a new installation package that meets all the checks of the facility.
  Verification of rev NetXtreme II Gigabit Ethernet 20 (em2) - 7.2.20 BCM5716
  Available: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd) - 7.4.8
  Found update: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd) - 7.4.8
  Check the system BIOS to PowerEdge R210 II - 2.2.3
  Did not find a new installation package that meets all the checks of the facility.
  Verification of rev NetXtreme II Gigabit Ethernet 20 (em1) - 7.2.20 BCM5716
  Available: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd) - 7.4.8
  Found update: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd) - 7.4.8

  Found the firmware that needs to be updated.

  Updates running...
  -Installation of pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_... Package installation failed: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd)
  -7.4.8.
  aborting update...

  The command to low-level error message was:

  Unable to parse xml output, bad for the package: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd)
  Root@server[/opt/Dell/srvadmin/sbin]#

  the specification of the server:

  Reference Dell R210 II

  Intel Quad Core 3.2 Ghz
  16 GB of Ram
  CentOS 6.4 x 64
  1 x 256 GB SSD

  ChrisDuk112,

  Could you do me a favor and see if that solves the problem for you.

  the remount mount - o, suid, exec/tmp

  Let me know how it goes.

• Reference Dell 6224 and 5448

  Hi team,

  I'm new dell switches - exposed to cisco switches. I am faced with new kinds of problems with these dell switches. Unable to provide a fix and fight for the last 5 days. Pls help me. Below is my script

  Two nw - 2.0 and 3.0 is required to be configured in VLAN, VLAN ID 2 and 3.

  VLAN 2 - 192.168.2.1

  VLAN 3 - 192.168.3.1

  N/W 2.0 and 3.0 N/W machinery will be shared 48-Port powerconnect switch 5448 DELL

  The routing part arrives at 6224 power connect - gateway for vlan 2 - 192.168.2.1 and bridge for VLANs 3 - 192.168.3.1

  The switch of two is ascending through fiber optic - spf port cable

  This is the configuration I did-

  5448 switch-

  database of VLAN

  VLAN 2, 3

  output

  interface vlan 2

  switchport access vlan 2

  GVRP enable

  Routing

  output

  interface vlan 3

  switchport access vlan 3

  GVRP enable

  Routing

  output

  interface ethernet 1/you/1

  switchport mode general

  VLAN allowed switchport General add 2.3

  GVRP enable

  output

  interface ethernet 1/g1

  switchport access vlan 2

  GVRP enable

  output

  interface ethernet 1/g2

  switchport access vlan 3

  GVRP enable

  output

  Uplink port is TE1 (Layer 2) to XG2 (Layer 3)

  Reference Dell 6224 can connect

  Configure the terminal

  interface vlan 2

  no downtime

  IP 192.168.2.1 255.255.255.0

  Routing

  output

  interface vlan 3

  no downtime

  address 192.168.3.1 IP 255.255.255.0

  Routing

  output

  interface ethernet 1/xg2

  switchport mode general

  VLAN allowed switchport General add 2.3

  GVRP enable

  Computer with 192.168.2.100 / 24 GW 192.168.2.1 connected to layer 2 switch g1 - vlan 2

  When I ping 192.168.2.1 - accessible United Nations host destination

  Even the wise

  Computer with 192.168.3.100 / 24 GW 192.168.3.1 connected to layer 2 switch g1 - vlan 3

  When I ping 192.168.3.1 - accessible United Nations host destination

  Any thing that has missed out in the configuration part / all bad entries. I'm not sure now how to treat this. Pls help me and it is an urgent task for me

  Thank you

  With multiple VLANs, you need to use the general/Trunk mode. With the help of the info we have I made a diagram to help show the location of the switches and parameters on them. Obviously things can be different, such as PVID, IP address, VLAN ID etc are all customizable to your needs. But the page layout modes and the port will remain the same.

  

  STP will not fill the VLAN on the other switches. It's probably the GVRP feature it refers. With such a short race, it is more practical to manually add the VLAN. At least for the initial Setup, then once everything works enable GVRP to accommodate future expansion of VLAN.

  Hope this helps some.

• This device cannot start. (Code 10) Windows 7 64 bit JMicron PCIe Gigabit Ethernet Adapter

  Apparently, I get this error at random times in the day.  My ethernet port just no longer works and I tried disabling and reactivation that used to (a while back) work.

  Then recently I was disabling and re-enabling it, it gets stuck in the 'disabled' and this error message appears when I open "Properties".  I tried to reinstall the drivers for the device with the CD of my laptop came with, but that has not worked so I looked on the site Web of Jmicron and found a newer driver who, after installing again, did not work.  I have a fixed work wireless, but not with no LAN no is a pain in the thigh.

  WIndows 7 64 bit Home Premium edition
  Sager NP 5165 Notebook
  JMicron PCI Express Gigabit Ethernet adapt

  Try to update the laptop bios and chipset software provided by your computer laptop oem (dell, hp, whoever). Fixed an instance I had 10 with a device error.

• Reference Dell FS12-NV7 information?

  Hello

  There is a seller on eBay unloading a bunch of servers listed as "Dell FS12-NV7" models They have a list of equipment of: 2 x 6 AMD processors, 32 GB of RAM, 12 (no drive included) HARD disk trays, dual-port gigabit ethernet (looks like on board, not an addon card) and a power supply non redundant-500W. I googled and searched on the dell site, but I can't seem to find information on this model. Some results push me towards EquiLogic systems, but I don't think that's what it is. Can anyone out there shed light on it?
  If it pans, I could take one buy an extra (or even replace) ESX host and combine it with my current NAS. But I need to know what are these things before I bite :). The photos have no serial number, and when I asked for one, the salesman said that there is no serial number or code express service on it, which seemed weird.

  We see a lot of them (or similar models) here on the forums... they are not standard models of Dell; they are special make-up-made by Dell, for some company, according to their specifications.  They seem to rely on the "cloud" servers Dell (the latter the C2100 or C6100), because they have very similar features and appearance.  They have good features, but just to go because you will get no documentation or support (including drivers and firmware) from Dell.  If you buy it, buy it as a generic white box server and not as a Dell.

• Dell Inspiron n7110 graphics and games graphics problems and screen resolution

  I have a dell Inspiron n7110 with 8 GB of ram and a processor intel core i3 and I recently changed my windows 7 home premium to ultimate because no product key for the ultimate version. I don't know why the games graphics and graphics are so low. The screen resolution is also is not very clear and my resolution is completely upward. The resolution of the screen used to be clear before I changed versions of windows 7. I have to buy a better graphics card? Do I need to make updates to pilot any? And if I do not need a new graphic card can anyone give me suggestions. Any help is appreciated, thanks

                                                                            
  ------------------------------------------------------------------------
  Processor: | 6.5.
                                                                                          
  (Vivid RAM) memory. 7.4.
  Graphics card: | 1.0 scale to under-score = Lowest-1, 0-7, 9 - higher
  Icon games | 1.0
  Main hard drive | 5.9

  Assuming that your laptop is the exact model as well as the review below it uses
  a Nvidia GT 525 m. This card has a reasonable performance, so the score should be higher.

  During the reinstallation of Win7, you must also reinstall the graphics as well as all of the current versions
  the other drivers (BIOS is not always necessary) after download from DELL.

  http://www.Dell.com/support/drivers/us/en/19/product/Inspiron-17R-n7110

  In most cases the laptop graphics upgrade is not possible, and where possible it is generally not cost-effective as adapters for laptops cost more expensive for a given with PC model.

• Broadcom netxtreme 57xx gigabit ethernet is not supported to install esx 3.5

  Hello

  I use my laptop Dell E5420 workstation 6. When I try to install esx 3.5 in my computer, it's show error message as port of networking is not supported. Then I tried to install esxi 3.5 in the same system. His installation, but I have not found all of the network adapters. Physical system I have broadcom netxtreme 57xx gigabit ethernet. I changed little in vmx file, but not all.

  Please help me

  I hope that you use WS 6.5?
  you will miss at least the line

  ethernet0.virtualDev = "e1000".

  Take a look at this vmx - worked in nice on Workstation 6.5

  config.version = '8 '.
  displayName = "esx35i."
  ethernet0. Present = 'TRUE '.
  ethernet0.virtualdev = "e1000".
  Ethernet1. Present = 'TRUE '.
  Ethernet1.virtualdev = "e1000".
  floppy0. Present = "FALSE".
  guestOS = 'other '.
  IDE1:0. AutoDetect = 'TRUE '.
  IDE1:0. DeviceType = "cdrom-image".
  IDE1:0. FileName = 'VMware-VMvisor-InstallerCD - 3.5.0 - 82664.i386.iso.
  IDE1:0. Present = 'TRUE '.
  memsize = "1024".
  Monitor.virtual_exec = "hardware".
  monitor_control.restrict_backdoor = 'true '.
  numvcpus = '1 '.
  scsi0. Present = 'TRUE '.
  scsi0.virtualDev = "free".
  scsi0:0. FileName = "esx35i - system.vmdk".
  scsi0:0. Present = 'TRUE '.
  Sound.Present = "FALSE".
  virtualHW.version = "6".

• Reference Dell T310 - laboratory home

  Hi all

  I want to buy 2 of the Dell Poweredge T310 server for my laboratory at home to practice and prepare for my VCP certification. Here is the specification I chose and please let me know if this is compatible and I'm good to go set up my lab, I have to make changes to these specifications? I have not ordered any RAID controllers and do I really need?

  PowerEdge T310 chassis with up to 4 hard drives and Quad Pack LED Diagnostics
  Delivery charges for PowerEdge T310
  16 GB 1333 MHz UDIMM memory
  X 3430 Xeon processor, 2.4 GHz 8 MB Cache, Turbo
  PowerEdge T310 heatsink of heat
  No controller
  No operating system
  Gigabit network adapter double built-in
  Controller BMC
  Cable for optical drive SATA for PowerEdge T310
  Integrated SATA, 1-4 hard drives connected to the integrated SATA - no RAID controller

  250GB 7.2 k RPM Serial ATA 3Gbps 3, cable 5po hard drive

  250GB 7.2 k RPM Serial ATA 3Gbps 3, cable 5po hard drive
  Non-redondante 375W PSU

  Thanks in advance,

  I found the focus check tracking if help http://communities.vmware.com/message/1475041

  I am looking in HCL - check result.

  Research: Your search for "Systems" returned 2 results.
  Display:

  Name of the partner	Model	CPU series	Supported releases
  REFERENCE DELL	PowerEdge T310	Intel i3/i5 Clarkdale series	ESX 4.1 U1 4.1 4.1 U1 4.1 ...
  REFERENCE DELL	PowerEdge T310	Intel Xeon 34xx series Lynnfield	ESX 4.1 U1 4.1 4.1 U1

  ? deviceCategory = Server & productid = 10062 & releaseid = 142 & deviceCategory Server = & partner = 23 & keyword = t310 & page = 1 & display_interval = 10 & sortColumn = partner & sortOrder = Asc "> 4.1 ...

  Please, do not forget the points of call of the "useful" or "correct" answers

  Mauro Bonder - moderator

• Cannot configure embedded card Gigabit Ethernet...

  Hello

  I am using Bootcamp 2.x with 10.6.x on a 2011 end pro macbook.

  Is Windows XP SP3

  I want (I need) using the integrated Ethernet Gigabit 10/100/1000 BASE-T, but cannot configure it!

  My Broadcom 802.11n wireless card is in place and works fine

  Documentation of the specifications Apple says:

  • Gigabit built-in 10/100/1000BASE-T Ethernet (RJ-45 connector)

  When I ran PC-Wizard, he told me:

  Network card:

  BCM57765 of Broadcom NetXtreme Gigabit Ethernet PCIe

  If I go to computer management program and open the list of Device Manager

  Card Ethernet is not visible in the list of network... and control has a ethernet cards? icon...

  How to proceed with the installation?

  Any advice?

  Thanks in advance

  You have the DVD with drivers?

  See also install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

• Satellite C660: fast ethernet or gigabit ethernet?

  Hi all

  No matter what owners here Satellite C660 series?
  Looking at various Web sites, the common consensus is that the C660 series is not equipped with gigabit ethernet, but with regular fast ethernet.

  Can anyone confirm or deny that please?
  Does or does not gigabit ethernet?

  Thank you very much
  Kind regards
  Rene Fennet

  What Satellite C660 do you have exactly?

• envy h8 1559: there is no such thing as RTL8171EH-CG Gigabit Ethernet Controller.

  Hi Hp.

  My Network RTL8171EH-CG controller do not exist in the system. I use all the command lines that I know not, but nothing.

  what I get from ip link: lo: LOOPBACK, upward, LOWER_UP > mtu 65536 qdisc noqueue State UNKNOWN mode DEFAULT default group
  link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00.   Is - fixable?   Tkanks

  Hi,: RTL8171EH-CG Gigabit Ethernet Controller was destroyed because I removed the video card and ram to upgrade to them.

  I bought an ethernet card external usb 3.0 and it's all good now.   Good bye.

• Maid in Gigabit Ethernet Adapter

  Hello

  I bought a bolt of lightning for gigabit ethernet card.

  Could someone give me a pointer in the implementation to connect to the Internet using this? Can't seem to get it to connect.

  I use a MacBook Pro el capitan

  Thank you very much

  If the Ethernet on your Mac has stopped working recently - Apple supports

  This might help

• Thunderbolt to Gigabit Ethernet adapter not working

  Hello

  I'm new to this community has never had a problem on my mac since I had last year.  MacBook Pro retina mi 2014 running El captain.

  My ethernet is not picking up DHCP and thunderbolt ethernet does not appear in the network interface.

  I use also fell in love with VGA Converter works on the two test port.

  I also reset the PRAM and the MSC still nothing.  Also restored some peripheral preference to another forum I found on the internet.

  I created another account from administrator to test to see if the interface resumes, still nothing.  How ever wifi works without problem

  Thanks in advance if anyone could help with my problem.

  Dump of information systems presents its collection as below.

  Bolt of lightning to Gigabit Ethernet Adapter:

  Name of seller: Apple Inc..

  Device name: Thunderbolt to Gigabit Ethernet Adapter

  Vendor ID: 0 x 1

  Device ID: 0 x 8003

  Revision of the device: 0x1

  UID: 0X0001000203A8FCF0

  Apple serial number: DTN450706APDWKHBZ

  Route of chain: 1

  Firmware Version: 5.5

  Port (upstream):

  Status: Connected device

  Link status: 0x2

  Speed: up to 10 Gb/s x 1

  Port Micro Firmware Version: 0.0.8

  I have this problem as well. My crush to the ethernet adapter was working yesterday, but now I have not been able to run all day. I even tried everything said in this thread: ImtiazThunderbolt Ethernet does not work after upgrade to Yosemite , you should try what is in the thread, as it has worked for some people.

• Gigabit Ethernet through AirPort Extreme

  I just got a gigabit home connection. If I connect my iMac via ethernet to gigabit municipal internet provider modem, II can get about 800 Mbps download based on the file netspeed.com. Nice.

  However, when I use my Airport Extreme as a router ethernet (put the extreme between the iMac and the modem) my speed drops to about 1/10 of that.

  None of the devices that I currently own are capable of handling 802.11 ac, so I know I could not anywhere near gigabit wireless speeds. But it would be nice to have the fastest speeds on the one machine I intend to connect via ethernet, then connecy to the extreme wireless.

  Airport Extreme really limit the ethernet so? Is there a setting I can adjust for more fast ethernet routing?

  If the AirPort Extreme 802.11ac is configured as a DHCP and NAT router, then the WAN to LAN speed will be limited to about 300-400 Mbps.  Check the results here:

  http://www.SmallNetBuilder.com/tools/charts/router/view

  If the AirPort Extreme is configured in Bridge Mode, then you would expect to see 600 - 700 MB/s speed this way.

  http://www.SmallNetBuilder.com/tools/charts/router/bar/75-LAN-to-Wan

  If you don't see results, then the AirPort Extreme is not to negotiate properly with your modem speeds.  Unfortunately, Apple has removed all the settings to manually adjust WAN port on the AirPort Extreme 802.11ac speed, so there is not much you can do others try a few unusual things...

  One of them would be to insert a Gigabit Ethernet switch between modem and AirPort Extreme to see if it will negotiate better speeds like that

  Another would be to try an Ethernet cable between the modem and AirPort Extreme cross.

  If none of these things help, then you should ask Apple to replace the AirPort Extreme to you and hope for more luck in the next test.